% \iffalse meta-comment
%
% Copyright (C) 2011-2015 by Rapha��l Pinson <raphink@gmail.com>
% ---------------------------------------------------------------------------
% This work may be distributed and/or modified under the
% conditions of the LaTeX Project Public License, either version 1.3
% of this license or (at your option) any later version.
% The latest version of this license is in
% http://www.latex-project.org/lppl.txt
% and version 1.3 or later is part of all distributions of LaTeX
% version 2005/12/01 or later.
%
% This work has the LPPL maintenance status `maintained'.
%
% The Current Maintainer of this work is Rapha��l Pinson.
%
% This work consists of the files moderntimeline.dtx and moderntimeline.ins
% and the derived filebase moderntimeline.sty.
%
% \fi
%
% \iffalse
%<*driver>
\ProvidesFile{moderntimeline.dtx}
%</driver>
%<package>\NeedsTeXFormat{LaTeX2e}[1999/12/01]
%<package>\ProvidesPackage{moderntimeline}
%<*package>
[2020/06/11 0.11 Add timelines to moderncv entries]
%</package>
%
%<*driver>
\documentclass{ltxdoc}
\usepackage{moderntimeline}[2020/06/11]
\EnableCrossrefs
\CodelineIndex
\RecordChanges
\begin{document}
\DocInput{moderntimeline.dtx}
\PrintChanges
\PrintIndex
\end{document}
%</driver>
% \fi
%
% \CheckSum{413}
%
% \CharacterTable
% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
% Digits \0\1\2\3\4\5\6\7\8\9
% Exclamation \! Double quote \" Hash (number) \#
% Dollar \$ Percent \% Ampersand \&
% Acute accent \' Left paren \( Right paren \)
% Asterisk \* Plus \+ Comma \,
% Minus \- Point \. Solidus \/
% Colon \: Semicolon \; Less than \<
% Equals \= Greater than \> Question mark \?
% Commercial at \@ Left bracket \[ Backslash \\
% Right bracket \] Circumflex \^ Underscore \_
% Grave accent \` Left brace \{ Vertical bar \|
% Right brace \} Tilde \~}
%
%
% \changes{0.11}{2020/06/11}{Add support for timeline bar marks, thanks to jordieh}
% \changes{0.10}{2019/03/04}{Add support to specify label for end date, thanks to ypid and Astrinus}
% \changes{0.9}{2015/08/31}{Add month support, thanks to Astrinus}
% \changes{0.8}{2015/02/25}{Add the tlsetnotshadedfraction command, thanks to Stefano Gronchi}
% \changes{0.7}{2012/04/26}{Various fixes by Jake to allow fractional years in tllabelcventry}
% \changes{0.6}{2012/01/17}{Fix compatibility with moderncv 0.15.1}
% \changes{0.5}{2011/11/15}{Fix positions in tlcventry and tldatecventry, add tltextsingle, thanks to St��phane Dupille}
% \changes{0.4}{2011/10/02}{Add firstyear and lastyear options}
% \changes{0.3}{2011/09/29}{Bugfix: initialize tlsince}
% \changes{0.2}{2011/09/29}{Add tlsince and options for tltext*}
% \changes{0.1}{2011/09/28}{Initial release}
%
% \DoNotIndex{\newcommand,\newenvironment}
%
% \providecommand*{\url}{\texttt}
% \GetFileInfo{moderntimeline.dtx}
% \title{The \textsf{moderntimeline} package}
% \author{Rapha��l Pinson \\ \url{raphink@gmail.com}}
% \date{\fileversion~from \filedate}
%
% \maketitle
%
% \section{Introduction}
%
% As I was reworking my CV (which uses \textsf{moderncv}),
% the thought came to me that instead of just putting
% dates in front of each entries, it would be nice to have
% timelines to make them more graphical and get a better
% grasp of the time span of each entry.
%
% After playing a bit, I asked a question on
% stackexchange.com\footnote{\url{http://tex.stackexchange.com/questions/29725/putting-a-timeline-for-dates-in-moderncv}}
% and adapted the answer provided by Jake\footnote{\url{http://tex.stackexchange.com/users/2552/jake}}
% and turned it into this package.
