NAME

    DBIx::BatchChunker - Run large database changes safely

VERSION

    version 0.90

SYNOPSIS

        use DBIx::BatchChunker;

        my $account_rs = $schema->resultset('Account')->search({
            account_type => 'deprecated',
        });

        my %params = (
            chunk_size  => 5000,
            target_time => 15,

            rs      => $account_rs,
            id_name => 'account_id',

            coderef => sub { $_[1]->delete },
            sleep   => 1,
            debug   => 1,

            process_name     => 'Deleting deprecated accounts',
            process_past_max => 1,
        );

        # EITHER:
        # 1) Automatically construct and execute the changes:

        DBIx::BatchChunker->construct_and_execute(%params);

        # OR
        # 2) Manually construct and execute the changes:

        my $batch_chunker = DBIx::BatchChunker->new(%params);

        $batch_chunker->calculate_ranges;
        $batch_chunker->execute;

DESCRIPTION

    This utility class is for running a large batch of DB changes in a
    manner that doesn't cause huge locks, outages, and missed transactions.
    It's highly flexible to allow for many different kinds of change
    operations, and dynamically adjusts chunks to its workload.

    It works by splitting up DB operations into smaller chunks within a
    loop. These chunks are transactionalized, either naturally as
    single-operation bulk work or by the loop itself. The full range is
    calculated beforehand to get the right start/end points. A progress bar
    will be created to let the deployer know the processing status.

    There are two ways to use this class: call the automatic constructor
    and executor ("construct_and_execute") or manually construct the object
    and call its methods. See "SYNOPSIS" for examples of both.

    DISCLAIMER: You should not rely on this class to magically fix any and
    all locking problems the DB might experience just because it's being
    used. Thorough testing and best practices are still required.

 Processing Modes

    This class has several different modes of operation, depending on what
    was passed to the constructor:

  DBIC Processing

    If both "rs" and "coderef" are passed, a chunk ResultSet is built from
    the base ResultSet, to add in a BETWEEN clause, and the new ResultSet
    is passed into the coderef. The coderef should run some sort of active
    ResultSet operation from there.

    An "id_name" should be provided, but if it is missing it will be looked
    up based on the primary key of the ResultSource.

    If "single_rows" is also enabled, then each chunk is wrapped in a
    transaction and the coderef is called for each row in the chunk. In
    this case, the coderef is passed a Result object instead of the chunk
    ResultSet.

  Active DBI Processing

    If an "sth" (DBI statement handle object) is passed without a
    "coderef", the statement handle is merely executed on each iteration
    with the start and end IDs. It is assumed that the SQL for the
    statement handle contains exactly two placeholders for a BETWEEN
    clause. For example:

        my $update_sth = $dbh->prepare_cached(q{
        UPDATE
            accounts a
            JOIN account_updates au USING (account_id)
        SET
            a.time_stamp = au.time_stamp
        WHERE
            a.account_id BETWEEN ? AND ? AND
            a.time_stamp != au.time_stamp
        });

    The BETWEEN clause should, of course, match the IDs being used in the
    loop.

  Query DBI Processing

    If both a "sth" and a "coderef" are passed, the statement handle is
    executed. Like the "Active DBI Processing" mode, the SQL for the
    statement handle should contain exactly two placeholders for a BETWEEN
    clause. Then the $sth is passed to the coderef. It's up to the coderef
    to extract data from the executed statement handle, and do something
    with it.

    If single_rows is enabled, each chunk is wrapped in a transaction and
    the coderef is called for each row in the chunk. In this case, the
    coderef is passed a hashref of the row instead of the executed $sth,
    with lowercase alias names used as keys.

  DIY Processing

    If a "coderef" is passed but neither a sth nor a rs are passed, then
    the multiplier loop does not touch the database. The coderef is merely
    passed the start and end IDs for each chunk. It is expected that the
    coderef will run through all database operations using those start and
    end points.

  TL;DR Version

        $sth                             = Active DBI Processing
        $sth + $coderef                  = Query DBI Processing  | $bc->$coderef($executed_sth)
        $sth + $coderef + single_rows=>1 = Query DBI Processing  | $bc->$coderef($row_hashref)
        $rs  + $coderef                  = DBIC Processing       | $bc->$coderef($chunk_rs)
        $rs  + $coderef + single_rows=>1 = DBIC Processing       | $bc->$coderef($result)
               $coderef                  = DIY Processing        | $bc->$coderef($start, $end)

ATTRIBUTES

    See the "METHODS" section for more in-depth descriptions of these
    attributes and their usage.

 DBIC Processing Attributes

  rs

    A DBIx::Class::ResultSet. This is used by all methods as the base
    ResultSet onto which the DB changes will be applied. Required for DBIC
    processing.

  rsc

    A DBIx::Class::ResultSetColumn. This is only used to override "rs" for
    min/max calculations. Optional.

