%
% \iffalse
%%
%% Source File `typehtml.dtx'.
%% Copyright (C) 1996 1997 David Carlisle
%% This file may be distributed under the terms of the LPPL.
%% See 00readme.txt for details.
%%
%
%<*dtx>
\ProvidesFile{typehtml.dtx}
%</dtx>
%<package>\NeedsTeXFormat{LaTeX2e}[1995/06/01]
%<package>\ProvidesPackage{typehtml}
%<driver>\ProvidesFile{typehtml.drv}
% \fi
% \ProvidesFile{typehtml.dtx}
[1997/11/19 v0.12 HTML printer (DPC)]
%
% \iffalse
%<*driver>
\documentclass{ltxdoc}
\usepackage[html3,subsection*,bigint]{typehtml}
\DocInput{typehtml.dtx}
\end{document}
%</driver>
% \fi
%
% \GetFileInfo{typehtml.dtx}
% \begin{document}
% \title{The \textsf{typehtml} package\thanks{This file
% has version number \fileversion, last
% revised \filedate.}}
% \author{David Carlisle}
% \date{\filedate}
%
% \changes{v0.01}{1996/03/06}{Initial version}
% \changes{v0.02}{1996/03/07}{Fiddling}
% \changes{v0.03}{1996/03/08}{HTML3 maths}
% \changes{v0.05}{1996/03/11}
% {change name to prevent clash with html package in latex2html}
% \changes{v0.11}{1996/03/28}{Minor improvements}
% \changes{v0.12}{1997/11/29}{Assorted changes for Bernard Gaulle, active
% french punctuation}
% \maketitle
%
% \CheckSum{2283}
%
% \section{Intoduction}
%
% This package enables the processing of HTML codes. The
% \verb|\dohtml| command
% allows fragments of HTML to be placed within a \LaTeX\
% document,
%\begin{verbatim}
% \dohtml
% <html>
% html markup ...
% </html>
%\end{verbatim}
% The \verb|<html>|\ldots\verb|</html>| is \emph{required}. (It is
% anyway a good idea to have these tags in an HTML document.)
%
% The \verb|\htmlinput| command is similar, but takes a file
% name as argument. In that case the file need not necessarily start
% and end with \verb|<html>|\ldots\verb|</html>|.
%
% This package covers most of the HTML2 DTD, together with the
% mathematics extensions from HTML3.\footnote
% {The draft specification of HTML3 has expired, and the W3C group
% are currently devising a new proposed extension of HTML, so the
% mathematics typesetting part of this package may need substantial
% revision once a final specification of the HTML mathematics markup
% is agreed.}
% The rest of HTML3 may be added at a later date.
%
% Its current incarnation has not been extensively tested, having been
% thrown together during the last couple of weeks in response to a
% question on \texttt{comp.text.tex} about the availability of such a
% package.
%
% The package falls into three sections. Firstly the options section
% allows a certain amount of customisation, and enabling of
% extensions. Not all these options are fully operational at present.
% Secondly comes a section that implements a kind of SGML parser. This
% is not a real conforming SGML parser (not even a close approximation
% to such a thing!) The assumption (sadly false in the anarchic WWW)
% is that any document will have been validated by a conforming SGML
% parser before it ever gets to the stage of being printed by this
% package. Finally are a set of declarations that essentially map the
% declarations of the HTML DTD into \LaTeX\ constructs.
%
% \section{Options}
%
% \subsection{HTML Level}
% The options \texttt{html2} (the default) and \texttt{html3} control
% HTML variant supported. Using the \texttt{html3} option will use up a
% lot more memory to support the extra features, and the math entity
% (symbol) names. Against my better judgement there is also a
% \texttt{netscape} option to allow some of the non-HTML tags accepted
% by that browser.
%
% \subsection{Headings}
% The six options \texttt{chapter}, \texttt{chapter*}, \texttt{section},
% \texttt{section*}, \texttt{subsection} and \texttt{subsection*}
% Determine to which \LaTeX\ sectional command the HTML element
% \texttt{h1} is mapped. (\texttt{h2}--\texttt{h6} will
% automatically follow suit.) The default is \texttt{section*}.
%
% \subsection{Double Quote Handling}
% Most HTML pages use |"| as as a quotation mark in text, for
% example:
%\begin{verbatim}
% quoted "like this" example
%\end{verbatim}
%
% This slot in the ISO latin-1 encoding is for `straight' double
% quotes. Unfortunately the Standard \TeX\ fonts in the OT1 encoding
% do not have such a character, only left and right quotes, ``like
% this''. By default this package uses the \texttt{straightquotedbl}
% option which uses the \LaTeX\ command |\textquotedbl| to render
% |"|. If used with the T1 encoded fonts |\usepackage[T1]{fontenc}|
% then the straight double quote from the current font is used. With
% OT1 fonts, the double quote is taken from the |\ttfamily| font,
% which looks \texttt{"}like this\texttt{"} which is fairly
% horrible, but better than the alternative which is ''like this''.
%
% The \texttt{smartquotedbl} option redefines |"| so that it produces
% alternatively an open double quote `` then a close ''. As there is a
% chance of it becoming confused, it is reset to `` at the beginning
% of every paragraph, whatever the current mode.
%
% Neither of these options affects the use of |"| as part of the SGML
% syntax to surround attribute values.
%
% In principle the package ought to have similar options dealing with
% the single quote, but there the situation is more complicated due to
% its dual use as an apostrophe, so currently the package takes no
% special precautions: all single quotes are treated as a closing
% quote/apostrophe. Also the conventions of `open' and `close' quotes
% only really apply to English. If someone wants to suggest what the
% package should do with |"| in other languages\ldots
%
% \subsection{Images}
% The default option is \texttt{imgalt} This means that all inline
% images (the HTML \texttt{img} element) are replaced by the text
% specified by the \texttt{alt} attribute, or \textsf{[image]} if no
% such attribute is specified.
%
% The \texttt{imggif} option\footnote{one day} uses the
% \verb|\includegraphics| command so that inline images appear as
% such in the printed version.
%
% The \texttt{imgps} option\footnotemark[1] is similar to
% \texttt{imggif} but first replaces the extension \texttt{.gif} at
% the end of the source file name by \texttt{.ps}. This will enable
% drivers that can not include GIF files to be used, as long as the
% user keeps the image in both PostScript and Gif formats.
%
% \subsection{Hyperref}
%
% Several options control how the HTML anchor tag is treated.
%
% The default \texttt{nohyperref} option ignores name anchors, and
% typesets the body of src anchors using |\emph|.
%
% The \texttt{ftnhyperref} option is similar to \texttt{nohyperref},
% but adds a footnote showing the destination address of each link,
% as specified by the SRC attribute.
%
% If the \texttt{hyperref} option is specified, the hypertext markup
% in the HTML file will be replicated using the
% hypertext specials of the Hyper\TeX\ group. If in addition the
% \textsf{hyperref} package is loaded, the extra features of that
% package may be used, for instance producing `native PDF' specials
% for direct use by Adobe distiller rather than producing the specials
% of the hyper\TeX\ conventions.
%
% The \texttt{dviwindo} option converts the hypertext information in
% the HTML into the |\special| conventions of Y\&Y's \emph{dviwindo}
% previewer for Microsoft Windows.
%
% \subsection{Big Integrals}
% \LaTeX\ does not treat integral signs as variable sized symbols,
% in the way that it treats delimiters such as brackets. In common
% with summation signs and a few other operators, they come in
% just two fixed sizes, a small version for inline mathematics, and a
% large version used in displays. In fact by default \LaTeX\ always
% uses the same two sizes (from the 10\,pt math extension font) even if
% the document class has been specified with a size option such as
% \texttt{12pt}, or if a size command such as |\large| has been used.
%
% The standard \textsf{exscale} package loads the math extension font
% at larger sizes if the current font size is larger than 10\,pt.
%
% The HTML3 math description explicitly states that integral signs
% should be treated like delimiters and stretch if applied to a large
% math expression. By default this package ignores this advice and
% treats integral signs in the standard way, however an option
% \texttt{bigint} does cause integral signs to `stretch' (or at least
% be taken from a suitably large font). The standard Computer Modern
% fonts use a very `sloped' integral which means that they are
% not really suitable for being stretched. Some other math fonts, for
% instance Lucida, have more vertical integral signs, and one could
% imagine in those cases making an integral sign with a `repeatable'
% vertical middle section so that it could grow to an arbitrary size, in
% the way that brackets grow.
%
% \section{Latin-1 characters}
% The SGML character entities for the ISO-Latin1 characters such as
% \texttt{\é} are recognised by this style, although as usual,
% some of them such as the Icelandic thorn character,
% \texttt{\þ}, \verb|\th|, produce an error if the old `OT1'
% encoded fonts are being used. These characters will print correctly
% if `T1' encoded fonts are used, for example by declaring
% \verb|\usepackage[T1]{fontenc}|~.
%
% HTML also allows direct 8-bit input of characters according to the
% ISO-latin1 encoding, to enable this you need to enable latin-1 input
% for \LaTeX\ with a declaration such as
% \verb|\usepackage[latin1]{inputenc}|~.
%
% \section{Mathematics}
% The HTML3 MATH element is fairly well supported, including the BOX
% and CLASS attributes. (Currently only CHEM value for class is
% supported, and as far as I can see the BOX attribute is only in the
% report, not in the dtd.) The super and subscripts are supported,
% including the shortref maps, however only the default right
% alignment is
% implemented so far. The convention described in the draft report
% for using white space to distinguish superscript positioning is
% fairly \emph{horrible}!
