% \iffalse meta-comment
%
% osda.ins
% Copyright 2023-2024 by Christian Krieg (christian@osda.ws)
%
% This work (excluding the OSDA logo) may be distributed and/or modified under
% the conditions of the LaTeX Project Public License, either version 1.3 of this
% license or (at your option) any later version. The latest version of this
% license is in http://www.latex-project.org/lppl.txt and version 1.3 or later
% is part of all distributions of LaTeX version 2005/12/01 or later.
%
% This work has the LPPL maintenance status `maintained'.
%
% The Current Maintainer of this work is Christian Krieg.
%
% This work consists of the files osda.dtx and osda.ins
% and the derived file osda.sty.
%
% The OSDA logo is a trademark of Christian Krieg and may only be used and/or
% distributed in order to refer to the Workshop on Open-Source Design
% Automation. Any other use is subject to prior written permission.
%
% \fi
%
% \iffalse
%<*driver>
\ProvidesFile{osda.dtx}
%</driver>
%<package>\NeedsTeXFormat{LaTeX2e}[1999/12/01]
%<package>\ProvidesPackage{osda}
%<*package>
[2024/05/01 v1.4.0 OSDA copyright notice generator]
%</package>
%
%<*driver>
\documentclass{ltxdoc}
\usepackage{parskip}
\usepackage{hyperref}
\usepackage{listings}
\lstset
{
language=[LaTeX]TeX,
basicstyle=\linespread{1}\small\ttfamily,
commentstyle=\linespread{1}\small\itshape,
keywordstyle=\linespread{1}\small\bfseries,
escapeinside={(*@}{@*)},
frame=single, numbers=left,
xleftmargin=15pt,
xrightmargin=5pt,
numbersep=5pt,
breaklines=true,
moredelim=**[is][\ttfamily\bfseries\color{red}]{(*}{*)},
}
\usepackage[
2024,
cc-by,
pages={1}{6},
url=https://osda.ws/r/0slLz,
doi=10.1000/182,
]{osda}
\usepackage{cleveref}
\PassOptionsToClass{a4paper}{article}
\AtBeginDocument{\OnlyDescription}
\AtBeginDocument{\CodelineIndex\EnableCrossrefs\RecordChanges}
\AtBeginDocument{\RecordChanges}
\AtEndDocument{\DocInput{osda.dtx}}
\AtEndDocument{\PrintChanges}
%%\AtEndDocument{\PrintIndex}
\begin{document}
\end{document}
%</driver>
% \fi
%
% \CheckSum{0}
%
% \CharacterTable
% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
% Digits \0\1\2\3\4\5\6\7\8\9
% Exclamation \! Double quote \" Hash (number) \#
% Dollar \$ Percent \% Ampersand \&
% Acute accent \' Left paren \( Right paren \)
% Asterisk \* Plus \+ Comma \,
% Minus \- Point \. Solidus \/
% Colon \: Semicolon \; Less than \<
% Equals \= Greater than \> Question mark \?
% Commercial at \@ Left bracket \[ Backslash \\
% Right bracket \] Circumflex \^ Underscore \_
% Grave accent \` Left brace \{ Vertical bar \|
% Right brace \} Tilde \~}
%
%
% \changes{v1.0.0}{2023/03/30}{Initial version}
% \changes{v1.1.0}{2023/04/03}{Adding 'auto' option}
% \changes{v1.2.0}{2023/04/03}{Updating README}
% \changes{v1.3.0}{2023/04/04}{
% Adding presets for the years 2019 and 2020,
% adding inline OSDA logo
% }
% \changes{v1.4.0}{2024/05/01}{Adding preset for 2020}
%
% \GetFileInfo{osda.sty}
%
% \DoNotIndex{\newcommand,\newenvironment,\providecommand,\def}
%
% \def\F{F}
%
% \title{The \textsf{osda} package: \\
% OSDA Copyright Notice Generator\thanks{This document
% corresponds to \textsf{osda}~\fileversion, dated \filedate.}
% }
% \author{Christian Krieg\\ Workshop on Open-Source Design Automation (OSDA) \\
% \texttt{christian@osda.ws}
% }
% \date{May 01, 2024}
%
% \newcommand{\Example}{\vspace{1em}\noindent\textbf{Example:}\vspace{1em}}
%
% \maketitle
%
% \section{Introduction}
%
% This package automatically places a copyright notice as an un-numbered
% footnote on the title page of a document that calls |\maketitle|, indicating
% the information on the workshop where the paper was presented, along with
% additional information on the host conference, the license under which the
% document is published, and a link to the corresponding web page of the paper.
