; ; Initialisation File for BayCom-PR-Soft on an IBM-PC von DL8MBT / DG3RBU ; ----------------------------------------------------------------------- ; (update V1.40 21.05.91) ; ; english on ; Reports English/German ; ; The Construction of this file is relatively tolerant. Empty Lines/ ; Characters may be at used at any place, the row following the Command ; is able to be written in either Upper or Lower Case. It executes only a ; very rough check of the presented Values. So it is accordingly advisable ; to make a Backup of this File before making any alterations. Then in a ; Crisis situation there is a reference avaiable. ; ; All Characters after a ;-Symbol in a Line will be ignored ; ; This Parameter File will be read by PARA.EXE, when L2.EXE is run again. ; This occurs if SCC.PAR cannot be found or alterations have been made in ; SCC.INI since it was last run. ; The same Parameters as are here will be saved in SCC.PAR, but in a Machine ; Readable Format, so that it is much faster in operation, and also so that ; it is easier for alterations to be made. ; ; ; ; Limiting Data for the RAM Store Management and Port Operation ; ------------------------------------------------------------- ; ; Value Range tports 8 ; 2..8 Number of the Terminal-Screens (1 Port for UI/Monitor) buffer 40 ;40..400 Total Quantity of the AX.25-Buffer Store in Frames mbuffer 10 ; 2..50 Size of the Monitor-Buffer, times 330 Bytes rbuffer 10 ; 4..20 Buffered Data per RX-Port, times 330 Bytes tbuffer 8 ; 2..14 Buffered Data per TX-Port, times 330 Bytes ; ; Selection of the Serial Port ; ---------------------------- ; rs232 1 ; 0..2 Number of the Port (COM 1 oder COM 2) ; ; Video-Setup ; ----------- ; d1lines 10 ; 2..20 Number of Lines in the TX Window d2lines 30 ; 4..23 Beginning of the Monitor Window in Lines vadapter 0 ; 0..3 Video-Typ: 0=Automatic 1=Mono, 2=Color, 3=LCD ; Laptops with or Monochrome VGA set to VA 3 ! vcolumns 80 ;40..132 Aperture of the Video-Output. Norm 80, as per V-Card vlines 25 ;25..75 Lines of Video-Output only required with VA 2 and 3 saveports 5 ; 0..8 Number of Ports, whose Screens will be saved wwrap 80 ;40..100 Position of the automatic Line Feed, normally 80 insmode on ; on/off Default Setting: Insert or Overwrite at the Cursor dosclear off; on/off DOS-Screen Clear (on) or re-instate (off) mheader on ; on/off Line Feed between Monitor-Address and Info field german on ; on/off German Char. Set with DIN-Umlauts (other IBM) remote on ; on/off Remote Control allowed to other Station using //Command command on ; on/off Colon after each Command automatically in the next Line echo off; on/off Display of the TX window also in the RX-Window log on ; on/off Logbook-Funcion. The File is called SCC.LOG exitlog off; on/off Log made up at the end of the Program (For Disk operation ; if quite running is required) knax on ; on/off Knaxen in the Loudspeaker with the arrival of Data cbell on ; on/off Piepsen with Connect/Disconnect/CTRL-G ; The REMOTE-Commands set here. Only these are Remote Controllable rcmd cstatus info mheard quit users version ;write wprg ; ;write 1 port1.scc ; Files, which will be automatically opened from the ;write 2 port2.scc ; the Start. Are able to be installed for each Port. ;write 3 port3.scc ; If this function is required, then remove the colon ;write 4 port4.scc ; that is before each Command! ; ; Installation of the Call Signs ; ------------------------------ ; dcall JA3KPA-14 ; Digipeatercall (Similar to MYCALL but different SSID) connect test ; unproto-End call ('quasi connect' on Port 0) mycall JA3KPA JA3KPA-1 JA3KPA-2 JA3KPA-5 ; up to 4 MYCALLS