%
% \section{Usage}
%
% This package is to be used together with the \textsf{moderncv} class,
% and can be loaded with:
%
% \begin{verbatim}
% \usepackage[firstyear=1999,lastyear=2012,
% marksyr=0.4ex,marksmo=0.2ex
% ]{moderntimeline}
% \end{verbatim}
%
% The \texttt{firstyear} and \texttt{lastyear} options indicate the maximum dates used
% to calibrate the time line. They are not mandatory and can be set later
% by means of the |\ltmaxdates| macro.
% The \texttt{marksyr} and \texttt{marksmo} options behave exactly the same as
% the |\tlenablemarksyr| and |\tlenablemarksmo| (and associated) macros.
%
% \subsection{Settings}
%
% Before you typeset entries, you need to adjust
% the settings for this package.
%
% \DescribeMacro{\tlwidth}
% You can optionally set the width of the time line
% by calling |\tlwidth| with a dimension.
%
% \DescribeMacro{\tlrunningwidth}
% For each entry, a running line is traced behind the
% time line. You can set the width of this line by
% means of the |\tlrunningwidth| macro.
%
% \DescribeMacro{\tlrunningcolor}
% To set the color of the running line placed behind
% the time line, you can use the |\tlrunningcolor| macro.
%
% \DescribeMacro{\tltextstart}
% If you wish to set the size of the start date label,
% you can do so by using |\tltextstart|, passing it
% a text size macro.
%
% It also takes an optional first argument to set the
% position of the label, for example if you wish
% to center the label on the start of the line
% and set the text size to |\scriptsize|:
%
% \begin{verbatim}
% \tltextstart[base]{\scriptsize}
% \end{verbatim}
%
%
% \DescribeMacro{\tltextend}
% If you wish to set the size of the end date label,
% you can do so by using |\tltextend|, passing it
% a text size macro.
%
% It also takes an optional first argument to set the
% position of the label, for example if you wish
% to center the label on the start of the line
% and set the text size to |\scriptsize|:
%
% \begin{verbatim}
% \tltextend[base]{\scriptsize}
% \end{verbatim}
%
%
% \DescribeMacro{\tltextsingle}
% If you wish to set the size of single date labels,
% you can do so by using |\tltextsingle|, passing it
% a text size macro.
%
% For example if you wish to set the text size to
% |\scriptsize|:
%
% \begin{verbatim}
% \tltextsingle{\scriptsize}
% \end{verbatim}
%
%
% \DescribeMacro{\tltext}
% You can set the sizes of both the start and end dates
% by calling the |\tltext| macro with a text size macro.
%
%
% \DescribeMacro{\tlmaxdates}
% Before you can typeset any entry, you need to specify
% the maximal range of dates which will serve as a reference.
% This range will be mapped to the width of the left column,
% and dates will be positionned accordingly.
% To set the range, use the |\tlmaxdates| macro, passing it
% the first and last dates you will be using:
%
% \begin{verbatim}
% \tlmaxdates{1999}{2012}
% \end{verbatim}
%
% If you are going to use the last date of the range
% as a start date or a unique date for an entry,
% you should probably set the max date a bit higher
% to prevent the date label from overflowing into
% the entry text.
%
% Since version 0.4, you can set these dates by passing the
% \texttt{firstyear} and \texttt{lastyear} options to the package.
%
%
% \DescribeMacro{\tlsince}
% When using a date range without an end year,
% you might want to add "Since" in front of the starting year.
% In order to do this, you can use the |\tlsince| macro:
%
% \begin{verbatim}
% \tlsince{Since~}
% \end{verbatim}
%
% \DescribeMacro{\tlsetnotshadedfraction}
% If last year in |\tlcventry| and |\tllabelcventry| is 0, the bar
% is shaded. With this command you control the fraction of the bar
% that is not shaded (default = 0):
%
% \begin{verbatim}
% \tlsetnotshadedfraction{0.4} % The first 40% of the bar is not shaded
% \end{verbatim}
%
%
% \DescribeMacro{\tlenablemonths}
% If you want to use months when drawing bars with |\tlcventry| and
% |\tllabelcventry|, issue this command. This feature is not enabled
% by default since it changes the way the bar are drawn if the month
% is not specified.
%
% \DescribeMacro{\tldisablemonths}
% This macro (default behaviour) does not in fact ignore months, but
% retain the historical behaviour of this package to draw the bars at
% the beginning of the year, so is not advisable to use months in dates.
% Default.
%
% \DescribeMacro{\tlenablemarksmo}
% This macro places vertical lines on the timeline bar at every month and year.