% The generated copyright notice contains a logo of the workshop, and a QR code
% that points to the paper's web page (to lead to further material). For cases
% when the copyright notice is not automatically set in the title page's
% footnote, the copyright notice can be set manually as well.
%
% \section{Usage}
%
% For the most basic use case, we just load the package, while giving a basic
% set of package options: the year of the workshop, the license under which the
% document is published, start/end pages of the paper in the workshop
% proceedings, a paper URL under which further information on the paper is
% available, and a Digital Object Identifier (DOI) that uniquely identifies the
% publication. \Cref{lst:usage-example} shows the command to load the package
% with options that generates the copyright notice visible on the title page of
% this document.
%
% \begin{lstlisting}[gobble=6,float=tb,label=lst:usage-example,caption={An
% example for the most-frequent use case to use this package}]
% \usepackage[
% 2024,
% cc-by,
% pages={1}{6},
% url=https://osda.ws/r/0slLz,
% doi=10.1000/182,
% ]{osda}
% \end{lstlisting}
%
% When loading the package, the |\maketitle| command is re-defined such that
% when it is called, an un-numbered footnote is automatically placed at the
% title page. Besides the package options, all key/value pairs given in the
% sections below can be passed as options to the package when loaded.
%
% \DescribeMacro{\osdafootnote}
% For documents that do not define |\maketitle|, the footnote can be explicitly
% set with |\osdafootnote| as shown in \Cref{lst:usage-footnote}.
% |\osdafootnote| accepts all options as the package when loaded (i.e., all
% presets and all key/value pairs given below).
%
% \begin{lstlisting}[gobble=6,label=lst:usage-footnote,caption={
% Explicitly generating an un-numbered footnote containing the copyright
% notice}]
% \osdafootnote
% \end{lstlisting}
%
% \DescribeMacro{\osdanotice}
% For cases where the copyright notice shall not be placed in a footnote, but in
% body text or some other paragraph, the package also provides the command
% |\osdanotice|, which renders the copyright notice at the place from where it
% is called (see \Cref{lst:usage-notice}). |\osdanotice| accepts all options as
% the package when loaded (i.e., all presets and all key/value pairs given
% below).
%
% \begin{lstlisting}[gobble=6,label=lst:usage-notice,caption={
% Place the copyright notice here}]
% \osdanotice
% \end{lstlisting}
%
% \DescribeMacro{\osdaset}
% Alternatively to the method given in \Cref{lst:usage-example}, we can load the
% package without options, and explicitly set the values with |\osdaset|, as
% shown in \Cref{lst:usage-osdaset}. |\osdaset| accepts all options as
% the package when loaded (i.e., all presets and all key/value pairs given
% below).
%
% \begin{lstlisting}[gobble=6,float=tb,label=lst:usage-osdaset,caption={Explicitly
% setting package options}]
% \usepackage[auto=false]{osda}
% \osdaset{
% 2024,
% cc-by,
% pages={1}{6},
% url=https://osda.ws/r/0slLz,
% doi=10.1000/182,
% }
% \end{lstlisting}
%
% \section{Package Options}
%
% \subsection{Automatically setting a footnote}
%
% \DescribeMacro{auto}
% The default behavior when loading this package is that an unnumbered footnote
% containing a copyright notice is automatically inclued when |\maketitle| is
% called. If this behavior is not desired, it can be switched off setting the
% |auto| package option to |false| (see \Cref{lst:option-auto}).