 DBI Processing Attributes

  min_sth

  max_sth

    DBI statement handles. When executed, these statements should each
    return a single value (to be used by "fetchrow_array" in DBI), either
    the minimum or maximum ID that will be affected by the DB changes.
    These are used by "calculate_ranges". Required if using either type of
    DBI Processing.

  sth

    If using "Active DBI Processing" (no coderef), this is a do-able
    statement handle (usually DML like INSERT/UPDATE/DELETE). If using
    "Query DBI Processing" (with coderef), this is a passive DQL (SELECT)
    statement handle.

    In either case, the statement should contain BETWEEN placeholders (one
    for the beginning and one for the end of the range), as it will be
    executed with the start/end ID points.

    Required for DBI Processing.

  count_sth

    A SELECT COUNT statement handle. Like "sth", it should contain BETWEEN
    placeholders. In fact, the SQL should look exactly like the "sth"
    query, except with COUNT(*) instead of the column list.

    Used only for "Query DBI Processing". Optional, but recommended for
    chunk resizing.

 Progress Bar Attributes

  progress_bar

    The progress bar used for all methods. This can be specified right
    before the method call to override the default used for that method.
    Unlike most attributes, this one is read-write, so it can be switched
    on-the-fly.

    Don't forget to remove or switch to a different progress bar if you
    want to use a different one for another method:

        $batch_chunker->progress_bar( $calc_pb );
        $batch_chunker->calculate_ranges;
        $batch_chunker->progress_bar( $loop_pb );
        $batch_chunker->execute;

    All of this is optional. If the progress bar isn't specified, the
    method will create a default one. If the terminal isn't interactive,
    the default Term::ProgressBar will be set to silent to naturally skip
    the output.

  progress_name

    A string used by "execute" to assist in creating a progress bar.
    Ignored if "progress_bar" is already specified.

    This is the preferred way of customizing the progress bar without
    having to create one from scratch.

  cldr

    A CLDR::Number object. English speakers that use a typical 1,234.56
    format would probably want to leave it at the default. Otherwise, you
    should provide your own.

  debug

    Boolean. If turned on, displays timing stats on each chunk, as well as
    total numbers.

 Common Attributes

  id_name

    The column name used as the iterator in the processing loops. This
    should be a primary key or integer-based (indexed) key, tied to the
    resultset.

    Optional. Used mainly in DBIC processing. If not specified, it will
    look up the first primary key column from "rs" and use that.

    This can still be specified for other processing modes to use in
    progress bars.

  coderef

    The coderef that will be called either on each chunk or each row,
    depending on how "single_rows" is set. The first input is always the
    BatchChunker object. The rest vary depending on the processing mode:

        $sth + $coderef                  = Query DBI Processing  | $bc->$coderef($executed_sth)
        $sth + $coderef + single_rows=>1 = Query DBI Processing  | $bc->$coderef($row_hashref)
        $rs  + $coderef                  = DBIC Processing       | $bc->$coderef($chunk_rs)
        $rs  + $coderef + single_rows=>1 = DBIC Processing       | $bc->$coderef($result)
               $coderef                  = DIY Processing        | $bc->$coderef($start, $end)

    The loop does not monitor the return values from the coderef.

    Required for all processing modes except "Active DBI Processing".

  chunk_size

    The amount of rows to be processed in each loop.

    Default is 1000 rows. This figure should be sized to keep per-chunk
    processing time at around 10 seconds. If this is too large, rows may
    lock for too long. If it's too small, processing may be unnecessarily
    slow.

  target_time

    The target runtime (in seconds) that chunk processing should strive to
    achieve, not including "sleep". If the chunk processing times are too
    high or too low, this will dynamically adjust "chunk_size" to try to
    match the target.

    Turning this on does not mean you should ignore chunk_size! If the
    starting chunk size is grossly inaccurate to the workload, you could
    end up with several chunks in the beginning causing long-lasting locks
    before the runtime targeting reduces them down to a reasonable size.

    Default is 0, which turns off runtime targeting.

  sleep

    The number of seconds to sleep after each chunk. It uses Time::HiRes's
    version, so fractional numbers are allowed.

    Default is 0, but it is highly recommended to turn this on (say, 5 to
    10 seconds) for really long one-off DB operations, especially if a lot
    of disk I/O is involved. Without this, there's a chance that the slaves
    will have a hard time keeping up, and/or the master won't have enough
    processing power to keep up with standard load.

    This will increase the overall processing time of the loop, so try to
    find a balance between the two.

  process_past_max

    Boolean that controls whether to check past the "max_id" during the
    loop. If the loop hits the end point, it will run another maximum ID
    check in the DB, and adjust max_id accordingly. If it somehow cannot
    run a DB check (no "rs" or "max_sth" available, for example), the last
    chunk will check all the way to $DB_MAX_ID.

