%
% examplep.sty -- typesetting verbatim TeX code and examples
% by pts@fazekas.hu at Sat Sep 27 23:58:14 CEST 2003
% -- Sun Sep 28 23:38:37 CEST 2003
% ligatures broken -- Tue Sep 30 19:14:11 CEST 2003
% examplep.sty at Fri Oct 24 10:25:27 CEST 2003
% options and misc stuff at Fri Oct 24 22:23:06 CEST 2003
% xalign=, yalign= fixes, *-test.tex at Wed Dec 24 02:33:24 CET 2003
% baseline-grid=, fixes at Wed Feb 25 23:37:41 CET 2004
%
% This is a LaTeX package that provides following features:
%
% -- a robust \PVerb macro comparable to the LaTeX \verb macro
% -- \begin{PSource} comparable to the LaTeX \begin{verbatim} environment
% -- \begin{WSource} comparable to \begin{verbwrite} in sverb.sty
% and \begin{filecontents} of latex.ltx
% -- \begin{PWSource} combining \begin{PSource} and \begin{WSource}
% -- \begin{PexaMiniPage} comparable to the LaTeX \begin{minipage} environment
% -- \PexaShowBoth that typesets LaTeX code, and also shows it verbatim;
% facing and page breaks enabled (!)
% -- Package load options can be specified \usepacakge[...]{examplep}
%
% See samplewidth= in this file for the load option defaults. Use
% \PexaDefaults{...} instead of \usepackage[...]{examplep} to specify
% complicated options such as linenumberformat={...} (this is a LaTeX kernel
% limitation.)
%
% !! func-tion better hyphenation point in \Q than functi-on
% !! after \end{PSource} in pts_diploma.tex, don't require \noindent
% !! option to emit tabs as spaces
% !! allow wider Source if Sample is small enough
% !! \ifnum0=`{\fi} and similar tricks for \halign?
% !! magyarldf-doc.tex infinite bug
% !! why is it called twice?
% \def\pexa@cverb@@verbatimfont{u\normalfont\ttfamily
% \hyphenpenalty10000 }
% !! why doesn't \selectlanguage works inside \begin{PSource}[srcstyle=leftboth]
% !! \PVerb{foo} mustn't insert $\lnot$ if foo is at EOL
% !! \ifvmode testing for \PSource
% !! \PVerb{...} inner unnested braces (\futurelet?)
% !! \penalty in \PVerb
% !! \pexa@ss@left etc. should work with \PexaShowBoth (not for measuring)
% !! \@afterindenttrue etc.
% !! ASCII tab (9) characters aren't supported properly
% !! \begin{PSource} says 'Missing $ inserted.' in magyarldf-doc.tex:
% \begin{PSource}[srcstyle=leftboth]
% \grq~\glq~\glqq~\grqq~\flq~\frq~\flqq~\frqq\\
% \textquoteright~\textquotedblright\\
% \textquoteleft~\textquotedblleft\\
% \end{PSource}
% Dat: multiple spaces count inside \PVerb+...+, even at line break
% Dat: it is impossible to indent the first line via \begin{WSource} etc.,
% because verbfwr.sty chops heading spaces
% Dat: 5000..9999 lines of \halign containing only `(9999)\hfil\cr' will fill
% up TeX's memory (! TeX capacity exceeded, sorry [main memory size=263001].),
% so text fed to \PexaShowBoth shouldn't exceed 375 lines (with an
% average line length of 80 characters)
% Imp: page breaks near \FBHLastDepth put a too tall \vrule on next page
%
\NeedsTeXFormat{LaTeX2e}
\ProvidesPackage{examplep}[2010/02/03 v0.04 Verbatim and typeset TeX code]
\@ifundefined{XeTeXinputencoding}{}{\XeTeXinputencoding "cp1250" }
\edef\pexa@@restorecat{\catcode\string``\the\catcode\string``\space}
\catcode\string``12 % may have been changed by Babel
\RequirePackage{verbfwr}
% ---
\def\pexa@@samplename{pexa-sam.tex}
\def\pexa@@sourcename{pexa-src.tex}
\let\pexa@@cursourcename\pexa@@samplename
\def\pexa@dohex#1{%
\if\noexpand#1^%
\expandafter\pexa@dohex@lowa
\else\char"5E \expandafter#1\fi
}
\def\pexa@dohex@lowa#1#2{%
\if\noexpand#18\pexa@swaprelax{\pexa@dohex@lowc#28}%
\else\if\noexpand#19\pexa@swaprelax{\pexa@dohex@lowc#29}%
\else\if\noexpand#1a\pexa@swaprelax{\pexa@dohex@lowc#2A}%
\else\if\noexpand#1b\pexa@swaprelax{\pexa@dohex@lowc#2B}%
\else\if\noexpand#1c\pexa@swaprelax{\pexa@dohex@lowc#2C}%
\else\if\noexpand#1d\pexa@swaprelax{\pexa@dohex@lowc#2D}%
\else\if\noexpand#1e\pexa@swaprelax{\pexa@dohex@lowc#2E}%
\else\if\noexpand#1f\pexa@swaprelax{\pexa@dohex@lowc#2F}%
\else\if\noexpand#1I\pexa@swaprelax{\pexa@dohex@lowc90#2}% tab: \t; Imp: better !! no #2, neither in \char "5E
\else\char"5E \pexa@swaprelax{\pexa@dohex#1#2}%
\fi\fi\fi\fi\fi\fi\fi\fi\fi\relax
}
\def\pexa@dohex@lowb#1{%
\if\noexpand#1aA%
\else\if\noexpand#1bB%
\else\if\noexpand#1cC%
\else\if\noexpand#1dD%
\else\if\noexpand#1eE%
\else\if\noexpand#1fF%
\else#1\fi\fi\fi\fi\fi\fi
}
\def\pexa@dohex@lowc#1#2{%
\ifnum\catcode"#2\pexa@dohex@lowb#1=13{\lccode`\~="#2\pexa@dohex@lowb#1\lowercase{~}}%
\else{\lccode`\+="#2\pexa@dohex@lowb#1\lowercase{+}}\fi%
}
%** Usage: \begin{PWSource}[OPTIONS]...\end{PWSource}. Writes everything (...)
%** into file \pexa@@sourcename, and also typesets it with \PexaShowSource
%** Dat: everything after \end{PWSource} in its line will be ignored
%** Dat: ^^ab hex codes >=128 will be substituted in \input (by \pexa@dohex)
%** Dat: ^^I etc. hex codes will be left alone
%** Dat: spaces at EOL will be lost (this is a limitation of TeX's eyes), so
% will be contents of lines with spaces only. This limitation is true
% for all environments in this file.
%** Dat: if `[OPTIONS]' is missing, then all spaces
\def\PWSource{%
\let\pexa@@savepar\par
\catcode`\ =12 \let\par\relax \obeylines% ugly hack so \@ifnextchar won't gobble spaces or newlines
\@ifnextchar[\pexa@PWSource{\pexa@PWSource[]}}%]
\def\pexa@PWSource[#1]{%
\def\pexa@@envopts{#1}%
\global\let\pexa@@cursourcename\pexa@@sourcename
\immediate\openout\verbfwr@writefile\pexa@@cursourcename\relax
\let\verbfwr@writecs\verbfwr@writefile
\let\verbfwr@actwriteline\verbfwr@writeline
\let\par\pexa@@savepar % so we won't get an infinite loop
\verbfwr@default@acts
\verbfwr@readenv\verbfwr@write
% Don't put anything else here!
}
\def\endPWSource{%
\immediate\closeout\verbfwr@writefile
\expandafter\PexaShowSource\expandafter{\pexa@@envopts}% use defaults
}
%** Writes its contents to file \pexa@@samplename and sets
%** \pexa@@cursourcename to \pexa@@samplename
%** Usage: \begin{WBoth}...\end{WBoth}. `...' is LaTeX source that can
%** be typeset verbatim or later \input into the middle of the document. See
%** the docs for \begin{PWSource} for more details.
\def\WBoth{%
\global\let\pexa@@cursourcename\pexa@@samplename
\immediate\openout\verbfwr@writefile\pexa@@samplename\relax
\let\verbfwr@writecs\verbfwr@writefile
\let\verbfwr@actwriteline\verbfwr@writeline
\verbfwr@default@acts
\verbfwr@readenv\verbfwr@write% finish this \cs here
}
\def\endWBoth{\immediate\closeout\verbfwr@writefile}
%** Similar to \begin{WBoth} (see docs there), but writes its contents to
%** file \pexa@@samplename.
\def\WSample{%
\immediate\openout\verbfwr@writefile\pexa@@samplename\relax
\let\verbfwr@writecs\verbfwr@writefile
\let\verbfwr@actwriteline\verbfwr@writeline
\verbfwr@default@acts
\verbfwr@readenv\verbfwr@write% finish this \cs here
}
\let\endWSample\endWBoth
%** Similar to \begin{WBoth} (see docs there), but writes its contents to
%** file \pexa@@sourcename (and sets \pexa@@cursourcename to it).
\def\WSource{%
\global\let\pexa@@cursourcename\pexa@@sourcename
\immediate\openout\verbfwr@writefile\pexa@@sourcename\relax
\let\verbfwr@writecs\verbfwr@writefile
\let\verbfwr@actwriteline\verbfwr@writeline
\verbfwr@default@acts
\verbfwr@readenv\verbfwr@write% finish this \cs here
}
\let\endWSource\endWBoth
%** Everything is ignored between \begin{PIgnore}...\end{PIgnore}. The trailing
%** Everything in the line of \end{PIgnore} is ignored, even chars after it.
%** `...' may contain unnested braces, groups or \ifs.
\def\PIgnore{%
\verbfwr@default@acts
\let\verbfwr@actemitline\@gobble
\verbfwr@readenv\verbfwr@write% finish this \cs here
}
\let\endPIgnore\endWBoth
%** Usage: \begin{PSource}[OPTIONS]...\end{PSource}. Same as \begin{PWSource},
%** but doesn't write anything to a file, so it is a little faster. Also, a
%** little more stable, since ^^ab hex codes aren't involved.
\def\PSource{%
\catcode`\ =13 \let\par\@@par \obeylines% ugly hack so \@ifnextchar won't gobble spaces or newlines
\@ifnextchar[\pexa@PSource{\pexa@PSource[]}}%]
\def\endPSource{\pexa@@undoyindent}
%\def\verbfwr@readenv@ii#1\hfuzz{{\end.}{\end{#1}}}% !!
\def\pexa@PSource[#1]{%
\pexa@doopts{#1}%
\expandafter\expandafter\expandafter\pexa@plines@start
\expandafter\verbfwr@readenv@i\@currenvir\hfuzz%
}%
\def\pexa@plines@notverbatim{%
%\catcode`~=13 %\def~{\nobreakspace{}}%
\catcode`\ =10 % restore to be space
\let\pexa@setupverb\relax% call this before \pexa@setupverb
\let\pexa@default@verbatimfont\relax
\def\verbfwr@read##1##2##3{\verbfwr@noter@read0}%
}
\def\pexa@plines@expandeach#1{%
\expandafter\def\expandafter\reserved@a\expandafter{%
\expandafter\relax
\pexa@@eachline{#1}\cr}%
}
%** @param #1 `\end{PSource}' in catcode 12
%** @param #2 `\end {PSource}' with normal catcodes
\def\pexa@plines@start#1#2{%
\def\pexa@@starthalign{}%
\def\pexa@@dohalign{}%
%** Must be fully expandable.
\let\pexa@@eachline\@firstofone
%%\show\pexa@default@srcstyle
\expandafter\ifx\csname pexa@ss@\pexa@default@srcstyle\endcsname\relax
\def\verbfwr@actemitlineone{% not called if there are no lines!
\let\verbfwr@actemitlineone\@empty
\pexa@starthalign% one @
\pexa@@beforefirstline
\noalign\bgroup
}%
\def\verbfwr@actemitline##1{% get line in \VerbFwrLines
%\edef\reserved@a{\def\noexpand\VerbFwrLines{\noexpand\pexa@@eachline{\VerbFwrLines}}}%
%\expandafter\egroup\reserved@a% \noalign, pass \VerbFwrLines inside the column
%\relax\VerbFwrLines\cr%\relax<.\VerbFwrLines.>\cr%
% vvv This solution makes it possible for \pexa@@eachline to contain `&'
% vvv Dat: a beginning \edef\reserved@a{\relax...} is necessary to prevent
% TeX looking for \span, \omit etc.
%\edef\reserved@a{\relax\expandafter\pexa@@eachline\expandafter{\VerbFwrLines}\cr}%
\expandafter\pexa@plines@expandeach\expandafter{\VerbFwrLines}%
\expandafter\egroup\reserved@a% \noalign, pass \VerbFwrLines inside the column
%
\noalign\bgroup
}%
\def\verbfwr@actemitdone{% called if there were no lines
\ifx\verbfwr@actemitlineone\@empty
\egroup% \noalign
\egroup% \halign
\fi
}%
\expandafter\let\expandafter\pexa@plines@@setup\csname pexa@sh@\pexa@default@srcstyle\endcsname% this sets up further \catcodes
\else
%\expandafter\pexa@setup@calcwidths\expandafter{\pexa@default@usewidth}%
% Dat: no need to save/restore \parindent here, becasuse we do \noindent
\def\verbfwr@actemitlineone{\let\verbfwr@actemitlineone\@empty}%
\let\verbfwr@actemitdone\@empty
\def\verbfwr@actemitline##1{\expandafter\pexa@plines@parpre\expandafter\pexa@@eachline\expandafter{\VerbFwrLines}\@@par}%
\expandafter\let\expandafter\pexa@plines@@setup\csname pexa@ss@\pexa@default@srcstyle\endcsname% this sets up further \catcodes
\everypar{}%
% Dat: too early to set \hsize now
\let\pexa@@dopars\@empty
\fi
%
% vvv Similar to \PexaShowSourceMany
%\leavevmode% for \@bsphack
%\@bsphack% don't have to save \spacefactor
\let\par\@@par% make \vskip work fine??
\expandafter\pexa@setup@calcwidths\expandafter{\pexa@default@usewidth}%
\begingroup
\pexa@@calcwidths% calculate leftmost \tabskip
\@tempdima\PexaWidth
\advance\@tempdima\tabskip
\edef\reserved@a{\def\noexpand\pexa@@tolinewidth{to\the\@tempdima}}%
\expandafter\endgroup\reserved@a
%\advance\linewidth\@totalleftma
%\def\pexa@@tolinewidth{to\linewidth}%
%
\pexa@xyindent\pexa@default@xindent\pexa@default@yindent
% \pexa@plines@notverbatim
\pexa@plines@@setup
% ^^^ calls \pexa@s?@..., which calls \pexa@show@pars or \pexa@show@halign,
% which calls \pexa@setupverb and \pexa@@calcwidths, which modifies
% \tabskip and \linewidth
\advance\leftskip-1\leftskip% keep stretch
\advance\rightskip-1\rightskip% keep stretch
%\leftskip\z@skip \rightskip\z@skip % Dat: needed by \begin{egysoros} -- why??
%\advance\hsize\rightskip
%\showthe\hsize
%\showthe\leftskip
%\showthe\rightskip
\let\par\@@par \obeylines
\verbfwr@read{#1}\@gobble{% read verbatim data line-by-line, call \verfwr@act... as callbacks
%\@esphack
#2%
}%
% Don't put anything else here, will be read by \verbfwr@read
}
% vvv Dat: \leavevmode would insert \indent and cancels \noindent
% vvv Dat: \null is needed for empty lines with no \catcode change for ^^M
\def\pexa@plines@parpre{\pexa@@vts\noindent\null
\kern\tabskip% !! added at Tue May 18 11:14:58 CEST 2004; for \begin{PSource} in \begin{description}; does it hurt lakk??
\pexa@@everyparr}%
% --- Adding accents and breaking ligatures
\edef\pexa@quoteleft {\relax\string`}
\edef\pexa@quoteright{\relax\string'}
\edef\pexa@hyphen {\relax\string-\relax}%
\edef\pexa@comma {\relax\string,}
\edef\pexa@less {\relax\string<}
\edef\pexa@greater {\relax\string>}
\let\pexa@@oldH\H% default
\let\pexa@@olddot\.% default
\def\pexa@@otone{OT1}
\def\pexa@H#1{% \H accent missing from {OT1}{cmtt}
\ifx\f@encoding\pexa@@otone% Imp: don't hard-wire cmr??