%
% \begin{lstlisting}[gobble=6, label=lst:option-auto, caption={Do not
% automatically place a footnote with a copyright notice}]
% \usepacakge[auto=false]{osda}
% \end{lstlisting}
%
% \subsection{Workshop information}
%
% \DescribeMacro{<year>}
% This option defines presets for all relevant options to the values valid for
% the year the workshop was held:
%
% \begin{itemize}
% \item{|proceedings/title|}
% \item{|workshop/counter|}
% \item{|workshop/longname|}
% \item{|workshop/acronym|}
% \item{|location/city|}
% \item{|location/country|}
% \item{|date/month|}
% \item{|date/day|}
% \item{|date/year|}
% \item{|hostconference/longname|}
% \item{|hostconference/acronym|}
% \end{itemize}
%
% We replace |<year>| with the actual year when the paper was presented. An
% example is given in \Cref{lst:option-year}.
%
% \begin{lstlisting}[gobble=6, label=lst:option-year, caption={Setting all
% workshop-related options for the year 2024}]
% \osdaset{2024}
% \end{lstlisting}
%
% Currently, presets for the following years are available:
% |2024|, |2023|, |2020|, |2019|
%
% \subsection{Paper license}
%
% \DescribeMacro{cc-by}
% \DescribeMacro{cc-by-sa}
% \DescribeMacro{cc-by-nc-sa}
% \DescribeMacro{cc-by-nc-nd}
% \DescribeMacro{cc-by-arXiv}
% \DescribeMacro{cc0}
% These options define the license under which the paper is published. In the
% example given in \Cref{lst:option-license}, the paper license is set to |CC0|.
% The options are presets that set the values of the corresponding license
% options:
%
% \begin{itemize}
% \item{|license/long|}
% \item{|license/short|}
% \item{|license/version|}
% \item{|license/url|}
% \end{itemize}
%
% \begin{lstlisting}[gobble=6, label=lst:option-license, caption={Setting the
% paper's license to CC0}]
% \osdaset{cc0}
% \end{lstlisting}
%
% \subsection{Pages}
%
% \DescribeMacro{pages}
% This option sets the page numbers of the paper as published in the workshop
% proceedings. We provide start and end page as |pages={<start>}{<end>}|, which
% sets the follwoing options:
%
% \begin{itemize}
% \item{|proceedings/startpage|}
% \item{|proceedings/endpage|}
% \end{itemize}
%
% An example is given in \Cref{lst:option-pages}.
%
% \begin{lstlisting}[gobble=6, label=lst:option-pages, caption={Setting the
% paper's page numbers as given by the workshop proceedings}]
% \osdaset{pages={16}{22}}
% \end{lstlisting}
%
% \subsection{Paper URL}
%
% \DescribeMacro{url}
% This option specifies the URL that leads to a web page at the workshop's
% website, where additional information and material related to the paper can be
% found (\Cref{lst:option-url} shows an example). Setting |url| updates the
% value of the following key:
%
% \begin{itemize}
% \item{|paper/url|}
% \end{itemize}
%
%
% \begin{lstlisting}[gobble=6, label=lst:option-url, caption={Setting the
% paper's URL to its web page on the workshop website}]
% \osdaset{url=https://osda.ws/r/0slLz}
% \end{lstlisting}
%
% \subsection{Digital Object Identifier (DOI)}
%
% \DescribeMacro{doi}
% This option specifies the paper's Digital Object Identifier (DOI) which is
% issued on publication. Setting |doi| updates the value of the following key:
%
% \begin{itemize}
% \item{|paper/doi|}
% \end{itemize}
%
% \section{Configuration Options}
%
% In the \Cref{tbl:package-options}, we document all configuration options that
% can be set either when loading the package with |usepackage|, or when using
% |\osdafootnote|, |\osdanotice|, and |\osdaset|. This package uses |pgfkeys|
% for managing the keys, and for processing key/value pairs.
%
% \begin{table}
% \caption{Package options}
% \label{tbl:package-options}
% \begin{tabular}{lp{7cm}}
% Key & Description \\
% \hline
% \hline
%
% |auto|
% & