<html><head><meta name="color-scheme" content="light dark"></head><body><pre style="word-wrap: break-word; white-space: pre-wrap;">% \iffalse
%
% collref.dtx Copyright (C) 2003-2018 Niklas Beisert
%
% This work may be distributed and/or modified under the
% conditions of the LaTeX Project Public License, either version 1.3
% of this license or (at your option) any later version.
% The latest version of this license is in
%   http://www.latex-project.org/lppl.txt
% and version 1.3 or later is part of all distributions of LaTeX
% version 2005/12/01 or later.
%
% This work has the LPPL maintenance status `maintained'.
%
% The Current Maintainer of this work is Niklas Beisert.
%
% This work consists of the files collref.dtx and collref.ins
% and the derived files collref.sty and collsamp.tex
%
%&lt;package|sample&gt;\NeedsTeXFormat{LaTeX2e}[1996/12/01]
%&lt;package&gt;\ProvidesPackage{collref}[2018/01/17 v2.0c Collect References]
%&lt;sample&gt;\ProvidesFile{collsamp.tex}[2018/01/17 v2.0c Sample for Collect References]
%&lt;*driver&gt;
%\ProvidesFile{collref.drv}[2018/01/17 v2.0c Collect References Manual file]
\PassOptionsToClass{10pt,a4paper}{article}
\documentclass{ltxdoc}

\usepackage[margin=35mm]{geometry}
\usepackage{hyperref}
\usepackage{hyperxmp}

\hypersetup{colorlinks=true}
\hypersetup{pdfstartview=FitH}
\hypersetup{pdfpagemode=UseNone}
\hypersetup{pdfsource={}}
\hypersetup{pdflang={en-UK}}
\hypersetup{pdfcopyright={Copyright 2003-2018 Niklas Beisert.
  This work may be distributed and/or modified under the
  conditions of the LaTeX Project Public License, either version 1.3
  of this license or (at your option) any later version.}}
\hypersetup{pdflicenseurl={http://www.latex-project.org/lppl.txt}}
\hypersetup{pdfcontactaddress={ETH Zurich, ITP, HIT K, Wolfgang-Pauli-Strasse 27}}
\hypersetup{pdfcontactpostcode={8093}}
\hypersetup{pdfcontactcity={Zurich}}
\hypersetup{pdfcontactcountry={Switzerland}}
\hypersetup{pdfcontactemail={nbeisert@itp.phys.ethz.ch}}
\hypersetup{pdfcontacturl={http://people.phys.ethz.ch/\xmptilde nbeisert/}}

\newenvironment{thebib}
{\list{[\theenumi]}{\parsep0pt\usecounter{enumi}}}
{\endlist}

\begin{document}

\title{The \textsf{collref} Package\thanks{%
Earlier versions developed at: Max-Planck-Institut f\"ur Gravitationsphysik
(Albert-Einstein-Institut), Potsdam, Germany;
\texttt{AEI-2009-054}}}
\hypersetup{pdftitle={The collref Package}}
\author{Niklas Beisert\\[2ex]
  Institut f\"ur Theoretische Physik\\
  Eidgen\"ossische Technische Hochschule Z\"urich\\
  Wolfgang-Pauli-Strasse 27, 8093 Z\"urich, Switzerland\\[1ex]
  \href{mailto:nbeisert@itp.phys.ethz.ch}
  {\texttt{nbeisert@itp.phys.ethz.ch}}}
\hypersetup{pdfauthor={Niklas Beisert}}
\hypersetup{pdfsubject={Manual for the LaTeX2e Package collref}}
\date{17 January 2018, \textsf{v2.0c}}
\maketitle

\begin{abstract}\noindent
\textsf{collref} is a \LaTeXe{} package to automatically collect
multiple |\bibitem| references which always appear in the same sequence
in |\cite| into a single |\bibitem| block.
\end{abstract}

\tableofcontents

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\section{Introduction}

Suppose a manuscript uses the following set of four references:
%
\begin{thebib}
\item Reference A
\item Reference B
\item Reference C
\item Reference D
\end{thebib}
%
Now if references B and C cover similar or related material,
they might always be cited together as in ``[\ldots, 2, 3, \ldots]''
throughout the manuscript.
In some (physics) journals it is then customary to collect the two
references into a single reference
%
\begin{thebib}
\item Reference A
\item Reference B
\par Reference C
\item Reference D
\end{thebib}
%
and cite it by ``[\ldots, 2, \ldots]''.
The package \textsf{collref} automates this process
by analysing the |\cite| commands
and identifying blocks of references
which always appear in conjunction.
These blocks are collapsed to a single item
in the bibliography.
Please note that \textsf{collref} requires the sequence
of |\bibitem| entries to match with
the sequence of |\cite| blocks.
This is most easily achieved through the use of \BibTeX{}
with any \emph{unsorted} style.