\pexa@curprop\iftrue%
\pexa@@oldH#1%
\else%
\pexa@add@accentx{125}{\fontencoding{OT1}\fontfamily{cmr}\selectfont}#1% not expandable
\fi%
\else%
\pexa@@oldH#1% {T1}{cmtt} is OK
\fi%
}%
\def\pexa@dot#1{% \. accent missing from {OT1}{cmtt}
\ifx\f@encoding\pexa@@otone%
\pexa@curprop\iftrue%
\pexa@@dot#1%
\else%
\pexa@add@accentx{95}{\fontencoding{OT1}\fontfamily{cmr}\selectfont}#1% not expandable
\fi%
\else%
\pexa@@olddot#1% {T1}{cmtt} is OK
\fi%
}%
%** Derived from LaTeX \add@accent
%** @param #1 0..255 code of the accent
%** @param #2 commands to load the accent font
%** @param #3 char to put the accent on
\def\pexa@add@accentx#1#2#3{\hmode@bgroup
\let\hmode@start@before@group\@firstofone
\setbox\@tempboxa\hbox{%
#3\global\mathchardef\accent@spacefactor\spacefactor}%
\edef\@thefont{\the\font}%
#2% select font
\accent#1%
\@thefont#3%
\egroup\spacefactor\accent@spacefactor
}
\def\pexa@@zero{0}
%** `\pexa@curprop\iftrue' behaves like `\iftrue' if the current font is
%** proportional; or `\iffalse' if the current font is fixed-width.
%** Cannot create an `\ifpexa@curprop' macro, since it won't be treated properly
%** when skipped (only \let\ifpexa@curprop\iffalse and \let\ifpexa@curprop\iftrue
%** is treated properly).
%** Ruins \reserved@a
%** Imp: better in pexample.sty
\def\pexa@curprop#1{%
\expandafter\let\expandafter\reserved@a\csname prop@\fontname\font\endcsname
\ifnum10>1\reserved@a% no ` %' here; calculate \reserved@a for the first time
\def\reserved@a{1}% \let\reserved@a0 won't work with `\ifnum'
\ifdim\fontdimen3\font=\z@
\ifdim\fontdimen4\font=\z@
\begingroup
\setbox0=\hbox{i}%
\setbox1=\hbox{W}%
\ifdim\wd0=\wd1 %
\aftergroup\let\aftergroup\reserved@a\aftergroup\pexa@@zero% found a fixed-width font
\fi
\endgroup
\fi
\fi
\expandafter\let\csname prop@\fontname\font\endcsname\reserved@a
\fi
\csname if\if\reserved@a0false\else true\fi\endcsname
}%
% ---
%** Acts based on usewidth=
%** @in \linewidth already decreased by \@totalleftmargin and total_right margin
%** @out \PexaWidth = source+rule+sample a dimen register or tokens ending
%** by space `1.2pt '; \PexaWidth doesn't contain left or right indentation
%** @out \pexa@@calcwidths to set \tabskip to point to final left margin
%** to decrease \linewidth by some margins
%** Modifies \linewidth: decreases by \leftskip
%** @param #1 value of \pexa@default@usewidth: 0, 1 or 2
\def\pexa@setup@calcwidths#1{%
\if#12% usewidth=skipwidth
\begingroup
\@tempdimb\linewidth
% Dat: we definitely mustn't do \advance\@tempdimb-\@totalleftmargin,
% because \linewidth has never contained the value of \@totalleftmargin
\advance\@tempdimb-\rightskip \advance\@tempdimb-\leftskip
\edef\PexaWidth{\def\noexpand\PexaWidth{\the\@tempdimb\space}}%
\expandafter\endgroup\PexaWidth
% Dat: we really don't want to say \let\PexaWidth\@tempdimb here, because
% \small in \pexa@defaut@verbatimfont will clobber it later
\def\pexa@@calcwidths{%
% vvv this is called in \pexa@show@halign to set the left margin properly
\tabskip\leftskip \advance\tabskip\@totalleftmargin
%\advance\linewidth-\@totalleftmargin% BUGFIX at Tue Dec 23 19:55:06 CET 2003 -- fixes \PexaShowBoth
%\advance\linewidth-\leftskip% Dat: enabling this makes \begin{egysoros} buggy (too narrow line). BUGFIX at Tue Mar 30 17:40:50 CEST 2004
%\advance\linewidth-\rightskip% !! is this used? and below? (two)
}%
\else\if#11% usewidth=linewidth
\let\PexaWidth\linewidth
\def\pexa@@calcwidths{\tabskip\@totalleftmargin
%!!\advance\linewidth-\@totalleftmargin% BUGFIX at Tue Dec 23 19:55:06 CET 2003 -- fixes \PexaShowBoth
}%
\else% usewidth=hsize
\let\PexaWidth\hsize
\def\pexa@@calcwidths{\tabskip\z@ \let\linewidth\hsize}%
\fi\fi
}
\def\PexaShowSample#1{%
\begingroup
\pexa@doopts{#1}%
% vvv Dat: may contain .45\PexaWidth
% \expandafter\@temptokena\expandafter{\pexa@default@samplewidth}%
% !! test this
\@tempdimb\PexaWidth\relax
\let\PexaWidth\@tempdimb
\@tempdima\pexa@default@samplewidth\relax% do arithmetic: .5\PexaWidth
\edef\PexaWidth{\the\@tempdimb\space}%
\edef\reserved@a{\noexpand\PexaShowSampleMany
{\the\@tempdima}% 1
{\pexa@default@boxstyle}% 2
}%
%%\show\reserved@a
\expandafter\endgroup\reserved@a
}%
%** Shows the Sample in lines on their own. Page breaks disallowed.
%** @param #1 dimen: width of Sample (\hsize, paragraph width). Examples: .4\hsize >= .4\linewidth
%** @param #2 boxing style of Sample:
%** `h': \hbox
%** `v': \vtop
%** 'm': is minipage with \vtop
%** 'p': is PexaMinipage with \vtop (recommended)
%** `V': \vbox
%** 'M': is minipage with \vbox
%** 'P': is PexaMinipage with \vbox
%** 'G': no boxing, only \begingroup .. \endgroup
\def\PexaShowSampleMany#1#2{%
\if#2G\else
\if#2h\else
\vskip\z@skip% leave horizontal mode
\fi\fi
\csname pexa@setsample@#2\endcsname{#1}%
}
% ---
\def\pexa@@tolinewidth{to\PexaWidth}
\def\pexa@@calcwidths{}
%** Default: align left
\def\pexa@@preamble{##\hfil\tabskip\z@ plus1fill}
\def\pexa@@preamblecr{\cr}% or {\cr\noalign{\nobreak}}
%** Don't allow a page break before Sample is over
\def\pexa@preamblecr@keep{\cr\noalign{%
\ifdim-\pexa@@cnta\baselineskip<\@tempdima\nobreak\fi}}%
%** Default
\let\pexa@@beforehalign\@empty
\let\pexa@@firstlinebeg\@empty
\let\pexa@@beforefirstline\@empty
\def\pexa@default@addlinenum{0}% start line numbering from \pexa@default@addlinenum+1
\def\pexa@@cnta{0}%
\let\pexa@@cntb\pexa@default@addlinenum% default
%** Contains width of linenumbersep=, too
\def\pexa@default@linenumberwidth{0pt}%
%** Better than `~', because not affected by amsxtra.sty's redefinition.
\def\pexa@default@space{\leavevmode\nobreak\ }%
%** @example \enspace, \quad, \hbox{\space} etc.
%** @example \def\pexa@default@linenumberwidth{\parindent} \def\pexa@default@linenumbersep{\enspace}%
\def\pexa@default@linenumbersep{}%
%** No effect, will be overridden later.
\def\pexa@default@linenumberformat{}
%** Clobbers \@tempcnta. \gdef#1
%** @param #1 a macro \cs name expanding to a number
\def\pexa@decr#1{\@tempcnta#1\advance\@tempcnta\m@ne\global\edef#1{\the\@tempcnta}}
%** A tab is really more complicated than 8 spaces, but correct tabbing would
%** be hard to implement here.
\def\pexa@setuptab{%
\catcode9 13 \begingroup\lccode`~=9 \lowercase{\endgroup\def~}{\ \ \ \ \ \ \ \ }%
}
%** Called by \begin{PLines}, \PexaShowBoth, \PVerb etc.
\def\pexa@setupverb{%
\ifnum\the\catcode`^=13 % already active, is \pexa@dohex
\let\do\@makeother \dospecials
\catcode`^=13
\else
\let\do\@makeother \dospecials% \catcode`\\=12 etc. (see latex.ltx for \dospecials)
\fi
% Dat: `latex --translate-file il1-t1' emits accented glyph to file as a single char
% ^^^ Dat: don't modify catcode of 127..255, so accents will come out right
\catcode`\ =13 \lccode`~=32 \lowercase{\let~\pexa@default@space}% make each space count, but not a visible space -- \@xobeysp defined in latex.ltx
% ^^^ Dat: former \let~\@xobeysp
% Common ligatures in monospaced fonts: `` '' ,, -- -Z << >> !` ?` (where Z has ASCII code 127)
% Dat: compare this code with \@noligs of latex.ltx -- this is more efficient
% vvv Dat: this has no effect on \pexa@cverb@outerc (and neither on inner
% \PVerb), but that is hoped to have its \break{}s already separating.
\catcode``13 \lccode`~``\lowercase{\let~\pexa@quoteleft}% break Spanish ?` and !` ligatures in cmtt10.mf (and also the '' ligature in)
\catcode`-13 \lccode`~`-\lowercase{\let~\pexa@hyphen}% break ligatures --, --- and -Z (where Z has ascii code 127)
\catcode`'13 \lccode`~`'\lowercase{\let~\pexa@quoteright}% break ligature ''
\catcode`,13 \lccode`~`,\lowercase{\let~\pexa@comma}% break ligature ,,
\catcode`<13 \lccode`~`<\lowercase{\let~\pexa@less}% break ligature <<
\catcode`>13 \lccode`~`>\lowercase{\let~\pexa@greater}% break ligature >>
%
\let\pexa@@oldH\H \let\H\pexa@H%
\let\pexa@@olddot\.\let\.\pexa@dot%
}
%** Not \pexa@default@verbatimfont. This is used by load options to
%** examplep.sty
\def\pexa@@verbatimfont{\verbatim@font}% in latex.ltx
\def\pexa@setupverb@read{%
\catcode`\^13 \lccode`~`^\lowercase{\let~\pexa@dohex}% Dat: allow ^^e1 hex emulation (setting catcode=7 won't do good because of literal `^'s)
}
\def\pexa@starthalign{%
%\zzzzz\show\pexa@@tolinewidth\showthe\PexaWidth
\halign\pexa@@tolinewidth\bgroup
\pexa@@vts% run only once
\pexa@decr\pexa@@cnta
\pexa@decr\pexa@@cntb% must be \global because of \halign, but don't want to clobber \@tempcnt* \global{}ly
\span\pexa@@preamble % expand preamble right now: `##\hfil'
\cr% Dat: \pexa@@preamblecr isn't called _before_ the 1st line
}%
\def\pexa@@starthalign{\pexa@starthalign}%
\def\pexa@@dohalign{%
\pexa@@beforefirstline% called after the \cr of the preamble, should contain \noalign{...}
%\relax\pexa@setupverb@read% Dat: already called
\relax\input\pexa@@cursourcename\space
% ^^^ Dat: \relax instead of \space would begin an extra line and demand
% an extra \cr (at end)
\egroup% terminate \halign
}%
%** Call this inside \begingroup, from a macro
%** Caller may set \pexa@@beforehalign, \tabskip; should pexa@@
\def\pexa@show@halign{%
\pexa@setupverb
\pexa@setuptab
\pexa@default@verbatimfont
\let\par\pexa@@preamblecr \obeylines% must set \par before this; so each ^^M will emit a \cr plus more
\def\pexa@@vts{%
\pexa@@firstlinebeg
%\vrule height\topskip width\z@ %!! try to do without this
\global\let\pexa@@vts\relax
}%
\pexa@@calcwidths
\pexa@@beforehalign
% Dat: \everypar{...} has no effect here (inside \halign)
\pexa@@starthalign
\pexa@@dohalign
}
\def\pexa@@dopars{% doesn't called by \begin{egysoros}, called by \begin{code}
\begingroup% Dat: don't do a \vbox, because it resets \parshape
\everypar{%
\setbox0\lastbox% remove \indent since \noindent is too late
\pexa@@vts\pexa@@everyparr}%
%\showthe\linewidth
%\showthe\leftskip
\hsize\linewidth
\advance\hsize\leftskip% !! already done by \pexa@show@pars?? -- maybe fixup after hook?
\advance\hsize\rightskip
\pexa@setupverb@read
\relax\input\pexa@@cursourcename\space
\endgroup
}%
\def\pexa@show@pars{% modelled after \pexa@ss@left
\pexa@setupverb% Dat: we still have normal catcodes for \dospecials before calling this
\pexa@setuptab
%\showthe\catcode9
%\show\pexa@default@verbatimfont
\pexa@default@verbatimfont
%\show\pexa@@calcwidths
\parfillskip\@flushglue
\parskip\z@skip
%
\pexa@@calcwidths% doesn't always change \linewidth; sets \tabskip
% Dat: now \tabskip is the left indentation and \linewidth is the desired
% width of text. From that we calculate \leftskip and \hsize.
\leftskip\tabskip% as calculated by \pexa@@calcwidths
\hsize\linewidth% !! \PexaWidth?, respect \leftskip etc. (\pexa@setup@calcwidths)
\advance\hsize\leftskip
\advance\hsize\rightskip
%\leftskip0pt
%foo\par
%\show\leftskip \showthe\leftskip
%
% Dat: don't change and don't use \parindent
\def\par{\hskip\z@skip\@@par}% obey empty lines
\obeylines
\def\pexa@@vts{%
\pexa@@firstlinebeg
%\vrule height\topskip width\z@% superfluous, ruins \baselineskip
\global\let\pexa@@vts\relax
}%
%\show\leftskip \showthe\leftskip
\pexa@@showparshook % \raggedright etc.
% Dat: \pexa@@dopars is empty for \begin{egysoros}, not empty for \begin{code}
\pexa@@dopars
}
\def\pexa@@showparshook{}
% Dat: used by source-par-align=
% Dat: \centering, \raggedright and \raggedleft clobbers these:
% \\, \rightskip, \leftskip, \parindent, \parfillskip, \@rightskip.
% We ignore \\, \parindent and \@rightskip, we have to modifye (but not
% clobber) \rightskip, \leftskip and \parfillskip only. So we have our
% own macros.
\def\pexa@paralign@center{% similar to \centering
\leftskip 1\leftskip plus 1fil\relax
\rightskip1\rightskip plus 1fil\relax
\parfillskip\z@skip}
\def\pexa@paralign@left{% similar to \raggedright
% Dat: \leftskip and \rightskip are cumulative
\leftskip 1\leftskip\relax
\rightskip1\rightskip plus 1fill\relax
\parfillskip\z@skip}%
%\parfillskip\@flushglue}% Imp: is \@flushglue better here for the line breaking algorithm?
\def\pexa@paralign@right{% similar to \raggedleft
\leftskip 1\leftskip plus 1fil\relax
\rightskip1\rightskip\relax
\parfillskip\z@skip}
\def\pexa@paralign@justify{% last line left aligned, others justified
\leftskip 1\leftskip\relax
\rightskip1\rightskip\relax
\parfillskip\@flushglue}
\def\pexa@paralign@justjust{% all lines justified => lot of Underfull \hbox{}es
\leftskip 1\leftskip\relax
\rightskip1\rightskip\relax
\parfillskip\z@skip}
%** readded at Thu Dec 21 19:02:12 CET 2006
%** @param #1 filename
%** @param #2 options
\def\PexaInputSource#1#2{%
\begingroup
\edef\pexa@@cursourcename{#1}%
\PexaShowSource{#2}%
\endgroup
}
%** @param #1 options
%** Dat: not affected by samplewidth=
\def\PexaShowSource#1{%
\clubpenalty\@clubpenalty % allow club lines after \paragraph{x}y\par
\begingroup
\pexa@doopts{#1}%
\edef\reserved@a{\noexpand\PexaShowSourceMany
{\pexa@default@srcstyle}% 1
{\pexa@default@usewidth}% 2
{\pexa@default@xindent}% 3
{\pexa@default@yindent}% 4
}%
\expandafter\endgroup\reserved@a
}
%** Show the source of the previous \begin{WSource} / \begin{WBoth},
%** @param #1 source display style:
%** `left': aligned to the left margin
%** `center': center aligned (individual lines left aligned)
%** `right': right aligned (individual lines left aligned)
%** `leftnum': left aligned with left aligned line numbering
%** `leftnumcol': right flushed line numbering . left flushed source line
%** `leftnumhang': marginpar-hanging line numbering . left flushed source line
%** `leftboth': similar to \PexaShowBoth, but uses \PVerb (works only with \PSource)
%** `leftleft': two columns, left aligned with a \pexa@@vrule (works only with \PSource)
%** @param #2 width selector: `0': use full \hsize, `1': use \linewidth only,
%** `2': use \linewidth-\leftskip-\rightskip (because of \narrower)
%** @param #3 xindent: `none' | `deeper' | `narrower' | `deepright'
%** @param #4 yindent: `none' | `deeper'
\def\PexaShowSourceMany#1#2#3#4{%
\pexa@setup@calcwidths{#2}%
\begingroup
\pexa@xyindent{#3}{#4}%
% Dat: we don't need \pexa@@calcwidths now, it will be called later.
