%% start of file `moderncvskillmatrix.sty'.
%% Copyright 2021 David Seus (cryptointerest@posteo.de).
%
% This package provides a skill matrix template for the moderncv package.
% Some recruiting firms require applicants to rate their skills, computer
% skills, management tools, or similar in a table involving a graphical
% illustration of their skill level. This package implements this idea
% and provides the following commands to use within the moderncv
% package:
%
%
% PUBLIC COMMANDS
% \cvskill{<1-5>}
% Illustrate skill level with little colored boxes.
% By default five skill levels are predefined.
%
% Input:
% input_1: integer between 0 and 5
%
% Example usages:
% \cvskill{3}
%
%
% \cvskilllegend[*][<post_padding>][<first_level>][<second_level>][<third_level>][<fourth_level>][<fifth_level>]{<name>}
% Print legend table explaining the meaning of \cvskill{1}...\cvskill{5}.
%
% Input:
% asterix (optional): include vertical (dashed) lines. This behaviour depends on the body style.
% For the fancy style, the asterix has no meaning.
% input_1 (optional): padding length appended to the legend, default: <0.25em>
% input_2 (optional): string describing meaning of \cvskill{1}, default: <basic knowledge>
% input_3 (optional): string describing meaning of \cvskill{2}, default: <intermediate knowledge with some project experience>
% input_4 (optional): string describing meaning of \cvskill{3}, default: <extensive project experience>
% input_5 (optional): string describing meaning of \cvskill{4}, default: <deepened expert knowledge>
% input_6 (optional): string describing meaning of \cvskill{5}, default: <expert/guru>
% input_7: string giving a name to the legend, default: <>
%
% Example usages:
% \cvskilllegend{} print default legend
% \cvskilllegend[0.5em]{Legend} print default legend, but adjust post padding and display the word ``Legend''.
% \cvskilllegend*[0.2em][Grundkenntnisse][Grundkenntnisse und eigene Erfahrung in Projekten][Umfangreiche Erfahrung in Projekten][Vertiefte Expertenkenntnisse][Experte/Guru]{Legende} Fully adjust legend to German example and including dashed lines
%
% Note:
% -The width of the columns can be adjusted by the \setcvskilllegendcolumns, see \setcvskilllegendcolumns
% -The design of the table is such that the <second_level> entry stands in the first column but
% occupies rows two and three. This has been done to accomodate english and german defaults.
% An alternative is provided by \cvskillplainlegend
%
%
% \cvskillplainlegend[*][<post_padding>][<first_level>][<second_level>][<third_level>][<fourth_level>][<fifth_level>]{<name>}
% Print alternative legend table explaining the meaning of \cvskill{1}...\cvskill{5}.
% In this legend, the first three skill levels are in one column
%
% Input:
% asterix (optional): include vertical (dashed) lines. This behaviour depends on the body style.
% For the fancy style, the asterix has no meaning.
% input_1 (optional): padding length appended to the legend, default: <0.25em>
% input_2 (optional): string describing meaning of \cvskill{1}, default: <basic knowledge>
% input_3 (optional): string describing meaning of \cvskill{2}, default: <intermediate knowledge with some project experience>
% input_4 (optional): string describing meaning of \cvskill{3}, default: <extensive project experience>
% input_5 (optional): string describing meaning of \cvskill{4}, default: <deepened expert knowledge>
% input_6 (optional): string describing meaning of \cvskill{5}, default: <expert/guru>
% input_7: string giving a name to the legend, default: <>
%
% Example usages:
% \cvskillplainlegend{} print default legend
% \cvskillplainlegend[0.5em]{Legend} print default legend, but adjust post padding and display the word ``Legend''.
% \cvskillplainlegend*[0.2em][Grundkenntnisse][Grundkenntnisse und eigene Erfahrung in Projekten][Umfangreiche Erfahrung in Projekten][Vertiefte Expertenkenntnisse][Experte/Guru]{Legende} Fully adjust legend to German example and including dashed lines
%
% Note:
% -The width of the columns can be adjusted by the \setcvskilllegendcolumns, see \setcvskilllegendcolumns
%
%
% \cvskillhead[<post_padding>][<Level>][<Skill>][<Years>][<Comment>]%
% add skill matrix line acting as header explaining the meaning of columns.
%
% Input:
% input_1 (optional): padding length appended to the legend, default: <0.25em>
% input_2 (optional): string naming the level column (2nd column), default: <Level>
% input_3 (optional): string naming the skill column (3nd column), default: <Skill>
% input_4 (optional): string naming the experience-in-years column (4th column), default: <Years>
% input_5 (optional): string naming the comment column (5th column), default: <Comment>
%
% Example usages:
% \cvskillhead print default head.
% \cvskillhead[0.5em] print default head, but adjust post padding.
% \cvskillhead[0.25em][Level][F\"ahigkeit][Jahre][Bemerkung] Fully adjust head to German example
%
% Note:
% - The width of the columns can be adjusted by the \setcvskillcolumns command, see \setcvskillcolumns.
%
%
% \cvskillentry[*][<post_padding>]{<skill_cathegory>}{<0-5>}{<skill_name>}{<years_of_experience>}{<comment>}%
% add cvskill matrix row.
%
% Input:
% asterix (optional): include horizontal (dashed) line above the entered line. This behaviour depends on the body style.
% For the fancy style, the asterix has no meaning.
% input_1 (optional): padding length appended to the legend, default: <0.25em>
% input_2: string, naming skill cathegory, default: <>
% input_3: integer between 0 and 5, describing level of skill. \cvskill{input_2} is called internally, default: <>
% input_4: string, naming the skill, default: <>
% input_5: positive real number, stating the number of years of experience with this skill , default: <>
% input_6: string, explaining details w.r.t. that particual skill default: <>
%
% Example usages:
% \cvskillentry*{Language:}{3}{Python}{2}{I have done a million projects with Python}
% \cvskillentry{}{2}{Lilypond}{14}{So much sheet music! Man I'm the best!}
% \cvskillentry{}{3}{\LaTeX}{14}{Clearly I rock at \LaTeX}
% \cvskillentry*[1.5em]{OS:}{3}{Linux}{2}{I only use Archlinux}
%
% Note:
% - The width of the columns can be adjusted by the \setcvskillcolumns command, see \setcvskillcolumns.
%
%
% \setcvskillcolumns[<width>][<factor>][<exp_width>]
% adjust column width of skill table
%
% The \cvskillentry command comes with default FIXED width definitions of the kill matrix for the columns
% based on the author's own skill matrix. This is necessary to ensure that the entries are nicely aligned
% and actually yield a decent looking table. The defaults depend on the style used and are chosen reasonably.
% However, depending on the user input and the style that is used some of the columns might need adjustments.
% The \setcvskillcolumns command provides means to influence the width of the first, the third and the fourth
% skill matrix column. The second column containg the output of \cvskill remains fixed width. The last column,
% the comment column gets recalculated according to the setting of the other columns.
%
% Input
% Input_1 (optional): width smaller than \textwidth, default <\skillmatrix@hintscolumnwidth>
% Input_2 (optional): float between 0 and 1 adjusting how much percent of the table width without
% the first column is used columns two, three and four. Through this parameter
% the width of the 3rd column (skill name) can be adjusted, default <\skillmatrix@columnwidth>
% Input_3 (optional): width smaller than \textwidth, setting the width of the 4th column
% (Years of experience), default <\cvskill@experiencewidth>
%
% Example usage
% \setcvskillcolumns[5em][][]% adjust first column. Same as \setcvskillcolumns[5em]
% \setcvskillcolumns[][0.45][]% adjust third (skill) column. Same as \setcvskillcolumns[][0.45]
% \setcvskillcolumns[][][\widthof{``Year''}]% adjust fourth (years) column.
% \setcvskillcolumns[\widthof{``Language''}][0.48][]% adjust 1st and 3rd columns. Same as \setcvskillcolumns[\widthof{``Language''}][0.45]
% \setcvskillcolumns[\widthof{``Management Tools''}][0.6][3em]% ajust all at once.
%
% Note
% - For the styles 'classic' and 'casual' the first column is set to hintscolumnwidth such that
% it aligns with the rest of the entries. A readjustment of the first column should therefor
% be avoided. It is recomended to only use \setcvskillcolumns in the form of
% \setcvskillcolumns[][<factor>][<width>], thereby leaving the defaults in place for the first column.
%
%
% \setcvskilllegendcolumns[<width>][<factor>]
% adjust column width of legend
%
% The \cvskilllegend command comes with default FIXED width definitions for the columns of the legend matrix
% such that the default english and german examples look good.
% However, depending on the user input (translation) and the style that is used some adjustment might be needed.
% The \setcvskilllegendcolumns command provides means to influence all columns except the ones containing
% \cvskill commands. The second column containg the output of \cvskill remains fixed width. The last column,
% the comment column gets recalculated according to the setting of the other columns.