% You can set the height of the marks with |\tlmarkheightmo| (default = 0.2ex).
%
% \DescribeMacro{\tlenablemakrsyr}
% This macro places vertical lines on the timeline bar at every year.
% You can set the height of the marks with |\tlmarkheightyr| (default = 0.4ex).
%
% \DescribeMacro{\tldisablemarksyr}
% Disables the vertical lines marking years on the timeline bar.
% This is the opposite of |\tlenablemarksyr|.
%
% \DescribeMacro{\tldisablemarksmo}
% Disables the vertical lines marking months and years on the timeline bar.
% This is the opposite of |\tlenablemarksmo|.
%
% \subsection{CV entries}
%
% This package provides new CV entry commands
% for the \textsf{moderncv} class.
% They are described in this section.
%
%
% \DescribeMacro{\tlcventry}
% The |\tlcventry| macro lets you typeset
% a date range.
% In addition to the standard CV entry, one option
% and two mandatory arguments are added:
%
% \begin{verbatim}
% \tlcventry{1999}{2002}{WYSIWYG User}{Unnamed Company}
% {Somewhere}{}{Tried hard to typeset documents}
% \tlcventry[blue]{2002}{0}{Happy TeXnician}{Any Company}
% {Anywhere}{}{Achieved nice typography and shared code with friends}
% \end{verbatim}
%
% The option sets the color of the time line.
% If unset, the color defaults to the theme color of the CV.
%
% The two arguments added in the beginning of the call
% are the start and end dates for the entry.
% If the position is still held, use \texttt{0} as the end date.
% This will add a gradient at the end of the time line.
%
% You can also specify months (which are used only for adjusting the bar length:
% they are not shown in the labels), separated by a slash from the year:
%
% \begin{verbatim}
% \tlcventry{1999/2}{2002/6}{WYSIWYG User}{Unnamed Company}
% {Somewhere}{}{Tried hard to typeset documents}
% \tlcventry[blue]{2002/8}{0}{Happy TeXnician}{Any Company}
% {Anywhere}{}{Achieved nice typography and shared code with friends}
% \end{verbatim}
%
% Don't use a leading zero, since this make PGF think the number is in octal,
% so it complains when sees \texttt{08} and \texttt{09}.
%
%
% \DescribeMacro{\tllabelcventry}
% The |\tllabelcventry| macro is similar to |\tlcventry|,
% but it takes yet a third additional argument, which lets you
% set a label for the time line.
% When this is used, the dates are not typeset around the time line,
% only the label is placed where the start date would normally be.
%
% This is useful when your dates contain month names, or if the
% time span is too short to properly typeset the dates above
% and under the time line:
%
% \begin{verbatim}
% \tllabelcventry[magenta]{2002}{2003}{July--November 2002}
% {Scribus Student}{GNU School}
% {The Internet}{}{Tried Scribus for a short while}
% \end{verbatim}
%
% It is also possible to place a label where the end date would by making use
% of the separator |///|:
%
% \begin{verbatim}
% \tllabelcventry[magenta]{2002}{2003}{July///November 2002}
% {Scribus Student}{GNU School}
% {The Internet}{}{Tried Scribus for a short while}
% \end{verbatim}
%
% You can enter months for adjusting bar length as in |\tlcventry|.
%
%
% \DescribeMacro{\tldatecventry}
% Positions usually last long enough to draw time lines,
% but there are also punctual entries, such as diplomas.
% The |\tldatecventry| lets to typeset unique dates.