%\pexa@@calcwidths % \leftskip, \@totalleftmargin -> \tabskip
%\showthe\tabskip
\expandafter\ifx\csname pexa@ss@#1\endcsname\relax
\csname pexa@sh@#1\endcsname% do the actual \input
\else\csname pexa@ss@#1\endcsname\fi
\pexa@@undoyindent
\pexa@endparenvgroup
}%
\def\pexa@movedeeper{%
\ifnum\@listdepth=\z@ \leftmargin\z@ \rightmargin\z@ \fi% remove garbage
\edef\pexa@@restore@xmargins{%
\noexpand\leftmargin \the\leftmargin
\noexpand\rightmargin\the\rightmargin
}%
\ifnum \@listdepth >5\relax
\@toodeep
\else
%\showthe\@listdepth
\global\advance\@listdepth\@ne
\aftergroup\global\aftergroup\advance\aftergroup\@listdepth\aftergroup\m@ne
\fi
\rightmargin\z@
% vvv defined in size*.clo, sets \leftmargin, \rightmargin, \topsep, \parsep
% \itemsep etc.
\csname @list\romannumeral\the\@listdepth\endcsname
\let\pexa@@oncedeeper\@empty
}
\let\pexa@@restore@xmargins\@empty
% The \pexa@doxindent@... commands to the following:
%
% -- clobber \leftmargin and \rightmargin to an unused value
% -- set \parshape\z@
% -- decrease \linewidth by additional left and right margin
% -- increase \@totalleftmargin by additional right margin
% -- increase \leftskip by more additional left margin
% -- increase \rightskip by more additional right margin
\def\pexa@doxindent@none{%
%\advance\@totalleftmargin 5pt
\parshape\z@
}%
\def\pexa@doxindent@deeper{%
\pexa@@oncedeeper
%\showthe\linewidth
%\showthe\rightmargin
%
% vvv do proper Overfull \hbox calculations
% vvv not done by \pexa@@oncedeeper, for \begin{egysoros} at Wed Jul 7 08:20:23 CEST 2004
\advance\linewidth -\rightmargin
\advance\linewidth -\leftmargin
%
\advance\@totalleftmargin \leftmargin % do indentation
%\advance\leftskip1em
\parshape\z@% \parshape unused, converted to \tabskip
}
%** deeppre: move deeper, but keep old \leftmargin and \rightmargin
\def\pexa@doxindent@deeppre{%
\pexa@@oncedeeper
%\show\pexa@@restore@xmargins
\pexa@@restore@xmargins
% vvv Dat: removed for lakkbook at Fri Mar 26 17:24:23 CET 2004:
% \linewidth and \@totalleftmargin has already been modified; and
% \leftmargin and \rightmargin doesn't count
% !! make it indent with \begin{PSource} -- or =deeper?
\parshape\z@% \parshape unused, converted to \tabskip
}
\def\pexa@doxindent@narrower{\narrower}%
\def\pexa@doxindent@deepright{%
\pexa@@oncedeeper
\rightmargin\leftmargin
\advance\linewidth -\rightmargin
\advance\linewidth -\leftmargin
\advance\@totalleftmargin \leftmargin
\parshape\z@% \parshape unused, converted to \tabskip
}
\def\pexa@@str@addvspace{\addvspace}
\def\pexa@undo@nobreak{%
\if@nobreak
\@nobreakfalse
\ifnum\clubpenalty=\@M \clubpenalty\@clubpenalty \fi
\fi}
\def\pexa@doyindent@none{\let\pexa@@undoyindent\@empty
\pexa@undo@nobreak
\@endpetrue\@doendpe % automatic \noindent for text coming -- if not separated by newline
}%
\def\pexa@doyindent@deeper{%
\edef\pexa@@restoreleftskip{\leftskip\the\leftskip\space}%
\@rightskip\rightskip
\pexa@@oncedeeper
\@trivlist % calculates \@topsepadd depending on \ifvmode
%\show\par
\global\@newlistfalse
\pexa@undo@nobreak
\let\makelabel\@firstofone
\let\@itemlabel\@empty
\pexa@@restoreleftskip \let\pexa@@restoreleftskip\@undefined
\def\pexa@@undoyindent{%
% Dat: now \pexa@default@addvspace shouldn't contain \addvspace itself. Brr.
%\ifx\pexa@default@addvspace\pexa@@str@addvspace\else
% \let\addvspace\pexa@default@addvspace % used by \@endparenv called from \endtrivlist
%\fi
%\def\@endparenv{% original in latex.ltx
% \addpenalty\@endparpenalty\addvspace\@topsepadd\@endpetrue}
\def\@endparenv{% original latex.ltx
\addpenalty\@endparpenalty
\pexa@default@addvspace@bottom\@topsepadd
\@endpetrue}
\global\@newlistfalse
\endtrivlist}%
%\showthe\@topsepadd
%\show\pexa@default@addvspace@top
%\pexa@default@addvspace@top\@topsepadd % as calculated by \@trivlist
\expandafter\pexa@default@addvspace@top\expandafter{\the\@topsepadd}% !! as calculated by \@trivlist
}
\def\pexa@sh@left{\pexa@show@halign}
\def\pexa@ss@left{% \begin{egysoros}
\def\pexa@@everyparr{}%
\pexa@show@pars
}
\def\pexa@sh@center{%
\def\pexa@@beforehalign{\advance\tabskip\z@ plus1fill }%
\def\pexa@@preamble{####\hfil\tabskip\z@ plus1fill }%
\pexa@show@halign
}
\def\pexa@sh@right{%
\def\pexa@@preamble{####\hfil\tabskip\z@}%
\def\pexa@@beforehalign{\tabskip\z@ plus1fill }%
\pexa@show@halign
}
%** Similar to .dtx line numbering
\def\pexa@sh@leftnum{%
\def\pexa@@preamble{{\pexa@default@linenumberformat}####\hfil\tabskip\z@ plus1fill }%
\let\pexa@@cntb\pexa@default@addlinenum
\pexa@show@halign
}
%
%** Called from within an alignment (preamble).
\def\pexa@pre@leftboth@do{%
% Dat: \@tempdima has been set by \pexa@@beforehalign to the available
% width for the source
% Dat: \hb@xt@ will emit Overfull \hbox correctly
\if0\pexa@default@allowshrink\setbox0\hb@xt@\@tempdima\bgroup
\else\setbox0\hbox\bgroup\fi
\expandafter\expandafter\expandafter\PVerbOpt
\expandafter\expandafter\expandafter,%
\expandafter\expandafter\expandafter{%
\expandafter\@gobble\reserved@a}%
\hfil
\egroup
\labelsep\FBHLastDepth% Dat: I hope that \labelsep isn't used in \reserved@a
\global\FBHLastDepth\dp0
\setbox1\hbox{\reserved@a}% just a measurement
\ifdim\FBHLastDepth<\dp1 \global\FBHLastDepth\dp1 \fi
%
% vvv let \vrules meet. Better than \strut
\ifdim\baselineskip>\labelsep
% Dat: safe to modify \@tempdimb here, because we're inside a group of an alignment
\@tempdimb\baselineskip \advance\@tempdimb-\labelsep
\vrule\@height\@tempdimb\@width\z@\space
\fi
}
\def\pexa@pre@leftboth@put{%
\advance\@tempdima-\wd0
%%\show\pexa@default@allowshrink
\if0\pexa@default@allowshrink\box0
\else
\unhbox0
\ifdim\@tempdima>\z@\if2\pexa@default@allowshrink\else
\kern\@tempdima
\null
\fi\fi
\fi
}%
\def\pexa@pre@leftboth@beforehalign{%
%\def~{;;}%\nobreakspace{}}%
\let\\\relax% ignore newlines in sample
\lineskiplimit\z@ \lineskip\z@% !! more liberal, accept negative
\newdimen\FBHLastDepth% for \global
\FBHLastDepth\baselineskip
%
%\show\PexaWidth
\@tempdimb\PexaWidth\relax
\let\PexaWidth\@tempdimb
\@tempdima-\pexa@default@samplewidth\relax% do arithmetic: .5\PexaWidth
\advance\@tempdima\PexaWidth
\edef\PexaWidth{\the\@tempdimb\space}%
%\@tempdima\PexaWidth
%\advance\@tempdima-\pexa@default@samplewidth
\setbox1\hbox{\pexa@@vrule{}}%
\advance\@tempdima-\wd1
%\hrule height 1pt width 10pt
}%
\def\pexa@sh@leftboth{%
\let\pexa@@beforehalign\pexa@pre@leftboth@beforehalign
\def\pexa@@eachline##1{##1&&##1}%
\def\pexa@@preamble{%
\def\reserved@a{####}%
%\show\reserved@a%
\pexa@pre@leftboth@do
\pexa@pre@leftboth@put
% ^^^ \@gobble removes \relax inserted by \pexa@plines@start
\hfil\tabskip\z@skip&
\pexa@@vrule{}####&% Dat: \copy2 wouldn't work by this time
{####}\tabskip\z@ plus1fill\hfil}% Dat: \selectlanguage inside #### needs an extra {group}
\pexa@plines@notverbatim
\pexa@show@halign
}
%
\def\pexa@pre@leftleft@measure{%
% Dat: \@tempdima has been set by \pexa@@beforehalign to the available
% width for the source
% Dat: \hb@xt@ will emit Overfull \hbox correctly
\setbox0\hbox{\reserved@a}% just a measurement
\ifdim\FBHLastDepth<\dp0 \global\FBHLastDepth\dp0 \fi
}%
\def\pexa@ampersand{&}%
\def\pexa@sh@leftleft{%
\let\pexa@@beforehalign\pexa@pre@leftboth@beforehalign
\def\pexa@@preamble{%
\relax
\ifdim\baselineskip>\FBHLastDepth
% Dat: safe to modify \@tempdimb here, because we're inside a group of an alignment
\@tempdimb\baselineskip \advance\@tempdimb-\FBHLastDepth
\vrule\@height\@tempdimb\@width\z@\space
\fi
% vvv let \vrules meet. Better than \strut
\global\FBHLastDepth\z@
\def\reserved@a{####}%
\pexa@pre@leftleft@measure \pexa@pre@leftboth@put
\hfil\tabskip\z@skip&\pexa@@vrule{}\pexa@ampersand####&%
\def\reserved@a{####}%
\pexa@pre@leftleft@measure \unhbox0
\tabskip\z@ plus1fill\hfil}%
\pexa@plines@notverbatim
\pexa@show@halign
}
%
\def\pexa@pre@numcol@eachrow{{\pexa@default@linenumberformat}&}%
\def\pexa@sh@leftnumcol{%
\def\pexa@@preamble{\hfil\pexa@pre@numcol@eachrow####&####\hfil\tabskip\z@ plus1fill }%
\let\pexa@@cntb\pexa@default@addlinenum
\pexa@show@halign
}
%
\def\pexa@sh@leftnumhang{%
\def\pexa@@preamble{\hb@xt@\pexa@default@linenumberwidth{\hss\pexa@default@linenumberformat}####\hfil\tabskip\z@ plus1fill }%
\let\pexa@@cntb\pexa@default@addlinenum
\pexa@show@halign
}
\def\pexa@ss@leftnumhang{%
\def\pexa@@everyparr{%
\pexa@decr\pexa@@cntb
\hb@xt@\pexa@default@linenumberwidth{\hss\pexa@default@linenumberformat}%
}
\let\pexa@@cntb\pexa@default@addlinenum
\pexa@show@pars
}
%** Default.
%** @param #1 desired height; specified by horizontal neighbours if empty
\def\pexa@@vrule#1{%
%\ifx\hfuzz#1\hfuzz
\kern\tabcolsep
\kern-.5\tabcolsep
\kern-.5\arrayrulewidth
\ifx\hfuzz#1\hfuzz
\vrule\@width\arrayrulewidth
\else
\vrule\@width\arrayrulewidth\@height#1\relax
\fi
\kern-\arrayrulewidth
\kern.5\arrayrulewidth
\kern.5\tabcolsep
%\else
%\fi
}
%** @param #1 to gobble a space token
\def\pexa@doopt#1,{%
\if,\noexpand#1,% ignore multiple commas (#1 is empty)
\expandafter\pexa@doopt
\else
\csname fi\endcsname% don't count as `\fi' when being skipped
\pexa@doopt@low#1,=,%
\fi
}
\iftrue\csname fi\endcsname% \def\pexa@doopt@low contains `\fi'. Make it skippable.
%** @param #1 is here for gobbling space tokens
%** @param #4 \fi -- will be ignored
\def\pexa@doopt@low#1#2=#3,#4\fi{%
% Dat: Normal case: #1#2 is key, #3 is value, #4 is `=,'
% Dat: MissingArg case: #1#2 is `key,', #3 is empty, #4 is empty
% Dat: Terminator case: #1#2 is `\hfuzz,', #3 is empty, #4 is empty
% Dat: OnlySpace case: #1 is `,', #2 is empty, #3 is empty, #4 is empty
\ifx\relax#4\relax% MissingArg or Terminator
\ifx#1\hfuzz% Terminator
\else
\if,\noexpand#1\else% OnlySpace case
\pexa@doopt@missingval#1#2% #2 already contains comma at end
\fi
\expandafter\expandafter\expandafter\pexa@doopt
\fi
\else% Normal
\expandafter\ifx\csname pexa@opt@@#1#2\endcsname\hfuzz
\expandafter\ifx\csname pexa@opt@@#1#2@#3\endcsname\relax
\PackageError{examplep}{Invalid arg for option: #1#2 = #3}\@ehc
\else
\csname pexa@opt@@#1#2@#3\endcsname
\fi
\else
\expandafter\ifx\csname pexa@opt@@#1#2\endcsname\relax
\PackageError{examplep}{Unknown option: #1#2 (= #3)}\@ehc
\else
\csname pexa@opt@@#1#2\endcsname{#3}%
\fi
\fi
\expandafter\pexa@doopt
\fi
}
\def\pexa@doopt@missingval#1,{%
\PackageError{examplep}{Value (=) missing for option: #1}\@ehc
}
%** Dat: Spaces and newlines at end of #1 are not ignored, so please prefix
%** them with a comma, e.g \pexa@doopts{foo=bar, }
%** @param #1 comma-separated optoinname=value pairs
\def\pexa@doopts#1{\pexa@doopt #1,\hfuzz,}%
\let\PexaDefaults\pexa@doopts
\def\pexa@opt@@samplewidth#1{\def\pexa@default@samplewidth{#1}}%
\def\pexa@opt@@firstlinenum#1{%
\begingroup\@tempcnta\number-#1\relax
\advance\@tempcnta\@ne
\edef\reserved@a{\def\noexpand\pexa@default@addlinenum{\the\@tempcnta}}%
\expandafter\endgroup\reserved@a
}
%** A dimension. Depth that yalign=v should neglect at the bottom of the Sample.
%** Should not be too much (i.e more than the depth of `g'), because a page
%** break might occur just below the Sample, and too much text would be put
%** below the bottom margin.