%
% Input
% Input_1 (optional): length smaller than \textwidth influencing the width of the first column
% where depending on the style the legend_string gets printed. In case the
% string is left empty adjusting this width allows moving the legend horizontally.
% Default <\skilllegend@hintscolumnwidth>
% Input_2 (optional): float between 0 and 1 influencing the width of the left legend descritor column,
% aka \cvskilllegend@leftdescriptorwidth. The desriptor column on the right,
% \cvskilllegend@rightdescriptorwidth is influenced by the factor 1-<factor>.
% Default <\skilllegend@leftdesriptorfactor>
%
% Example usage
% \setcvskilllegendcolumns[][0.45]%% adjust left desriptor column.
% \setcvskilllegendcolumns[\widthof{``Legend''}][0.45]% adjust both left descriptor column and string column
%
% Note
% - Due to implementation of \cvskilllegend for style 'fancy' (moderncvbodyv)
% the first optional variable has no effect in this case.
% - For the styles 'classic' and 'casual' the first column is set to hintscolumnwidth such that
% it aligns with the rest of the entries. A readjustment of the first column should therefor
% be avoided. It is recomended to only use \cvskilllegend in the form of
% \cvskilllegend[][<factor>], thereby leaving the defaults in place for the first column.
% - For style 'banking' the first column is set to align with the rest of the \cvskillentry entries
% Therefor adjusting the first column can be used to widen the table while moving it around. If no
% legend string is used, setting \cvskilllegend[0em] maximises the real enstate for the legend.
%
%
% PRIVATE COMMANDS
%
% \recompute@cvskillmatrix@lengths
% compute all lengths necessary for the skill matrix depending on
% the moderncv style (moderncvbody)
%
% Input: none
%
% Example usage (only internally in moderncvbody<i-v>.sty)
% \recompute@cvskillmatrix@lengths
%
%
% This work may be distributed and/or modified under the
% conditions of the LaTeX Project Public License version 1.3c,
% available at http://www.latex-project.org/lppl/.
%-------------------------------------------------------------------------------
% identification
%-------------------------------------------------------------------------------
\NeedsTeXFormat{LaTeX2e}
\ProvidesPackage{moderncvskillmatrix}[2024-07-18 v2.4.1 modern curriculum vitae and letter skill matrix]
% The definitions need to be adjusted depending on which moderncvbody<i-v>.sty style is usde.
% body type options: "moderncvbodyi" (default), "moderncvbodyii", "moderncvbodyiii", "moderncvbodyiv" or "moderncvbodyv"
\@initializeif{\if@moderncvbodyi}\@moderncvbodyifalse
\DeclareOption{moderncvbodyi}{\@moderncvbodyitrue\@moderncvbodyiifalse\@moderncvbodyiiifalse\@moderncvbodyivfalse\@moderncvbodyvfalse}
\@initializeif{\if@moderncvbodyii}\@moderncvbodyiifalse % this option is added in case moderncvbodyii gets implemented standalone
\DeclareOption{moderncvbodyii}{\@moderncvbodyifalse\@moderncvbodyiitrue\@moderncvbodyiiifalse\@moderncvbodyivfalse\@moderncvbodyvfalse}
\@initializeif{\if@moderncvbodyiii}\@moderncvbodyiiifalse
\DeclareOption{moderncvbodyiii}{\@moderncvbodyifalse\@moderncvbodyiifalse\@moderncvbodyiiitrue\@moderncvbodyivfalse\@moderncvbodyvfalse}
\@initializeif{\if@moderncvbodyiv}\@moderncvbodyivfalse
\DeclareOption{moderncvbodyiv}{\@moderncvbodyifalse\@moderncvbodyiifalse\@moderncvbodyiiifalse\@moderncvbodyivtrue\@moderncvbodyvfalse}
\@initializeif{\if@moderncvbodyv}\@moderncvbodyvfalse
\DeclareOption{moderncvbodyv}{\@moderncvbodyifalse\@moderncvbodyiifalse\@moderncvbodyiiifalse\@moderncvbodyivfalse\@moderncvbodyvtrue}
% If option `circle` is specified, use circles instead of small rectangles for rating skills
\@initializeif{\if@cvskillcircle}\@cvskillcirclefalse
\DeclareOption{circle}{\@cvskillcircletrue}
\DeclareOption*{}% avoid choking on unknown options
\ExecuteOptions{moderncvbodyi}
\ProcessOptions*\relax% \ProcessOptions* processes the options in the order provided (i.e., with the later ones possibly overriding the former ones), while \ProcessOptions processes them in the order of the package
%-------------------------------------------------------------------------------
% required packages
%-------------------------------------------------------------------------------
\RequirePackage{tikz}
\RequirePackage{multirow}
% package arydshln is needed for the dashed lines but is incompatible with fancy style
\if@moderncvbodyv%
% \RequirePackage{arydshln} % incompatible with fancy style
\else%
\RequirePackage{arydshln} % incompatible with fancy style
\fi
% %-------------------------------------------------------------------------------
% % \cvskill command
% %-------------------------------------------------------------------------------
% The code for the Skilllevel illustration with the little boxes.
% This is idea stolen from the limecv package, see https://github.com/opieters/limecv.git
\@initializelength{\cvSkill@ShapeSize}
\if@cvskillcircle%
\setlength{\cvSkill@ShapeSize}{.7ex}%
\def\cvSkill@Shape#1{\tikz\filldraw[#1] (0, 0) circle (\cvSkill@ShapeSize);}
\else
\setlength{\cvSkill@ShapeSize}{1.2ex}
\def\cvSkill@Shape#1{\tikz\filldraw[#1] (0, 0) rectangle (\cvSkill@ShapeSize, \cvSkill@ShapeSize);}
\fi
\newcount\my@repeat@count
\DeclareDocumentCommand{\cvskill}{m}{%
% Illustrate skill level with little colored boxes.
% By default five skill levels are predefined.
%
% Input:
% integer between 0 and 5
% Example usage:
% \cvskill{3}
\begingroup
\my@repeat@count=\z@
\@whilenum\my@repeat@count<#1\do{\cvSkill@Shape{skillmatrixfullcolor}\advance%
\my@repeat@count\@ne\,}%
\my@repeat@count=\numexpr5-\z@\relax
\@whilenum\my@repeat@count>#1\do{\cvSkill@Shape{skillmatrixemptycolor}\advance%
\my@repeat@count\m@ne\,}%
\endgroup
}% end \cvskill
% %-------------------------------------------------------------------------------
% % \recompute@cvskillmatrix@lengths
% %-------------------------------------------------------------------------------
% initialise lengths needed for the skillmatrix
\@initializelength{\cvskill@width}
\@initializelength{\cvskill@descriptorwidth}
\@initializelength{\cvskill@experiencewidth}
\@initializelength{\skillmatrix@columnwidth}
\@initializelength{\skillmatrix@commentwidth}
\@initializelength{\skillmatrix@padding}
\@initializelength{\skillmatrix@hintscolumnwidth}
\@initializelength{\skillmatrix@bodylength}
\@initializelength{\cvskilllegend@leftdescriptorwidth}
\@initializelength{\cvskilllegend@rightdescriptorwidth}
\@initializelength{\skilllegend@hintscolumnwidth}
\@initializelength{\skilllegend@padding}
\@initializelength{\skilllegend@bodylength}
% \separatorrulewidth is defined in moderncvbodyv.sty and we need to
% define it to not throw an error in the other cases
\if@moderncvbodyv%
%
\else%
\@initializelength{\separatorrulewidth}
\setlength{\separatorrulewidth}{1ex}
\fi
\DeclareDocumentCommand{\skilllegend@leftdesriptorfactor}{}{}%
%% DEFINITION \recompute@cvskillmatrix@lengths
% declare the command \recompute@cvskillmatrix@lengths empty
\DeclareDocumentCommand{\recompute@cvskillmatrix@lengths}{}{}%
% compute all lengths necessary for the skill matrix depending on
% the moderncv style (moderncvbody)
%
% Input: none
%
% Example usage (only internally in moderncvbody<i-v>.sty)
% \recompute@cvskillmatrix@lengths