%
%
% The documentation that I could find on HTML3 did not include a full
% list of the entity names to be used for the symbols. This
% package currently \emph{only} defines the following entities, which
% should be enough for testing purposes at least.
%
% \begin{itemize}
% \item
% |gt| ($>$) |lt| ($<$) (Already in the HTML2 DTD)
%
% \item
% Some Greek letters.
%
% |alpha| ($\alpha$)
% |beta| ($\beta$)
% |gamma| ($\gamma$)
% |Gamma| ($\Gamma$)
%
% \item
% Integral and Sum. $\int$ grows large if the \texttt{bigint} package
% option is given.
%
% |int| ($\int$)
% |sum| ($\sum$)
%
% \item
% Braces (The delimiters ()[] also stretch as expected in the BOX
% element)
%
% |lbrace| ($\lbrace$)
% |rbrace| ($\rbrace$)
%
% \item
% A random collection of mathematical symbols:
%
% |times| ($\times$)
% |cup| ($\cup$)
% |cap| ($\cap$)
% |vee| ($\vee$)
% |wedge| ($\wedge$)
% |infty| ($\infty$)
% |oplus| ($\oplus$)
% |ominus| ($\ominus$)
% |otimes| ($\otimes$)
%
% \item
% A Minimal set of trig functions:
%
% |sin| ($\sin$)
% |cos| ($\cos$)
% |tan| ($\tan$)
%
% \item
% Also in the special context as attributes to ABOVE and BELOW elements
% the entities:
%
% |overbrace| ($\overbrace{\quad}$)
% |underbrace| ($\underbrace{\quad}$) and any (\TeX) math accent name.
%
% \end{itemize}
%
% \section{SGML Minimisation features}
% SGML (and hence HTML) support various minimisation features that aim
% to make it easier to enter the markp `by hand'. These features make
% the kind of `casual' attempt at parsing SGML as implemented in this
% package somewhat error prone.
%
% Two particular features are enabled in HTML. The so called SHORTTAG
% feature means that the name of a tag may be omitted if it may be
% inferred from the context. Typically in HTML this is used in
% examples like
%\begin{verbatim}
% <title>A Document Title</>
%\end{verbatim}
% The end tag is shortened to |</>| and the system infers that
% TITLE is the element to be closed.
%
% The second form of minimisation enabled in HTML is the OMITTAG
% feature. Here a tag may be omitted altogether in certain
% circumstances.
% A typical example is the HTML list, where each list item is started
% with |<li>| but the closing |</li>| at the end of the item may be
% omitted and inferred by the following |<li>| or |</ol>| tag.
%
% This package is reasonably robust with respect to omitted
% tags. However it only makes a half hearted attempt at supporting the
% SHORTTAG feature. The TITLE example above would work, but nested
% elements, with multiple levels of minimised end tags will probably
% break this package.
%
% It would be possible to build a \LaTeX\ system that had full
% knowledge of the HTML (or any other) DTD and in particular the
% `content model' of every element, this would produce a more robust
% parsing system but would take longer than I was prepared to
% spend this week\ldots\ In anycase if you need a fully conforming SGML
% parser, it probably makes sense to use an existing one (excellent
% free parsers are freely available) and then convert the output of
% the parser to a form suitable for \LaTeX. In that way all such
% concerns about SGML syntax features such as minimisation will have
% been resolved by the time \LaTeX\ sees the document.
%
% \section{Examples}
% \let\olddohtml\dohtml
% \def\dohtml{\olddohtml\MakePercentIgnore}
%
%
% \subsection{A section}
% This document uses the \texttt{subsection*} option.
%\begin{verbatim}
% <h1>HTML and LaTeX</h1>
%\end{verbatim}
% \dohtml
% <html>
% <h1>HTML and LaTeX</h1>
% </html>
%
% \subsection{An itemised list}
%\begin{verbatim}
% <ul>
% <li> something
% <li> something else
% </ul>
%\end{verbatim}
% \dohtml
% <html>
% <ul>
% <li> something
% <li> something else
% </ul>
% </html>
%
% \subsection{Latin1 Characters}
%\begin{verbatim}
% é ö
%\end{verbatim}
% \dohtml
% <html>
% é ö
% </html>
%
% \subsection{Images}
% Currently only the ALT attribute is supported.
%\begin{verbatim}
% This is an image of me <img alt="DPC" src="dpc.gif">
%\end{verbatim}
% \dohtml
% <html>
% This is an image of me <img alt="DPC" src="dpc.gif">
% </html>
%
% \subsection{A Form}
%\begin{verbatim}
% <form
% action="http://www.cogs.susx.ac.uk/cgi-bin/ltxbugs2html"
% method=get><hr>
% You can search for all the bug reports about: <select name="category">
% <option>AMS LaTeX</option>
% <option>Babel</option>
% <option>Graphics and colour</option>
% <option>LaTeX</option>
% <option selected>Metafont fonts</option>
% <option>PostScript fonts</option>
% <option>Tools</option>
% </select>
% <hr>
% </form>
%\end{verbatim}
% \dohtml
% <html>
% <form
% action="http://www.cogs.susx.ac.uk/cgi-bin/ltxbugs2html"
% method=get><hr>
% You can search for all the bug reports about: <select name="category">
% <option>AMS LaTeX</option>
% <option>Babel</option>
% <option>Graphics and colour</option>
% <option>LaTeX</option>
% <option selected>Metafont fonts</option>
% <option>PostScript fonts</option>
% <option>Tools</option>
% </select>
% <hr>
% </form>
% </html>
%
% \subsection{Styles of Mathematics}
%\begin{verbatim}
% <math>
% H_2_O + CO_2_
% </math>
% <math class=chem>
% H_2_O + CO_2_
% </math>
% <math box>
% H_2_O + CO_2_
% </math>
% <math class=chem box>
% H_2_O + CO_2_
% </math>
%\end{verbatim}
% \dohtml
% <html>
% <math>
% H_2_O + CO_2_
% </math>
% <math class=chem>
% H_2_O + CO_2_
% </math>
% <math box>
% H_2_O + CO_2_
% </math>
% <math class=chem box>
% H_2_O + CO_2_
% </math>
% </html>
%
% \subsection{Integrals}
% Stretchy integrals with the \texttt{bigint} option.
%\begin{verbatim}
% <math>
% {∫^1^_3_<left>
% 1
% <over>
% {x+{1<over>x+{2<over>x+
% {3<over>x+{4<over>x}}}}}
% <right>dx}
% </math>
%\end{verbatim}
% \dohtml
% <html>
% <math>
% {∫^1^_3_<left>
% 1
% <over>
% {x+{1<over>x+{2<over>x+
% {3<over>x+{4<over>x}}}}}
% <right><t>d</t> x}
% </math>
% </html>
% And the same integral with the standard integral sign.
% \begingroup
% \makeatletter
% \let\HTML@bigint\int
% \dohtml
% <html>
% <math>
% {∫^1^_3_<left>
% 1
% <over>
% {x+{1<over>x+{2<over>x+
% {3<over>x+{4<over>x}}}}}
% <right><t>d</t>x}
% </math>
% </html>
% \endgroup
%
% \subsection{Oversized delimiters}
%\begin{verbatim}
% <math>
% <box>(<left>1 <atop> 2 <right>)</box>
% <box size=large>(<left>1 <atop> 2 <right>)</box>
% </math>
%\end{verbatim}
% \dohtml
% <html>
% <math>
% <box>(<left>1 <atop> 2 <right>)</box>
% <box size=large>(<left>1 <atop> 2 <right>)</box>
% </math>
% </html>
%
% \subsection{Roots, Overbraces etc}
%\begin{verbatim}
% <math>
% <above sym=overbrace> abc </above><sup>k</sup>
%  
% <root>3<of>x</root>
% <sqrt>5</sqrt>
%  
% <below sym=underline> abc </below>
% <above sym=widehat> abc </above>
% </math>
%\end{verbatim}
% \dohtml
% <html>
% <math>
% <above sym=overbrace> a bc </above><sup>k</sup>
%  
% <root>3<of>x</root>
% <sqrt>5</sqrt>
%  
% <below sym=underline> abc </below>
% <above sym=widehat> abc </above>
% </math>
% </html>
%
% \subsection{Arrays}
%
%\begin{verbatim}
% <math>
% aa<array align=top>
% <row><item><text>first col</text><item><text>second col</text><item>
% <text>third col</text><item><text>fourth col</text>
% <row><item><text>row 2</text><item> a_22_ <item>a_23_<item>a_24_
% <row><item><text>row 3</text><item rowspan=3 colspan=2>
% a_32_-a_53_<item>a_34_
% <row><item><text>row 4</text><item>a_44_
% <row><item><text>row 5</text><item>a_54_
% <row><item><text>row 6</text><item align=left>
% al_62_<item>a_63_<item>a_64_
% <row><item><text>row 7</text><item align=right>
% ar_72_<item>a_73_<item>a_74_
% </array>bb
% </math>
%\end{verbatim}
%
% \dohtml
% <html>
% <math>
% aa<array align=top>
% <row><item><text>first col</text><item><text>second col</text><item>
% <text>third col</text><item><text>fourth col</text>
% <row><item><text>row 2</text><item> a_22_ <item>a_23_<item>a_24_
% <row><item><text>row 3</text><item rowspan=3 colspan=2>
% a_32_-a_53_<item>a_34_
% <row><item><text>row 4</text><item>a_44_
% <row><item><text>row 5</text><item>a_54_
% <row><item><text>row 6</text><item align=left>
% al_62_<item>a_63_<item>a_64_
% <row><item><text>row 7</text><item align=right>
% ar_72_<item>a_73_<item>a_74_
% </array>bb
% </math>
% </html>
%
% Repeat that element, but change the ARRAY attributes as follows:
%\begin{verbatim}
% <array ldelim="(" rdelim=")" labels>
%\end{verbatim}
%
% \dohtml
% <html>
% <math>
% aa<array ldelim="(" rdelim=")" labels>
% <row><item><text>first col</text><item><text>second col</text><item>
% <text>third col</text><item><text>fourth col</text>
% <row><item><text>row 2</text><item> a_22_ <item>a_23_<item>a_24_
% <row><item><text>row 3</text><item rowspan=3 colspan=2>
% a_32_-a_53_<item>a_34_
% <row><item><text>row 4</text><item>a_44_
% <row><item><text>row 5</text><item>a_54_
% <row><item><text>row 6</text><item align=left>
% al_62_<item>a_63_<item>a_64_
% <row><item><text>row 7</text><item align=right>
% ar_72_<item>a_73_<item>a_74_
% </array>bb
% </math>
% </html>
%
% and finally an example of COLSPEC
%\begin{verbatim}
% <math>
% <array colspec="R+C=L">
% <row><item>abc_11_<item>abc_12_<item>abc_13_
% <row><item>a_21_<item>a_22_<item>a_23_
% <row><item>a_31_<item>a_32_<item>a_33_
% </array>
% </math>
%\end{verbatim}
%
% \dohtml
% <html>
% <math>
% <array colspec="R+C=L">
% <row><item>abc_11_<item>abc_12_<item>abc_13_
% <row><item>a_21_<item>a_22_<item>a_23_
% <row><item>a_31_<item>a_32_<item>a_33_
% </array>
% </math>
% </html>
%
% \subsection{Tables}
% HTML3 tables are not yet supported, but there is a minimal ammount to
% catch simple cases.