    This is useful if the entire table is expected to be processed, and you
    don't want to miss any new rows that come up between "calculate_ranges"
    and the end of the loop.

    Turned off by default.

    NOTE: If your RDBMS has a problem with a number as high as whatever
    max_integer reports, you may want to set the $DB_MAX_ID global variable
    in this module to something lower.

  single_rows

    Boolean that controls whether single rows are passed to the "coderef"
    or the chunk's ResultSets/statement handle is passed.

    Since running single-row operations in a DB is painfully slow (compared
    to bulk operations), this also controls whether the entire set of
    coderefs are encapsulated into a DB transaction. Transactionalizing the
    entire chunk brings the speed, and atomicity, back to what a bulk
    operation would be. (Bulk operations are still faster, but you can't do
    anything you want in a single DML statement.)

    Used only by "DBIC Processing" and "Query DBI Processing".

  min_chunk_percent

    The minimum row count, as a percentage of "chunk_size". This value is
    actually expressed in decimal form, i.e.: between 0 and 1.

    This value will be used to determine when to process, skip, or expand a
    block, based on a count query. The default is 0.5 or 50%, which means
    that it will try to expand the block to a larger size if the row count
    is less than 50% of the chunk size. Zero-sized blocks will be skipped
    entirely.

    This "chunk resizing" is useful for large regions of the table that
    have been deleted, or when the incrementing ID has large gaps in it for
    other reasons. Wasting time on numerical gaps that span millions can
    slow down the processing considerably, especially if "sleep" is
    enabled.

    If this needs to be disabled, set this to 0. The maximum chunk
    percentage does not have a setting and is hard-coded at 100% +
    min_chunk_percent.

    Used only by "DBIC Processing" and "Query DBI Processing". For the
    latter, "count_sth" is also required to enable chunk resizing.

  min_id

  max_id

    Used by "execute" to figure out the main start and end points.
    Calculated by "calculate_ranges".

    Manually setting this is not recommended, as each database is different
    and the information may have changed between the DB change development
    and deployment. Instead, use "calculate_ranges" to fill in these values
    right before running the loop.

 Private Attributes

  _loop_state

    These variables exist solely for the processing loop. They should be
    cleared out after use. Most of the complexity is needed for chunk
    resizing.

    timer

      Timer for debug messages. Always spans the time between debug
      messages.

    start

      The real start ID that the loop is currently on. May continue to
      exist within iterations if chunk resizing is trying to find a valid
      range. Otherwise, this value will become undef when a chunk is
      finally processed.

    end

      The real end ID that the loop is currently looking at. This is always
      redefined at the beginning of the loop.

    prev_end

      Last "processed" value of end. This also includes skipped blocks.
      Used in start calculations and to determine if the end of the loop
      has been reached.

    max_end

      The maximum ending ID. This will be $DB_MAX_ID if "process_past_max"
      is set.

    last_range

      A hashref of keys used for the bisecting of one block. Cleared out
      after a block has been processed or skipped.

    last_timings

      An arrayref of hashrefs, containing data for the previous 5 runs.
      This data is used for runtime targeting.

    multiplier_range

      The range (in units of "chunk_size") between the start and end IDs.
      This starts at 1 (at the beginning of the loop), but may expand or
      shrink depending on chunk count checks. Resets after block
      processing.

    multiplier_step

      Determines how fast multiplier_range increases, so that chunk
      resizing happens at an accelerated pace. Speeds or slows depending on
      what kind of limits the chunk count checks are hitting. Resets after
      block processing.

    checked_count

      A check counter to make sure the chunk resizing isn't taking too
      long. After ten checks, it will give up, assuming the block is safe
      to process.

    chunk_size

      The current chunk size, which might be adjusted by runtime targeting.

    chunk_count

      Records the results of the COUNT(*) query for chunk resizing.

    prev_check

      A short string recording what happened during the last chunk resizing
      check. Exists purely for debugging purposes.

    prev_runtime

      The number of seconds the previously processed chunk took to run, not
      including sleep time.

    progress_bar

      The progress bar being used in the loop. This may be different than
      "progress_bar", since it could be auto-generated.

CONSTRUCTORS

    See "ATTRIBUTES" for information on what can be passed into these
    constructors.

 new

        my $batch_chunker = DBIx::BatchChunker->new(...);

    A standard object constructor. If you use this constructor, you will
    need to manually call "calculate_ranges" and "execute" to execute the
    DB changes.

 construct_and_execute

        my $batch_chunker = DBIx::BatchChunker->construct_and_execute(...);

    Constructs a DBIx::BatchChunker object and automatically calls
    "calculate_ranges" and "execute" on it. Anything passed to this method
    will be passed through to the constructor.