\def\pexa@opt@@vextrabotdepth#1{\def\pexa@default@vextrabotdepth{#1}}
\def\pexa@opt@@addlinenum#1{\def\pexa@default@addlinenum{\number-#1}}
\def\pexa@opt@@linenumbersep#1{\def\pexa@default@linenumbersep{#1}}
\def\pexa@opt@@linenumberformat#1{\def\pexa@default@linenumberformat{#1}}
%** lb.sty overrides it: \def\pexa@default@addvspace{\lakkbook@vspace}
\expandafter\def\csname pexa@opt@@addvspace-top\endcsname#1{\def\pexa@default@addvspace@top{#1}}
\expandafter\def\csname pexa@opt@@addvspace-bottom\endcsname#1{\def\pexa@default@addvspace@bottom{#1}}
%** Extra vertical distance for aligning top lines at yalign=v
\def\pexa@opt@@vextravskip#1{\def\pexa@default@vextravskip{#1}}
%** Maximum height of ``small'' sample at yalign=v
\def\pexa@opt@@vsmallht#1{\def\pexa@default@vsmallht{#1}}
\def\pexa@opt@@linenumberwidth#1{\def\pexa@default@linenumberwidth{#1}}
\expandafter\def\csname pexa@opt@@pexaminipage-setuphook\endcsname#1{\def\pexa@@minipage@setuphook{#1}}
\def\pexa@opt@@xalign@l{\def\pexa@default@xalign{l}}%
\def\pexa@opt@@xalign@r{\def\pexa@default@xalign{r}}%
\let\pexa@opt@@xalign\hfuzz
%** These correspond to \pexa@sa@u and \pexa@sa@b
\def\pexa@opt@@yalign@b{\def\pexa@default@yalign{b}}% align \vtop baselines
\def\pexa@opt@@yalign@u{\def\pexa@default@yalign{u}}% align upper corners
\def\pexa@opt@@yalign@v{\def\pexa@default@yalign{v}}% align upper corners, with baseline grid
\let\pexa@opt@@yalign\hfuzz
\def\pexa@opt@@xindent@none{\def\pexa@default@xindent{none}}%
\def\pexa@opt@@xindent@deeper{\def\pexa@default@xindent{deeper}}%
\def\pexa@opt@@xindent@deeppre{\def\pexa@default@xindent{deeppre}}%
\def\pexa@opt@@xindent@narrower{\def\pexa@default@xindent{narrower}}%
\def\pexa@opt@@xindent@deepright{\def\pexa@default@xindent{deepright}}%
\let\pexa@opt@@xindent\hfuzz
\def\pexa@opt@@yindent@none{\def\pexa@default@yindent{none}}%
\def\pexa@opt@@yindent@deeper{\def\pexa@default@yindent{deeper}}%
\let\pexa@opt@@yindent\hfuzz
\def\pexa@opt@@Q@yes{\pexa@activate@Q}%
\def\pexa@opt@@Q@unchanged{}%
\let\pexa@opt@@Q\hfuzz
\def\pexa@opt@@bsdiv@yes{\pexa@activate@bsdiv}%
\def\pexa@opt@@bsdiv@unchanged{}%
\let\pexa@opt@@bsdiv\hfuzz
\def\pexa@opt@@div@yes{\pexa@activate@div}%
\def\pexa@opt@@div@unchanged{}%
\let\pexa@opt@@div\hfuzz
\def\pexa@opt@@url@yes{\pexa@activate@url}%
\def\pexa@opt@@url@unchanged{}%
\let\pexa@opt@@url\hfuzz
\def\pexa@opt@@boxstyle@h{\def\pexa@default@boxstyle{h}}%
\def\pexa@opt@@boxstyle@v{\def\pexa@default@boxstyle{v}}%
\def\pexa@opt@@boxstyle@m{\def\pexa@default@boxstyle{m}}%
\def\pexa@opt@@boxstyle@p{\def\pexa@default@boxstyle{p}}%
\def\pexa@opt@@boxstyle@V{\pexa@optboxstyle@noboth\def\pexa@default@boxstyle{V}}%
\def\pexa@opt@@boxstyle@M{\pexa@optboxstyle@noboth\def\pexa@default@boxstyle{M}}%
\def\pexa@opt@@boxstyle@P{\pexa@optboxstyle@noboth\def\pexa@default@boxstyle{P}}%
\def\pexa@opt@@boxstyle@G{\pexa@optboxstyle@noboth\def\pexa@default@boxstyle{G}}%
\let\pexa@opt@@boxstyle\hfuzz
\let\pexa@optboxstyle@noboth\@empty
\def\pexa@optboxstyle@inboth{\PackageError{pexample}{Arg unapplicable for boxstyle=}\@ehc}
%** allowshrink=yesmin works only for \begin{PSource}[srcstyle=leftboth] and
%** [srcstyle=leftleft]
\def\pexa@opt@@allowshrink@force{\def\pexa@default@allowshrink{2}}%
\def\pexa@opt@@allowshrink@yes{\def\pexa@default@allowshrink{1}}%
\def\pexa@opt@@allowshrink@no{\def\pexa@default@allowshrink{0}}%
\let\pexa@opt@@allowshrink\hfuzz
\def\pexa@opt@@allowbreak@yes{\def\pexa@default@allowbreak{1}}%
\def\pexa@opt@@allowbreak@no{\def\pexa@default@allowbreak{0}}%
\let\pexa@opt@@allowbreak\hfuzz
\def\pexa@opt@@inlineprefix#1{%
% Imp: separate our (local) usage of \verbfwr$percent from other applications
% Dat: \if instead of \ifx because of \active:
\def\verbfwr@percent##1##2\relax{%
\ifx##1\relax\def\VerbFwrLines{}\else
\if\noexpand##1#1\relax\def\VerbFwrLines{##2}\else\def\VerbFwrLines{##1##2}\fi\fi}%
}
\def\pexa@opt@@srcstyle#1{%
\expandafter\ifx\csname pexa@sh@#1\endcsname\relax
\PackageError{examplep}{Unknown srcstyle: srcstyle = #1}\@ehc
\else\edef\pexa@default@srcstyle{#1}\fi%
}
%** usewidth=hsize: use full \hsize
%** usewidth=linewidth: use only \linewidth (\hsize - \@totalleftmargin -
%** - total_right_margin)
%** usewidth=skipwidth: use \linewidth - \leftskip - \rightskip
\def\pexa@opt@@usewidth@skipwidth{\def\pexa@default@usewidth{2}}%
\def\pexa@opt@@usewidth@linewidth{\def\pexa@default@usewidth{1}}%
\def\pexa@opt@@usewidth@hsize {\def\pexa@default@usewidth{0}}%
\let\pexa@opt@@usewidth\hfuzz
\expandafter\def\csname pexa@opt@@pverb-leftbreakmin@0\endcsname {\def\pexa@default@pverbleftbreakmin{0}}%
\expandafter\def\csname pexa@opt@@pverb-leftbreakmin@1\endcsname {\def\pexa@default@pverbleftbreakmin{1}}%
\expandafter\def\csname pexa@opt@@pverb-leftbreakmin@2\endcsname {\def\pexa@default@pverbleftbreakmin{2}}% Dat: higher values not implemented
\expandafter\let\csname pexa@opt@@pverb-leftbreakmin\endcsname\hfuzz
%\def\pexa@@showparshook{}
\expandafter\def\csname pexa@opt@@source-par-align@left\endcsname {\def\pexa@@showparshook{\pexa@paralign@left}}
\expandafter\def\csname pexa@opt@@source-par-align@right\endcsname {\def\pexa@@showparshook{\pexa@paralign@right}}
\expandafter\def\csname pexa@opt@@source-par-align@center\endcsname {\def\pexa@@showparshook{\pexa@paralign@center}}
\expandafter\def\csname pexa@opt@@source-par-align@justify\endcsname{\def\pexa@@showparshook{\pexa@paralign@justify}}
\expandafter\def\csname pexa@opt@@source-par-align@justjust\endcsname{\def\pexa@@showparshook{\pexa@paralign@justjust}}
\expandafter\def\csname pexa@opt@@source-par-align@unchanged\endcsname{\def\pexa@@showparshook{}}
\expandafter\let\csname pexa@opt@@source-par-align\endcsname\hfuzz
\expandafter\def\csname pexa@opt@@source-space@invdisc\endcsname {\def\pexa@default@space{\nobreak\discretionary{\char32}{}{\hbox{\ }}\nobreak\hskip\z@skip}}% breakable with discretionary
\expandafter\def\csname pexa@opt@@source-space@invbreak\endcsname {\def\pexa@default@space{\ }}% breakable
\expandafter\def\csname pexa@opt@@source-space@invfixbreak\endcsname{\def\pexa@default@space{\ {\@tempdima\lastskip\unskip\hskip\@tempdima}}}% breakable
\expandafter\def\csname pexa@opt@@source-space@invnobreak\endcsname {\def\pexa@default@space{\leavevmode\nobreak\ }}% nonbreakable
\expandafter\def\csname pexa@opt@@source-space@visnobreak\endcsname {\def\pexa@default@space{\char32 }}% visible in \tt, nonbreakable
\expandafter\def\csname pexa@opt@@source-space@visbreak\endcsname {\def\pexa@default@space{\hskip\z@skip\char32 \hskip\z@skip}}% visible in \tt, breakable
\expandafter\let\csname pexa@opt@@source-space\endcsname\hfuzz
% vvv Dat: pverb-space=invbreak will break, but not stretch or shrink
% vvv Dat: they need \pexa@cverb@skipbreak@i
\expandafter\def\csname pexa@opt@@pverb-space@invbreak\endcsname {\def\pexa@cverb@@space{\ \pexa@cverb@skipbreak@i}}% breakable
\expandafter\def\csname pexa@opt@@pverb-space@invdisc\endcsname {\def\pexa@cverb@@space{\nobreak\discretionary{\char32}{}{\hbox{\ }}\nobreak\hskip\z@skip \pexa@cverb@skipbreak@i}}% breakable with discretionary
\expandafter\def\csname pexa@opt@@pverb-space@invbreakleft\endcsname{\def\pexa@cverb@@space{\ \nobreak\hskip0pt plus1fil\null\hskip0pt plus-1fil\pexa@cverb@skipbreak@i}}% breakable; SUXX: has infinite stretchability in the middle of a line(??)
\expandafter\def\csname pexa@opt@@pverb-space@invnobreak\endcsname{\def\pexa@cverb@@space{\leavevmode\nobreak\ \pexa@cverb@skipbreak@i}}% nonbreakable
\expandafter\def\csname pexa@opt@@pverb-space@visnobreak\endcsname{\def\pexa@cverb@@space{\char32 \pexa@cverb@skipbreak@i}}% visible in \tt, nonbreakable
\expandafter\def\csname pexa@opt@@pverb-space@visbreak\endcsname {\def\pexa@cverb@@space{\hskip\z@skip\char32 \hskip\z@skip\pexa@cverb@skipbreak@i}}% visible in \tt, breakable
%
\expandafter\let\csname pexa@opt@@pverb-space\endcsname\hfuzz
\expandafter\def\csname pexa@opt@@pverb-hash@full\endcsname{\def\pexa@default@fullhash{1}}%
\expandafter\def\csname pexa@opt@@pverb-hash@half\endcsname{\def\pexa@default@fullhash{0}}%
\expandafter\let\csname pexa@opt@@pverb-hash\endcsname\hfuzz
\expandafter\def\csname pexa@opt@@pverb-hyphenchar@char'30\endcsname {\def\pexa@cverb@@hyphenchar{\hyphenchar\font=\string'30 }}% allow auto-hyphenation of words
\expandafter\def\csname pexa@opt@@pverb-hyphenchar@hyphen\endcsname {\def\pexa@cverb@@hyphenchar{\hyphenchar\font=\string`-}}% allow auto-hyphenation of words
\expandafter\def\csname pexa@opt@@pverb-hyphenchar@none\endcsname {\def\pexa@cverb@@hyphenchar{\hyphenchar\font=-1 }}% disallow auto-hyphenation of words
\expandafter\def\csname pexa@opt@@pverb-hyphenchar@unchanged\endcsname{\def\pexa@cverb@@hyphenchar{}}% keep default \hyphenchar\font
\expandafter\let\csname pexa@opt@@pverb-hyphenchar\endcsname\hfuzz
\expandafter\def\csname pexa@opt@@pverb-verbatimfont@ttfamily\endcsname {\def\pexa@cverb@@verbatimfont{\ttfamily}}%
\expandafter\def\csname pexa@opt@@pverb-verbatimfont@pexavf\endcsname {\def\pexa@cverb@@verbatimfont{\pexa@@verbatimfont}}%
\expandafter\def\csname pexa@opt@@pverb-verbatimfont@latexvf\endcsname {\def\pexa@cverb@@verbatimfont{\verbatim@font}}%
\expandafter\def\csname pexa@opt@@pverb-verbatimfont@unchanged\endcsname{\def\pexa@cverb@@verbatimfont{}}%
\expandafter\let\csname pexa@opt@@pverb-verbatimfont\endcsname\hfuzz
\expandafter\def\csname pexa@opt@@psource-verbatimfont@ttfamily\endcsname {\def\pexa@default@verbatimfont{\ttfamily}}%
\expandafter\def\csname pexa@opt@@psource-verbatimfont@pexavf\endcsname {\def\pexa@default@verbatimfont{\pexa@@verbatimfont}}%
\expandafter\def\csname pexa@opt@@psource-verbatimfont@latexvf\endcsname {\def\pexa@default@verbatimfont{\verbatim@font}}%
\expandafter\def\csname pexa@opt@@psource-verbatimfont@unchanged\endcsname{\def\pexa@default@verbatimfont{}}%
\expandafter\let\csname pexa@opt@@psource-verbatimfont\endcsname\hfuzz
\expandafter\def\csname pexa@opt@@pverb-linebreak@char\endcsname{\def\pexa@cverb@@tbreak{\PexaAllowBreak}}%
\expandafter\def\csname pexa@opt@@pverb-linebreak@yes\endcsname {\def\pexa@cverb@@tbreak{\allowbreak}}% allow silent line break
\expandafter\def\csname pexa@opt@@pverb-linebreak@no\endcsname {\def\pexa@cverb@@tbreak{}}% disallow line break
\expandafter\let\csname pexa@opt@@pverb-linebreak\endcsname\hfuzz
\expandafter\def\csname pexa@opt@@pverb-linebreakchar\endcsname#1{\def\pexa@cverb@@tbreakchar{#1}}%
\expandafter\def\csname pexa@opt@@pverb-stretchshrink@unchanged\endcsname{\def\pexa@cverb@@stretchshrink{}}% keep default
\expandafter\def\csname pexa@opt@@pverb-stretchshrink@yes\endcsname {\def\pexa@cverb@@stretchshrink{\fontdimen3\font=0.166666666\fontdimen6\font\relax \fontdimen4\font=0.111111111\fontdimen6\font\relax}}% Dat: \fontdimen6 is quad
\expandafter\def\csname pexa@opt@@pverb-stretchshrink@no\endcsname {\def\pexa@cverb@@stretchshrink{\fontdimen3\font=\z@ \fontdimen4\font=\z@}}% disallow line break
\expandafter\let\csname pexa@opt@@pverb-stretchshrink\endcsname\hfuzz
\expandafter\def\csname pexa@opt@@baseline-grid@yes\endcsname {\def\pexa@default@baselinegrid{1}}%
\expandafter\def\csname pexa@opt@@baseline-grid@no\endcsname {\def\pexa@default@baselinegrid{0}}%
\expandafter\let\csname pexa@opt@@baseline-grid\endcsname\hfuzz
\expandafter\def\csname pexa@opt@@mp-equation-reset@yes\endcsname {\def\pexa@@equation{}}%
\expandafter\def\csname pexa@opt@@mp-equation-reset@no\endcsname {\def\pexa@@equation{equation}}%
\expandafter\let\csname pexa@opt@@mp-equation-reset\endcsname\hfuzz
% vvv reset auxilary \newcounter{vrcnt} defined by varioref.sty to zero? Recommended: no.
\expandafter\def\csname pexa@opt@@mp-varioref-reset@yes\endcsname {\def\pexa@@vrcnt{}}%
\expandafter\def\csname pexa@opt@@mp-varioref-reset@no\endcsname {\def\pexa@@vrcnt{vrcnt}}%
\expandafter\let\csname pexa@opt@@mp-varioref-reset\endcsname\hfuzz
% ---
\def\PexaAllowBreak{%
\nobreak\hskip\z@skip
%\penalty\hyphenpenalty% Dat: this is completely wrong here, because it
% allows a line break at the \penalty. TeX will insert \hyphenpenalty or
% \exhyphenpenalty automatically.
\discretionary{\hbox{\pexa@cverb@@tbreakchar}}{}{}\nobreak\hskip\z@skip}
%** `\begin{PSource}[srcstyle=leftboth]' is an alternative of
%** `\begin{WBoth}...\PexaShowBoth'. The former allows page breaks between
%** lines, but uses the non-\catcode-based \PVerb.