%
%\begin{verbatim}
% <table>
% <caption>Simple Table</caption>
% <tr><td>one <td> two
% <tr><td>a <td> b
% </table>
%\end{verbatim}
%
% \dohtml
% <html>
% <table>
% <caption>Simple Table</caption>
% <tr><td>one <td> two
% <tr><td>a <td> b
% </table>
% </html>
%
% \StopEventually{}
%
% \section{The Code}
%
% \subsection{Option Handling}
% \begin{macrocode}
%<*package>
% \end{macrocode}
%
% \begin{macrocode}
\DeclareOption{html2}{\let\HTML@two@stop\endinput}
% \end{macrocode}
%
% The |#| here, and in later option code will need doubling
% if you are using a \LaTeX\ before June 95.
% \begin{macrocode}
\DeclareOption{netscape}
{\def\HTML@not#1{\SGML@w{<#1> is not valid HTML}}}
% \end{macrocode}
%
% \begin{macrocode}
\DeclareOption{html3}{\let\HTML@two@stop\relax}
% \end{macrocode}
%
% \changes{v0.08}{1996/03/16}{Add nohyperref option}
% \begin{macrocode}
\DeclareOption{nohyperref}{%
\let\HTML@doname\@secondoftwo
\def\HTML@dosrc#1#2{\emph{#2}}}
% \end{macrocode}
%
% \changes{v0.08}{1996/03/16}{Add ftnhyperref option}
% \begin{macrocode}
\DeclareOption{ftnhyperref}{%
\let\HTML@doname\@secondoftwo
\def\HTML@dosrc#1#2{\emph{#2}\footnote{HREF: \texttt{#1}}}}
% \end{macrocode}
%
% \changes{v0.08}{1996/03/16}
% {make hyperref independent of hyperref package}
% \begin{macrocode}
\DeclareOption{hyperref}{%
\AtBeginDocument{%
\providecommand\href[2]{\special{html:<A href="#1">}%
#2\special{html:</A>}}%
\providecommand\hypertarget[2]{\special{html:<A name="#1">}%
#2\special{html:</A>}}%
\let\HTML@doname\hypertarget
\let\HTML@dosrc\href}}
% \end{macrocode}
%
% \changes{v0.08}{1996/03/16}{Add dviwindo option}
% Dviwindo itself deals with links within a document i.e., a src
% attribute of the form |"#name"|. The code below detects
% a more general URL and fires a |launch:| action from the |\special|,
% which calls the non-existant command \texttt{typehtml}. Presumably
% this could be a batch file that calls netscape or some other WWW
% engine to process the URL.
% \begin{macrocode}
\DeclareOption{dviwindo}{%
\def\HTML@dosrc#1#2{{%
\leavevmode\sbox\z@{#2}\count@\ht\z@\@tempcnta\wd\z@
\if\string##\@car#1\@nil
\special{button: \the\@tempcnta\space\the\count@\space
"\@gobble#1"}%
\else
\special{button: \the\@tempcnta\space\the\count@\space
launch: typehtml "#1"}
\fi
\special{color push}\special{color rgb 0 1 0}%
\unhbox\z@
\special{color pop}}}%
\def\HTML@doname#1#2{\leavevmode\special{mark: "#1"}#2}}%
% \end{macrocode}
%
% \begin{macrocode}
\DeclareOption{imgalt}{}
% \end{macrocode}
%
% \begin{macrocode}
\DeclareOption{imggif}{\SGML@w{img gif support not done yet}}
% \end{macrocode}
%
% \begin{macrocode}
\DeclareOption{imgps}{\SGML@w{img ps support not done yet}}
% \end{macrocode}
%
% \changes{v0.10}{1996/03/25}{Add double quote handling}
% \begin{macrocode}
\DeclareOption{smartquotedbl}{%
\def\SGMLquotedbla{%
\textquotedblleft\global\let\SGMLquotedbl\SGMLquotedblb}
\def\SGMLquotedblb{%
\textquotedblright\global\let\SGMLquotedbl\SGMLquotedbla}
\let\SGMLquotedbl\SGMLquotedbla
\let\SGML@savedeverypar\everypar
\newtoks\everypar
\SGML@savedeverypar{%
\global\let\SGMLquotedbl\SGMLquotedbla\the\everypar}}
% \end{macrocode}
%
% \begin{macrocode}
\DeclareOption{straightquotedbl}{%
\DeclareTextCommandDefault{\textquotedbl}{{\ttfamily\char`\"}}%
\let\SGMLquotedbl\textquotedbl}
% \end{macrocode}
%
% \begin{macrocode}
\DeclareOption{chapter}{%
\def\HTML@headings{%
\chapter\section\subsection%
\subsubsection\paragraph\subparagraph}}
% \end{macrocode}
%
% \begin{macrocode}
\DeclareOption{chapter*}{%
\def\HTML@headings{%
{\chapter*}{\section*}{\subsection*}%
{\subsubsection*}{\paragraph*}{\subparagraph*}}}
% \end{macrocode}
%
% \begin{macrocode}
\DeclareOption{section}{%
\def\HTML@headings{%
\section\subsection%
\subsubsection\paragraph\subparagraph\endgraf}}
% \end{macrocode}
%
% \begin{macrocode}
\DeclareOption{section*}{%
\def\HTML@headings{%
{\section*}{\subsection*}%
{\subsubsection*}{\paragraph*}{\subparagraph*}\endgraf}}
% \end{macrocode}
%
% \begin{macrocode}
\DeclareOption{subsection}{%
\def\HTML@headings{%
\subsection%
\subsubsection\paragraph\subparagraph\endgraf\endgraf}}
% \end{macrocode}
%
% \begin{macrocode}
\DeclareOption{subsection*}{%
\def\HTML@headings{%
{\subsection*}%
{\subsubsection*}{\paragraph*}{\subparagraph*}\endgraf\endgraf}}
% \end{macrocode}
%
% \begin{macrocode}
\DeclareOption{bigint}{%
\let\HTML@int\int
\AtEndOfPackage{\RequirePackage{exscale}}}
% \end{macrocode}
%
% \changes{v0.08}{1996/03/16}{Make unnumbered sections the default}
% \begin{macrocode}
\ExecuteOptions{section*,imgalt,html2,nohyperref,straightquotedbl}
% \end{macrocode}
%
% \begin{macrocode}
\ProcessOptions
% \end{macrocode}
%
% \subsection{Fake SGML parser}
%
% \begin{macrocode}
\begingroup
% \end{macrocode}
%
% \changes{v0.12}{1997/11/29}{activate gtr and semicolon}
% \begin{macrocode}
\catcode`\<=\active
\catcode`\>=\active
\catcode`\&=\active
\catcode`\$=\active
\catcode`\"=\active
\catcode`\^=\active
\catcode`\_=\active
\catcode`\;=\active
\catcode`\A=\active
\catcode`\B=\active
\catcode`\C=\active
\catcode`\D=\active
% \end{macrocode}
% \changes{v0.12}{1997/11/29}{\cs{uppercase} not \cs{lowercase}}
% \begin{macrocode}
\uccode`\A=`\{%
\uccode`\B=`\}%
% \end{macrocode}
% \changes{v0.10}{1996/03/25}{Swap round lccodes of C and D}
% \changes{v0.10}{1996/03/25}{Add double quote handling}
% \begin{macrocode}
\uccode`\C=`\|%
\uccode`\D=`\\%
% \end{macrocode}
%
% \begin{macrocode}
\uppercase{\endgroup
% \end{macrocode}
%
% \begin{macro}{\SGMLent@@}
% \changes{v0.12}{1997/11/29}{delimit with active semicolon and gtr}
% \begin{macrocode}
\def\SGMLent@@#1;{\csname SGML@E@#1\endcsname}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\SGMLent@@}
% \changes{v0.12}{1997/11/29}{macro added}
% \begin{macrocode}
\def\SGML@def@active#1>{%
\expandafter\def\csname SGML@#1\endcsname}
% \end{macrocode}
% \end{macro}
%
% \begin{macrocode}
\def\dohtml{%
\begingroup
\ifx;\@undefined\expandafter\let\expandafter;\string;\fi
\ifx>\@undefined\expandafter\let\expandafter>\string>\fi
\catcode`\<=\active
\catcode`\>=\active
\catcode`\&=\active
\catcode`\{=\active
\catcode`\}=\active
\catcode`\$=\active
\catcode`\"=\active
\catcode`\^=\active
\catcode`\_=\active
\catcode`\\=\active
\catcode`\|=\active
\catcode\endlinechar=10
\catcode`\%=12
\catcode`\#=12
\catcode`\;=\active
\def\verbatim@nolig@list{\do\`\do\,\do\'\do\-}
\def<{\SGMLopen}%
\def&{\SGMLent}%
\let^\textasciicircum
\let~\textasciitilde
\def_{\_}%
\let$\$%
\def"{\SGMLquotedbl}%
\def A{\{}%
\def B{\}}%
\def C{\texttt{|}}%
\def D{\texttt{\char`\\}}%
% \end{macrocode}
% \changes{v0.07}{1996/03/15}{macro added}
% Need to be careful about writing to table of contents.
% \begin{macrocode}
\def\addcontentsline##1##2##3{%
{\def<{\string<}\def&{\string&}%
\addtocontents{##1}{\protect\dotochtml<html>}%
\addtocontents{##1}{\protect\contentsline{##2}{##3}{\thepage}}%
\addtocontents{##1}{\protect</html>}}}}
% \end{macrocode}
%
% \begin{macro}{\dotochtml}
% A `compromise' version of |\dohtml| for use in table of contents
% files.
% Allows HTML markup |<|, |&| etc, but also \TeX\ markup |\|, |{|, |}|.
% As these are incompatible, this is not 100\% reliable but it seems to
% cover most cases in practice.
% \changes{v0.07}{1996/03/15}{macro added}
% \begin{macrocode}
\def\dotochtml{%
\dohtml
\catcode`\\\z@
\catcode`\{\@ne
\catcode`\}\tw@}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\SGMLshortend}
% \changes{v0.04}{1996/03/09}{macro added}
% \begin{macrocode}
\def\SGMLshortend{/}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\SGMLgrab@}
% \begin{macrocode}
\def\SGMLgrab@#1<#2>{%
\edef\@tempd{\lowercase{\def\noexpand\@tempd{\gobblespc#2 \relax}}}%
\@tempd
% \end{macrocode}
%
% \changes{v0.04}{1996/03/09}{SHORTTAG support}
% \begin{macrocode}
\ifx\@tempd\SGMLshortend\let\@tempd\@tempc\fi
% \end{macrocode}
%
% \begin{macrocode}
\ifx\@tempb\@tempd
\advance\@tempcnta\@ne
\else
\ifx\@tempc\@tempd
\advance\@tempcnta\m@ne
\fi
\fi
\ifnum\@tempcnta=\z@
\expandafter\@tempa\expandafter{\the\@temptokena#1}%
\else
\addto@hook\@temptokena{#1<#2>}%
\expandafter\SGMLgrab@
\fi}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\SGMLopen}
% \changes{v0.10}{1996/03/25}{Add double quote handling}
% \changes{v0.12}{1997/11/29}{delimit with active gtr}
% \begin{macrocode}
\def\SGMLopen#1>{%
\SGMLopen@#1 \@nil}
% \end{macrocode}
% \end{macro}
%
% \begin{macrocode}
}
% \end{macrocode}
%
% \begin{macro}{\htmlinput}
% \begin{macrocode}
\def\htmlinput#1{\dohtml\let\@endhtml\relax\input{#1}\endgroup}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\gobblespc}
% \begin{macrocode}
\def\gobblespc#1 #2\relax{#1}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\SGMLgrabber}
% \begin{macrocode}
\def\SGMLgrabber#1#2{%
\def\@tempa{#2}%
\@tempcnta\@ne
\@temptokena{}%
\lowercase{\def\@tempb{#1}\def\@tempc{/#1}}%
\SGMLgrab@}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\SGMLopen@}
% \changes{v0.07}{1996/03/15}{macro added}
% \begin{macrocode}
\begingroup
\catcode`\"=\active
\uppercase{\endgroup
\def\SGMLopen@#1 #2\@nil{%
\toks@{}%
\edef\@tempa{\lowercase{\def\noexpand\SGMLelement{#1}}}\@tempa
\if!\@car#1\relax\@nil
\toks@{#1 #2}%
\SGML@w{Declaration ignored\MessageBreak<\the\toks@>\MessageBreak}%
\else
\if$#2$\else
\replacequotes#2"\@nil"%
\SGMLafterfi
\expandafter\toks@\expandafter{\expandafter}%
\expandafter\SGMLgetattrib\the\toks@ \@nil
\fi
\expandafter\ifx\csname SGML@\SGMLelement
\expandafter\endcsname\relax
\SGML@w{<\SGMLelement> undefined}%
\else
\csname SGML@\SGMLelement
\expandafter\expandafter\expandafter\endcsname
\fi
\fi}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\replacequotes}
% \begin{macrocode}
\def\replacequotes#1"#2"{%
\def\@tempb{#2}%
\ifx\@tempb\@nnil
\addto@hook\toks@{#1}%
\else
\addto@hook\toks@{#1{#2}}%
\expandafter\replacequotes
\fi}}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\SGMLafterfi}
% \begin{macrocode}
\def\SGMLafterfi#1\fi{\fi#1}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\SGMLgobbletofi}
% \begin{macrocode}
\def\SGMLgobbletofi#1\fi{\fi}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\SGMLgetattrib}
% \changes{v0.10}{1996/03/25}{use dollar to distingish empty value}
% \begin{macrocode}
\def\SGMLgetattrib#1 #2{%
\ifx\box#1\box\else
\SGMLgetval#1=$=\@nil
\def\@tempa{#2}%
\ifx\@tempa\@nnil
\expandafter\SGMLgobbletofi
\else
\expandafter\SGMLafterfi
\fi
\SGMLgetattrib#2%
\fi}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\SGMLgetval}
% \changes{v0.08}{1996/03/16}{lowercase attribute names}
% If no value was supplied |#2| will be |$| (Even if the value is |$|
% The test is false, as that would be catcode 13. Done this way rather
% than looking for empty to distinguish |alt=""| with empty value.
% \begin{macrocode}
\def\SGMLgetval#1=#2=#3\@nil{%
\ifcat$#2%
\lowercase{\SGML@addattrib\doimplied{#1}}%
\else
\lowercase{\SGML@addattrib{\do{#1}}}{#2}%
\fi}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\SGML@addattrib}
% \changes{v0.08}{1996/03/16}{macro added}
% \begin{macrocode}
\def\SGML@addattrib#1#2{\addto@hook\toks@{#1{#2}}}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\SGML@w}
% \begin{macrocode}
\def\SGML@w{\PackageWarning{typehtml}}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\SGMLdef}
% \changes{v0.12}{1997/11/29}{allow active delimiters}
% \begin{macrocode}
\def\SGMLdef#1{%
\ifcat\noexpand#1\noexpand~%
\expandafter\SGML@def@active
\else
\expandafter\SGML@def
\fi}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\SGMLdef}
% \changes{v0.12}{1997/11/29}{macro added}
% make sure this is a catcode 12 |>|.
% \begin{macrocode}
\edef\@tempa{\def\noexpand\SGML@def##1\string>}\@tempa{%
\expandafter\def\csname SGML@#1\endcsname}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\SGMLent}
% \begin{macrocode}
\expandafter\def\expandafter\SGMLent\expandafter{%
\expandafter\protect\csname& \endcsname}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{& }
% \begin{macrocode}
\expandafter\def\csname& \endcsname{%
\futurelet\@let@token\SGMLent@}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\SGMLent@}
% \begin{macrocode}
\def\SGMLent@{%
\ifx\@let@token\@sptoken
\&%
\else
\expandafter\SGMLent@@
\fi}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\SGMLentity}
% \begin{macrocode}
\def\SGMLentity#1{%
\expandafter\def\csname SGML@E@#1\endcsname}
% \end{macrocode}
% \end{macro}
%
% \subsection{The HTML2 DTD}
%
% \begin{macrocode}
\SGMLdef<html>{}
\SGMLdef</html>{\@endhtml}
\let\@endhtml\endgroup
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<title>{\typeout{***TITLE***}\SGMLgrabber{title}\typeout}
% \end{macrocode}
%
% \begin{macrocode}
\long\def\@tempa#1#2#3#4#5#6{%
\SGMLdef<h1>{\SGMLgrabber{h1}{\HTMLsection{#1}}}%
\SGMLdef<h2>{\SGMLgrabber{h2}{\HTMLsection{#2}}}%
\SGMLdef<h3>{\SGMLgrabber{h3}{\HTMLsection{#3}}}%
\SGMLdef<h4>{\SGMLgrabber{h4}{\HTMLsection{#4}}}%
\SGMLdef<h5>{\SGMLgrabber{h5}{\HTMLsection{#5}}}%
\SGMLdef<h6>{\SGMLgrabber{h6}{\HTMLsection{#6}}}}
% \end{macrocode}
%
% \begin{macrocode}
\expandafter\@tempa\HTML@headings
% \end{macrocode}
%
% \begin{macrocode}
\def\HTMLsection#1#2{#1{\ignorespaces#2\unskip}}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<head>{}
\SGMLdef</head>{}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<body>{}
\SGMLdef</body>{}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<bodytext>{}
\SGMLdef</bodytext>{}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<p>{\par}
\SGMLdef</p>{\par}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<blockquote>{\begin{quote}}
\SGMLdef</blockquote>{\end{quote}}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<address>{\begin{quote}}
\SGMLdef</address>{\end{quote}}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<ul>{\begin{itemize}}
\SGMLdef</ul>{\end{itemize}}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<ol>{\begin{enumerate}}
\SGMLdef</ol>{\end{enumerate}}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<li>{\item}
\SGMLdef</li>{}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<dl>{%
\let\do\dldo
\let\doimplied\dlimplied
\begin{description}\the\toks@}
\SGMLdef</dl>{\end{description}}
% \end{macrocode}
%
% \begin{macrocode}
\def\dldo#1#2{%
\def\@tempa{compact}\def\@tempb{#1}%
\ifx\@tempa\@tempb
\itemsep\z@
\advance\@totalleftmargin-\leftmargin
\advance\linewidth\leftmargin
\itemindent-\labelsep
\leftmargin\z@
\parshape \@ne \@totalleftmargin \linewidth
\fi}
\def\dlimplied#1{\dldo{#1}\relax}
% \end{macrocode}
%
% \begin{macrocode}
\def\itx#1{\item[#1]}
\SGMLdef<dt>{\begin{lrbox}\z@\bfseries\let\maybeenddt\enddt}
\SGMLdef</dt>{\maybeenddt}
\SGMLdef<dd>{\maybeenddt}
\SGMLdef</dd>{}
\def\enddt{\end{lrbox}\item[\unhbox\z@]}
\let\maybeenddt\relax
% \end{macrocode}
%
% \changes{v0.07}{1996/03/15}{hyperref support (SPQR)}
% \begin{macrocode}
\SGMLdef<a>{\SGMLgrabber{a}\HTML@anchor}
% \end{macrocode}
%
% \begin{macro}{\HTML@anchor}
% This handles the A tag.
% \changes{v0.04}{1996/03/09}{macro added}
% \begin{macrocode}
\def\HTML@anchor#1{{%
\let\@tempa\@gobble
\def\_{\string_}%
\let\do\ado
\the\toks@
\@tempa{#1}}}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\ado}
% Thanks to SPQR for first pass at integrating \textsf{hyperref}.
% \begin{macrocode}
\def\ado#1#2{%
\def\@tempb{name}\def\@tempc{#1}%
\ifx\@tempb\@tempc
\let\@tempa\@firstofone
\def\@tempa{\HTML@doname{#2}}%
\else
\def\@tempa{\HTML@dosrc{#2}}%
\fi}
% \end{macrocode}
% \end{macro}
%
% \changes{v0.03}{1996/03/08}{pre is alltt not verbatim}
% \begin{macrocode}
\SGMLdef<pre>{%
\par
\begingroup
\parindent\z@
\obeylines\verbatim@font\@noligs
\frenchspacing\@vobeyspaces}
% \end{macrocode}
%
%
% \begin{macrocode}
\SGMLdef</pre>{\endgroup}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<tt>{\SGMLgrabber{tt}\texttt}
\SGMLdef<b>{\SGMLgrabber{b}\textbf}
\SGMLdef<i>{\SGMLgrabber{i}\textit}
\SGMLdef<em>{\SGMLgrabber{em}\emph}
\SGMLdef<strong>{\SGMLgrabber{strong}\textbf}
\SGMLdef<code>{\SGMLgrabber{code}\texttt}
\SGMLdef<samp>{\SGMLgrabber{samp}\textsf}
\SGMLdef<kbd>{\SGMLgrabber{kbd}\texttt}
\SGMLdef<var>{\SGMLgrabber{var}\textit}
\SGMLdef<cite>{\SGMLgrabber{cite}\textit}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<form>{\par\medskip}
\SGMLdef</form>{\par\medskip}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<select>{%
\let\do\selectdo
\the\toks@\par
\begin{tabular}{|l|}%
\hline\@tempc\\\hline
\let\tabularnewline\relax
\ignorespaces}
% \end{macrocode}
%
% \begin{macrocode}
\def\selectdo#1#2{%
\def\@tempa{name}\def\@tempb{#1}%
\ifx\@tempa\@tempb\def\@tempc{#2}\fi}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef</select>{\\\hline\end{tabular}}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<option>{%
\gdef\optionbul{\phantom{$\bullet$}}%
\let\do\optiondo
\let\doimplied\optionimplied
\the\toks@
\tabularnewline
\let\tabularnewline\\%
\optionbul\space\ignorespaces}
\SGMLdef</option>{}
% \end{macrocode}
%
% \begin{macro}{\optiondo}
% Handle attributes to the OPTION element.
% \begin{macrocode}
\def\optiondo#1#2{%
\def\@tempa{selected}\def\@tempb{#1}%
\ifx\@tempa\@tempb\gdef\optionbul{$\bullet$}\fi}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\optionimplied}
% Handle the case where just the attribute value is given.
% \begin{macrocode}
\def\optionimplied#1{%
\def\@tempa{selected}\def\@tempb{#1}%
\ifx\@tempa\@tempb\gdef\optionbul{$\bullet$}\fi}
% \end{macrocode}
% \end{macro}
%
% \begin{macrocode}
\SGMLdef<input>{}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<img>{{%
\let\do\imgdo
\def\@tempa{\doimage}%
\the\toks@
\@tempa}}
% \end{macrocode}
%
% \begin{macrocode}
\def\doimage{\textsf{[image]}}
% \end{macrocode}
%
% \begin{macro}{\imgdo}
% Handle IMG attributes (not very usefully)
% \begin{macrocode}
\def\imgdo#1{\csname img=#1\endcsname}
\expandafter\def\csname img=align\endcsname#1{%
\SGML@w{align=#1 ignored}}
\expandafter\def\csname img=src\endcsname#1{%
\SGML@w{src=#1 ignored}}
\expandafter\def\csname img=height\endcsname#1{%
\SGML@w{height=#1 ignored}}
\expandafter\def\csname img=alt\endcsname#1{%
\def\doimage{#1}}
% \end{macrocode}
% \end{macro}
%
% Horizontal rules and line breaks.
% \changes{v0.12}{1997/11/29}{BR in vertical mode allowed.}
% \begin{macrocode}
\SGMLdef<hr>{\par\smallskip\hrule\smallskip}
\SGMLdef<br>{\leavevmode\\}
% \end{macrocode}
%
% These are obsolete in HTML3 but do them anyway.
% \changes{v0.10}{1996/03/25}{XMP and LISTING and PLAINTEXT added}
% \begin{macrocode}
\SGMLdef<xmp>{%
\SGML@pre
\def\@tempb{/xmp}%
\let\SGMLopen\HTML@xmptest}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<listing>{%
\SGML@xmp
\def\@tempb{/listing}}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<plaintext>{%
\SGML@xmp
\def\@tempb{/plaintext}}%
% \end{macrocode}
%
% \begin{macro}{\HTML@xmptest}
% \begin{macrocode}
\def\HTML@xmptest#1>{%
\lowercase{\def\@tempa{#1}}%
\ifx\@tempa\@tempb
\endgroup
\else
\SGMLafterfi
<#1>%
\fi}
% \end{macrocode}
% \end{macro}
%
%
% SGML syntax Character entities.
% \begin{macrocode}
\SGMLentity{amp}{\&}
\SGMLentity{lt}{\ensuremath{<}}
\SGMLentity{gt}{\ensuremath{>}}
% \end{macrocode}
%
% ISO Latin-1 Character entities.
% \begin{macrocode}
\SGMLentity{aacute}{\'a}
\SGMLentity{Aacute}\'A{}
\SGMLentity{acirc}{\^a}
\SGMLentity{Acirc}{\^A}
\SGMLentity{agrave}{\`a}
\SGMLentity{Agrave}{\`A}
\SGMLentity{aring}{\r a}
\SGMLentity{Aring}{\r A}
\SGMLentity{atilde}{\~a}
\SGMLentity{Atilde}{\~A}
\SGMLentity{auml}{\"a}
\SGMLentity{Auml}{\"A}
\SGMLentity{aelig}{\ae}
\SGMLentity{AElig}{\AE}
\SGMLentity{ccedil}{\c c}
\SGMLentity{Ccedil}{\c C}
\SGMLentity{eth}{\dh}
\SGMLentity{ETH}{\DH}
\SGMLentity{eacute}{\'e}
\SGMLentity{Eacute}{\`E}
\SGMLentity{ecirc}{\^e}
\SGMLentity{Ecirc}{\^E}
\SGMLentity{egrave}{\`e}
\SGMLentity{Egrave}{\`E}
\SGMLentity{euml}{\"e}
\SGMLentity{Euml}{\"E}
\SGMLentity{iacute}{\'\i}
\SGMLentity{Iacute}{\'I}
\SGMLentity{icirc}{\^\i}
\SGMLentity{Icirc}{\^I}
\SGMLentity{igrave}{\`\i}
\SGMLentity{Igrave}{\`I}
\SGMLentity{iuml}{\"\i}
\SGMLentity{Iuml}{\"I}
\SGMLentity{ntilde}{\~n}
\SGMLentity{Ntilde}{\~N}
\SGMLentity{oacute}{\'o}
\SGMLentity{Oacute}{\'O}
\SGMLentity{ocirc}{\^o}
\SGMLentity{Ocirc}{\^O}
\SGMLentity{ograve}{\`o}
\SGMLentity{Ograve}{\`O}
\SGMLentity{oslash}{\oe}
\SGMLentity{Oslash}{\OE}
\SGMLentity{otilde}{\~o}
\SGMLentity{Otilde}{\~O}
\SGMLentity{ouml}{\"o}
\SGMLentity{Ouml}{\"O}
\SGMLentity{szlig}{\ss}
\SGMLentity{thorn}{\th}
\SGMLentity{THORN}{\TH}
\SGMLentity{uacute}{\'u}
\SGMLentity{Uacute}{\'U}
\SGMLentity{ucirc}{\^u}
\SGMLentity{Ucirc}{\^U}
\SGMLentity{ugrave}{\`u}
\SGMLentity{Ugrave}{\`U}
\SGMLentity{uuml}{\"u}
\SGMLentity{Uuml}{\"U}
\SGMLentity{yacute}{\'y}
\SGMLentity{Yacute}{\'Y}
\SGMLentity{yuml}{\"y}
% \end{macrocode}
%
% \subsection{Netscape Non-HTML tags}
%
% Netscape allows certain tags that do not correspond to HTML elements.
% These are \emph{Bad Thing}. Originally the documentation of this
% package stated that such `extensions' would not be supported, however
% as a request came from \ldots\ldots\footnote{Name withheld to
% protect the guilty} who also supplied most of the code in this
% section (and also the table section), I have added some support
% which is enabled if the \texttt{netscape} option is used.
% \begin{macrocode}
\ifx\HTML@not\@undefined\else
% \end{macrocode}
%
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Do something with bad reprehensible nonstandard tags
% that have the annoying habit of turning up often in html files that
% I want to print. [mjd,1996/03/20]
%
% |\HTML@not| is defined above in the netscape option:
% Naughty Nonstandard Extension Warning for things like
% |<center>| and |<font>|. (I thought these were
% Netscape-specific but the technical notes at Spyglass's web site
% showed that I was wrong. [mjd,1996/03/20])
% \begin{macrocode}
\SGMLdef<center>{\HTML@not{center}\begin{center}}
\SGMLdef</center>{\end{center}}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<blink>{\SGMLgrabber{blink}\textbf}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<font>{\HTML@not{font}\begingroup
\let\do\fontdo\the\toks@}
\SGMLdef</font>{\endgroup}
% \end{macrocode}
% |\fontdo| must look at the first character of the `size, value to see
% if it is a relative size change (|+| or |-|). Otherwise it is an
% absolute size change.
% \begin{macrocode}
\def\fontdo#1#2{%
\def\@tempa{size}\def\@tempb{#1}%
\ifx\@tempa\@tempb
\font@switch#2\relax\@nil
\fi}
% \end{macrocode}
%
% Let's hack a nice little hook into |\@setfontsize| (tsk tsk).
% If we can set the current font size number there, it makes the rest
% of the job much easier.
% \begin{macrocode}
\toks@\expandafter{\set@fontsize{#1}{#2}{#3}}
\edef\@tempa{%
\def\noexpand\set@fontsize##1##2##3{\the\toks@\noexpand\set@fontnum}}
\@tempa
% \end{macrocode}
%
% Take |\f@size| which is a real number, convert it to an integer,
% and normalize to the desired range.
% \begin{macrocode}
\def\set@fontnum{\dimen@\f@size\p@
\dimen@\mul@ptsize\dimen@
\count@\dimen@ \divide\count@\p@
\advance\count@ -5\relax
\edef\@fontnum{\number\count@}}
% \end{macrocode}
%
% Nice consistent naming conventions as always.
% multiplier if 11pt or 12pt documentclass option is used
% \begin{macrocode}
\def\mul@ptsize{}%
% \end{macrocode}
%
% 5 = |\normalsize| I think
% \begin{macrocode}
\def\@fontnum{5}
% \end{macrocode}
%
% Initialize |\mul@ptsize|
% \begin{macrocode}
\ifcase 0\@ptsize\relax
\global\let\mul@ptsize\@empty% case 0, ptsize = 10
\or\gdef\mul@ptsize{.9091}% case 1, ptsize = 11
\else\gdef\mul@ptsize{.8333}% case 2, ptsize = 12
\fi
% \end{macrocode}
%
% |\font@switch| looks for |+| or |-| and selects a suitable fontsize
% command.
% \begin{macrocode}
\def\font@switch#1#2\@nil{\count@\@fontnum\relax
\ifx +#1\advance\else\ifx -#1\advance\fi\fi
\count@#1#2\relax
\ifcase\count@ \tiny\or \tiny\or \scriptsize
\or\footnotesize \or\small \or\normalsize \or\large
\or\Large \or\LARGE \or\huge \else\Huge \fi}
% \end{macrocode}
%
% \begin{macrocode}
\fi
% \end{macrocode}
%
% \subsection{The HTML3 DTD}
%
% |\HTML@two@stop| is |\endinput| (and so the package stops here)
% unless the HTML3 option is given.
% \begin{macrocode}
\HTML@two@stop
\SGML@w{HTML3 support not finished yet}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<math>{\SGMLgrabber{math}\domath}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<sup>{^\bgroup\HTMLscriptmap}
\SGMLdef</sup>{\egroup}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<sub>{_\bgroup\HTMLscriptmap}
\SGMLdef</sub>{\egroup}
% \end{macrocode}
%
% GRUMBLE! GRUMBLE! GRUMBLE! Possibly the worst feature of \TeX's math
% markup is the nature of the infix operators for fractions and the
% like. And here it is faithfully (or actually not very faithfully)
% reconstructed here\ldots
% \begin{macrocode}
\SGMLdef<box>{\SGMLgrabber{box}\dobox}
% \end{macrocode}
%
% \begin{macrocode}
\begingroup
\catcode`\<=\active
\catcode`\>=\active
\catcode`\&=\active
\catcode`\_=\active
\catcode`\^=\active
\catcode`\"=\active
% \end{macrocode}
%
% \begin{macro}{\domath}
% Handle the MATH element. The body is pre-expanded one level to
% replace |{ }| by BOX elements, and to replace any SGML entitity
% references by single \TeX\ tokens so they can be recognised more
% easily. Then start math mode with |\[| (which may have been
% redefined locally if the BOX attribute was used) set up the
% shorteref map.
% \begin{macrocode}
\gdef\domath#1{%
{{\def&{\expandafter\expandafter\expandafter\noexpand\SGMLent@@}%
\let<\relax\let>\relax\let_\relax\let^\relax\let"\relax
\def\{{<box>}\def\}{</box>}%
\xdef\@gtempa{#1}}%
\let\do\mathdo
\let\doimplied\mathimplied
\the\toks@
\[%
\m@th\nulldelimiterspace\z@
\def^{<sup>}%
\def_{<sub>}%
\@gtempa\]}}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\HTMLscriptmap}
% Set up the shortref map used in super and subscripts.
% \begin{macrocode}
\gdef\HTMLscriptmap{%
\def^{</sup>}%
\def_{</sub>}}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\dobox}
% Handle the BOX element.
% First deal with the attributes, then set up the shortref map. Then
% start looking for a LEFT tag.
% \begin{macrocode}
\gdef\dobox#1{%
{\let\do\boxdo
\let\bigstrut\relax
\the\toks@
\def^{<sup>}%
\def_{<sub>}%
\lookleft@#1<left>\@nil}}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\lookleft@}
% See whether this BOX element contains a LEFT tag. Supply a `null
% delimiter' if not one supplied.
% \begin{macrocode}
\gdef\lookleft@#1<left>#2\@nil{%
\if$#2$%
{\left.\bgroup#1\mayberight}%
\else
\lookbox@#1<box>\@nil#2\@nil
\fi}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\lookbox@}
% Having found a LEFT tag, need to check it isn't inside a nested BOX.
% The following code looks for an explicit |<BOX>| (which includes a
% |{| shortref as that will have been expanded by now, however it will
% fail if nested boxes have attributes, so it may need some further
% modifications later.
% \begin{macrocode}
\gdef\lookbox@#1<box>#2\@nil#3<left>\@nil{%
\if$#2$%
{\maybeleft#1\@nil#3\mayberight}
\else
{#1 \boxtofront#2 <left> #3}%
\fi}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\boxtofront}
% After all that messing around need to put the BOX tag back where we
% found it.
% \begin{macrocode}
\gdef\boxtofront#1<box>{<box>#1}
% \end{macrocode}
% \end{macro}
%
% \begin{macrocode}
\endgroup
% \end{macrocode}
%
% \begin{macro}{\mathdo}
% \changes{v0.04}{1996/03/10}{Support math attributes}
% \begin{macrocode}
\def\mathdo#1#2{%
\def\@tempa{class-chem}\def\@tempb{#1-#2}%
\ifx\@tempa\@tempb
\everymath{\fam\z@}\everydisplay{\fam\z@}%
\fi}
\def\mathimplied#1{%
\def\@tempa{box}\def\@tempb{#1}%
\ifx\@tempa\@tempb
\def\[{\center\setbox\z@\hbox\bgroup$\displaystyle}%
\def\]{$\egroup\fbox{\box\z@}\endcenter}%
\fi}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\boxdo}
% \changes{v0.04}{1996/03/09}{Support box size attribute}
% \begin{macrocode}
\def\boxdo#1#2{%
\def\@tempa{size}\def\@tempb{#1}%
\ifx\@tempa\@tempb
\def\@tempb{#2}
\def\@tempa{normal}\ifx\@tempa\@tempb\def\@tempc{1}\fi
\def\@tempa{medium}\ifx\@tempa\@tempb\def\@tempc{2}\fi
\def\@tempa{large}\ifx\@tempa\@tempb\def\@tempc{3}\fi
\def\@tempa{huge}\ifx\@tempa\@tempb\def\@tempc{4}\fi
\edef\bigstrut{\vrule\@height\@tempc\ht\strutbox\@width\z@}
\fi}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\SGML@left}
% \begin{macrocode}
\SGMLdef<left>{\left.\bgroup}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\mayberight}
% \begin{macrocode}
\def\mayberight{\egroup\bigstrut\right.}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\maybeleft}
% \changes{v0.04}{1996/03/09}{macro added}
% \begin{macrocode}
\def\maybeleft#1#2\@nil{%
\in@{#1}{()[]\SGML@E@rbrace\SGML@E@lbrace}%
\ifin@
\left#1\bgroup#2%
\else
\let\SGML@E@int\HTML@bigint
#1#2\left.\bgroup\let\SGML@E@int\int
\fi}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\righttest}
% \changes{v0.04}{1996/03/09}{macro added}
% \begin{macrocode}
\def\righttest#1{%
\in@{#1}{()[]\SGML@E@rbrace\SGML@E@lbrace}%
\ifin@
\right#1\let\mayberight\relax
\else
\right.\let\mayberight\relax\expandafter#1%
\fi}
% \end{macrocode}
% \end{macro}
%
% \subsection{`Big int' processing}
% I am not sure that stretchy integral signs are good idea in general,
% and certainly they do not fit well with the Computer Modern style of
% sloping integral sign as opposed to the more vertical style of, say,
% Lucida. However\ldots
%
% \begin{macro}{\HTML@int}
% \changes{v0.04}{1996/03/010}{macro added}
% \begin{macrocode}
\ifx\HTML@int\@undefined
% \end{macrocode}
%
% \begin{macro}{\HTML@bigint}
% Normally just use the standard |\int|.
% \begin{macrocode}
\let\HTML@bigint\int
% \end{macrocode}
%
% \begin{macrocode}
\else
% \end{macrocode}
%
% With the |bigint| option .
% The original |\int| (in a big font) together with any saved limits
% (in the normal font).
% \begin{macrocode}
\def\HTML@int{\int^{\box\tw@}_{\box4}}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\HTML@bigint}
% \begin{macrocode}
\def\HTML@bigint#1\left.\bgroup{%
\def\@tempa{#1}%
\setbox\z@\hbox\bgroup
\aftergroup\HTMLafterbigint$\displaystyle\bgroup
\aftergroup$\aftergroup\egroup}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\HTMLafterbigint}
% \begin{macrocode}
\def\HTMLafterbigint{%
\dimen@.5\ht\z@
\advance\dimen@.5\dp\z@
{\SGMLdef<sup>{\setbox\tw@\hbox\bgroup\HTMLscriptmap$\scriptstyle}%
\SGMLdef<sub>{\setbox4\hbox\bgroup\HTMLscriptmap$\scriptstyle}%
\SGMLdef</sup>{$\egroup}%
\SGMLdef</sub>{$\egroup}%
\setbox\tw@\box\voidb@x
\setbox4\box\voidb@x
\@tempa
\ifdim\dimen@>\f@size\p@
% \end{macrocode}
% At this point, could do |\fontsize\dimen@\z@\selectfont| but that
% would load \emph{all} the math fonnts at a strange size, so instead
% just load the extension font, and then subvert NFSS to drop that
% into the math expression. The NFSS interface is still used to
% declare the font so that a size substitution is done on the loading
% (otherwise every integral may use up a new font).
% \changes{v0.08}{1996/03/16}{Use \cs{DeclareFixedFont}}
% \begin{macrocode}
\mathop{\hbox{\DeclareFixedFont\@tempa{OMX}{cmex}{m}{n}\dimen@
$\displaystyle\textfont\thr@@\@tempa\HTML@int$}}%
\else
\HTML@int
\fi
}\left.\box\z@}
% \end{macrocode}
% \end{macro}
%
% \begin{macrocode}
\fi
% \end{macrocode}
% \end{macro}
%
%
% See above grumble. The HTML3 DTD comments specifically refer to
% these as `\LaTeX\ commands' but they are no such thing. They are in
% plain and survive into \LaTeX\ under protest! The AMS \LaTeX\
% documentation contains a much longer diatribe against these infix
% commands, and they are \emph{disabled} in the AMS \LaTeX\ styles.
% \begin{macrocode}
\SGMLdef<over>{\over}
\SGMLdef<atop>{\atop}
\SGMLdef<choose>{\choose}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<right>{\egroup\bigstrut\righttest}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<above>{\SGMLgrabber{above}%
{\let\@tempc\overlineop
\let\do\abovedo
\the\toks@
\@tempc}}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<below>{\SGMLgrabber{below}%
{\let\@tempc\underlineop
\let\do\abovedo
\the\toks@
\@tempc}}
% \end{macrocode}
%
% \begin{macrocode}
\def\overlineop#1{\mathop{\overline{#1}}}
\def\underlineop#1{\mathop{\underline{#1}}}
% \end{macrocode}
%
% \begin{macrocode}
\def\abovedo#1#2{%
\def\@tempa{sym}\def\@tempb{#1}%
\ifx\@tempa\@tempb\def\@tempc{\csname#2\endcsname}\fi}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<vec>{\SGMLgrabber{vec}\vec}
\SGMLdef<bar>{\SGMLgrabber{bar}\bar}
\SGMLdef<dot>{\SGMLgrabber{dot}\dot}
\SGMLdef<ddot>{\SGMLgrabber{ddot}\ddot}
\SGMLdef<hat>{\SGMLgrabber{hat}\hat}
\SGMLdef<tilde>{\SGMLgrabber{tilde}\tilde}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<t>{\SGMLgrabber{t}\mathrm}
\SGMLdef<bt>{\SGMLgrabber{bt}\mathbf}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<text>{\SGMLgrabber{text}\textnormal}%%%%% not in the dtd????
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<root>{\rootfudge}
\def\rootfudge#1{%
\setbox\rootbox\hbox\bgroup$\m@th\scriptscriptstyle\bgroup#1}
% \end{macrocode}
%
% I think the HTML3 DTD is wrong here\footnote
% {Since confirmed by Dave Raggett, the HTML3 author},
% it allows the OF element to
% take content, which is at variance with the description in the text.
% \begin{macrocode}
\SGMLdef<of>{\egroup$\egroup\SGMLgrabber{root}\offudge}
\SGMLdef</of>{}
\def\offudge#1{\mathpalette\r@@t{#1}}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<sqrt>{\SGMLgrabber{sqrt}\sqrt}
% \end{macrocode}
%
% \changes{v0.08}{1996/03/16}{Add basic support for array element}
%
% Hate allocating registers, so this will probably go, but for now
% give myself four (global) count registers to play with.
% \begin{macrocode}
\newcount\HTMLrow
\newcount\HTMLcol
\newcount\HTMLrowspan
\newcount\HTMLcolspan
% \end{macrocode}
%
% The HTML array element. Support for ALIGN, COLSPAN, ROWSPAN
% LABELS, LDELIM and RDELIM. However not all combinations of alignment
% and labels do `the right thing'.
%
% \changes{v0.09}{1996/03/21}{COLSPEC support for ARRAY}
%
% Uses a \TeX\ primitive |\halign| construction, rather than use the
% \LaTeX\ |array| environment directly.
% \begin{macrocode}
\SGMLdef<array>{{\ifnum`}=0\fi
\let\do\arraydo
\let\doimplied\arrayimplied
\let\HTMLal.%
\let\HTMLar.%
\global\HTMLrow\z@
\let\HTMLabox\vcenter
\the\toks@
\setbox\z@\vbox\bgroup\halign\bgroup
\strut\span\HTMLacolspec\cr\nocr}
% \end{macrocode}
%
% \begin{macro}{\HTMLacolspec}
% \changes{v0.09}{1996/03/21}{macro added}
% \begin{macrocode}
\def\HTMLacolspec{##&&##}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\HTMLamakepream}
% \changes{v0.09}{1996/03/21}{macro added}
% \begin{macrocode}
\def\HTMLamakepream#1{%
\let\HTMLacolspec\@empty
\let\@sharp\relax
\lowercase{\@tfor\@tempc:=#1}\do{%
\if\@tempc l%
\edef\HTMLacolspec{\HTMLacolspec\@sharp\hfill&}%
\else
\if\@tempc c%
\edef\HTMLacolspec{\HTMLacolspec\hfill\@sharp\hfill&}%
\else
\if\@tempc r%
\edef\HTMLacolspec{\HTMLacolspec\hfill\@sharp&}%
\else
\if\@tempc +%
\edef\HTMLacolspec{\HTMLacolspec$+$}%
\else
\if\@tempc -%
\edef\HTMLacolspec{\HTMLacolspec$-$}%
\else
\if\@tempc =%
\edef\HTMLacolspec{\HTMLacolspec$=$}%
\fi
\fi
\fi
\fi
\fi
\fi}%
\def\@sharp{########}%
\edef\HTMLacolspec{\HTMLacolspec&\@sharp}}
% \end{macrocode}
% \end{macro}
%
% \begin{macrocode}
\SGMLdef</array>{\HTMLendarray}
% \end{macrocode}
%
% \begin{macrocode}
\let\HTMLcr\cr
% \end{macrocode}
%
% \begin{macro}{\HTMLendarray}
% Non LABELS ending
% \begin{macrocode}
\def\HTMLendarray{%
\endi\crcr\egroup\egroup
\ifx\HTMLabox\vtop
\setbox\z@\vtop{\unvbox\z@}%
\else
\ifx\HTMLabox\vcenter
\dimen@\ht\z@
\advance\dimen@\dp\z@
\divide\dimen@\tw@
\advance\dimen@-\ht\z@
\setbox\z@\hbox{\raise\dimen@\box\z@}%
\fi
\fi
\dimen@=\ht\z@
\setbox\z@
\hbox{$\left\HTMLal\kern-1em\vcenter{\box\z@}\kern-1em\right\HTMLar$}%
\advance\dimen@-\ht\z@
\raise\dimen@\box\z@
\ifnum`{=0\fi}}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\HTMLendarraylabels}
% LABELS ending
% \begin{macrocode}
\def\HTMLendarraylabels{%
\endi\crcr\strut\cr\egroup\egroup
\setbox2=\vsplit\z@ to \baselineskip
\setbox\z@\vbox{\unvbox\z@\global\setbox\@ne\lastbox}%
\setbox4\hbox{\unhbox\@ne\unskip\global\setbox\@ne\lastbox}%
\vcenter{%
\box2
\hbox{$\kern\wd\@ne
\left\HTMLal\kern-\wd\@ne
\vcenter{\box\z@}%
\right\HTMLar$}}%
\ifnum`{=0\fi}}
% \end{macrocode}
% \end{macro}
%
% \begin{macrocode}
\def\nocr{\relax\iffalse{\fi\let\HTMLcr\relax\iffalse}\fi}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<row>{%
\endi\HTMLcr
\global\advance\HTMLrow\@ne
\global\HTMLcol\z@}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef</row>{}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLdef<item>{%
\let\do\itemdo
\gdef\@gtempa{\global\advance\HTMLcol\@ne}%
\gdef\@gtempb{}%
\gdef\@gtempc{}%
\global\HTMLcolspan\@ne
\the\toks@
\endi%
\@gtempc
\@gtempa
% \end{macrocode}
%
% If an earlier row contained an entry spanning down to this point,
% need to jump across to the next column (and perhaps further).
% \begin{macrocode}
\spanifneeded
% \end{macrocode}
%
% |\@gtempb| is normally empty but will be defined if the item had an
% ALIGN attribute.
% \begin{macrocode}
\@gtempb
% \end{macrocode}
% First box each entry which allows measuring needed (but not yet
% done) for vertical spanning.
% \begin{macrocode}
\setbox\z@\hbox\bgroup$%
\def\endi{\unskip$\egroup%
\quad\HTMLaleft\box\z@\HTMLaright\quad&}%
\ignorespaces}
% \end{macrocode}
%
% \begin{macro}{\spanifneeded}
% If the current row/column is in the list of spanned entries, jump to
% next column and look again.
% \begin{macrocode}
\def\spanifneeded{%
\edef\@tempa{\noexpand\in@{,\the\HTMLrow/\the\HTMLcol,}{\spanitems}}%
\@tempa
\ifin@
\@firstofone{&}\global\advance\HTMLcol\@ne
\expandafter\spanifneeded
\fi}
% \end{macrocode}
% \end{macro}
%
% As usual handle end tags that may be omitted by making them
% translate to empty.
% \begin{macrocode}
\SGMLdef</item>{}
% \end{macrocode}
%
% \begin{macro}{\HTMLaleft}
% \begin{macro}{\HTMLaright}
% Default stuff to put around the entries. Locally redefined by an
% ALIGN attribute.
% \begin{macrocode}
\let\HTMLaleft\hfil
\let\HTMLaright\hfil
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\endi}
% Code to end an item. Extra indirection used to handle omitted tags.
% \begin{macrocode}
\let\endi\relax
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\arraydo}
% \changes{v0.09}{1996/03/21}{COLSPEC added}
% Handle ARRAY attributes.
% \begin{macrocode}
\def\arraydo#1#2{%
\def\@tempa{#1}\def\@tempb{#2}%
\def\@tempc{align}%
\ifx\@tempa\@tempc
\def\@tempc{top}%
\ifx\@tempb\@tempc
\let\HTMLabox\vtop
\else
\def\@tempc{bottom}%
\ifx\@tempb\@tempc
\let\HTMLabox\vbox
\fi
\fi
\else
\def\@tempc{ldelim}%
\ifx\@tempa\@tempc
\let\HTMLal\@tempb
\else
\def\@tempc{rdelim}%
\ifx\@tempa\@tempc
\let\HTMLar\@tempb
\else
\def\@tempc{labels}%
\ifx\@tempa\@tempc
\let\HTMLendarray\HTMLendarraylabels
\else
\def\@tempc{colspec}%
\ifx\@tempa\@tempc
\HTMLamakepream{#2}%
\fi
\fi
\fi
\fi
\fi}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\arrayimplied}
\def\arrayimplied#1{%
\def\@tempa{labels}\def\@tempb{#1}%
\ifx\@tempa\@tempb
\let\HTMLendarray\HTMLendarraylabels
\fi}
% \end{macro}
%
% \begin{macro}{\itemdo}
% Handle ITEM attributes
% \begin{macrocode}
\def\itemdo#1#2{%
\def\@tempa{#1}\def\@tempb{#2}%
\def\@tempc{colspan}%
\ifx\@tempa\@tempc
\global\HTMLcolspan#2\relax
\gdef\@gtempa{\@multispan#2\relax\global\advance\HTMLcol#2\relax}%
\else
\def\@tempc{align}%
\ifx\@tempa\@tempc
\def\@tempc{left}%
\ifx\@tempb\@tempc
\gdef\@gtempb{\let\HTMLaleft\relax}%
\else
\def\@tempc{right}%
\ifx\@tempb\@tempc
\gdef\@gtempb{\let\HTMLaright\relax}%
\fi
\fi
\else
\def\@tempc{rowspan}%
\ifx\@tempa\@tempc
\global\HTMLrowspan#2\relax
\gdef\@gtempc{%
\@tempcnta=\HTMLrow
\advance\@tempcnta\HTMLrowspan
% \end{macrocode}
%
% Double loop adds all the entries below this a ROWSPAN entry
% to |\spanitems| list.
% \begin{macrocode}
\loop
\@tempcntb=\HTMLcol
\advance\@tempcntb\HTMLcolspan
\advance\@tempcnta\m@ne
\ifnum\@tempcnta>\HTMLrow
{\loop
\xdef\spanitems{%
\spanitems\the\@tempcnta/\the\@tempcntb,}%
\advance\@tempcntb\m@ne
\ifnum\@tempcntb>\HTMLcol
\repeat}%
\repeat}%
\fi
\fi
\fi}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\spanitems}
% Initial value for list of spanned entries.
% \begin{macrocode}
\def\spanitems{,}
% \end{macrocode}
% \end{macro}
%
% \begin{macrocode}
\SGMLentity{thinsp}{\,}
\SGMLentity{emsp}{\quad}
% \end{macrocode}
%
% Far from final list of math symbol entity names\ldots
% \begin{macrocode}
\SGMLentity{alpha}{\alpha}
\SGMLentity{beta}{\beta}
\SGMLentity{gamma}{\gamma}
\SGMLentity{Gamma}{\Gamma}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLentity{int}{\int}
\SGMLentity{sum}{\sum}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLentity{lbrace}{\lbrace}
\SGMLentity{rbrace}{\rbrace}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLentity{times}{\times}
\SGMLentity{cup}{\cup}
\SGMLentity{cap}{\cap}
\SGMLentity{vee}{\vee}
\SGMLentity{wedge}{\wedge}
\SGMLentity{infty}{\infty}
\SGMLentity{oplus}{\oplus}
\SGMLentity{ominus}{\ominus}
\SGMLentity{otimes}{\otimes}
% \end{macrocode}
%
% \begin{macrocode}
\SGMLentity{sin}{\sin}
\SGMLentity{cos}{\cos}
\SGMLentity{tan}{\tan}
% \end{macrocode}
%
% \section{HTML3 Tables}
% \changes{v0.09}{1996/03/21}{TABLE added (mjd)}
% Not done yet, but here is a start\ldots
%
% Final version will probably need primitive |\halign| coding
% as for (but hopefully better than) array stuff above. Also
% will need to be lontable-like.
%
% This is all very slapdash and temporary [mjd,1996/03/20].
% Don't expect good-looking results, just results, occasionally.
%
% \begin{macrocode}
\SGMLdef<table>{\begin{table}[htp]\centering\begin{tabular}{*{10}c}}
\SGMLdef</table>{\end{tabular}\end{table}}
\SGMLdef<tr>{\ifhmode\expandafter\\\fi\relax}
\SGMLdef</tr>{\\\relax}
\SGMLdef<td>{\ifvmode\else\expandafter\hiddenamp\fi}
\def\hiddenamp{&}
% \end{macrocode}
% if |<td>| is present for each cell, then |</td>| doesn't
% need to do anything
% \begin{macrocode}
\SGMLdef</td>{}
% \end{macrocode}
%
% Whoa, if I'm to define caption properly I'd have to look up
% how/where it's used. Who, lazy old me?
%
% \begin{macrocode}
\SGMLdef<caption>{\end{tabular}\begingroup\bfseries}
\SGMLdef</caption>{\endgroup\par\smallskip\begin{tabular}{*{10}{c}}}
% \end{macrocode}
%
% \begin{macrocode}
%</package>
% \end{macrocode}
%
% \Finale
%