% It places a bullet on the date and typesets the date above it:
%
% \begin{verbatim}
% \tldatecventry[brown]{2011}{Trusted TeX.SX user}{}{tex.stackexchange.com}
% {The Internet}{}{Achived 20k reputation on TeX.SX}
% \end{verbatim}
%
%
% \DescribeMacro{\tldatelabelcventry}
% Similarly to |\tllabelcventry|, you might want to place
% a label on a unique date entry, such as an exact date
% or a month. The |\tldatelabelcventry| provides a parameter to achive this:
%
% \begin{verbatim}
% \tldatelabelcventry[brown]{2011}{Christmas 2011}{Happy TeXer}{}{Home}
% {Townville}{}{Received Don Knuth's \emph{3:16} as a gift.}
% \end{verbatim}
%
%
% \StopEventually{}
%
% \section{Implementation}
%
% \iffalse
%<*package>
% \fi
%
% \begin{macrocode}
\ProvidesPackage{moderntimeline}
\RequirePackage{tikz}
\RequirePackage{kvoptions}
\SetupKeyvalOptions{
family=moderntimeline,
prefix=tl@,
}
\DeclareStringOption{firstyear}
\DeclareStringOption{lastyear}
\DeclareStringOption{marksmo}[0.2ex]
\DeclareStringOption{marksyr}[0.4ex]
\ProcessKeyvalOptions*
\newif\ifstartyear
\newif\ifissince
% \end{macrocode}
%
% \begin{macro}{\tlwidth}
% \begin{macrocode}
\newcommand{\tlwidth}[1]{%
\def\tl@width{#1}
\pgfmathsetmacro\tl@textstartabove{\tl@width+1pt}
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\tlrunningwidth}
% \begin{macrocode}
\newcommand{\tlrunningwidth}[1]{%
\def\tl@runningwidth{#1}
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\tlrunningcolor}
% \begin{macrocode}
\newcommand{\tlrunningcolor}[1]{%
\def\tl@runningcolor{#1}
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\tlmarkheightmo}
% \begin{macrocode}
\newcommand{\tlmarkheightmo}[1]{%
\def\tl@marksmo{#1}
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\tlmarkheightyr}
% \begin{macrocode}
\newcommand{\tlmarkheightyr}[1]{%
\def\tl@marksyr{#1}
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\tlsince}
% \begin{macrocode}
\newcommand{\tlsince}[1]{%
\def\tl@since{#1}
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\tltextstart}
% \begin{macrocode}
\newcommand{\tltextstart}[2][base west]{%
\tikzset{
tl@startyear/.style={
font=#2,
name=tl@startyear,
above=\tl@textstartabove,
inner xsep=0pt,
anchor=#1,
}
}
}
% \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\tltextend}
% \begin{macrocode}
\newcommand{\tltextend}[2][north east]{%
\tikzset{
tl@endyear/.style={
font=#2,
name=tl@endyear,
below,
inner xsep=0pt,
anchor=#1,
}
}
}
% \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\tltextsingle}
% \begin{macrocode}
\newcommand{\tltextsingle}[1]{%
\tikzset{
tl@singleyear/.style={
font=#1,
name=tl@singleyear,
above=1pt,
inner xsep=0pt,
}
}
}
% \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\tltext}
% \begin{macrocode}
\newcommand{\tltext}[1]{%
% \end{macrocode}
% \begin{macrocode}
\tltextstart{#1}%
\tltextend{#1}%
\tltextsingle{#1}%
}
% \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\tlsetnotshadedfraction}
% \begin{macrocode}
\newcommand{\tlsetnotshadedfraction}[1]{%
\def\tl@nsfrac{#1}
}
% \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\tlenablemonths}
% \begin{macrocode}
\newcommand{\tlenablemonths}{%
\def\tl@nomonthvalue{6}
}
% \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\tldisablemonths}
% \begin{macrocode}
\newcommand{\tldisablemonths}{%
\def\tl@nomonthvalue{0}
}
% \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\tldisablemarksyr}
% \begin{macrocode}
\newcommand{\tldisablemarksyr}{%
\def\tl@marksyr{}