% Definition of \recompute@cvskillmatrix@lengths for moderncvbodyi
\if@moderncvbodyi%
\RenewDocumentCommand{\recompute@cvskillmatrix@lengths}{}{%
\setlength{\skillmatrix@padding}{1ex}%
\setlength{\skillmatrix@hintscolumnwidth}{\hintscolumnwidth}%
\setlength{\cvskill@width}{\widthof{\cvskill{5}}}%
\setlength{\cvskill@experiencewidth}{\widthof{``Year''}}%
\setlength{\skillmatrix@bodylength}{\maincolumnwidth}%
\setlength{\skillmatrix@columnwidth}{0.45\skillmatrix@bodylength}%
\setlength{\cvskill@descriptorwidth}{\skillmatrix@columnwidth-\cvskill@width-\cvskill@experiencewidth}%
\setlength{\skillmatrix@commentwidth}{\skillmatrix@bodylength-\skillmatrix@columnwidth-3\skillmatrix@padding}%
% lengths and definitions needed for the legends
% note that \skillmatrix@padding also affects the appearance of legends
\setlength{\skilllegend@padding}{0.25ex}%
\setlength{\skilllegend@hintscolumnwidth}{\hintscolumnwidth}%
\setlength{\skilllegend@bodylength}{\skillmatrix@bodylength}%
\RenewDocumentCommand{\skilllegend@leftdesriptorfactor}{}{0.5}%
}
\fi
% Definition of \recompute@cvskillmatrix@lengths for moderncvbodyiii
\if@moderncvbodyiii%
\RenewDocumentCommand{\recompute@cvskillmatrix@lengths}{}{%
\setlength{\skillmatrix@padding}{1ex}%
\setlength{\separatorcolumnwidth}{\skillmatrix@padding}%
\setlength{\skillmatrix@hintscolumnwidth}{\widthof{``Language''}}%
\setlength{\cvskill@width}{\widthof{\cvskill{5}}}%
\setlength{\cvskill@experiencewidth}{\widthof{``Year''}}%
\setlength{\skillmatrix@bodylength}{\maincolumnwidth-\skillmatrix@hintscolumnwidth-\separatorcolumnwidth}%
\setlength{\skillmatrix@columnwidth}{0.45\skillmatrix@bodylength}%
\setlength{\cvskill@descriptorwidth}{\skillmatrix@columnwidth-\cvskill@width-\cvskill@experiencewidth}%
\setlength{\skillmatrix@commentwidth}{\skillmatrix@bodylength-\skillmatrix@columnwidth-3\skillmatrix@padding}%
% lengths and definitions needed for the legends
% note that \skillmatrix@padding also affects the appearance of legends
\setlength{\skilllegend@padding}{0.25ex}%
\setlength{\skilllegend@hintscolumnwidth}{\skillmatrix@hintscolumnwidth}%
\setlength{\skilllegend@bodylength}{\skillmatrix@bodylength}%
\RenewDocumentCommand{\skilllegend@leftdesriptorfactor}{}{0.5}%
}
\fi
% Definition of \recompute@cvskillmatrix@lengths for moderncvbodyiv
\if@moderncvbodyiv%
\RenewDocumentCommand{\recompute@cvskillmatrix@lengths}{}{%
\setlength{\skillmatrix@padding}{1ex}
\setlength{\separatorcolumnwidth}{\skillmatrix@padding}
\setlength{\skillmatrix@hintscolumnwidth}{\widthof{``Languagi''}}
\setlength{\cvskill@width}{\widthof{\cvskill{5}}}
\setlength{\cvskill@experiencewidth}{\widthof{``Year''}}
\setlength{\skillmatrix@bodylength}{\maincolumnwidth-\skillmatrix@hintscolumnwidth-\separatorcolumnwidth}
\setlength{\skillmatrix@columnwidth}{0.45\skillmatrix@bodylength}%
\setlength{\cvskill@descriptorwidth}{\skillmatrix@columnwidth-\cvskill@width-\cvskill@experiencewidth}
\setlength{\skillmatrix@commentwidth}{\skillmatrix@bodylength-\skillmatrix@columnwidth-3\skillmatrix@padding}%
% lengths and definitions needed for the legends
% note that \skillmatrix@padding also affects the appearance of legends
\setlength{\skilllegend@padding}{0.25ex}
\setlength{\skilllegend@hintscolumnwidth}{0ex}%\skillmatrix@hintscolumnwidth
\setlength{\skilllegend@bodylength}{\maincolumnwidth}
\RenewDocumentCommand{\skilllegend@leftdesriptorfactor}{}{0.45}%
}
\fi
% Definition of \recompute@cvskillmatrix@lengths for moderncvbodyv
\if@moderncvbodyv%
\RenewDocumentCommand{\recompute@cvskillmatrix@lengths}{}{%
\setlength{\skillmatrix@padding}{1ex}%
\setlength{\skillmatrix@hintscolumnwidth}{\widthof{``Languages''}}%
\setlength{\cvskill@width}{\widthof{\cvskill{5}}}%
\setlength{\cvskill@experiencewidth}{\widthof{``Year''}}%
\setlength{\skillmatrix@bodylength}{\maincolumnwidth-\skillmatrix@hintscolumnwidth-\skillmatrix@padding}%\skillmatrix@hintscolumnwidth
\setlength{\skillmatrix@columnwidth}{0.45\skillmatrix@bodylength}%
\setlength{\cvskill@descriptorwidth}{\skillmatrix@columnwidth-\cvskill@width-\cvskill@experiencewidth}%
\setlength{\skillmatrix@commentwidth}{\skillmatrix@bodylength-\skillmatrix@columnwidth-3\skillmatrix@padding}%
% lengths and definitions needed for the legends
% note that \skillmatrix@padding also affects the appearance of legends
\setlength{\skilllegend@padding}{0.25ex}%
\setlength{\skilllegend@hintscolumnwidth}{\skillmatrix@hintscolumnwidth}%
\setlength{\skilllegend@bodylength}{\maincolumnwidth}%
\RenewDocumentCommand{\skilllegend@leftdesriptorfactor}{}{0.48}%
}%
\fi
% %-------------------------------------------------------------------------------
% % \setcvskillcolumns and \setcvskilllegendcolumns
% %-------------------------------------------------------------------------------
% \setcvskillcolumns[<width>][<factor>][<exp_width>]
\DeclareDocumentCommand{\setcvskillcolumns}{+O{\skillmatrix@hintscolumnwidth} +O{\skillmatrix@columnwidth} +O{\cvskill@experiencewidth}}{%
% adjust column width of skill table
%
% The \cvskillentry command comes with default FIXED width definitions of the kill matrix for the columns
% based on the author's own skill matrix. This is necessary to ensure that the entries are nicely aligned
% and actually yield a decent looking table. The defaults depend on the style used and are chosen reasonably.
% However, depending on the user input and the style that is used some of the columns might need adjustments.
% The \setcvskillcolumns command provides means to influence the width of the first, the third and the fourth
% skill matrix column. The second column containg the output of \cvskill remains fixed width. The last column,
% the comment column gets recalculated according to the setting of the other columns.
%
% Input
% Input_1 (optional): width smaller than \textwidth, default <\skillmatrix@hintscolumnwidth>
% Input_2 (optional): float between 0 and 1 adjusting how much percent of the table width without
% the first column is used columns two, three and four. Through this parameter
% the width of the 3rd column (skill name) can be adjusted, default <\skillmatrix@columnwidth>
% Input_3 (optional): width smaller than \textwidth, setting the width of the 4th column
% (Years of experience), default <\cvskill@experiencewidth>
%
% Example usage
% \setcvskillcolumns[5em][][]% adjust first column. Same as \setcvskillcolumns[5em]
% \setcvskillcolumns[][0.45][]% adjust third (skill) column. Same as \setcvskillcolumns[][0.45]
% \setcvskillcolumns[][][\widthof{``Year''}]% adjust fourth (years) column.
% \setcvskillcolumns[\widthof{``Language''}][0.48][]% adjust 1st and 3rd columns. Same as \setcvskillcolumns[\widthof{``Language''}][0.45]
% \setcvskillcolumns[\widthof{``Management Tools''}][0.6][3em]% ajust all at once.
%
% Note
% - For the styles 'classic' and 'casual' the first column is set to hintscolumnwidth such that
% it aligns with the rest of the entries. A readjustment of the first column should therefor
% be avoided. It is recomended to only use \setcvskillcolumns in the form of
% \setcvskillcolumns[][<factor>][<width>], thereby leaving the defaults in place for the first column.
%
\def\arg@new@hintscolumnwidth{#1}% <-- all these terminal % signs are necessary for the fancy style to not show weird spaces!!!