    Returns the constructed object, post-execution. This is typically only
    useful if you want to inspect the attributes after the process has
    finished. Otherwise, it's safe to just ignore the return and throw away
    the object immediately.

METHODS

 calculate_ranges

        my $batch_chunker = DBIx::BatchChunker->new(
            rsc     => $account_rsc,  # a ResultSetColumn
            ### OR ###
            rs      => $account_rs,   # a ResultSet
            id_name => 'account_id',  # can be looked up if not provided
            ### OR ###
            min_sth => $min_sth,      # a DBI statement handle
            max_sth => $max_sth,      # ditto

            ### Optional but recommended ###
            id_name      => 'account_id',  # will also be added into the progress bar title
            chunk_size   => 20_000,        # default is 1000

            ### Optional ###
            progress_bar => $progress,     # defaults to a 2-count 'Calculating ranges' bar

            # ...other attributes for execute...
        );

        my $has_data_to_process = $batch_chunker->calculate_ranges;

    Given a DBIx::Class::ResultSetColumn, DBIx::Class::ResultSet, or DBI
    statement handle set, this method calculates the min/max IDs of those
    objects. It fills in the "min_id" and "max_id" attributes, based on the
    ID data, and then returns 1.

    If either of the min/max statements don't return any ID data, this
    method will return 0.

 execute

        my $batch_chunker = DBIx::BatchChunker->new(
            # ...other attributes for calculate_ranges...

            sth       => $do_sth,       # INSERT/UPDATE/DELETE $sth with BETWEEN placeholders
            ### OR ###
            sth       => $select_sth,   # SELECT $sth with BETWEEN placeholders
            count_sth => $count_sth,    # SELECT COUNT $sth to be used for min_chunk_percent; optional
            coderef   => $coderef,      # called code that does the actual work
            ### OR ###
            rs        => $account_rs,   # base ResultSet, which gets filtered with -between later on
            id_name   => 'account_id',  # can be looked up if not provided
            coderef   => $coderef,      # called code that does the actual work
            ### OR ###
            coderef   => $coderef,      # DIY database work; just pass the $start/$end IDs

            ### Optional but recommended ###
            sleep             => 5,    # number of seconds to sleep each chunk; defaults to 0
            process_past_max  => 1,    # use this if processing the whole table
            single_rows       => 1,    # does $coderef get a single $row or the whole $chunk_rs / $sth
            min_chunk_percent => 0.25, # minimum row count of chunk size percentage; defaults to 0.5 (or 50%)
            target_time       => 15,   # target runtime for dynamic chunk size scaling; default is off

            progress_name => 'Updating Accounts',  # easier than creating your own progress_bar

            ### Optional ###
            progress_bar     => $progress,  # defaults to "Processing $source_name" bar
            debug            => 1,          # displays timing stats on each chunk
        );

        $batch_chunker->execute if $batch_chunker->calculate_ranges;

    Applies the configured DB changes in chunks. Runs through the loop,
    processing a statement handle, ResultSet, and/or coderef as it goes.
    Each loop iteration processes a chunk of work, determined by
    "chunk_size".

    The "calculate_ranges" method should be run first to fill in "min_id"
    and "max_id". If either of these are missing, the function will assume
    "calculate_ranges" couldn't find them and warn about it.

    More details can be found in the "Processing Modes" and "ATTRIBUTES"
    sections.

PRIVATE METHODS

 _process_past_max_checker

    Checks to make sure the current endpoint is actually the end, by
    checking the database. Its return value determines whether the block
    should be processed or not.

    See "process_past_max".

 _chunk_count_checker

    Checks the chunk count to make sure it's properly sized. If not, it
    will try to shrink or expand the current chunk (in chunk_size
    increments) as necessary. Its return value determines whether the block
    should be processed or not.

    See "min_chunk_percent".

    This is not to be confused with the "_runtime_checker", which adjusts
    chunk_size after processing, based on previous run times.

 _runtime_checker

    Stores the previously processed chunk's runtime, and then adjusts
    chunk_size as necessary.

    See "target_time".

 _increment_progress

    Increments the progress bar.

 _print_debug_status

    Prints out a standard debug status line, if debug is enabled. What it
    prints is generally uniform, but it depends on the processing action.
    Most of the data is pulled from "_loop_state".

SEE ALSO

    DBIx::BulkLoader::Mysql, DBIx::Class::BatchUpdate, DBIx::BulkUtil

AUTHOR

    Grant Street Group <developers@grantstreet.com>

LICENSE AND COPYRIGHT

    Copyright 2018 Grant Street Group

    This program is free software; you can redistribute it and/or modify it
    under the terms of the the Artistic License (2.0). You may obtain a
    copy of the full license at:

    http://www.perlfoundation.org/artistic_license_2_0