\def\PexaShowBoth#1{%
\clubpenalty\@clubpenalty % allow club lines after \paragraph{x}y\par
\begingroup
\pexa@doopts{#1}%
\expandafter\@temptokena\expandafter{\pexa@default@samplewidth}%
\edef\reserved@a{\noexpand\PexaShowBothMany
{\the\@temptokena}% 1
{\pexa@default@xalign}% 2
{\pexa@default@yalign}% 3
{\pexa@default@boxstyle}% 4
{\pexa@default@allowshrink}% 5
{\pexa@default@allowbreak}% 6
{\pexa@default@srcstyle}% 7
{\pexa@default@usewidth}% 8
{{\pexa@default@xindent}{\pexa@default@yindent}}% 9
}%
%%\show\reserved@a
\expandafter\endgroup\reserved@a
}%
\def\pexa@xyindent#1#2{%
%\expandafter\show\csname pexa@doyindent@#2\endcsname
\let\pexa@@oncedeeper\pexa@movedeeper
\csname pexa@doyindent@#2\endcsname
\vskip\z@skip% do this after doyindent, so \@trivlist\ifvmode might decide about \@partopskip
\csname pexa@doxindent@#1\endcsname
}
%** Shows the Source (to the left) and the Sample (to the right), facing, in
%** the specified style.
%** @param #1 dimen: width of Sample (\hsize, paragraph width). Example: .4\hsize or .4\PexaWidth
%** @param #2 Sample horizontal alignment: `l' is left; `r' is right. `r'
%** almost always makes sense only with #4=`h'
%** @param #3 vertical alignment of Sample and Source: `b': align top
%** baselines. `u': align upper bounding box lines
%** @param #4 boxing style of Sample: `h' is \hbox, `v' is \vbox (or \vtop,
%** respectively), `m' is minipage, `p' is PexaMinipage (recommended).
%** Capital letters disallowed.
%** @param #5 `1': allow Sample to shrink if Source is too wide, `0': don't
%** @param #6 `1': allow page break in Source, `0': don't
%** @param #7 source display style, see possible values at \PexaShowSource
%** @param #8 width selector, see docs at \PexaShowSource
%** @param #9 {{xindent}{yindent}}
%** Special one-pass case for #5=`1', #6='0' etc.
\def\PexaShowBothMany#1#2#3#4#5#6#7#8#9{%
\begingroup
%\hrule%!!
\let\pexa@optboxstyle@noboth\pexa@optboxstyle@inboth
\csname pexa@opt@@boxstyle@#4\endcsname% verify correct usage
\pexa@setupverb@read% interpret ^ for measurements
% Dat: not late to test \ifvmode now
\pexa@xyindent#9%
% ^^^ do this early, so <measuring> will have a chance to measure correct width
% Now: We have \leftskip, \rightskip, \linewidth and \@totalleftmargin
% set up. These won't affect the sample, because \pexa@setsample@...
% calls \pexa@hsizesetup, which zero them all out.
\pexa@setup@calcwidths{#8}% sets \PexaWidth and possibly clobbers \@tempdimb
% Dat: \pexa@setup@calcwidths might have said \let\PexaWidth\@tempdimb,
% which isn't safe, so we want to expand it
% Dat: safe to clobber \@tempdima and \@tempdimb, we're in \begingroup
\@tempdimb\PexaWidth\relax
\let\PexaWidth\@tempdimb
\@tempdima#1\relax% do arithmetic: .5\PexaWidth
\edef\PexaWidth{\the\@tempdimb\space}%
\expandafter\pexa@showbothmany@low\expandafter{\the\@tempdima}{#2}{#3}{#4}{#5}{#6}{#7}%
}
\def\pexa@showbothmany@low#1#2#3#4#5#6#7{%
% Dat: #1 might be .5\PexaWidth
\if#50% Don't allow the sample to shrink. Its width will be exactly #1.
\@tempdima#1\relax
\else% <measuring>
% #5 allows the Sample to shrink. Now we call \pexa@sh@#7 just to measure
% the width of the Source. From that we will be able to deduce the width of
% the Sample.
\@tempdima\PexaWidth
%\showthe\tabskip
% vvv This is the first time we call \pexa@default@verbatimfont
\setbox0\vtop{\leftskip\z@skip \@totalleftmargin\z@ \let\pexa@@tolinewidth\@empty \csname pexa@sh@#7\endcsname}%
%%\vbox{\hrule\copy0\hrule}%
\advance\@tempdima-\wd0 \setbox0\box\voidb@x
\setbox1\hbox{\pexa@@vrule{}}\advance\@tempdima-\wd1
\ifdim#1<\@tempdima \@tempdima#1\relax\fi
%%\@tempdima=200pt
\fi% </measuring>
% \advance\@tempdima\@totalleftmargin\advance\@tempdima\leftskip% !! Dat: a failed attempt to put the \vrule to the middle
%\edef\pexa@@samplewidth{\the\@tempdima}% superfluous
% Dat: now \@tempdima is actual Sample width
\if#60\def\pexa@@preamblecr{\cr\noalign{\nobreak}}% disallow page break in Source
\else\let\pexa@@preamblecr\pexa@preamblecr@keep\fi
\edef\reserved@a{\catcode`^7\relax% change \catcode back to superscript (undo \pexa@setupverb@read)
\setbox1\expandafter\noexpand\csname pexa@setsample@#4\endcsname{\the\@tempdima}}%
\edef\reserved@b{%
%\noexpand\pexa@xyindent#9%
% Dat: too late to \noexpand\verbfwr@default@acts
\noexpand\pexa@setupverb@read% do correct display
\noexpand\pexa@setup@savetabskip
%\def\no\pexa@default@verbatimfont{\bbbbb}%
\expandafter\noexpand\csname pexa@sa@#3\endcsname
{\if#2r\wd1\else\the\@tempdima\fi}% will expand \@tempdima early
\expandafter\noexpand\csname pexa@sh@#7\endcsname
}%
%\show\reserved@a% \catcode `^7\relax \setbox 1\pexa@setsample@p {184.9429pt}.
%\show\reserved@b% \pexa@setupverb@read \pexa@setup@savetabskip \pexa@sa@u {184.9429pt}\pexa@sh@leftnumhang
\expandafter\reserved@a\reserved@b
% ^^^ This \expandafter trick expands \@tempdima early
\pexa@@undoyindent
\pexa@endparenvgroup
}
%** \pexa@@undoyindent calls \endtrivlist, which sets \@endpetrue, and if we
%** are in an environment (such as \begin{PWSource}), \end calls \@doendpe,
%** which which sets up \par and \everypar, so an automatic \noindent can be
%** forced.
\def\pexa@endparenvgroup{%
\if@endpe\endgroup\@endpetrue\else\endgroup\@endpefalse\fi% see also \PexaShow
}
\def\pexa@setup@savetabskip{%
\begingroup
\pexa@@calcwidths
\edef\reserved@a{\def\noexpand\pexa@@savetabskip{\the\tabskip}}%
\expandafter\endgroup\reserved@a
}
\def\pexa@hsizesetup{%
% Imp: possibly zero out \@listdepth etc., but don't forget to set it back.
\leftskip\z@skip
\rightskip\z@skip
\textwidth\hsize
\linewidth\hsize
\columnwidth\hsize
\parshape\z@
\@totalleftmargin\z@
\@twocolumnfalse
}
\def\pexa@setsample@h#1{%
% Dat: _not_ \hbox to#1. But why??
\hbox{\hsize#1\relax\pexa@hsizesetup\input\pexa@@samplename\space\par}%
}
\def\pexa@setsample@v#1{%
\vtop{\hsize#1\relax\pexa@hsizesetup\input\pexa@@samplename\space\par}%
}
\def\pexa@setsample@V#1{%
\vbox{\hsize#1\relax\pexa@hsizesetup\input\pexa@@samplename\space\par}%
}
\def\pexa@setsample@m#1{%
\hbox{%
\noindent\begin{minipage}[t]{#1}%
\input\pexa@@samplename\space\par
\end{minipage}%
}%
}
\def\pexa@setsample@p#1{%
\hbox{%
\noindent\begin{PexaMinipage}[t]{#1}%
\pexa@hsizesetup
\input\pexa@@samplename\space\par
\end{PexaMinipage}%
}%
}
\def\pexa@setsample@M#1{%
\hbox{%
\noindent\begin{minipage}[b]{#1}%
\pexa@hsizesetup
\input\pexa@@samplename\space\par
\end{minipage}%
}%
}
\def\pexa@setsample@P#1{%
% \def\pexa@@bpmp{\begin{PexaMinipage}}
% \expandafter\pexa@@bpmp\input\pexa@@samplename\space % doesn't work :-(
\hbox{%
\noindent\begin{PexaMinipage}[b]{#1}%
\pexa@hsizesetup
\input\pexa@@samplename\space\par
\end{PexaMinipage}%
}%
}
\def\pexa@setsample@G#1{\begingroup\hsize#1\relax\pexa@hsizesetup\input\pexa@@samplename\space\endgroup}
%** Dat: height of \pexa@@vrule only depends on the height of the sample
%** @param #1 desired Sample width
%** @param #2 one of \pexa@sh@...
\def\pexa@sa@b#1#2{
%\leftskip\z@ \rightskip\z@ \parshape\z@% Wrong. Too Early.
\vskip\z@skip
\def\pexa@@cnta{0}%
\@tempdima\dp1 % not modified by \pexa@show@halign
\advance\@tempdima\baselineskip
\setbox0\hbox{\pexa@@vrule{}}%
\@tempdimc\PexaWidth \advance\@tempdimc-\wd0 \advance\@tempdimc-#1\relax %\advance\linewidth\tabskip
\edef\pexa@@savetabskip{\the\@tempdimc\space}%
\def\pexa@@firstlinebeg{%
\vadjust{\kern\dp1 \hrule\@height\z@\vskip-\dp1 }% ensure that figure fits
\vtop to\z@{\hb@xt@\z@{\kern\pexa@@savetabskip
\@tempdima\dp1 \advance\@tempdima\ht1
\lower\dp1\hbox{\expandafter\pexa@@vrule\expandafter{\the\@tempdima}}%
\box1 \hss}\vss}% Dat: \hb@xt@\z@ is needed
% ^^^ Dat: \@totalleftmargin and \leftskip takes place here (as part of initial \tabskip)
}%
#2% \pexa@show@halign etc.
\advance\@tempdima\pexa@@cnta\baselineskip
% vvv Dat: a little less than \baselineskip, because \vtop has less??
\advance\@tempdima-\baselineskip \advance\@tempdima\topskip
% vvv Dat: use \kern, not \vskip, so \unskip won't undo it
\ifdim\@tempdima>\z@ \kern\@tempdima\fi% display is longer than source
%%\message{Left=\pexa@@cnta}
}
%** \box1 already contains the Sample
%** @param #1 desired Sample width
%** @param #2 one of \pexa@sh@...
\def\pexa@sa@u#1#2{%
%%\show\pexa@@tolinewidth \showthe\PexaWidth
%%\tracingcommands1 \tracingmacros1
\vskip\z@skip% go to vertical mode
\edef\pexa@@restore@prevdepth{\prevdepth\the\prevdepth}%
\def\pexa@@cnta{0}%
%\@tempdima\dp1 \advance\@tempdima10.54352pt \dp1\@tempdima
\@tempdima\dp1 \advance\@tempdima\ht1
\if1\pexa@default@baselinegrid
\ifdim\@tempdima<256\baselineskip\else \advance\@tempdima-256\baselineskip\fi
\ifdim\@tempdima<128\baselineskip\else \advance\@tempdima-128\baselineskip\fi
\ifdim\@tempdima <64\baselineskip\else \advance\@tempdima -64\baselineskip\fi
\loop\ifdim\@tempdima>\z@ \advance\@tempdima-\baselineskip\repeat
\@tempdima-\@tempdima
\advance\@tempdima\dp1 \dp1\@tempdima
\fi
\@tempdima\dp1 \advance\@tempdima\ht1
% !! sample might be too tall, try single-line samples: (??)
% \begin{WBoth}Foo\end{WBoth}\PexaShowBoth{}\PexaShowBoth
\nointerlineskip\vbox to\z@{% This \vbox screws up \vskip{}s at page break
\setbox0\hbox{\pexa@@vrule{}}%
% Dat: now we \advance\PexaWidth, but this won't affect #2, because
% advancement is inside a group
%\advance\PexaWidth-\wd0 \advance\PexaWidth-#1\relax
%\showthe\PexaWidth
\kern\baselineskip \kern-\topskip
\hbox{% implies \noindent
\kern\pexa@@savetabskip
\kern\PexaWidth \kern-\wd0 \kern-#1\relax
\@tempdima\dp1 \advance\@tempdima\ht1
\lower\dp1\hbox{\expandafter\pexa@@vrule\expandafter{\the\@tempdima}}%
%\pexa@@vrule
\box1% Dat: \box0 would emit a rule not tall enough
}%
\vss
}%
\pexa@@restore@prevdepth% let baselines align smoothly
\nobreak % disallow page break between Sample and Source
#2% \pexa@sh@..., which calls \pexa@show@halign etc.
% Dat: now \pexa@@cnta is -1 times nr of source lines printed
% vvv Dat: a little less than \baselineskip, because \vtop has less??
% Imp: even less
\advance\@tempdima\pexa@@cnta\baselineskip
% vvv Dat: use \kern, not \vskip, so \unskip won't undo it
\ifdim\@tempdima>\z@ \kern\@tempdima\fi% Sample is longer than Source
%%\message{Left=\pexa@@cnta}
}
%** Similar to \vskip#1\relax, but adds #1 to \lastskip
\def\PexaAddlastskip#1{%
\begingroup
% Imp: try \unpenalty somehow so \lastskip won't be 0pt after \vskip10pt\nobreak
\@tempskipa=#1\relax
\advance\@tempskipa\lastskip
\vskip-\lastskip
\vskip\@tempskipa
\endgroup% Dat: \lastskip survives
}
\def\pexa@default@vextravskip{\z@}
\def\pexa@default@vsmallht{1pt}
%** Like \pexa@sa@u, but works at a page break with baseline grid
%** \box1 already contains the Sample.
%** @param #1 desired Sample width
%** @param #2 one of \pexa@sh@...
\def\pexa@sa@v#1#2{%
%%\setbox1\hbox{\vrule\box1}%
%%\show\pexa@@tolinewidth \showthe\PexaWidth
%%\tracingcommands1 \tracingmacros1
\ifhmode\unskip\par\fi% go to vertical mode, keep \lastskip
%\show\pexa@default@vextravskip
\ifdim\prevdepth>-\@m\p@
\@tempdima\prevdepth \advance\@tempdima-\pexa@default@vextravskip\relax
\prevdepth\@tempdima
\vskip-\pexa@default@vextravskip\relax% !! \vspace etc.
\fi
\def\pexa@@cnta{0}%
%\@tempdima\dp1 \advance\@tempdima10.54352pt \dp1\@tempdima
\def\pexa@@thefirstline{}%
\setbox0\hbox{\pexa@@vrule{}}%
\@tempdimc\PexaWidth \advance\@tempdimc-\wd0 \advance\@tempdimc-#1\relax %\advance\linewidth\tabskip
\edef\pexa@@savetabskip{\the\@tempdimc\space}%
\def\pexa@@dohalign{%
\noalign\bgroup
%\pexa@@beforefirstline% called after the \cr of the preamble, should contain \noalign{...}
%\relax\pexa@setupverb@read% Dat: already called
% vvv Dat: \@@input is the original \input primitive, which we definitely
% need here (and not a macro)
\expandafter\pexa@inputfirstline\@@input\pexa@@cursourcename\space
% ^^^ Dat: \relax instead of \space would begin an extra line and demand
% an extra \cr (at end)
\egroup% terminate \halign
}%
\global\def\pexa@@vdepth{\z@}%
\global\let\pexa@@thefirstline\@empty
\def\pexa@@firstlinebeg{%
\setbox0=\hbox{\pexa@@thefirstline}% Source
\@tempdima\ht0
\advance\@tempdima\pexa@default@vextravskip\relax
\ifnum1<1%
\ifdim\ht1<\pexa@default@vsmallht\relax1% typical: \ht1 (Sample) is 0pt or 0.4pt
\else\ifdim\@tempdima<\ht1 1\fi\fi% Sample (\box1,\vtop) is a lot higher than Source.
\space
% Dat: now we raise Sample to the height of Source (should this be \strut??)