\def\arg@new@bodyLengthFactor{#2}%
\def\arg@new@experienceWidth{#3}%
% Check for empty arguments. Defaults are given. Thus a call of \setcvskillcolumns
% without any arguments leads to nonempty arguments \arg@new@hintscolumnwidth and
% \def\arg@new@bodyLengthFactor{#2}. However, we need to take care of calls like
% \setcvskillcolumns[], \setcvskillcolumns[][], \setcvskillcolumns[][][] or even
% \setcvskillcolumns[<somelength>][], \setcvskillcolumns[][<somefactor>] \setcvskillcolumns[][][<length>]
\ifdefempty{\arg@new@hintscolumnwidth}{%
% Case \setcvskillcolumns[], \setcvskillcolumns[][] or \setcvskillcolumns[][<somefactor>]
\ifdefempty{\arg@new@bodyLengthFactor}{%
% Case \setcvskillcolumns[][] do nothing here and check if third argument is empty
\ifdefempty{\arg@new@experienceWidth}{%
% Case \setcvskillcolumns[][][] do nothing here
}{%
% Case \setcvskillcolumns[][][<length>]. reset \cvskill@experiencewidth and
% \cvskill@descriptorwidth accordingly
\setlength{\cvskill@experiencewidth}{\arg@new@experienceWidth}%
\setlength{\cvskill@descriptorwidth}{\skillmatrix@columnwidth-\cvskill@width-\cvskill@experiencewidth}%
}%
}{%
% Case \setcvskillcolumns[][<somefactor>], \setcvskillcolumns[][<somefactor>][<possilly length>]
\setlength{\skillmatrix@columnwidth}{\arg@new@bodyLengthFactor\skillmatrix@bodylength}%
\ifdefempty{\arg@new@experienceWidth}{%
% Case \setcvskillcolumns[][<somefactor>][] do nothing here
}{%
% Case \setcvskillcolumns[][<somefactor>][<length>]. reset \cvskill@experiencewidth and
% \cvskill@descriptorwidth accordingly
\setlength{\cvskill@experiencewidth}{\arg@new@experienceWidth}%
\setlength{\cvskill@descriptorwidth}{\skillmatrix@columnwidth-\cvskill@width-\cvskill@experiencewidth}%
}%
\setlength{\cvskill@descriptorwidth}{\skillmatrix@columnwidth-\cvskill@width-\cvskill@experiencewidth}%
\setlength{\skillmatrix@commentwidth}{\skillmatrix@bodylength-\skillmatrix@columnwidth-3\skillmatrix@padding}%
}%
% Case \setcvskillcolumns[] nothing needs to be done here recalculate lengths affected by the change
}{%
% Case \setcvskillcolumns, \setcvskillcolumns[<width>], \setcvskillcolumns[<width>][]
% or \setcvskillcolumns[<width>][<somefactor>]
\setlength{\skillmatrix@hintscolumnwidth}{\arg@new@hintscolumnwidth}%
\setlength{\skillmatrix@bodylength}{\maincolumnwidth-\skillmatrix@hintscolumnwidth-\separatorcolumnwidth}%
% in case second argument is given but left empty use default
\ifdefempty{\arg@new@bodyLengthFactor}{%
% Case \setcvskillcolumns[<width>][] do nothing here and use default
% \skillmatrix@columnwidth and check third argument
\ifdefempty{\arg@new@experienceWidth}{%
% Case \setcvskillcolumns[<width>][][] do nothing here
}{%
% Case \setcvskillcolumns[<width>][][<length>]. reset \cvskill@experiencewidth and
% \cvskill@descriptorwidth accordingly
\setlength{\cvskill@experiencewidth}{\arg@new@experienceWidth}%
% \setlength{\cvskill@descriptorwidth}{\skillmatrix@columnwidth-\cvskill@width-\cvskill@experiencewidth}%
}%
}{%
% Case \setcvskillcolumns, \setcvskillcolumns[<width>], \setcvskillcolumns[<width>][<somefactor>]
\setlength{\skillmatrix@columnwidth}{\arg@new@bodyLengthFactor\skillmatrix@bodylength}%
\ifdefempty{\arg@new@experienceWidth}{%
% Case \setcvskillcolumns[<width>][<somefactor>][] do nothing here
}{%
% Case \setcvskillcolumns[<width>][<somefactor>][<length>]. reset \cvskill@experiencewidth and
% \cvskill@descriptorwidth accordingly
\setlength{\cvskill@experiencewidth}{\arg@new@experienceWidth}%
% \setlength{\cvskill@descriptorwidth}{\skillmatrix@columnwidth-\cvskill@width-\cvskill@experiencewidth}%
}%
}%
\setlength{\cvskill@descriptorwidth}{\skillmatrix@columnwidth-\cvskill@width-\cvskill@experiencewidth}%
\setlength{\skillmatrix@commentwidth}{\skillmatrix@bodylength-\skillmatrix@columnwidth-3\skillmatrix@padding}%
}%
}%
%
% \setcvskilllegendcolumns[<width>][<factor>]
\DeclareDocumentCommand{\setcvskilllegendcolumns}{+O{\skilllegend@hintscolumnwidth} +O{\skilllegend@leftdesriptorfactor}}{%
% adjust column width of legend
%
% The \cvskilllegend command comes with default FIXED width definitions for the columns of the legend matrix
% such that the default english and german examples look good.
% However, depending on the user input (translation) and the style that is used some adjustment might be needed.
% The \setcvskilllegendcolumns command provides means to influence all columns except the ones containing
% \cvskill commands. The second column containg the output of \cvskill remains fixed width. The last column,
% the comment column gets recalculated according to the setting of the other columns.
%
% Input
% Input_1 (optional): length smaller than \textwidth influencing the width of the first column
% where depending on the style the legend_string gets printed. In case the
% string is left empty adjusting this width allows moving the legend horizontally.
% Default <\skilllegend@hintscolumnwidth>
% Input_2 (optional): float between 0 and 1 influencing the width of the left legend descritor column,
% aka \cvskilllegend@leftdescriptorwidth. The desriptor column on the right,
% \cvskilllegend@rightdescriptorwidth is influenced by the factor 1-<factor>.
% Default <\skilllegend@leftdesriptorfactor>
%
% Example usage
% \setcvskilllegendcolumns[][0.45]%% adjust left desriptor column.
% \setcvskilllegendcolumns[\widthof{``Legend''}][0.45]% adjust both left descriptor column and string column
%
% Note
% - Due to implementation of \cvskilllegend for style 'fancy' (moderncvbodyv)
% the first optional variable has no effect in this case.
% - For the styles 'classic' and 'casual' the first column is set to hintscolumnwidth such that
% it aligns with the rest of the entries. A readjustment of the first column should therefor
% be avoided. It is recomended to only use \cvskilllegend in the form of
% \cvskilllegend[][<factor>], thereby leaving the defaults in place for the first column.
% - For style 'banking' the first column is set to align with the rest of the \cvskillentry entries
% Therefor adjusting the first column can be used to widen the table while moving it around. If no
% legend string is used, setting \cvskilllegend[0em] maximises the real enstate for the legend.
%
\def\arg@new@legend@hintscolumnwidth{#1}%
\def\arg@new@legend@leftDescriptorFactor{#2}%
% Check for empty arguments. See explanation above
\ifdefempty{\arg@new@legend@hintscolumnwidth}{%
% Case \setcvskilllegendcolumns[], \setcvskilllegendcolumns[][] or \setcvskilllegendcolumns[][<somefactor>]
\ifdefempty{\arg@new@legend@leftDescriptorFactor}{%
% % Case \setcvskilllegendcolumns[][] do nothing here, i.e. leave default values unaltered
}{%
% Case \setcvskilllegendcolumns[][<somefactor>], \setcvskilllegendcolumns[][<somefactor>]
\RenewDocumentCommand{\skilllegend@leftdesriptorfactor}{}{\arg@new@legend@leftDescriptorFactor}%
}%
% % Case \setcvskilllegendcolumns[] nothing needs to be done here i.e. leave default values unaltered
}{%
% Case \setcvskilllegendcolumns, \setcvskilllegendcolumns[<width>], \setcvskilllegendcolumns[<width>][]
% or \setcvskilllegendcolumns[<width>][<somefactor>]
\setlength{\skilllegend@hintscolumnwidth}{\arg@new@legend@hintscolumnwidth}%
\if@moderncvbodyi%
\setlength{\skilllegend@bodylength}{\textwidth-\skilllegend@hintscolumnwidth-\separatorcolumnwidth}%
\fi%
\if@moderncvbodyiii%
\setlength{\skilllegend@bodylength}{\textwidth-\skilllegend@hintscolumnwidth-\separatorcolumnwidth}%
\fi%
\if@moderncvbodyiv%
\setlength{\skilllegend@bodylength}{\maincolumnwidth-\skilllegend@hintscolumnwidth-\separatorcolumnwidth}%
\fi%
% in case second argument is given but left empty use default
\ifdefempty{\arg@new@legend@leftDescriptorFactor}{%
% Case \setcvskilllegendcolumns[<width>][] do nothing here and leave default values unaltered
}{%
% Case \setcvskilllegendcolumns, \setcvskilllegendcolumns[<width>], \setcvskilllegendcolumns[<width>][<somefactor>]
\RenewDocumentCommand{\skilllegend@leftdesriptorfactor}{}{\arg@new@legend@leftDescriptorFactor}%
}%
}%
}%
%
% %-------------------------------------------------------------------------------
% % \cvskilllegend
% %-------------------------------------------------------------------------------
% default legend style
% \cvskilllegend[*][<post_padding>][<first_level>][<second_level>][<third_level>][<fourth_level>][<fifth_level>]{<name>}
\NewDocumentCommand\skillLegend@FontSize{}{\scriptsize}
\DeclareDocumentCommand\cvskilllegend{s +O{} +O{} +O{} +O{} +O{} +O{} +m}{}%
% Print legend table explaining the meaning of \cvskill{1}...\cvskill{5}.