%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\section{Usage}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\paragraph{Inclusion.}

To use \textsf{collref} simply add the command
\begin{center}|\usepackage{collref}|\end{center}
to the preamble of your \LaTeX{} document.
No further interaction is required.

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\paragraph{Punctuation.}

\textsf{collref} provide basic punctuation between collected references.
This is specified through the package options
|\usepackage[|\textit{opt}|]{collref}|
where \textit{opt} is one of the following
\par\vspace{2ex}\noindent%
\begin{minipage}[t]{0.24\linewidth}
\centerline{\texttt{nosep} (default)}\par\vspace{1ex}
no separator:
\begin{thebib}
\item A
\item B C
\item D
\end{thebib}
\end{minipage}%
\begin{minipage}[t]{0.24\linewidth}
\centerline{\texttt{parsep}}\par\vspace{1ex}
separated by |\par|:
\begin{thebib}
\item A
\item B
\par C
\item D
\end{thebib}
\end{minipage}%
\begin{minipage}[t]{0.24\linewidth}
\centerline{\texttt{bulletsep}}\par\vspace{1ex}
separated by `\textbullet':
\begin{thebib}
\item A
\item B \textbullet{} C
\item D
\end{thebib}
\end{minipage}%
\begin{minipage}[t]{0.28\linewidth}
\centerline{\texttt{punctsep}}\par\vspace{1ex}
punctuated by `;' and '.':
\begin{thebib}
\item A .
\item B ; C .
\item D .
\end{thebib}
cf.\ note on spacing below.
\end{minipage}%
\par\vspace{2ex}\noindent
%
Alternative separators can be specified in the preamble through the
command:
\begin{center}
|\collectsep[|\textit{punctuation}|]{|\textit{separator}|}|
\end{center}
The \textit{separator} appears between references in a block and
the \textit{punctuation} at the end of a block of references.

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\paragraph{Bibliography Preparation.}

Please note that only such blocks of references can be collapsed
which appear in the same order for
|\cite| commands as for |thebibliography|.
It is recommended to prepare the bibliography through \BibTeX{}
which does this automatically.
You must use a style which does not sort the references
but preserves the order in which they were |\cite|'d,
e.g.\ \texttt{unsrt.bst}.

Also note that \textsf{collref} suppresses
new paragraphs invoked by empty lines in the bibliography.
This allows to use standard \BibTeX{} styles
which commonly separate reference entries by empty lines.
If these empty lines would be expanded to new paragraphs,
\textsf{collref} would not be able to join two references properly.
Therefore new paragraphs have to be invoked by the
command |\par|.

If you wish to use the style \texttt{punctsep}, please
refer to the following note on spacing and punctuation.

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\paragraph{Spacing and Punctuation.}

References are usually punctuated in some way.
Three of the predefined styles --
\texttt{nosep}, \texttt{parsep} and \texttt{bulletsep} --
preserve the punctuation from the bibliography.

The fourth predefined style -- \texttt{punctsep} --
automatically performs the punctuation.
This however requires care in the preparation
of the bibliography:
The entries have to be provided \emph{without} punctuation.
Furthermore, there must not be \emph{whitespaces} at the
end of an entry.
They can be suppressed with `|%|'
or |\ignorespaces|
directly following the last word of the entry.
See Appendix \ref{sec:sample} for an example.
The standard \BibTeX{} styles, e.g.\ \texttt{unsrt.bst},
have to be adjusted to remove the punctuation and whitespaces.

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\paragraph{Control.}


The package \textsf{collref} provides one command to control
which references (not) to collect:
%
\begin{center}
|\nocollect{|\textit{label}|}|
\end{center}
%
It ensures that the label \textit{label} starts
a new block of references.
It is not collapsed with earlier references.
Later references, however, can still be collapsed
to the end of \textit{label}.

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\paragraph{Labels for Blocks of References.}

While \textsf{collref} aims to automatically
collect similar references into a single block, it is often
convenient for the author to refer to such blocks
with a single citation label.
Standard \TeX/\LaTeX{} commands can be used to define such a block:
\begin{center}
|\newcommand{|\textit{$\backslash$blocklabel}|}{|\textit{label1, label2, \ldots}|}|
\end{center}
Subsequently this block can be referenced with
|\cite{|\textit{\ldots, $\backslash$blocklabel, \ldots}|}|.


%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\section{Information}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\subsection{Copyright}

\begingroup
\parskip1ex
\parindent0pt

Copyright \copyright{} 2003--2018 Niklas Beisert

This work may be distributed and/or modified under the
conditions of the \LaTeX{} Project Public License, either version 1.3
of this license or (at your option) any later version.
The latest version of this license is in
  \url{http://www.latex-project.org/lppl.txt}
and version 1.3 or later is part of all distributions of \LaTeX{}
version 2005/12/01 or later.

This work has the LPPL maintenance status `maintained'.

The Current Maintainer of this work is Niklas Beisert.

This work consists of the files |README.txt|, |collref.ins| and |collref.dtx|
as well as the derived files |collref.sty|, |collsamp.tex| and |collref.pdf|.

\endgroup

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\subsection{Files and Installation}

The package consists of the files
%
\begin{center}
\begin{tabular}{ll}
    |README.txt|  &amp; readme file \\
    |collref.ins| &amp; installation file \\
    |collref.dtx| &amp; source file \\
    |collref.sty| &amp; package file \\
    |collsamp.tex|&amp; sample file \\
    |collref.pdf| &amp; manual
\end{tabular}
\end{center}
%
The distribution consists of the files
|README.txt|, |collref.ins| and |collref.dtx|.
%
\begin{itemize}
\item
Run (pdf)\LaTeX{} on |collref.dtx|
to compile the manual |collref.pdf| (this file).
\item
Run \LaTeX{} on |collref.ins| to create the package |collref.sty|
and the sample |collsamp.tex|.
Copy the file |collref.sty| to an appropriate directory of your \LaTeX{}
distribution, e.g.\ \textit{texmf-root}|/tex/latex/collref|.
Alternatively, you may copy |collref.sty| to the local directories of
manuscripts for which you wish to use \textsf{collref}.
\end{itemize}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\subsection{Related CTAN Packages}

The objective and some of the implementation
of the \textsf{collref} package is similar to the CTAN packages
\href{http://www.ctan.org/pkg/mcite}
{\textsf{mcite}} by Thorsten Ohl
and \href{http://www.ctan.org/pkg/mciteplus}
{\textsf{mciteplus}} by Michael Shell,
but the functionality is different is several respects:
%
\begin{itemize}
\item
\textsf{collref} is intended to work transparently:
\LaTeX{} documents which compile with \textsf{collref}
should also compile fine without invoking \textsf{collref}
(obviously without collected references).
The package decides automatically which references
can be collapsed,
no further interaction of the author is required.

\textsf{mcite} and \textsf{mciteplus} leave the
decision/duty to collapse certain references
using the modified syntax |\cite{A,*B,*C}|.

\item
\textsf{mcite} and \textsf{mciteplus} are intended to handle punctuations
in collapsed references correctly.
This requires a specialised \BibTeX{} style.

No effort is made in \textsf{collref} in this regard.
Some minor modification in \texttt{collref.sty}
together with a modified \BibTeX{} style
might achieve basic punctuation features similar to \textsf{mcite}.
\end{itemize}
%
The package \textsf{collref} has been tested with other
CTAN packages concerned with citations and the bibliography:
%
\begin{itemize}
\item
\textsf{collref} works in conjunction with
\href{http://www.ctan.org/pkg/cite}{\textsf{cite}}.
Note that you must load \textsf{cite} \emph{before} \textsf{collref}
so that the latter can pass the correctly reduced list of
references down to \textsf{cite}.
Tested with v5.1 and v5.3 (2010/09/10).

\item
\textsf{collref} works in conjunction with
\href{http://www.ctan.org/pkg/hyperref}{\textsf{hyperref}}.
The two packages can be loaded in any sequence.
Tested with v6.78s and v6.83m (2012/11/06).

\end{itemize}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%\subsection{Feature Suggestions}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\subsection{Revision History}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\paragraph{v2.0c:} 2018/01/17

\begin{itemize}
\item
manual rearranged
\end{itemize}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\paragraph{v2.0b:} 2014/08/31

\begin{itemize}
\item
updated author addresses
\item
minor internal changes
\end{itemize}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\paragraph{v2.0:} 2009/09/07

\begin{itemize}
\item
proper punctuation added
(thanks to Oleg Zhirov for suggestion)
\item
blocks of references enabled
(thanks to Oleg Zhirov for suggestion)
\item
manual extended
\end{itemize}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\paragraph{v1.0:} 2009/06/09

\begin{itemize}
\item
streamlined detection of chains
\item
manual and installation package added
\item
renamed package to \textsf{collref} due to name clash on CTAN
\item
first version published on CTAN
\end{itemize}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\paragraph{v0.9:}

\begin{itemize}
\item
package named \textsf{collect}; unpublished
\end{itemize}


%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\appendix

\settowidth\MacroIndent{\rmfamily\scriptsize 000\ }
\parskip1ex
\parindent0pt

 \DocInput{collref.dtx}

\end{document}
%&lt;/driver&gt;
% \fi
%
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \section{Sample File}\label{sec:sample}
%\iffalse
%&lt;*sample&gt;
%\fi
%
% In this section we provide a sample file.
%
%    \begin{macrocode}
\documentclass{article}

%%\usepackage{cite}
\usepackage[punctsep]{collref}
%%\usepackage{hyperref}

\begin{document}

\def\tworef{c8,c9}

\cite{c1,c2,c3,c4}
\nocollect{c3}
\cite{c5,c6,c7,\tworef}
\cite{c5,c6,c7}
\cite{c7,\tworef}

\begin{thebibliography}{11}
\bibitem{c1} reference 1%
\bibitem{c2} reference 2%
\bibitem{c3} reference 3%
\bibitem{c4} reference 4%
\bibitem{c5} reference 5
\bibitem{c6} reference 6
\bibitem{c7} reference 7 %
\bibitem{c8} reference 8\ignorespaces
\bibitem{c9} reference 9\ignorespaces
\end{thebibliography}

\end{document}
%    \end{macrocode}
%\iffalse
%&lt;/sample&gt;
%\fi
% It produces the output:
% \vspace{2ex}
%
% [1, 2]  [3, 4, 5] [3, 4] [4, 5]
%
% \begin{thebib}
% \item reference 1; reference 2.
% \item reference 3; reference 4.
% \item reference 5 ; reference 6 .
% \item reference 7 .
% \item reference 8; reference 9.
% \end{thebib}
% Note the different behaviour for references 5, 6 and 7
% for which trailing whitespaces were not removed.
%
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \section{Implementation}
%\iffalse
%&lt;*package&gt;
%\fi
%
% In this section we describe the package |collref.sty|.

% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \paragraph{Internal Lists.}
%
% For each bibliography label \textit{label} the package
% maintains a predecessor |\nc@p@|\textit{label}
% and a successor |\nc@s@|\textit{label}.
% These are initially undefined.
% When a label \textit{label} is first cited these labels
% are set to the \textit{predecessor} and \textit{successor} labels, respectively,
% in |\cite{|\textit{\ldots, predecessor, label, successor, \ldots}|}|.
% An empty |\nc@p@|\textit{label} or |\nc@s@|\textit{label}
% refers to the beginning and end of a block, respectively.
% Whenever |\cite| finds conflicting blocks
% (non-matching predecessors or successors in two |\cite|'s),
% it terminates the blocks to the maximum common overlap.
%
%
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \paragraph{Interface.}
%
% The package provides two public commands, described above:
%    \begin{macrocode}
\newcommand{\collectsep}[2][]{\def\nc@punct{#1}\def\nc@sep{#2}}
\newcommand{\nocollect}[1]{\nc@breakbefore{#1}\ignorespaces}
%    \end{macrocode}

% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \paragraph{Package Options.}
%
% The package provides four predefined separators described above:
%    \begin{macrocode}
\DeclareOption{nosep}{\collectsep{}}
\DeclareOption{parsep}{\collectsep{\par}}
\DeclareOption{bulletsep}{\collectsep{\textbullet{} }}
\DeclareOption{punctsep}{\collectsep[.]{; }}
\ExecuteOptions{nosep}
\ProcessOptions
%    \end{macrocode}

% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \paragraph{Internal Commands.}
%
% Some internal commands for abbreviation:
%    \begin{macrocode}
\newcommand{\nc@getcsname}[1]{\csname #1\endcsname}
\newcommand{\nc@setcsname}[2]{\expandafter\xdef\csname #1\endcsname{#2}}
%    \end{macrocode}
% Command to terminate the chain before a label:
% The predecessor of the label is terminated.
% If the predecessor was active, its successor is also terminated.
%    \begin{macrocode}
\newcommand{\nc@breakbefore}[1]{%
  \edef\nc@citepred{\@ifundefined{nc@p@#1}{}{\nc@getcsname{nc@p@#1}}}%
  \ifx\nc@citepred\@empty\else\nc@setcsname{nc@s@\nc@citepred}{}\fi%
  \nc@setcsname{nc@p@#1}{}%
}
%    \end{macrocode}
% Command to terminate the chain after a label. Similar to the above command.
%    \begin{macrocode}
\newcommand{\nc@breakafter}[1]{%
  \edef\nc@citesucc{\@ifundefined{nc@s@#1}{}{\nc@getcsname{nc@s@#1}}}%
  \ifx\nc@citesucc\@empty\else\nc@setcsname{nc@p@\nc@citesucc}{}\fi%
  \nc@setcsname{nc@s@#1}{}%
}
%    \end{macrocode}

% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \paragraph{Citations.}
%
% Hack for |\@citex|:
% It is assumed that (as in \LaTeXe) |\cite| eventually
% passes down to |\@citex|.
%    \begin{macrocode}
\let\nc@old@citex\@citex

\def\@citex[#1]#2{%
  \let\nc@citecomma\@empty%
  \let\nc@citestring\@empty%
  \let\nc@citelast\@empty%
  \edef\nc@citelist{#2}%
%    \end{macrocode}
% Main loop to process the arguments of |\cite|.
% The current label is stored in |\nc@citethis|.
%    \begin{macrocode}
  \@for\nc@citethis:={\nc@citelist}\do{%
    \edef\nc@citethis{\expandafter\@firstofone\nc@citethis\@empty}%
%    \end{macrocode}
% The first entry has no predecessor, terminate the chain.
%    \begin{macrocode}
    \ifx\nc@citelast\@empty%
      \nc@breakbefore{\nc@citethis}%
    \else%
%    \end{macrocode}
% Non-first entry: Fill undefined successor and predecessors entries
% with the current chain sequence.
%    \begin{macrocode}
      \@ifundefined{nc@s@\nc@citelast}%
                   {\nc@setcsname{nc@s@\nc@citelast}{\nc@citethis}}{}%
      \@ifundefined{nc@p@\nc@citethis}%
                   {\nc@setcsname{nc@p@\nc@citethis}{\nc@citelast}}{}%
%    \end{macrocode}
% Get the successor and predecessors for the last and current entry, respectively.
%    \begin{macrocode}
      \edef\nc@citesucc{\nc@getcsname{nc@s@\nc@citelast}}%
      \edef\nc@citepred{\nc@getcsname{nc@p@\nc@citethis}}%
%    \end{macrocode}
% In case of mismatching chains: terminate all links.
%    \begin{macrocode}
      \ifx\nc@citesucc\nc@citethis%
        \ifx\nc@citepred\nc@citelast%
        \else%
          \nc@breakafter{\nc@citelast}%
          \nc@breakbefore{\nc@citethis}%
        \fi%
      \else%
        \nc@breakafter{\nc@citelast}%
        \nc@breakbefore{\nc@citethis}%
      \fi%
    \fi%
%    \end{macrocode}
% Get content of |\b@|\textit{label} entry to find out
% whether the |\bibitem{label}| entry exists.
% We need to take special care of extended label definitions in \textsf{hyperref}.
%    \begin{macrocode}
    {\def\hyper@@link[##1]##2##3##4{##4}%
      \xdef\nc@citelabel{\nc@getcsname{b@\nc@citethis}}}%
%    \end{macrocode}
% Only add those labels which actually exist to the pass-on string.
% This removes collaped references from the citation marks.
%    \begin{macrocode}
    \ifx\nc@citelabel\@empty\else%
      \edef\nc@citestring{\nc@citestring\nc@citecomma\nc@citethis}%
    \fi%
%    \end{macrocode}
% Write |\citation| tag to .aux file in original order.
% Some duplicate |\citation|'s will be written by
% the original |\citex| code, but these will have no impact.
%    \begin{macrocode}
    \if@filesw\immediate\write\@auxout{\string\citation{\nc@citethis}}\fi%
%    \end{macrocode}
% Continue to next label.
%    \begin{macrocode}
    \edef\nc@citelast{\nc@citethis}%
    \def\nc@citecomma{,}%
  }%
%    \end{macrocode}
% The last entry has no successor, terminate the chain.
%    \begin{macrocode}
  \nc@breakafter{\nc@citelast}%
%    \end{macrocode}
% Pass on to original \LaTeX{} code.
%    \begin{macrocode}
  \nc@old@citex[#1]{\nc@citestring}%
}
%    \end{macrocode}

% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \paragraph{Bibliography.}
%
% Enhance the |thebibliography| environment to
% a) set the |\nc@biblast| label to something,
%    and empty |\nc@nextpunct|
%    (no predecessor for the first entry),
% b) convert linebreaks into whitespaces (avoid implicit |\par|'s), and
% c) put the final punctuation for the last entry.
%
%    \begin{macrocode}
\let\nc@old@thebibliography\thebibliography
\let\nc@old@endthebibliography\endthebibliography

\def\thebibliography{%
  \xdef\nc@biblast{asldjfhasklfh}%
  \xdef\nc@nextpunct{}%
  \catcode`\^^M=10%
\nc@old@thebibliography}

\def\endthebibliography{%
  \nc@nextpunct%
\nc@old@endthebibliography}
%    \end{macrocode}

% Overwrite |\bibitem|:
% It is assumed that the native \LaTeXe{} code
% is equivalent but with the \LaTeX{}
% internals |\@lbibitem| and |\@bibitem|.
% Some other packages may also redefine |\bibitem|
% and this will inevitable cause compatibility issues.
% This implementation is safe with current versions of \textsf{hyperref}.
%    \begin{macrocode}
\def\bibitem{\@ifnextchar[\nc@lbibitem\nc@bibitem}
%    \end{macrocode}
%
% |\nc@noitem| is invoked in place of the original |\@bibitem| or |\@lbibitem|
% for collapsed references:
%    \begin{macrocode}
\def\nc@noitem#1{%
  \if@filesw\immediate\write\@auxout{\string\bibcite{#1}{}}\fi%
\ignorespaces}
%    \end{macrocode}

% The hack for |\@bibitem|: It checks whether
% this reference is part of a block.
% If so, put separator and collect by |\nc@noitem|.
% Otherwise put punctuation and pass down to |\@bibitem|.
% Finally let |\nc@biblast| point to current item,
% and fill the punctuation |\nc@nextpunct| for the next entry.
%    \begin{macrocode}
\def\nc@bibitem#1{%
  \edef\nc@bibpred{\@ifundefined{nc@p@#1}{}{\nc@getcsname{nc@p@#1}}}%
  \ifx\nc@biblast\nc@bibpred\nc@sep\nc@noitem{#1}%
    \else\nc@nextpunct\@bibitem{#1}\fi%
  \xdef\nc@biblast{#1}%
  \xdef\nc@nextpunct{\nc@punct}%
\ignorespaces}
%    \end{macrocode}

% Similar hack for |@lbibitem|:
%    \begin{macrocode}
\def\nc@lbibitem[#1]#2{%
  \edef\nc@bibpred{\@ifundefined{nc@p@#2}{}{\nc@getcsname{nc@p@#2}}}%
  \ifx\nc@biblast\nc@bibpred\nc@sep\nc@noitem{#2}%
    \else\nc@nextpunct\@lbibitem[#1]{#2}\fi%
  \xdef\nc@biblast{#2}%
  \xdef\nc@nextpunct{\nc@punct}%
\ignorespaces}
%    \end{macrocode}

%\iffalse
%&lt;/package&gt;
%\fi
%
\endinput
</pre></body></html>