% Dat: in lb.sty: \ht0=7.14pt and \ht0=9.10pt
\advance\@tempdima-\ht1
% Dat: this example shows that \raise correctly shifts \ht and \dp
% \setbox0=\hbox{\vrule height 30pt depth50pt}
% \setbox0=\hbox{\raise6pt\box0}
% \showthe\ht0 \showthe\dp0
\setbox1\hbox{\raise\@tempdima\box1}%\raise10pt\box1}%
\fi
% vvv Dat: save new \dp1, as \raise{}d above
% vvv Dat: we need \global because we are in a \halign
\global\edef\pexa@@vdepth{\the\dp1}%
% Dat: ne don't need \@tempdima anymore
%%\vrule height\ht0 depth\dp0 width1pt
\vadjust{\kern\dp1 \hrule\@height\z@\vskip-\dp1 }% ensure that Sample fits page
\vtop to\z@{\hb@xt@\z@{\kern\pexa@@savetabskip
\@tempdima\dp1 \advance\@tempdima\ht1
\lower\dp1\hbox{\expandafter\pexa@@vrule\expandafter{\the\@tempdima}}%
\box1 \hss}\vss}% Dat: \hb@xt@\z@ is needed
% ^^^ Dat: \@totalleftmargin and \leftskip takes place here (as part of initial \tabskip)
\global\let\pexa@@thefirstline\@empty
}
%%\hrule
#2% \pexa@sh@..., which calls \pexa@show@halign etc.
\ifx\pexa@@undoyindent\@empty
\@tempdimc\z@
\else
\@tempdimc\@topsepadd
\fi
\ifdim\@tempdimc>\pexa@default@vextrabotdepth\relax
\@tempdimc\pexa@default@vextrabotdepth\relax
\fi
% Dat: now \@tempdimc is the extra Sample depth that can be tolerated.
% This can be quite much (>50pt etc.)
\@tempdima\pexa@@vdepth\relax% depth of the Sample
% Dat: now \pexa@@cnta is -1 times nr of source lines printed
\if1\pexa@default@baselinegrid
\advance\@tempdima\pexa@@cnta\baselineskip
\advance\@tempdima\baselineskip% don't count the first line
\ifdim\@tempdima<\@tempdimc % Source is tall enough, no \vskip needed
\@tempdima\z@
\else
\ifdim\@tempdima<256\baselineskip\else \advance\@tempdima-256\baselineskip\fi
\ifdim\@tempdima<128\baselineskip\else \advance\@tempdima-128\baselineskip\fi
\ifdim\@tempdima <64\baselineskip\else \advance\@tempdima -64\baselineskip\fi
\loop\ifdim\@tempdima>\@tempdimc \advance\@tempdima-\baselineskip\repeat
\@tempdima-\@tempdima
\advance\@tempdima\pexa@@vdepth\relax
\advance\@tempdima\pexa@@cnta\baselineskip% BUGFIX at Fri Apr 16 00:56:52 CEST 2004
\advance\@tempdima\baselineskip
\fi
% vvv Dat: this would force a better page break, but might be dangerous
%\ifx\pexa@@undoyindent\@empty\else
% \advance\@tempdima\@tempdimc
% \advance\@topsepadd-\@tempdimc
%\fi
\else
% This usually has no effect, except only with a single-line \vtop Sample
\advance\@tempdima\pexa@@cnta\baselineskip% negative
\advance\@tempdima\baselineskip% don't count the first line
\advance\@tempdima-\@tempdimc
\ifdim\@tempdima<\z@ \@tempdima\z@\fi
\fi
% vvv Dat: this \vskip will be extended by \addvspace
% vvv Dat: reset \lastskip to zero if \@tempdima=0pt
\ifdim\@tempdima<\z@\else \nobreak\vskip\@tempdima\fi% Sample is longer than Source
\global\let\pexa@@thefirstline\@empty
\global\let\pexa@@vdepth\@empty
%%\message{Left=\pexa@@cnta}
}
\begingroup\lccode`~=`\^^M\lowercase{\endgroup\def\pexa@inputfirstline#1~}{%
\global\def\pexa@@thefirstline{#1}%
% ^^^ Dat: \global is needed, because we're in \halign
\egroup% \noalign
#1\par% Put it back so it will be typeset
}
% ---
% Dat: superfluous macros
%\def\PexaShowSourceLeft {\PexaShowSource{left}}%
%\def\PexaShowSourceCenter {\PexaShowSource{center}}%
%\def\PexaShowSourceNumLeft{\PexaShowSource{leftnum}}%
%\def\PexaShowSourceNumCol {\PexaShowSource{leftnumcol}}%
%\def\PexaShowSourceNumHang{\PexaShowSource{leftnumhang}}%
%\def\PexaShowPexaMinipage {\PexaShowSample{\hsize}{P}}%
%\def\PexaShowSourceSampleLeft{\PexaShowBoth{#1}{l}{b}{v}{0}{1}{left}{2}}
%\def\PexaShowSourceSampleRight{\PexaShowBoth{#1}{r}{b}{v}{0}{1}{left}{2}}
%\def\PexaShowSourceSampleLeftPexaMinipage{\PexaShowBoth{#1}{l}{b}{p}{0}{1}{left}{2}}
%** Shows the source and the sample, facing, both left flushed, top baselines
%** aligned, disallowing page break, width of sample maximized so both source
%** and sample fit.
%** Deprecated. Use \PexaShowBoth with #1 \hsize-..., #6=0
%** @param #1 dimen: minimum width for the source (hint: specify 0pt)
%** Uses \pexa@@vrule
%** Imp: pre-calculate width of \pexa@@vrule
%** Imp: typeset the source once
%\def\PexaShowSourceSampleFit#1{%
% \vskip\z@skip
% \setbox0\vtop{\pexa@show@halign}%
% \ifdim\wd0<#1 \wd0=#1\fi
% \setbox1\vtop{%
% \advance\hsize-\wd0
% \setbox0\hbox{\pexa@@vrule{}}\advance\hsize-\wd0
% \input\pexa@@cursourcename\space
% }%
% \noindent\box0 \pexa@@vrule{}\relax\box1\par
%}
% --- \begin{PexaMinipage}
\let\pexa@@restore\empty
%** @param #1 something whose 1st token will be expanded once
\def\pexa@restore@appendex#1{%
\expandafter\expandafter\expandafter\def
\expandafter\expandafter\expandafter\pexa@@restore
\expandafter\expandafter\expandafter{%
\expandafter\pexa@@restore#1}%
}
\def\pexa@@equation{equation}
\def\pexa@@vrcnt{vrcnt}
%** @param #1 counter name; e.g `section' means \c@section
%** @param #2 true code
%** @param #2 false code
\def\pexa@ifignore#1#2#3{%
% Imp: multiple ignorable counters
\def\reserved@b{#1}%
\ifx\reserved@b\pexa@@equation#2%
\else\ifx\reserved@b\pexa@@vrcnt#2%
\else#3\fi\fi
}
%** Appends a counter restoration command to \reserved@a
%** @param #1 counter name; e.g `section' means \c@section
\def\pexa@elt#1{%
\pexa@ifignore{#1}{}{%
\edef\reserved@a{\noexpand\setcounter{#1}{\the\csname c@#1\endcsname}}%
\pexa@restore@appendex\reserved@a
}%
}
%** @param #1 counter name; e.g `section' means \c@section
\def\pexa@resetcounter#1{%
\pexa@ifignore{#1}{}{%
\expandafter\global\csname c@#1\endcsname\z@
}%
%\begingroup% superfluous
% \let\@elt\@stpelt
% \csname cl@#1\endcsname
%\endgroup
}
%\def\pexa@minipage@setcounter{% overrides latex.ltx
% \@ifundefined{c@#1}%
% {\@nocounterr{#1}}%
% {\pexa@elt{#1}\global\csname c@#1\endcsname#2\relax}}
\long\def\pexa@kill@minipagefalse#1\@minipagefalse#2\hfuzz${#1}
%** A dumb emulation of article.cls: displays the page footer.
\def\pexa@finishpage{%
\begingroup
\expandafter\pexa@kill@minipagefalse\endminipage\hfuzz$%
% ^^^ stop after footnotes at \@minipagefalse
\let\relax\relax% elminate possible \global before \@minipagefalse
\endgroup
\ifhmode\unskip\par\fi %\vskip\z@skip
\pexa@@saved@newpage
\ifhmode\unskip\par\fi %\vskip\z@skip
\unpenalty\unskip
\stepcounter{page}% 0 -> 1
\ifx\@oddfoot\@empty\else% \pagestyle{empty} -> \let\oddfoot\@empty
\bigskip
\begingroup
\if@specialpage
\global\@specialpagefalse\@nameuse{ps@\@specialstyle}% define \@evenfoot
\fi
\hbox to\hsize{\if@twoside\ifodd \@oddfoot\else \@evenfoot\fi\else\@evenfoot\fi}%
\endgroup
\fi
}
\def\pexa@newpage{%
\pexa@finishpage
\global\let\pexa@@finishlastpage\pexa@finishpage
\smallskip\hrule\smallskip
}
\def\pexa@everydisplayfirst#1{%
\everydisplay{#1}%
\abovedisplayshortskip\z@skip \abovedisplayskip\z@skip
#1%
}
%** \begin{PexaMinipage} is similar to \begin{minipage} (and accepts the same
%** args), but section etc.
%** counters (including \thepage) will restart, and their previous values are
%** restored at \end{PexaMinipage}. Also \mark and \@themark are restored.
%** Footnotes are numbered normally. The first paragraph is set with \noindent,
%** but subsequent ones are indented. Skips (including \belowdisplayskip) are
%** canceled at the bottom of the page. \abovedisplayskip above the very first
%** displayed formula is canceled; you can avoid this by saying \everydisplay{}
%** before the formula.
%** A space after \end{PexaMinipage} (as with minipage) is significant.
%**
%** Usage: \begin{PexaMinipage}[vert-alignment]{width}, just like the minipage
%** environment.
%**
%** Example:
%** \begin{PexaMinipage}{99pt}
%** \hrule\relax
%** \selectlanguage{english}
%** \section{mp-foo}
%** Aword\footnote{a hello, world}
%** Bword\footnote{b hello, world}
%** \end{PexaMinipage}
%** \hrule
\def\PexaMinipage{%
\begingroup
\let\pexa@@restore\@empty
\let\@elt\pexa@elt \cl@@ckpt % append `\setcounter{equation}{42}' to \pexa@@restore
\let\c@footnote\c@mpfootnote% don't reset original \c@footnote; BUGFIX at Tue Dec 23 18:46:30 CET 2003
\let\c@footnote@ch\c@mpfootnote% don't reset footnote generation counter -- for magyar.ldf
\let\@elt\pexa@resetcounter \cl@@ckpt
\pexa@restore@appendex{\expandafter\gdef\expandafter\@themark\expandafter{\@themark}}%
\edef\reserved@a{\noexpand\global\if@specialpage\noexpand\@specialpagetrue\else\noexpand\@specialpagefalse\fi}\pexa@restore@appendex\reserved@a
\if@specialpage\edef\reserved@a{\gdef\noexpand\@specialstyle{\@specialstyle}}\pexa@restore@appendex\reserved@a\fi
\expandafter\endgroup\expandafter\def\expandafter\pexa@@restore\expandafter{\pexa@@restore}%
%\show\pexa@@restore
% Dat: \selectlanguage is restored automatically
% Dat: \c@mpfootnote is reset to zero each time
%\let\c@footnote\c@mpfootnote
\def\thempfootnote{\thefootnote}% show normal footnotes (`1') instead of `a'
\let\c@mpfootnote\c@footnote
\let\cl@mpfootnote\cl@footnote% magyar.ldf footnote renumbering compatibility
\pexa@elt{secnumdepth}%
\let\pexa@@saved@newpage\newpage
\let\newpage\pexa@newpage% override
\let\finishpage\pexa@finishpage% new command
\let\pexa@@finishlastpage\@empty
\let\addtocontents\@gobbletwo
% ^^^ Don't modifty the TOC etc. of the host document. \addcontentsline isn't
% redefinied, because hyperref.pdf overrides the number of args
\expandafter\ifx\csname chapter\endcsname\relax
% Doesn't modify section numbering etc.
\let\chaptermark\@gobble
\let\p@chapter\@empty
\newcount\c@chapter%\newcounter{chapter}% \newcounter wouldn't allow redef
\def\chapter{\@startsection{chapter}{0}{\z@ }{-3.5ex \@plus -1ex \@minus -.2ex}{2.3ex \@plus .2ex}{\normalfont \Large \bfseries}}%
% ^^^ copied article.cls definition for section
\def\thechapter{\@Roman\c@chapter}%
\fi
%\aftergroup\pexa@@restore% no effect, because \pexa@@restore will have been changed back by \endgroup
% vvv Modify latex.ltx to avoid \parindent\z@
\def\@parboxrestore{%
\edef\reserved@a{\noexpand\@arrayparboxrestore\parindent\the\parindent\relax}%
\reserved@a \let\\\@normalcr}%
\def\@setminipage{%
\@minipagetrue
\everypar{%
{\setbox\z@\lastbox}% cancel \indent
\@minipagefalse\everypar{}%
}}%
\expandafter\everydisplay\expandafter{%
\expandafter\abovedisplayskip\expandafter\z@skip% for gridmath.sty
\expandafter\pexa@everydisplayfirst\expandafter{\the\everydisplay}}%
\@listdepth\z@ % Imp: put this into \PexaShowBoth etc.
\def\makelabel##1{%
\@latex@error{Lonely \string\item--perhaps a missing
list environment}\@ehc}%
% vvv with `Figure 1' (article)-style figure numbering
\def\figure{\pexa@mp@fakefloat{figure}}%
\let\endfigure\pexa@mp@endfloat
\def\table{\pexa@mp@fakefloat{table}}%
\@namedef{table*}{\table}\@namedef{endtable*}{\endtable}%
\@namedef{figure*}{\figure}\@namedef{endfigure*}{\endfigure}%
% ^^^ BUGFIX at Mon Apr 19 17:08:49 CEST 2004:
% need to redefine \endtable*, too; problem caused by \marginpar in a
% very different part of the document.
\let\endtable\pexa@mp@endfloat
\pexa@@minipage@setuphook
\minipage% accept args etc.
}
\def\endPexaMinipage{%
\pexa@@finishlastpage
\par\unskip% cancels \belowdisplay(short)skip and others
\unpenalty\unskip\unpenalty\unskip\unpenalty\unskip\unpenalty
% ^^^ Dat: `\unskip\unpenalty\unskip' cancels \bigskip
%
\let\c@mpfootnote\@tempcnta
\let\cl@footnote\@empty
\let\cl@mpfootnote\@empty
%\show\pexa@@restore
%\let\c@mpfootnote\c@secnumdepth% restoring of \cl@@ckpt will be overridden later
%\let\c@footnote\c@secnumdepth
%\showthe\count63
\pexa@@restore% will not reset original \c@footnote
%\global\c@footnote=77
%\setcounter{footnote}{77}
\expandafter\@temptokena\expandafter{\@themark}%
\mark{\the\@temptokena}% prevent double expansion of \@themark
\endminipage
}
\def\pexa@mp@fakefloat#1{\@ifnextchar[{\pexa@mp@begfloat{#1}}{\pexa@mp@begfloat{#1}[]}}
\def\pexa@mp@begfloat#1[#2]{%
\def\@captype{#1}% figure or table
% vvv ripped from \@xfloat in latex.ltx
%\global \setbox\@currbox
\vskip\intextsep
\color@vbox
\normalcolor
\vbox \bgroup
\hsize\columnwidth
\@parboxrestore
\@floatboxreset
}
\def\pexa@mp@endfloat{\@endfloatbox\vskip\intextsep}%
\let\pexa@@minipage@setuphook\@empty
\def\pexa@mp@article{%
\@twosidefalse
\pagestyle{plain}%
\renewcommand\thepart {\@Roman\c@part}%
\renewcommand\thesection {\@arabic\c@section}%
\renewcommand\thesubsection {\thesection.\@arabic\c@subsection}%
\renewcommand\thesubsubsection{\thesubsection .\@arabic\c@subsubsection}%
\renewcommand\theparagraph {\thesubsubsection.\@arabic\c@paragraph}%
\renewcommand\thesubparagraph {\theparagraph.\@arabic\c@subparagraph}%
}
% --- \PVerb et al.
%** \PVerb is a command that typesets its argument verbatim, in a typewriter
%** font. It similar to the LaTeX \verb command, but has additional features:
%** -- \PVerb{NESTED} is allowed (as well as \PVerb+TEXT+), where NESTED must
%** have braces properly nested, but no other constraints are given
%** -- the only constraint on TEXT in \PVerb+TEXT+ is tht it cannot contain
%** the delimiter (+)
%** -- \PVerb{NESTED} can be put inside macro command arguments, for example:
%** \fbox{\PVerb{\def\foo{\csname bar\endcsname}}}
%** -- accented characters (with \usepackage[...]{inputenc}) work properly
%** -- accents \H and \. work even in OT1 encoding (the font cmr is
%** substituted if necessary)
%** -- customizable behaviour via options pverb-space=, pverb-hyphenchar=,
%** pverb-verbatimfont=, pverb-linebreak=, pverb-linebreakchar=,
%** pverb-stretchshrink=
%** -- options can be specified as \PVerb[...] or \PexaDefaults{...}
%** Some downsides:
%** -- a newline inside the argument of \PVerb is converted to a space
%** -- inner mode: comments are lost
%** -- inner mode: line breaks are lost (converted to spaces)
%** -- inner mode: multiple space tokens are condensed into one
%** -- inner mode: exact layout of space tokens after \cs are lost
%** -- inner mode: only \PVerb{NESTED} syntax is allowed
%** -- inner mode: only \PVerb[pverb-hash=half] works inside \textrm
%** -- inner mode:
%** Dat: \verb~...~ will work well, because it is forced to be outer.
%** Suggested brace delimiters: {}
%** Suggested other \dospecial delimiters: \ $ & # ^ _ % ~
%** Suggested other delimiters: ` ! @ * - + = | : ; ' " < > , . / ? [] ()
%** Dat: test: \showhyphens{\PVerb{kismocsok}}
\DeclareRobustCommand\PVerb{}
\expandafter\def\csname PVerb \endcsname{%
\relax\ifmmode\hbox\else\leavevmode%\null prevents break of 1st word
\fi\bgroup
{\pexa@cverb@@verbatimfont}% load .fd files with undisturbed \catcodes
\pexa@setupverb% sets \catcodes, similar to `\let\do\@makeother \dospecial\@noligs \@vobeyspaces'
\pexa@cverb@catcodes
\afterassignment\pexa@cverb@maybeopts\let\reserved@a= %
}
%** Same as \PVerb, but converts `##' to `#'.
%** @example \textit{And type: \PVerbH{##ifdef}}
\DeclareRobustCommand\PVerbH{\PVerb[pverb-hash=half]}
%** Usage: \PVerbInner\PVerb{text} or \PVerbInner\PVerbH{text}
\def\PVerbInner#1#2{#1{#2}}
%** \item[\PVerb[pverb-space=visbreak]{foo}] doesn't work because of the nested
%** `['. Use this instead: \item[\PVerbOpt{pverb-space=visbreak}{foo}], or:
%** \item[{\PVerb[pverb-space=visbreak]{foo}}]
\DeclareRobustCommand\PVerbOpt{}
\expandafter\def\csname PVerbOpt \endcsname#1{%
\relax\ifmmode\hbox\else\leavevmode%\null prevents break of 1st word
\fi\bgroup
\pexa@doopts{#1}% in \begingroup, at last
{\pexa@cverb@@verbatimfont}% load .fd files with undisturbed \catcodes
\pexa@setupverb% sets \catcodes, similar to `\let\do\@makeother \dospecial\@noligs \@vobeyspaces'
\pexa@cverb@catcodes
\afterassignment\pexa@cverb@gottoken\let\reserved@a=
%\afterassignment\pexa@cverb@outerbrace\let\reserved@a= %
}
\def\pexa@cverb@catcodes{%
\let\do\pexa@cverb@makemathshift \dospecials \pexa@cverb@donormals
% ^^^ converts allowed delimiters to math-shift (\catcode 3)
%\@tempcnta127 \loop\ifnum\@tempcnta<256 \catcode\@tempcnta3 \advance\@tempcnta\@ne\repeat
% ^^^ also allows accented letters, such as \PVerb^^e1sz^^e1
\ifx\\\@tabularcr \catcode`\{1 \fi % is \realx with array.sty
\ifx\\\@arraycr \catcode`\{1 \fi % with array.sty
% ^^^ disable outerbrace mode for \begin{tabular}, because braces must be
% properly nested inside a \halign cell, so we are not allowed to swallow
% a brace as math-shift. Unfortunately, this doesn't fix the problem for
% pure \halign, for which `! Missing { inserted' will be shown.
}
% Sentinel sensible defaults -- overridden by \pexa@doopts above.
\def\pexa@cverb@@space{\ }% breakable
\def\pexa@cverb@@hyphenchar{\hyphenchar\font=-1 }% disallow auto-hyphenation of words
\def\pexa@cverb@@verbatimfont{\pexa@@verbatimfont}%
\def\pexa@cverb@@tbreak{\allowbreak}% allow silent line break
\def\pexa@cverb@@stretchshrink{}% keep original
%** Prepend a \do to every >=127 accented character.
%** Iteration terminated by \vfuzz.
%** Add \break statements if necessary
\def\pexa@cverb@addacc#1{%
\ifx\vfuzz#1\else
\ifnum`#1>126 \ifnum\catcode`#1=13 \noexpand\do\fi#1\else% prepend \do to accented character
\ifnum`#1=32 \noexpand\pexa@cverb@@space\else%\ifnum`#1<127
\ifnum\catcode`#1=11 #1\else
% vvv Dat: add \break to both sides of any nonletter
\noexpand\break#1\noexpand\break\fi
\fi\fi
\expandafter\pexa@cverb@addacc
\fi
}
\def\pexa@cverb@removespace@v#1 #2{%
#1\ifx\hfuzz#2\else
\ifnum\catcode\string`#2=11 \reserved@a\fi% keep space iff letter follows
#2\expandafter\pexa@cverb@removespace@v
\fi
}
%** Similar to \EempVerbatimDef5 in eempost.sty
%** Defines parameterless macro named #1 to expand to a verbatim
%** representation of token list #2, with only catcode 10 (space) and
%** catcode 12 (other).
%** -- `%' won't appear in the output
%** -- emits `\relax' as `\relax ', but `\<' as `\<' (without space)
%** -- comments etc. have already been removed
%** -- caller should end each line with `^^J%'
%** -- \cs containing non-letter chars are printed without caution
%** -- low (0..31) and high (127..256) chars will be emmited with ^^
%** -- char 10 (^^J) will be emitted as newline
%** -- ^^A (1) chars will be converted to spaces
%** -- spaces in #1 are kept with catcode 12 (other possibilities: keep with
%** catcode 10; remove)
%** -- trailing spaces of `\cs ' are
%** removed unless necessary (a letter follows it), keep with catcode 12
\long\def\pexa@cverb@vdef#1#2{% \long: allow \par in #2
\begingroup
\@tempcnta0 \loop\ifnum\@tempcnta<256 \lccode\@tempcnta0 \advance\@tempcnta\@ne\repeat
\lccode\string`\ =1
\lowercase{\toks@{#2}}% convert space to ^^A
\edef\reserved@a{\the\toks@}% convert `#' to `##' (catcode 6)
%\edef\reserved@b##1>{}% macro:...->...
\edef\reserved@b{\expandafter\strip@prefix\meaning\reserved@a\string##\hfuzz}%
% ^^^ Dat: \meaning expands to ^^A with catcode 12, because it's charcode isn't 32
% vvv !! SUXX, removes changes 'a\#b' to `a\b', too
\edef\reserved@b{\expandafter\pexa@removehash\reserved@b}% convert `##' to `#' (catcode 12)
\lccode\string`\ =0 % keep spaces generated by `\cs...'
\lccode1=\string`\ %
\expandafter\lowercase\expandafter{\expandafter\edef\expandafter\reserved@b\expandafter{\reserved@b\space\hfuzz}}% convert `^^A' -> ` ' (catcode 12)
% Dat: now we have the space tokens in #1 with catcode 12, and spaces at the
% end of multi-letter `\cs ' with catcode 10 (space).
\lccode`\-=\string`\ \lowercase{\edef\reserved@a{-}}% Dat: assume catcode('-')==12
\edef\reserved@b{\def\noexpand#1{\expandafter\pexa@cverb@removespace@v\reserved@b}}%
% ^^^ Dat: it is safe to call \eemp@removespace@v, because there will be
% no consecutive spaces in \reserved@b emitted by \meaning
\expandafter\endgroup\reserved@b
}
\def\pexa@swaprelax#1#2\relax{#2#1}
%\def\pexa@swap#1#2{#2#1}% SUXX, doesn't evaluate \else correctly
%** Cancel \break{}s in the beginning of \reserved@a, and also cancel break after
%** the very first character.
\def\pexa@cverb@skipbreak@ii#1#2{%
\ifx#1\break
\pexa@swaprelax{\pexa@cverb@skipbreak@ii#2}%
%\expandafter\pexa@cverb@skipbreak\expandafter#2%
\else
\ifx#2\break
\pexa@swaprelax{\pexa@cverb@skipbreakf@ii#1}%
\else
\pexa@swaprelax{#1#2}% Dat: don't insert \relax into `\do ^^f5' etc.
\fi%
\fi\relax
}
\def\pexa@cverb@skipbreakf@ii#1#2{%
\ifx#2\break
\pexa@swaprelax{\pexa@cverb@skipbreakf@ii#1}%
\else
\pexa@swaprelax{#1\relax#2}% Dat: \relax breaks ligatures
\fi\relax
}
%** Cancel \break{}s in the beginning of \reserved@a.
%** (formerly \pexa@cverb@eatbreaks)
\def\pexa@cverb@skipbreak@i#1{%
\ifx#1\break \expandafter\pexa@cverb@skipbreak@i
\else\expandafter#1\fi
}
%** Doesn't cancel \break.
\let\pexa@cverb@skipbreak@\@empty
%** Cancels break according to option pverb-leftbreakmin
\def\pexa@cverb@skipbreak{%
\relax% break ligatures
\csname pexa@cverb@skipbreak@\romannumeral\pexa@default@pverbleftbreakmin\endcsname
}
%** Cancel a single break in the beginning of \reserved@a.
%\def\pexa@cverb@skipbreak#1{%
% \ifx#1\break\else\expandafter#1\fi
%}
% Test.
%\def\pexa@default@pverbleftbreakmin{2}% see defaults below
%\edef\reserved@a{\pexa@cverb@skipbreak alma}
%\show\reserved@a
%\edef\reserved@a{\pexa@cverb@skipbreak\break\break alma}
%\show\reserved@a
%\tracingmacros1
%\edef\reserved@a{\pexa@cverb@skipbreak\break a\break\break l\break ma}
%\show\reserved@a
%\tracingmacros0 \zzzz
%** Typesets already verbatized contents of \reserved@a
%** @example \begingroup\makeatletter\pexa@cverb@vdef\reserved@a{#1}\pexa@cverb@typeset\endgroup
\def\pexa@cverb@typeset{%
\makeatother% make \@delfin@ablakban@ hyphenatable: \@ del-fin @ ab-lak-ban @
\edef\reserved@a{\expandafter\pexa@cverb@addacc\reserved@a\vfuzz\noexpand\@empty}%
\pexa@cverb@typeset@low
}
%** Also called by \pexa@nobackslash
\def\pexa@cverb@typeset@low{%
% ^^^ Dat: \@empty is for ##1 of a possible \break
%\showthe\hyphenchar\font
%%\show\reserved@a
\def\break##1{%
\ifx##1\@empty\else \ifx##1\pexa@cverb@@space\else% Dat: \ifx is slow
% ^^^ don't allow break before a space
% ^^^ ignore trailing break (followed by \@empty)
\pexa@cverb@@tbreak
\fi\fi
\ifx##1\break\else\expandafter##1\fi% gobble next token if it's \break
% ^^^ Dat: \break is a macro, so \ifx may be slow
% ^^^ Dat: we never ever have \break\break\break in \reserved@a
}%
% Imp: cancel \break if \pexa@cverb@@tbreak is \@empty
%** @param ##1 accented, \active char with catcode 12
\def\do##1{\lccode`~`##1\lowercase{~}}%
%\pexa@cverb@@verbatimfont
%\pexa@cverb@@hyphenchar
%\showthe\hyphenchar\font
% vvv Restore modified font values at \egroup
% vvv Dat: it would be too early to restore \hyphenchar at the end of the
% group, because \hyphenchar is examined by TeX when the paragraph has
% to be broken to lines.
% The only solution I can think of for changing \hyphenchar locally
% is defining a font with a very similar size (see below). Unfortunately,
% dvips(1) embeds two different fonts.
% \font\f=cmr10 at 10pt
% \font\g=cmr10 at 10.00001pt
% \hyphenchar\f=99
%\edef\reserved@b{\noexpand\pexa@aftergroup\noexpand\hyphenchar\the\font=\the\hyphenchar\font\relax\hfuzz}\reserved@b
\edef\reserved@b{\noexpand\pexa@aftergroup\noexpand\fontdimen3\the\font=\the\fontdimen3\font\relax\hfuzz}\reserved@b% normal stretch
\edef\reserved@b{\noexpand\pexa@aftergroup\noexpand\fontdimen4\the\font=\the\fontdimen4\font\relax\hfuzz}\reserved@b% normal shrink
%\show\pexa@cverb@@verbatimfont
%\showhyphens{irgumburgum id}%
\pexa@cverb@@verbatimfont
%\showhyphens{irgumburgum ie}%
\pexa@cverb@@hyphenchar
%\showhyphens{irgumburgum if}%
\pexa@cverb@@stretchshrink
%\showthe\hyphenchar\font
%\showhyphens{irgumburgum ig}%
%\showhyphens{\reserved@a}%
%\showhyphens{\tt\reserved@a}%
%\hyphenpenalty\z@
%\expandafter\MINUSCHECK\reserved@a......\hfuzz%
\expandafter\pexa@cverb@skipbreak\reserved@a\@empty\@empty% Dat: \@empty is sentinel
}
%\def\MINUSCHECK#1#2#3\hfuzz{%
% \edef\reserved@b{\meaning#1}\show\reserved@b
% \edef\reserved@b{\meaning#2}\show\reserved@b
% \edef\reserved@b{\meaning#3}\show\reserved@b
%}
%** Usage: \pexa@aftergroup TOKENS\hfuzz
\def\pexa@aftergroup#1{%
\ifx#1\hfuzz
\else\aftergroup#1\expandafter\pexa@aftergroup\fi
}
\def\pexa@cverb@donormals{\do`\do!\do @\do*\do-\do+\do=\do|\do:\do;\do'\do"\do,\do.\do/\do?\do<\do>\do(\do)\do[\do]}%
\def\pexa@cverb@makemathshift#1{\catcode`#13\relax}%
%\def\pexa@afterelse#1\else#2\fi{\fi#1}%
\def\pexa@cverb@maybeopts{%
\if\noexpand\reserved@a[%
%\catcode`]12
\egroup\bgroup% restore various catcodes
\expandafter\pexa@cverb@withopts
\else
\expandafter\pexa@cverb@gottoken
\fi
}%
\def\pexa@cverb@withopts#1]{%
\pexa@doopts{#1}% in \begingroup, at last
% vvv Dat: fonts already loaded
\pexa@setupverb% sets \catcodes, similar to `\let\do\@makeother \dospecial\@noligs \@vobeyspaces'
\pexa@cverb@catcodes
\afterassignment\pexa@cverb@gottoken\let\reserved@a= %
}
\def\pexa@cverb@mustbebrace#1{%
\PackageError{examplep}{\noexpand\PVerb inner delimiter must be brace,\MessageBreak not #1}\@ehc
\let\reserved@b\egroup
}
\def\pexa@cverb@mustntbe#1{%
\PackageError{examplep}{\noexpand\PVerb delimiter mustn't be #1}\@ehc
\let\reserved@b\egroup
}
%** Got token in \reserved@a
\def\pexa@cverb@gottoken{%
\pexa@cverb@@verbatimfont
% ^^^ do this before we do too many \catcode changes to load the .fd file.
\let\reserved@b\pexa@cverb@outer
\ifcat\noexpand\reserved@a$% math-shift
\if\noexpand\reserved@a$\else
\if\noexpand\reserved@a\space\pexa@cverb@mustntbe{space}\else
\if\noexpand\reserved@a\expandafter\@gobble\string\{\let\reserved@b\pexa@cverb@outerbrace
\fi\fi\fi
\else\ifcat\noexpand\reserved@a\expandafter{\iffalse}\fi% open-brace
\let\reserved@b\pexa@cverb@innerbrace
\else\ifcat\noexpand\reserved@a\relax
% Dat: the \cs token name has been lost, we only have the meaning of \reserved@a
\pexa@cverb@mustbebrace{backslash or control sequence or active char}%
\else\ifcat\noexpand\reserved@a a% letter
\pexa@cverb@mustntbe{a letter,\MessageBreak but got \meaning\reserved@a\space}%
% Dat: the outer `\PVerb x' would try to delimit by space, not `x'
% Dat: it is possible to get an outer letter: `\expandafter\PVerb\@empty x'
\else\ifcat\noexpand\reserved@a,% other
\pexa@cverb@mustbebrace{\meaning\reserved@a\space}%
% Dat: impossbile to skip to \reserved@a, because I cannot convert it back
% to a character token anymore
% Imp: write a slow loop
\else
\pexa@cverb@mustbebrace{\meaning\reserved@a\space(strange)}%
\let\reserved@b\egroup
%\let\reserved@b\pexa@cverb@inner
\fi\fi\fi\fi\fi
\reserved@b
}
% 1: begin-group character {
% 2: end-group character }
% 3: math shift character $
% 4: alignment tab character &
% 6: macro parameter character #
% 7: superscript character ^
% 8: subscript character _
% 10: "blank space "
% 11: the letter b
% 12: the character /
% 13: macro:..., undefined, \hbox etc.
% cs: macro:..., undefined, \hbox etc.
\def\pexa@meaning@beg#1 #2 #3{{1}{#3}}%
\def\pexa@meaning@end#1 #2 #3{{2}{#3}}%
\def\pexa@meaning@mat#1 #2 #3 #4{{3}{#4}}%
\def\pexa@meaning@ali#1 #2 #3 #4{{4}{#4}}%
\def\pexa@meaning@mac#1 #2 #3 #4{{6}{#4}}%
\def\pexa@meaning@sup#1 #2 #3{{7}{#3}}%
\def\pexa@meaning@sub#1 #2 #3{{8}{#3}}%
\def\pexa@meaning@bla#1 #2 #3 {{10}{\ }}%
\def\pexa@meaning@the#1 #2#3 #4{{\if#2l11\else12\fi}{#4}}%
\def\pexa@meaningiii#1#2#3{\csname pexa@meaning@#1#2#3\endcsname}%
%** @param #1 a catcode (positive)
%** @param #2 character token or `\ '
\def\pexa@cverb@makeeg#1#2#3\vfuzz{%
\ifnum#1<1 \@latex@error{Invalid character token}\@ehc\fi
%\catcode`#22 % \catcode 2 == end-group
\catcode`#213 % \catcode 13 == active
\lccode`~`#2\lowercase{\def\reserved@a##1~{\pexa@cverb@outerc{##1}}}%
}%
\def\pexa@cverb@innerbrace{%
\catcode`\{1 %begin-group
\catcode`\}2 %end-group
\catcode`\ =12
% ^^^ These \catcode changes will become useful when argument of \PVerb has
% only been partially seen by TeX's eyes, for example in:
% \expandafter\PVerb{foo}
\expandafter\pexa@cverb@innerc\expandafter{\iffalse}\fi% put back the extra open-brace
}
\def\pexa@cverb@vdef@fullhash#1{\pexa@cverb@vdef\reserved@a{#1}}%
\def\pexa@cverb@vdef@halfhash#1{%
\def\reserved@a{#1}% halves the hashes
\expandafter\pexa@cverb@vdef\expandafter\reserved@a\expandafter{\reserved@a}%
}
%** Takes an argument in braces.
\def\pexa@cverb@innerc#1{%
\makeatletter% keep space in `\csname @foo'
\ifnum\pexa@default@fullhash>0 \expandafter\pexa@cverb@vdef@fullhash
\else \expandafter\pexa@cverb@vdef@halfhash\fi
{#1}%
\pexa@cverb@typeset
\egroup
}
%** Doesn't work inside \halign :-(
\def\pexa@cverb@outerbrace{%
\catcode`\{1 %begin-group
\catcode`\}2 %end-group
\catcode`\ =12
\expandafter\pexa@cverb@outerc\expandafter{\iffalse}\fi% !! \halign
}
\def\pexa@cverb@outer{%
\catcode`\{12 %restore to other
\edef\reserved@b{\noexpand\pexa@cverb@makeeg\expandafter\pexa@meaningiii\meaning\reserved@a00\vfuzz}%
\reserved@b% equivalent to `\catcode\reserved@a=13 \def\reserved@a...'
\catcode`\ =12
\reserved@a
%\expandafter\pexa@cverb@outerc\expandafter{\iffalse}\fi
% ^^^ nice trick, but doesn't work inside a cell of \halign (! Missing { inserted)
% ^^^ why doesn't it work in \halign?? -- even the arg may contain open-brace
}
\begingroup\lccode\string`\+=\string`\#\lowercase{\toks@{%
%** `\pexa@removehash foo#Xbar#Yand#\hfuzz' expands to `fooXbarYand', if
%** # has catcode 12.
\def\pexa@noremovehash#1+\hfuzz{#1}%
\def\pexa@removehash#1+#2{#1\ifx\hfuzz#2\else#2\expandafter\pexa@removehash\fi}%
}}\expandafter\endgroup\the\toks@
\def\pexa@cverb@outerc#1{%
% Dat: #1 might contain begin-group and end-group tokens. Change them to other.
% vvv Dat: setting \lccode`a=0 will prevent \showhyphens from working
\@tempcnta0 \loop\ifnum\@tempcnta<256 \ifnum\lccode\@tempcnta=\@tempcnta\else \lccode\@tempcnta\z@\fi \advance\@tempcnta\@ne\repeat
\lccode`\ =1
%%\lccode`\ =32 \showhyphens{csukafogta b}%
\lowercase{\def\reserved@a{#1}}% don't convert `#' to `##' (catcode 6)
% ^^^ change space to '\001', so \meaning won't convert it to catcode 10
% Dat: don't expand \reserved@a now, because it might contain high accented tokens
\edef\reserved@b##1>{}% macro:...->...
\edef\reserved@b{\expandafter\reserved@b\meaning\reserved@a}%
\lccode\string`\ =0 % keep spaces generated by `\cs...'
\lccode1=\string`\ %
\ifnum\pexa@default@fullhash=0 % convert `##' to `#'
\edef\reserved@b{\expandafter\expandafter\expandafter\pexa@removehash\expandafter\reserved@b\string##\hfuzz}%
\fi
\expandafter\lowercase\expandafter{\expandafter\def\expandafter\reserved@b\expandafter{\reserved@b}}%
% ^^^ change '\001' back to space
%%\show\reserved@a
\let\reserved@a\reserved@b \pexa@cverb@typeset
\egroup
}
%** Dat: `\ X' doesn't work, the space will be gobbled :-(
%** Dat: a space will be forced after `\W ' if W is a word
\begingroup\lccode\string`*\string`\\\lowercase{\endgroup
\def\pexa@cverb@nobackslash@lowa#1*\break#2}{%
% ^^^ Dat: \break is the \break following the backslash
#1\ifx#2\hfuzz\else
\ifx#2\break
\expandafter\expandafter\expandafter\pexa@cverb@nobackslash@more
\else
\if#2V\noexpand\char32\relax% visible, unbreakable
\else\if#2S\noexpand\pexa@cverb@@space% default space
\else\if#2B\noexpand\PexaAllowBreak
\else\if#2n\noexpand\hfil\noexpand\break
\else\noexpand#2\fi\fi\fi\fi% Dat: #2 is usually the \break preceding a non-letter char
\expandafter\expandafter\expandafter\pexa@cverb@nobackslash@lowa
\fi
\fi
}
\edef\pexa@cverb@nobackslash@more{\noexpand\pexa@cverb@nobackslash@lowa
\expandafter\@gobble\string\\\noexpand\break}%
\def\pexa@cverb@removespace@vv#1 #2{%
#1\ifx\hfuzz#2\else
#2\expandafter\pexa@cverb@removespace@vv
\fi
}
\long\def\pexa@cverb@nobackslash#1{%
\begingroup
% vvv remove all spaces emitted by \meaning. Fine but ugly.
\let\pexa@cverb@removespace@v\pexa@cverb@removespace@vv
\let\pexa@removehash\pexa@noremovehash% don't remove \#. Ugly hack.
\pexa@cverb@vdef\reserved@a{#1}%
%\show\reserved@a
%\expandafter\expandafter\expandafter\show\expandafter\@gobble\reserved@a
\makeatother% make \@delfin@ablakban@ hyphenatable: \@ del-fin @ ab-lak-ban @
\edef\reserved@a{\expandafter\pexa@cverb@addacc\reserved@a\vfuzz
\noexpand\@empty\expandafter\@gobble\string\\\noexpand\break}%
% Dat: expandable constructs emitted by \pexa@cverb@addacc:
% \do(unsave OK) \break \pexa@cverb@@space
\let\pexa@@save@pcs\pexa@cverb@@space
\let\pexa@@save@break\break
\let\pexa@cverb@@space\relax
\let\do\relax
\let\break\relax
\edef\reserved@a{\expandafter\pexa@cverb@nobackslash@lowa\reserved@a\hfuzz}%
\let\pexa@cverb@@space\pexa@@save@pcs
\let\break\pexa@@save@break
\pexa@cverb@typeset@low
\endgroup
}
% --- One-character verbatim environments
%
% !! translate this Hungarian text to English.
%
% -- A kis-verbatim \verb+...+ helyett \'irhat\'o az, hogy ^^f7...^^f7
% (az italic correction az\'ert kell el\'e, hogy ha parancs defin\'ici\'okn\'al
% italic-kal \'irunk egy opcion\'alis param\'etert, ne kelljen ut\'ana k\'ezzel
% korrig\'alni.) Mostm\'ar sorv\'ege jel is lehet benne, mert \PVerb-et haszn\'al
% (sorv\'ege==sz\'ok\"oz), de ha a k\"ovetkez\H{o} sor sz\'ok\"ozzel kezd\H{o}dik, akkor t\"obb
% sz\'ok\"oz lesz. Haszn\'alhat\'o \section-ben is, \'es (\'ovatosan) tabular-ban is,
% ha minden oszlop-ban a brace-ek balance-ol\'odnak. Lehet benne \'ekezetes
% bet\H{u}.
%
% Legjobb emacsban azt \'irni, hogy
% sz\"oveg.....
% %%%
% ^^f7aaa aaa aaa^^f7 sz\"oveg folytat\'asa ...
% mert akkor a comment miatt nem t\"ori el a verbatimos sz\"oveget.
%
% -- \^^f7...^^f7 olyan, mint a ^^f7...^^f7, de minden speci\'alis karakter el\'e backslash
% kell. P\'eld\'aul: \^^f7\{\}\%\\^^f7. Ily m\'odon k\"onnyebben adhat\'o
% makr\'o-argumentumnak. \^^f7\V^^f7 egy l\'athat\'o sz\'ok\"ozt sz\'ur be, \^^f7\B^^f7
% \PexaAllowBreak-et (kis jellel sort\"or\'est enged\'elyez), \^^f7\S^^f7 ugyanaz,
% mint ^^f7 ^^f7. Ha minden el\'e gondosan kirakjuk a
% backslash-t, akkor haszn\'alhat\'o \section-ben is.
%
% -- \Q{...} \'es \Q. olyan, mint \^^f7...^^f7. Teh\'at l\'athat\'o sz\'ok\"oz: \Q\V
%
% -- !! ^^f7#^^f7 nem megy, de \Q\^^f7 igen
%
\begingroup \catcode`^^f7=13 \@firstofone{\endgroup
\def\pexa@div@setcodes{\catcode`^^f7=13 % /divide-sign
\lccode`^^d7=0 \uccode`^^d7=0 % /multiply-sign isn't a lower-upper case variant (\OE?)
\lccode`^^f7=0 \uccode`^^f7=0 }
%** Can be used in \section (as ``inner'' \PVerb), with limitations.
%** !! parameters, as with ^^f7#^^f7
\def\pexa@div{% Dat: not \long. File. ^^f7
\ifx\protect\@typeset@protect
\expandafter\pexa@overb@low
\else
\noexpand\pexa@div
%\expandafter\pexa@overb@ignore doesn't work :-((
\fi
}
%** Works in math mode, too. What about robustness?
\def\pexa@overb@low{% ASCII 247
% Dat: would be too late for \catcode of `\PVerb^^f7' here
% Imp: check for innerness-outerness
\relax\ifmmode\hbox\else\leavevmode\/\fi
\bgroup
%\pexa@doopts{#1}% in \begingroup, at last
{\pexa@cverb@@verbatimfont}% load .fd files with undisturbed \catcodes
\pexa@setupverb
\pexa@cverb@catcodes
\catcode\string`\{12 % restore to other
\catcode\string`\ 12
\catcode`^^f7=13
\def\reserved@a##1^^f7{% Dat: define with current \catcode`^^f7
%\showthe\catcode`-% 3 (math-shift)
\pexa@cverb@outerc{##1}}% defined in examplep.sty
\reserved@a
%\expandafter\pexa@cverb@outerc\expandafter{\iffalse}\fi
% ^^^ nice trick, but doesn't work inside a cell of \halign (! Missing { inserted)
% ^^^ why doesn't it work in \halign?? -- even the arg may contain open-brace
}
\def\pexa@nomath{\relax\ifmmode\hbox\else\leavevmode\/\fi}
%** Dat: we need \long for index generation of \Q{\par}
\long\def\pexa@Q#1{\pexa@bsdiv#1^^f7}% \Q
\long\def\pexa@bsdiv#1^^f7{% \^^f7
% An evil #1 may contain \fi here, so we have to be very careful.
\ifx\protect\@typeset@protect
\expandafter\@gobble\fi\@thirdofthree\@firstoftwo
\pexa@nomath\pexa@overb@noe@a
{\pexa@cverb@nobackslash{#1}}%
%\ifx\protect\@typeset@protect \pexa@nomath{\pexa@cverb@nobackslash{#1}}%
%%\else \noexpand\^^f7#1\noexpand^^f7\fi % Undefined control sequence \V
%%\else \BackslashDivideIsFragile \fi
%\else \noexpand\^^f7\expandafter\pexa@overb@noexpand#1^^f7\fi
}%
\long\def\pexa@overb@noe@a#1{\pexa@overb@noe@b#1}%
\long\def\pexa@overb@noe@b\pexa@cverb@nobackslash#1{%
\noexpand\^^f7\expandafter\pexa@overb@noexpand#1^^f7}
\long\def\pexa@overb@noexpand#1{%
\noexpand#1%
\ifx#1^^f7\else\expandafter\pexa@overb@noexpand\fi
}
\def\pexa@activate@Q{\let\Q\pexa@Q}
\def\pexa@activate@bsdiv{\pexa@div@setcodes \let\^^f7\pexa@bsdiv}
\def\pexa@activate@div {\pexa@div@setcodes \let^^f7\pexa@div}
\def\pexa@activate@url {\def\url{\PVerbOpt{}}}
}% ^^f7 has catcode 13
% ---
%** Apply default options.
\pexa@doopts{%
samplewidth=.5\PexaWidth,xalign=l,yalign=u,boxstyle=p,
allowshrink=yes,allowbreak=yes,srcstyle=left,usewidth=skipwidth,
xindent=none,yindent=none,source-space=invfixbreak,firstlinenum=1,
pexaminipage-setuphook={},addvspace-top=\addvspace,
addvspace-bottom={\vskip\z@skip\addvspace},% don't accumulate Sample>Source \vskip
vextravskip=\z@,vsmallht=1pt,
linenumbersep={},linenumberformat={{\normalfont\rmfamily\scriptsize\number-\pexa@@cntb}\pexa@default@linenumbersep},
pverb-space=invbreak,pverb-hyphenchar=hyphen,pverb-verbatimfont=pexavf,
pverb-linebreak=char,pverb-linebreakchar={$\lnot$},pverb-stretchshrink=yes,
pverb-hash=full,psource-verbatimfont=pexavf,baseline-grid=no,
vextrabotdepth=\z@,pverb-leftbreakmin=2,mp-equation-reset=yes,
mp-varioref-reset=no,Q=unchanged,bsdiv=unchanged,div=unchanged,url=unchanged,
source-par-align=left,
}
% Dat: inlineprefix= is missing.
\AtEndOfPackage{\let\@unprocessedoptions\relax}
\expandafter\ifx\csname opt@\@currname.\@currext\endcsname\relax\else
\expandafter\expandafter\expandafter\pexa@doopts
\expandafter\expandafter\expandafter{%
\csname opt@\@currname.\@currext\endcsname}\fi
%\edef\reserved@a{\noexpand\pexa@doopts{\@ptionlist{\@currname.\@currext}}}%
%\reserved@a
\pexa@@restorecat \let\pexa@@restorecat\@undefined
\endinput% examplep.sty