%
% Input:
% asterix (optional): include vertical (dashed) lines. This behaviour depends on the body style.
% For the fancy style, the asterix has no meaning.
% input_1 (optional): padding length appended to the legend, default: <0.25em>
% input_2 (optional): string describing meaning of \cvskill{1}, default: <basic knowledge>
% input_3 (optional): string describing meaning of \cvskill{2}, default: <intermediate knowledge with some project experience>
% input_4 (optional): string describing meaning of \cvskill{3}, default: <extensive project experience>
% input_5 (optional): string describing meaning of \cvskill{4}, default: <deepened expert knowledge>
% input_6 (optional): string describing meaning of \cvskill{5}, default: <expert/guru>
% input_7: string giving a name to the legend, default: <>
%
% Example usages:
% \cvskilllegend{} print default legend
% \cvskilllegend[0.5em]{Legend} print default legend, but adjust post padding and display the word ``Legend''.
% \cvskilllegend*[0.2em][Grundkenntnisse][Grundkenntnisse und eigene Erfahrung in Projekten][Umfangreiche Erfahrung in Projekten][Vertiefte Expertenkenntnisse][Experte/Guru]{Legende} Fully adjust legend to German example and including dashed lines
%
% Note:
% -The width of the columns can be adjusted by the \setcvskilllegendcolumns, see \setcvskilllegendcolumns
% -The design of the table is such that the <second_level> entry stands in the first column but
% occupies rows two and three. This has been done to accomodate english and german defaults.
% An alternative is provided by \cvskillplainlegend
% declare default legend entries
\NewDocumentCommand\skillLegend@defaultLevelOne{}{basic knowledge}
\NewDocumentCommand\skillLegend@defaultLevelTwo{}{intermediate knowledge with some project experience}
\NewDocumentCommand\skillLegend@defaultLevelThree{}{extensive project experience}
\NewDocumentCommand\skillLegend@defaultLevelFour{}{deepened expert knowledge}
\NewDocumentCommand\skillLegend@defaultLevelFive{}{expert\,/\,specialist}
% Redefinition of \cvskilllegend valid for moderncvbodyi, moderncvbodyii, moderncvbodyiii
\RenewDocumentCommand\cvskilllegend{s +O{.25em} +O{\skillLegend@defaultLevelOne} +O{\skillLegend@defaultLevelTwo} +O{\skillLegend@defaultLevelThree} +O{\skillLegend@defaultLevelFour} +O{\skillLegend@defaultLevelFive} +m}{%
\IfBooleanTF#1{% if a star is given, add dashed line
\begingroup%
\arrayrulecolor{bodyrulecolor}%
% calculate descriptor widths
\setlength{\cvskilllegend@leftdescriptorwidth}{\skilllegend@leftdesriptorfactor\skilllegend@bodylength-\cvskill@width-\skillmatrix@padding-3\skilllegend@padding}%
\setlength{\cvskilllegend@rightdescriptorwidth}{\skilllegend@bodylength-\skilllegend@leftdesriptorfactor\skilllegend@bodylength-\cvskill@width-\skillmatrix@padding-3\skilllegend@padding}%
\begin{tabular}{@{}p{\skilllegend@hintscolumnwidth}%
@{\hspace{\separatorcolumnwidth}}%
p{\cvskill@width}@{\hspace{\skilllegend@padding}};{.6pt/1pt}%%
p{2\skilllegend@padding}p{\cvskilllegend@leftdescriptorwidth}@{}@{\hspace{2\skillmatrix@padding}}%
p{\cvskill@width}@{\hspace{\skilllegend@padding}};{.6pt/1pt}%
p{2\skilllegend@padding}%
p{\cvskilllegend@rightdescriptorwidth}@{}}%
\raggedleft\hintstyle{#8} & \cvskill{1}& & {\skillLegend@FontSize #3} & \cvskill{3}& &{\skillLegend@FontSize #5 } \\%
%
& \cvskill{2} & & \multirow{2}{\cvskilllegend@leftdescriptorwidth}{{\skillLegend@FontSize #4}} & \cvskill{4}& & {\skillLegend@FontSize #6 } \\%
%
& & & & \cvskill{5}& & {\skillLegend@FontSize #7 }%
\end{tabular}%
\endgroup
\par\addvspace{#2}}{%
% if no star is given, do not add dashed line. We need less padding in this case
\begingroup%
% calculate descriptor columns width. note the adjusted padding
\setlength{\cvskilllegend@leftdescriptorwidth}{\skilllegend@leftdesriptorfactor\skilllegend@bodylength-\cvskill@width-\skillmatrix@padding-1\skilllegend@padding}%
\setlength{\cvskilllegend@rightdescriptorwidth}{\skilllegend@bodylength-\skilllegend@leftdesriptorfactor\skilllegend@bodylength-\cvskill@width-\skillmatrix@padding-1\skilllegend@padding}%
\begin{tabular}{@{}p{\skilllegend@hintscolumnwidth}%
@{\hspace{\separatorcolumnwidth}}%
p{\cvskill@width}@{\hspace{\skilllegend@padding}}%
p{\cvskilllegend@leftdescriptorwidth}@{\hspace{2\skillmatrix@padding}}%
p{\cvskill@width}@{\hspace{\skilllegend@padding}}%
p{\cvskilllegend@rightdescriptorwidth}@{}}%
\raggedleft\hintstyle{#8} & \cvskill{1}\, & \,{\skillLegend@FontSize #3} & \cvskill{3}\, &\,{\skillLegend@FontSize #5 } \\%
%
& \cvskill{2}\, & \,\multirow{2}{\cvskilllegend@leftdescriptorwidth}{{\skillLegend@FontSize #4}} & \cvskill{4}\, &\,{\skillLegend@FontSize #6 } \\%
%
& & & \cvskill{5}\, &\,{\skillLegend@FontSize #7 }%
\end{tabular}%
\endgroup%
\par\addvspace{#2}%
}%
}%
% Redefinition of \cvskilllegend valid for moderncvbodyiv
\if@moderncvbodyiv%
\RenewDocumentCommand\cvskilllegend{s +O{.25em} +O{\skillLegend@defaultLevelOne} +O{\skillLegend@defaultLevelTwo} +O{\skillLegend@defaultLevelThree} +O{\skillLegend@defaultLevelFour} +O{\skillLegend@defaultLevelFive} +m}{%
\def\arg@legendString{#8}%
\ifdefempty{\arg@legendString}{%
}{%
\cvitem[0.25em]{\hintstyle{#8}}{}%
}%
\IfBooleanTF#1{% if a star is given, add dashed line
\begingroup%
% recalculate desrciptor widths on the fly. Allows for different padding
% in the stared and nonstared case
\setlength{\cvskilllegend@leftdescriptorwidth}{\skilllegend@leftdesriptorfactor\skilllegend@bodylength-\cvskill@width-\skillmatrix@padding-4\skilllegend@padding}%
\setlength{\cvskilllegend@rightdescriptorwidth}{\skilllegend@bodylength-\skilllegend@leftdesriptorfactor\skilllegend@bodylength-\cvskill@width-\skillmatrix@padding-4\skilllegend@padding}%
\arrayrulecolor{bodyrulecolor}
\begin{tabular}{@{}p{\skilllegend@hintscolumnwidth}
@{\hspace{\separatorcolumnwidth}}p{\cvskill@width}@{\hspace{\skilllegend@padding}};{.6pt/1pt}%
p{2\skilllegend@padding}%
p{\cvskilllegend@leftdescriptorwidth}@{\hspace{\skillmatrix@padding}}%
p{\cvskill@width}@{\hspace{\skilllegend@padding}};{.6pt/1pt}%
p{2\skilllegend@padding}p{\cvskilllegend@rightdescriptorwidth}@{}}%
\raggedleft\hintstyle{} & \cvskill{1} & & {\skillLegend@FontSize #3} & \cvskill{3} & & {\skillLegend@FontSize #5 } \\
%
& \cvskill{2} & & \multirow{2}{\cvskilllegend@leftdescriptorwidth}{{\skillLegend@FontSize #4}} & \cvskill{4} & &{\skillLegend@FontSize #6 } \\
%
& & & & \cvskill{5}& & {\skillLegend@FontSize #7 }
\end{tabular}%
\endgroup%
\par\addvspace{#2}}{
\begingroup%
% oddly enough, we should only need to subtract 2 paddings in the descritorwidths.
% but while testing I got overflow of text into the margin
\setlength{\cvskilllegend@leftdescriptorwidth}{\skilllegend@leftdesriptorfactor\skilllegend@bodylength-\cvskill@width-\skillmatrix@padding-4\skilllegend@padding}%
\setlength{\cvskilllegend@rightdescriptorwidth}{\skilllegend@bodylength-\skilllegend@leftdesriptorfactor\skilllegend@bodylength-\cvskill@width-\skillmatrix@padding-5\skilllegend@padding}%
\begin{tabular}{@{}p{\skilllegend@hintscolumnwidth}
@{\hspace{\separatorcolumnwidth}}p{\cvskill@width}@{\hspace{2\skilllegend@padding}}%
p{\cvskilllegend@leftdescriptorwidth}@{\hspace{2\skillmatrix@padding}}%
p{\cvskill@width}@{\hspace{2\skilllegend@padding}}%
p{\cvskilllegend@rightdescriptorwidth}@{}}%
\raggedleft\hintstyle{} & \cvskill{1} & {\skillLegend@FontSize #3} & \cvskill{3} & {\skillLegend@FontSize #5 } \\
%
& \cvskill{2} & \multirow{2}{\cvskilllegend@leftdescriptorwidth}{{\skillLegend@FontSize #4}} & \cvskill{4} &{\skillLegend@FontSize #6 } \\
%
& & & \cvskill{5} & {\skillLegend@FontSize #7 }
\end{tabular}%
\endgroup%
\par\addvspace{#2}
}
}
\fi
% Redefinition of \cvskilllegend valid for moderncvbodyv
\if@moderncvbodyv%
\DeclareDocumentCommand\@starIndependentTabular{}{}%
\RenewDocumentCommand\cvskilllegend{s +O{.25em} +O{\skillLegend@defaultLevelOne} +O{\skillLegend@defaultLevelTwo} +O{\skillLegend@defaultLevelThree} +O{\skillLegend@defaultLevelFour} +O{\skillLegend@defaultLevelFive} +m}{%
% check whether Argument #8 is given and if so provide it as cvitem
\def\arg@legendString{#8}%
\ifdefempty{\arg@legendString}{%
\vspace*{-\separatorrulewidth}% HACK; I don't understand where the space is coming from, nor what it's exact value is :(
}{%
\cvitem[-0.5em]{#8}{}%
}%
\arrayrulecolor{bodyrulecolor}%
\setlength\arrayrulewidth{\separatorrulewidth}%
\RenewDocumentCommand{\@starIndependentTabular}{}{%
\begingroup%
\setlength{\cvskilllegend@leftdescriptorwidth}{\skilllegend@leftdesriptorfactor\skilllegend@bodylength-\cvskill@width-\skillmatrix@padding-3\skilllegend@padding}%
\setlength{\cvskilllegend@rightdescriptorwidth}{\skilllegend@bodylength-\skilllegend@leftdesriptorfactor\skilllegend@bodylength-\cvskill@width-\skillmatrix@padding-3\skilllegend@padding}%
% \renewcommand{\arraystretch}{1.0}%
\begin{tabular}[t]{@{}p{\hintscolumnwidth}%\skilllegend@hintscolumnwidth
@{\hspace{\separatorcolumnwidth}}|@{\hspace{\separatorcolumnwidth}}%
p{\cvskill@width}@{\hspace{3\skilllegend@padding}}%
p{\cvskilllegend@leftdescriptorwidth}@{\hspace{2\skillmatrix@padding}}%
p{\cvskill@width}@{\hspace{3\skilllegend@padding}}%
p{\cvskilllegend@rightdescriptorwidth}@{}}%
\@moderncvstrut{4pt}{16pt} & \cvskill{1}& {\skillLegend@FontSize #3} & \cvskill{3}& {\skillLegend@FontSize #5 }\\%
%
& \cvskill{2}& \multirow{2}{\cvskilllegend@leftdescriptorwidth}{{\skillLegend@FontSize #4}} & \cvskill{4}& {\skillLegend@FontSize #6 }\\%
%
& & & \cvskill{5} & {\skillLegend@FontSize #7 }\\[#2]% the spacing needs to be inside the cell for the vertical rule to extend correctly
\end{tabular}%
\endgroup%
\par\@aftersectionfalse\ignorespaces%
}%
% because of this weird style and the position of the parameter [#2], the dashed lines of the other version look bad. So no lines.
\IfBooleanTF#1{%
\@starIndependentTabular%
}{%
\@starIndependentTabular%
}%
}%
\fi
% %-------------------------------------------------------------------------------
% % \cvskillplainlegend
% %-------------------------------------------------------------------------------
% alternative legend style
% \cvskillplainlegend[*][<post_padding>][<first_level>][<second_level>][<third_level>][<fourth_level>][<fifth_level>]{<name>}
\DeclareDocumentCommand\cvskillplainlegend{s +O{} +O{} +O{} +O{} +O{} +O{} +m}{}%
% Print alternative legend table explaining the meaning of \cvskill{1}...\cvskill{5}.
% In this legend, the first three skill levels are in one column
%
% Input:
% asterix (optional): include vertical (dashed) lines. This behaviour depends on the body style.
% For the fancy style, the asterix has no meaning.
% input_1 (optional): padding length appended to the legend, default: <0.25em>
% input_2 (optional): string describing meaning of \cvskill{1}, default: <basic knowledge>
% input_3 (optional): string describing meaning of \cvskill{2}, default: <intermediate knowledge with some project experience>
% input_4 (optional): string describing meaning of \cvskill{3}, default: <extensive project experience>
% input_5 (optional): string describing meaning of \cvskill{4}, default: <deepened expert knowledge>
% input_6 (optional): string describing meaning of \cvskill{5}, default: <expert/guru>
% input_7: string giving a name to the legend, default: <>
%
% Example usages:
% \cvskillplainlegend{} print default legend
% \cvskillplainlegend[0.5em]{Legend} print default legend, but adjust post padding and display the word ``Legend''.
% \cvskillplainlegend*[0.2em][Grundkenntnisse][Grundkenntnisse und eigene Erfahrung in Projekten][Umfangreiche Erfahrung in Projekten][Vertiefte Expertenkenntnisse][Experte/Guru]{Legende} Fully adjust legend to German example and including dashed lines
%
% Note:
% -The width of the columns can be adjusted by the \setcvskilllegendcolumns, see \setcvskilllegendcolumns
% declare default legend entries
\NewDocumentCommand\skillPlainLegend@defaultLevelOne{}{basic knowlegde}
\NewDocumentCommand\skillPlainLegend@defaultLevelTwo{}{intermediate knowledge, some project experience}
\NewDocumentCommand\skillPlainLegend@defaultLevelThree{}{extensive project experience}
\NewDocumentCommand\skillPlainLegend@defaultLevelFour{}{deepened expert knowledge}
\NewDocumentCommand\skillPlainLegend@defaultLevelFive{}{expert/guru}
% Redefinition of \cvskillplainlegend valid for moderncvbodyi, moderncvbodyii, moderncvbodyiii
\RenewDocumentCommand\cvskillplainlegend{s +O{.25em} +O{\skillPlainLegend@defaultLevelOne} +O{\skillPlainLegend@defaultLevelTwo} +O{\skillPlainLegend@defaultLevelThree} +O{\skillPlainLegend@defaultLevelFour} +O{\skillPlainLegend@defaultLevelFive} +m}{%
\IfBooleanTF#1{% if a star is given, add dashed line
\begingroup%
\arrayrulecolor{bodyrulecolor}%
% calculate descriptor widths
\setlength{\cvskilllegend@leftdescriptorwidth}{\skilllegend@leftdesriptorfactor\skilllegend@bodylength-\cvskill@width-\skillmatrix@padding-3\skilllegend@padding}%
\setlength{\cvskilllegend@rightdescriptorwidth}{\skilllegend@bodylength-\skilllegend@leftdesriptorfactor\skilllegend@bodylength-\cvskill@width-\skillmatrix@padding-3\skilllegend@padding}%
\begin{tabular}{@{}p{\skilllegend@hintscolumnwidth}%
@{\hspace{\separatorcolumnwidth}}%
p{\cvskill@width}@{\hspace{\skilllegend@padding}};{.6pt/1pt}%%
p{2\skilllegend@padding}p{\cvskilllegend@leftdescriptorwidth}@{}@{\hspace{2\skillmatrix@padding}}%
p{\cvskill@width}@{\hspace{\skilllegend@padding}};{.6pt/1pt}%
p{2\skilllegend@padding}%
p{\cvskilllegend@rightdescriptorwidth}@{}}%
\raggedleft\hintstyle{#8} & \cvskill{1}& & {\skillLegend@FontSize #3} & \cvskill{4}& &{\skillLegend@FontSize #6} \\%