}
% \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\tlenablemarksyr}
% \begin{macrocode}
\newcommand{\tlenablemarksyr}{%
\def\tl@marksyr{0.4ex}
}
% \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\tldisablemarksmo}
% \begin{macrocode}
\newcommand{\tldisablemarksmo}{%
\def\tl@marksmo{}
}
% \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\tlenablemarksmo}
% \begin{macrocode}
\newcommand{\tlenablemarksmo}{%
\def\tl@marksmo{0.2ex}
}
% \end{macrocode}
% \end{macro}
%
%
% Defaults
% \begin{macrocode}
\tltext{\scriptsize}
\tlwidth{0.8ex}
\tlrunningwidth{0.05ex}
\tlrunningcolor{gray}
\tlsince{}
\tlsetnotshadedfraction{0}
\tldisablemonths
% \end{macrocode}
%
%
% \begin{macro}{\tlmaxdates}
% \begin{macrocode}
\newcommand{\tlmaxdates}[2]{%
\def\tl@firstyear{#1}
\def\tl@lastyear{#2}
\pgfmathsetmacro\tl@yearrange{\tl@lastyear-\tl@firstyear}
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\tl@yearfraction}
% \begin{macrocode}
\newcommand{\tl@yearfraction}[1]{% Month 1 - 12 -> 0 - 11
\gdef\tl@tmpyear{-1}% Resetting
\gdef\tl@tmpmonth{-1}%
\begingroup%
\edef\@tempa{#1/}%
\expandafter\endgroup\expandafter\tl@yearfraction@auxi\@tempa\@nnil%
\ifstartyear
\pgfmathsetmacro\tl@startyear{\tl@tmpyear+(\tl@tmpmonth-1)/12}%
\else
\ifnum\tl@tmpyear=0
\pgfmathsetmacro\tl@endyear{\tl@lastyear}%
\issincetrue%
\else
\pgfmathsetmacro\tl@endyear{\tl@tmpyear+\tl@tmpmonth/12}%
\issincefalse%
\fi
\fi
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\tl@yearfraction@auxi}
% \begin{macrocode}
\newcommand{\tl@yearfraction@auxi}[2]{}
\def\tl@yearfraction@auxi#1/#2\@nnil{%
\ifnum\tl@tmpyear<0 % First call
\pgfmathsetmacro\tl@tmpyear{+#1}%
\ifx\@nnil#2\@nnil
\pgfmathsetmacro\tl@tmpmonth{+\tl@nomonthvalue}%
\else
\expandafter\tl@yearfraction@auxi#2\@nnil%
\fi
\else
\pgfmathsetmacro\tl@tmpmonth{#1}%
\fi
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\tl@tlcvbar}
% \begin{macrocode}
\newcommand{\tl@tlcvbar}{
\pgfmathsetmacro\tl@yearrange{\tl@lastyear-\tl@firstyear}
\pgfmathsetmacro\tl@totalmonths{12*\tl@yearrange}%
\pgfmathsetmacro\tl@tickdistmo{\hintscolumnwidth/\tl@totalmonths}%
\pgfmathsetmacro\tl@tickdistyr{\hintscolumnwidth/\tl@yearrange}%
\useasboundingbox (0,-1.5ex) rectangle (\hintscolumnwidth,1ex);
\fill [\tl@runningcolor] (0,0)
rectangle (\hintscolumnwidth,\tl@runningwidth);
\ifx\tl@marksyr\empty\relax\else
\foreach \x in {0, ..., \tl@yearrange}
\draw [\tl@runningcolor](\x*\tl@tickdistyr pt,0ex) -- (\x*\tl@tickdistyr pt,\tl@marksyr);
\fi
\ifx\tl@marksmo\empty\relax\else
\foreach \x in {0, ..., \tl@totalmonths}
\draw [\tl@runningcolor](\x*\tl@tickdistmo pt,0ex) -- (\x*\tl@tickdistmo pt,\tl@marksmo);
\fi
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\tl@splitlabels}
% \begin{macrocode}
\newcommand{\tl@splitlabels}[1]{
\gdef\tl@startlabel{}% Resetting
\begingroup%
\edef\@tempa{#1///}%
\expandafter\endgroup\expandafter\tl@splitlabels@auxi\@tempa\@nnil%
\ifx\tl@startlabel\empty\relax%
\gdef\tl@startlabel{#1}
\fi
\ifissince%
\xdef\tl@startlabel{\tl@since \tl@startlabel}
\fi
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\tl@splitlabels@auxi}
% \begin{macrocode}
\newcommand{\tl@splitlabels@auxi}[2]{}
\def\tl@splitlabels@auxi#1///#2\@nnil{%
\ifx\tl@startlabel\empty\relax% First call
\gdef\tl@startlabel{#1}
\ifx\@nnil#2\@nnil
\gdef\tl@startlabel{}
\else
\expandafter\tl@splitlabels@auxi#2\@nnil%
\fi
\else
\gdef\tl@endlabel{#1}
\fi
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\tl@formatstartyear}
% \begin{macrocode}
\newcommand{\tl@formatstartyear}[1]{
\startyeartrue
\tl@yearfraction{#1}
\pgfmathsetmacro\tl@startfraction{(\tl@startyear-\tl@firstyear)/(\tl@lastyear-\tl@firstyear)}%
\ifissince
\xdef\tl@startlabel{\tl@since \tl@tmpyear}
\else
\xdef\tl@startlabel{\tl@tmpyear}
\fi
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\tl@formatendyear}
% \begin{macrocode}
\newcommand{\tl@formatendyear}[1]{
\startyearfalse%
\tl@yearfraction{#1}
\pgfmathsetmacro\tl@endfraction{(\tl@endyear-\tl@firstyear)/(\tl@lastyear-\tl@firstyear)}%
\ifissince%
\xdef\tl@endlabel{}
\else
\xdef\tl@endlabel{\tl@tmpyear}
\fi
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\tldatelabelcventry}
% \begin{macrocode}
\newcommand{\tldatelabelcventry}[8][color1]{%
% \end{macrocode}
% \begin{macrocode}
\issincefalse
\tl@formatstartyear{#2}
\cventry{\tikz[baseline=0pt]{
\tl@tlcvbar
\fill [#1] (0,0)
++(\tl@startfraction*\hintscolumnwidth,0pt)
node [tl@startyear] {#3}
node {$\bullet$};
}
}
{#4}{#5}{#6}{#7}{#8}
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\tldatecventry}
% \begin{macrocode}
\newcommand{\tldatecventry}[7][color1]{%
% \end{macrocode}
% \begin{macrocode}
\issincefalse
\tl@formatstartyear{#2}
\cventry{\tikz[baseline=0pt]{
\tl@tlcvbar
\fill [#1] (0,0)
++(\tl@startfraction*\hintscolumnwidth,0pt)
node [tl@singleyear] {#2}
node {$\bullet$};
}%
}%
{#3}{#4}{#5}{#6}{#7}%
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\tlcventry}
% \begin{macrocode}
\newcommand{\tlcventry}[8][color1]{%
% \end{macrocode}
% \begin{macrocode}
\tl@formatendyear{#3}
\tl@formatstartyear{#2}
\cventry{\tikz[baseline=0pt]{
\tl@tlcvbar
\fill [#1] (0,0)
++(\tl@startfraction*\hintscolumnwidth,0pt)
node [tl@startyear] {\tl@startlabel}
rectangle (\tl@endfraction*\hintscolumnwidth,\tl@width-1pt)
node [tl@endyear] {\tl@endlabel}
(\hintscolumnwidth,0pt) ;
\ifissince
\newdimen\fullcolorwidth
\pgfmathsetlength\fullcolorwidth{\tl@startfraction*(1+(1-\tl@startfraction)*\tl@nsfrac)*\hintscolumnwidth}
\shade [left color=#1,right color=#1]
(\tl@startfraction*\hintscolumnwidth,0)
rectangle (\fullcolorwidth,\tl@width);
\shade [left color=#1] (\fullcolorwidth,0)
rectangle (\tl@endfraction*\hintscolumnwidth + 1,\tl@width);
\else
\fill [#1] (\tl@startfraction*\hintscolumnwidth,0)
rectangle (\tl@endfraction*\hintscolumnwidth,\tl@width);
\fi
}%
}%
{#4}{#5}{#6}{#7}{#8}%
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\tllabelcventry}
% \begin{macrocode}
\newcommand{\tllabelcventry}[9][color1]{%
% \end{macrocode}
% \begin{macrocode}
\tl@formatendyear{#3}
\tl@formatstartyear{#2}
\tl@splitlabels{#4}
\cventry{\tikz[baseline=0pt]{
\tl@tlcvbar
\fill [#1] (0,0)
++(\tl@startfraction*\hintscolumnwidth,0pt)
node [tl@startyear] {\tl@startlabel}
rectangle (\tl@endfraction*\hintscolumnwidth,\tl@width-1pt)
node [tl@endyear] {\tl@endlabel}
(\hintscolumnwidth,0pt) ;
\ifissince
\newdimen\fullcolorwidth
\pgfmathsetlength\fullcolorwidth{\tl@startfraction*(1+(1-\tl@startfraction)*\tl@nsfrac)*\hintscolumnwidth}
\shade [left color=#1,right color=#1]
(\tl@startfraction*\hintscolumnwidth,0)
rectangle (\fullcolorwidth,\tl@width);
\shade [left color=#1] (\fullcolorwidth,0)
rectangle (\tl@endfraction*\hintscolumnwidth,\tl@width);
\else
\fill [#1] (\tl@startfraction*\hintscolumnwidth,0)
rectangle (\tl@endfraction*\hintscolumnwidth,\tl@width);
\fi
}
}
{#5}{#6}{#7}{#8}{#9}%
}
% \end{macrocode}
% \end{macro}
%
% \iffalse
%</package>
% \fi
%
% \Finale
\endinput