cnot nocall tnc2c pk232 ; Connect ignore Calls ; ; Installation of diverse Texts ; ----------------------------- ; ; Connecttext ctext BayCom - Terminal V1.40 - Modem on the RS232 ; ; Quittext (will be sent at the end of a Connection with :q or //q) qtext Thanks for the call 73 De nobASAI JA3KPA/1 ; ;qtext Eye Eye that's yer lot ! ;Or what ever takes your fancy in ONE LINE ; answer off ; Greetings text output from the Diskn (File CALL.CTX) ; ; Layer-2 Parameter, valid for all Channels the same. ; --------------------------------------------------- ; monitor 0123456789 ; List of Channels, which will be displayed on the Monitor mselect 0 ; Monitor 1=QSO 2=MFROM 3=MTO +10=NOT mcalls JM1ZKC-1 ; Monitor-Select Call Signs ; frack 30 ; 10..200 FRACK-Timer Start Value in 100ms-Units (Timer 1) resptime 2 ; 1..10 RESPONSE-Timer in 100ms-Units (Timer 2) linktime 30 ; 6..120 Inactive-Link-Timer in 10sec-Units (Timer 3) paclen 256 ; 1..256 Max. Frame length, Value Range 1..256 retry 20 ; 1..100 No. of Retries, with SABM RETRY/2 Digis and Data *1 ipoll 80 ; 1..100 maximum Info field length for IPOLL tinfo 4 ; 1..100 Infotimer, in 100ms-Units (Time to the Sending) tquit 30 ; 1..60 Quittimer, Time to Disc if Data remains, 10sec. disctime 120 ; 0..600 Time to Disconnect on an inactive Port (10 sec Units ; dwait 15 ; Channel Free Wait, in 10ms-Units. Contingency 0..DW) txdelay 22 ; Delay after Send-Switch (PTT) 10ms-Units maxframe 3 ; Outstanding Frames, Value Range 1..7 beacon 0 ; Beacon Time in 1s-Units (0 means Beacon Off) badress end JA3KPA JM1ZKC-1 ; Address for Beacon btext test ; Beacon text hbaud 1200 ; Baudrate on this Channel ; ; ; Installation of the Screen Colours. ; ----------------------------------- ; ; The Background and Foreground colours must be given in the Hexadecimal ; Format. ; cselect 0 ; Attribute for Monochrome-Video (MDA, Hercules, Laptop LCD) ; sattrib 0 07 ; TX Window sattrib 1 70 ; upper Status Line (between RX- und TX-Windows) sattrib 2 f0 ; STOP-Indicator in upper Status Line sattrib 3 07 ; RX Window sattrib 4 70 ; lower Status Line: Indicator of Conn-Call Signs+Port-Number sattrib 5 70 ; lower Status Line: not selected, no Connect sattrib 6 0f ; lower Status Line: Port selected sattrib 7 07 ; Monitor: Address field sattrib 8 0f ; Monitor: Info field sattrib 9 70 ; Text of the Help-Window sattrib 10 07 ; Marked place in the Help-Window sattrib 11 8f ; Selected place in the Help-Window sattrib 12 70 ; Control-Char (must not be the same as zu 0,3,7,8 !) ; cselect 13 ; Attribute fo Colour-Output EGA,VGA) ; sattrib 0 02 ; TX Window sattrib 1 47 ; upper Status Line (between RX- und TX-Windows) sattrib 2 c7 ; STOP-Indicator in upper Status Line sattrib 3 07 ; RX Window sattrib 4 47 ; lower Status Line: Indiacator of Conn-Call Signs+Port-Number sattrib 5 40 ; lower Status Line: not selected, no Connect sattrib 6 57 ; lower Status Line: Port selected sattrib 7 03 ; Monitor: Address field sattrib 8 02 ; Monitor: Infofiield sattrib 9 17 ; Text of the Help-Window sattrib 10 1e ; Marked places in the Help-Window sattrib 11 5e ; selected places in the Help-Window sattrib 12 04 ; Control-Char. (must not be the same as 0,3,7,8 !) ; ; ^ Foreground (Print) ; ^ Background ; ; Numbers of the Colour Attribute: ; 0 = Black 8 = Dark Grey ; 1 = Blue 9 = Light Blue ; 2 = Green A = Light Green ; 3 = Cyan turquoise) B = Light-Cyan ; 4 = Red C = Light Red ; 5 = Magenta (violet) D = Light-Magenta ; 6 = Brown E = Yellow ; 7 = White F = Light White ; ; ^ these Attributes employed for forerground- ; colours. As background they cause one of ; the Colours 0..7 with Flash. ; ;