%
& \cvskill{2} & & {\skillLegend@FontSize #4} & \cvskill{5}& & {\skillLegend@FontSize #7} \\%
%
& \cvskill{3} & & {\skillLegend@FontSize #5} & & & %
\end{tabular}%
\endgroup%
\par\addvspace{#2}}{%
% if no star is given, do not add dashed line
\begingroup%
% calculate descriptor widths, note that we use less padding
\setlength{\cvskilllegend@leftdescriptorwidth}{\skilllegend@leftdesriptorfactor\skilllegend@bodylength-\cvskill@width-\skillmatrix@padding-2\skilllegend@padding}%
\setlength{\cvskilllegend@rightdescriptorwidth}{\skilllegend@bodylength-\skilllegend@leftdesriptorfactor\skilllegend@bodylength-\cvskill@width-\skillmatrix@padding-2\skilllegend@padding}%
\begin{tabular}{@{}p{\skilllegend@hintscolumnwidth}%
@{\hspace{\separatorcolumnwidth}}%
p{\cvskill@width}@{\hspace{2\skilllegend@padding}}%
p{\cvskilllegend@leftdescriptorwidth}@{\hspace{2\skillmatrix@padding}}%
p{\cvskill@width}@{\hspace{2\skilllegend@padding}}%
p{\cvskilllegend@rightdescriptorwidth}@{}}%
\raggedleft\hintstyle{#8} & \cvskill{1} & {\skillLegend@FontSize #3} & \cvskill{4} &{\skillLegend@FontSize #6} \\%
%
& \cvskill{2} & {\skillLegend@FontSize #4} & \cvskill{5} &{\skillLegend@FontSize #7} \\%
%
& \cvskill{3} & {\skillLegend@FontSize #5 } & & %
\end{tabular}%
\endgroup%
\par\addvspace{#2}%
}%
}%
% Redefinition of \cvskillplainlegend valid for moderncvbodyiv
\if@moderncvbodyiv%
\RenewDocumentCommand\cvskillplainlegend{s +O{.25em} +O{\skillPlainLegend@defaultLevelOne} +O{\skillPlainLegend@defaultLevelTwo} +O{\skillPlainLegend@defaultLevelThree} +O{\skillPlainLegend@defaultLevelFour} +O{\skillPlainLegend@defaultLevelFive} +m}{%
\def\arg@legendString{#8}%
\ifdefempty{\arg@legendString}{%
}{%
\cvitem[0.25em]{\hintstyle{#8}}{}%
}%
\IfBooleanTF#1{% if a star is given, add dashed line
\begingroup%
\arrayrulecolor{bodyrulecolor}
\setlength{\cvskilllegend@leftdescriptorwidth}{\skilllegend@leftdesriptorfactor\skilllegend@bodylength-\cvskill@width-\skillmatrix@padding-6\skilllegend@padding}%
\setlength{\cvskilllegend@rightdescriptorwidth}{\skilllegend@bodylength-\skilllegend@leftdesriptorfactor\skilllegend@bodylength-\cvskill@width-\skillmatrix@padding-6\skilllegend@padding}%
\begin{tabular}{@{}p{\skilllegend@hintscolumnwidth}
@{\hspace{\separatorcolumnwidth}}p{\cvskill@width}@{\hspace{\skilllegend@padding}};{.6pt/1pt}%
p{2\skilllegend@padding}%
p{\cvskilllegend@leftdescriptorwidth}@{\hspace{2\skillmatrix@padding}}%
p{\cvskill@width}@{\hspace{\skilllegend@padding}};{.6pt/1pt}%
p{2\skilllegend@padding}p{\cvskilllegend@rightdescriptorwidth}@{}}%
\raggedleft\hintstyle{} & \cvskill{1} & & {\skillLegend@FontSize#3} & \cvskill{4} & & {\skillLegend@FontSize#6}\\%
%
& \cvskill{2} & &{\skillLegend@FontSize#4} & \cvskill{5} & &{\skillLegend@FontSize#7}\\%
%
& \cvskill{3} & &{\skillLegend@FontSize#5} & & &%
\end{tabular}%
\endgroup%
\par\addvspace{#2}}{
% if no star is given, do not add dashed line
\begingroup
\setlength{\cvskilllegend@leftdescriptorwidth}{\skilllegend@leftdesriptorfactor\skilllegend@bodylength-\cvskill@width-\skillmatrix@padding-3\skilllegend@padding}%
\setlength{\cvskilllegend@rightdescriptorwidth}{\skilllegend@bodylength-\skilllegend@leftdesriptorfactor\skilllegend@bodylength-\cvskill@width-\skillmatrix@padding-4\skilllegend@padding}%
\begin{tabular}{@{}p{\skilllegend@hintscolumnwidth}
@{\hspace{\separatorcolumnwidth}}p{\cvskill@width}@{\hspace{\skilllegend@padding}}%
p{\cvskilllegend@leftdescriptorwidth}@{\hspace{2\skillmatrix@padding}}%
p{\cvskill@width}@{\hspace{\skilllegend@padding}}%
p{\cvskilllegend@rightdescriptorwidth}@{}}%
\raggedleft\hintstyle{} & \cvskill{1} & {\skillLegend@FontSize #3} & \cvskill{4} & {\skillLegend@FontSize #6} \\
%
& \cvskill{2} & {\skillLegend@FontSize #4} & \cvskill{5} & {\skillLegend@FontSize #7} \\
%
& \cvskill{3} & {\skillLegend@FontSize #5} & & %
\end{tabular}%
\endgroup
\par\addvspace{#2}
}
}
\fi
% Redefinition of \cvskillplainlegend valid for moderncvbodyv
\if@moderncvbodyv%
\RenewDocumentCommand\cvskillplainlegend{s +O{.25em} +O{\skillPlainLegend@defaultLevelOne} +O{\skillPlainLegend@defaultLevelTwo} +O{\skillPlainLegend@defaultLevelThree} +O{\skillPlainLegend@defaultLevelFour} +O{\skillPlainLegend@defaultLevelFive} +m}{%
% check whether Argument #8 is given and if so provide it as cvitem
\def\arg@legendString{#8}%
\ifdefempty{\arg@legendString}{%
\vspace*{-\separatorrulewidth}% HACK; I don't understand where the space is coming from, nor what it's exact value is :(
}{%
\cvitem[-0.5em]{#8}{}%
}%
\arrayrulecolor{bodyrulecolor}%
\setlength\arrayrulewidth{\separatorrulewidth}%
\RenewDocumentCommand{\@starIndependentTabular}{}{%
\begingroup%
% \renewcommand{\arraystretch}{1.0}%
\setlength{\cvskilllegend@leftdescriptorwidth}{\skilllegend@leftdesriptorfactor\skilllegend@bodylength-\cvskill@width-\skillmatrix@padding-2\skilllegend@padding}%
\setlength{\cvskilllegend@rightdescriptorwidth}{\skilllegend@bodylength-\skilllegend@leftdesriptorfactor\skilllegend@bodylength-\cvskill@width-\skillmatrix@padding-2\skilllegend@padding}%
\begin{tabular}[t]{@{}p{\hintscolumnwidth}%\skilllegend@hintscolumnwidth
@{\hspace{\separatorcolumnwidth}}|@{\hspace{\separatorcolumnwidth}}%
p{\cvskill@width}@{\hspace{2\skilllegend@padding}}%
p{\cvskilllegend@leftdescriptorwidth}@{\hspace{2\skillmatrix@padding}}%
p{\cvskill@width}@{\hspace{2\skilllegend@padding}}%
p{\cvskilllegend@rightdescriptorwidth}@{}}%
\@moderncvstrut{4pt}{16pt} & \cvskill{1} & {\skillLegend@FontSize #3} & \cvskill{4} & {\skillLegend@FontSize #6}\\%
%
& \cvskill{2} & {\skillLegend@FontSize #4} & \cvskill{5} & {\skillLegend@FontSize #7}\\%
%
& \cvskill{3} & {\skillLegend@FontSize #5} & & \\[#2]% the spacing needs to be inside the cell for the vertical rule to extend correctly
\end{tabular}%
\endgroup%
\par\@aftersectionfalse\ignorespaces%
}%
% because of this weird style and the position of the parameter [#2], the dashed lines of the other version look bad. So no lines.
\IfBooleanTF#1{%
\@starIndependentTabular%
}{%
\@starIndependentTabular%
}%
}%
\fi
% %-------------------------------------------------------------------------------
% % \cvskillhead
% %-------------------------------------------------------------------------------
\NewDocumentCommand\cvSkillMatrix@HeadFont{}{\normalfont}
\DeclareDocumentCommand\cvskillhead{+O{} +O{} +O{} +O{} +O{}}{}%
% add skill matrix line acting as header explaining the meaning of columns.
%
% Input:
% input_1 (optional): padding length appended to the legend, default: <0.25em>
% input_2 (optional): string naming the level column (2nd column), default: <Level>
% input_3 (optional): string naming the skill column (3nd column), default: <Skill>
% input_4 (optional): string naming the experience-in-years column (4th column), default: <Years>
% input_5 (optional): string naming the comment column (5th column), default: <Comment>
%
% Example usages:
% \cvskillhead print default head.
% \cvskillhead[0.5em] print default head, but adjust post padding.
% \cvskillhead[0.25em][Level][F\"ahigkeit][Jahre][Bemerkung] Fully adjust head to German example
%
% Note:
% - The width of the columns can be adjusted by the \setcvskillcolumns command, see \setcvskillcolumns.
\NewDocumentCommand\skillMatrix@HeaderDefaultOne{}{Level}
\NewDocumentCommand\skillMatrix@HeaderDefaultTwo{}{Skill}
\NewDocumentCommand\skillMatrix@HeaderDefaultThree{}{Years}
\NewDocumentCommand\skillMatrix@HeaderDefaultFour{}{Comment}
% Definition of \cvskillhead valid for moderncvbodyi, moderncvbodyii, moderncvbodyiii, moderncvbodyiv
\RenewDocumentCommand\cvskillhead{O{.25em} +O{\skillMatrix@HeaderDefaultOne} +O{\skillMatrix@HeaderDefaultTwo} +O{\skillMatrix@HeaderDefaultThree} +O{\skillMatrix@HeaderDefaultFour}}{%
\begingroup
\renewcommand{\arraystretch}{1.25}
\arrayrulecolor{bodyrulecolor}
\begin{tabular}{@{}p{\skillmatrix@hintscolumnwidth}@{\hspace{\separatorcolumnwidth}}%
p{\cvskill@width}@{\hspace{\skillmatrix@padding}}%
p{\cvskill@descriptorwidth}@{\hspace{\skillmatrix@padding}}%
p{\cvskill@experiencewidth}@{\hspace{\skillmatrix@padding}}
p{\skillmatrix@commentwidth}@{}}%
& \centering{\cvSkillMatrix@HeadFont #2} & \centering{\cvSkillMatrix@HeadFont #3} & \centering{\cvSkillMatrix@HeadFont #4} & {\cvSkillMatrix@HeadFont #5}
\end{tabular}%
\endgroup
\par\addvspace{#1}
}
% Definition of \cvskillhead valid moderncvbodyv
\if@moderncvbodyv%
\RenewDocumentCommand\cvskillhead{O{.25em} +O{\skillMatrix@HeaderDefaultOne} +O{\skillMatrix@HeaderDefaultTwo} +O{\skillMatrix@HeaderDefaultThree} +O{\skillMatrix@HeaderDefaultFour}}{%
\arrayrulecolor{bodyrulecolor}%
\setlength\arrayrulewidth{\separatorrulewidth}%
\vspace*{-\separatorrulewidth}% HACK; I don't understand where the space is coming from, nor what it's exact value is :(
\begingroup%
% \renewcommand{\arraystretch}{1.25}%
\begin{tabular}[t]{@{}p{\hintscolumnwidth}%
@{\hspace{\separatorcolumnwidth}}|@{\hspace{\separatorcolumnwidth}}%
p{\skillmatrix@hintscolumnwidth}%
@{\hspace{\skillmatrix@padding}}%
p{\cvskill@width}@{\hspace{\skillmatrix@padding}}%
p{\cvskill@descriptorwidth}@{\hspace{\skillmatrix@padding}}%
p{\cvskill@experiencewidth}@{\hspace{\skillmatrix@padding}}%
p{\skillmatrix@commentwidth}@{}}%
& & \centering{\cvSkillMatrix@HeadFont#2} & \centering{\cvSkillMatrix@HeadFont#3} & \centering{\cvSkillMatrix@HeadFont#4} & {\cvSkillMatrix@HeadFont#5} \\[#1]% the spacing needs to be inside the cell for the vertical rule to extend correctly
\end{tabular}%
\endgroup%
\par\@aftersectionfalse\ignorespaces%
}%
\fi
% %-------------------------------------------------------------------------------
% % \cvskillentry
% %-------------------------------------------------------------------------------
% \cvskillentry[*][<post_padding>]{<skill_cathegory>}{<0-5>}{<skill_name>}{<years_of_experience>}{<comment>}%
\DeclareDocumentCommand\cvskillentry{s +O{} +m +m +m +m +m}{}%
% add cvskill matrix row.
%
% Input:
% asterix (optional): include horizontal (dashed) line above the entered line. This behaviour depends on the body style.
% For the fancy style, the asterix has no meaning.
% input_1 (optional): padding length appended to the legend, default: <0.25em>
% input_2: string, naming skill cathegory, default: <>
% input_3: integer between 0 and 5, describing level of skill. \cvskill{input_2} is called internally, default: <>
% input_4: string, naming the skill, default: <>
% input_5: positive real number, stating the number of years of experience with this skill , default: <>
% input_6: string, explaining details w.r.t. that particual skill default: <>
%
% Example usages:
% \cvskillentry*{Language:}{3}{Python}{2}{I have done a million projects with Python}
% \cvskillentry{}{2}{Lilypond}{14}{So much sheet music! Man I'm the best!}
% \cvskillentry{}{3}{\LaTeX}{14}{Clearly I rock at \LaTeX}
% \cvskillentry*[1.5em]{OS:}{3}{Linux}{2}{I only use Archlinux}
%
% Note:
% - The width of the columns can be adjusted by the \setcvskillcolumns command, see \setcvskillcolumns.
% Definition of \cvskillentry valid for moderncvbodyi, moderncvbodyii, moderncvbodyiii, moderncvbodyiv
\RenewDocumentCommand\cvskillentry{s +O{.25em} +m +m +m +m +m}{%
%test for the star * in the command
\IfBooleanTF{#1}{% If a star is seen a dotted line is drawn above the entry
\begingroup
\renewcommand{\arraystretch}{1.25}
\arrayrulecolor{bodyrulecolor}
\begin{tabular}{@{}p{\skillmatrix@hintscolumnwidth}@{\hspace{\separatorcolumnwidth}}%
p{\cvskill@width}@{\hspace{\skillmatrix@padding}}%
p{\cvskill@descriptorwidth}@{\hspace{\skillmatrix@padding}}%
p{\cvskill@experiencewidth} @{\hspace{\skillmatrix@padding}}%
p{\skillmatrix@commentwidth}@{}}%
\cdashline{2-5}[.6pt/1pt]
\raggedleft\hintstyle{#3} &\centering \cvskill{#4} &\centering {#5} & \centering {#6} &{\itshape#7}%
\end{tabular}%
\endgroup
\par\addvspace{#2}
}{% If no star is seen no line is drawn
\begin{tabular}{@{}p{\skillmatrix@hintscolumnwidth}@{\hspace{\separatorcolumnwidth}}%
p{\cvskill@width}@{\hspace{\skillmatrix@padding}}%
p{\cvskill@descriptorwidth}@{\hspace{\skillmatrix@padding}}%
p{\cvskill@experiencewidth}%
@{\hspace{\skillmatrix@padding}}%
p{\skillmatrix@commentwidth}@{}}%
\raggedleft\hintstyle{#3} &\centering \cvskill{#4} &\centering {#5} & \centering {#6} &{\itshape#7}%
\end{tabular}%
\par\addvspace{#2}
}
}
% Definition of \cvskillentry valid for moderncvbodyv
\if@moderncvbodyv%
\DeclareDocumentCommand\@starIndependentMatrixEntry{}{}%
\RenewDocumentCommand\cvskillentry{s O{.25em} +m +m +m +m +m}{%
\arrayrulecolor{bodyrulecolor}%
\setlength\arrayrulewidth{\separatorrulewidth}%
\vspace*{-\separatorrulewidth}% HACK; I don't understand where the space is coming from, nor what it's exact value is :(
%test for the star * in the command
\RenewDocumentCommand{\@starIndependentMatrixEntry}{}{%
\begingroup%
\renewcommand{\arraystretch}{1.25}%
\begin{tabular}[t]{@{}p{\hintscolumnwidth}%
@{\hspace{\separatorcolumnwidth}}|@{\hspace{\separatorcolumnwidth}}p{\skillmatrix@hintscolumnwidth}
@{\hspace{\skillmatrix@padding}}%
p{\cvskill@width}@{\hspace{\skillmatrix@padding}}%
p{\cvskill@descriptorwidth}@{\hspace{\skillmatrix@padding}}%
p{\cvskill@experiencewidth} @{\hspace{\skillmatrix@padding}}p{\skillmatrix@commentwidth}@{}}%
% \cline{3-6}%
& \raggedleft\hintstyle{#3} &\centering \cvskill{#4} &\centering {#5} & \centering {#6} &{\itshape#7}\\[#2]%
\end{tabular}%
\endgroup%
}%
\IfBooleanTF{#1}{% the star does not do anything here
\@starIndependentMatrixEntry%
}{%
\@starIndependentMatrixEntry%
}%
\par\@aftersectionfalse\ignorespaces%
}%
\fi
%
\endinput
%% end of file `moderncvskillmatrix.sty'.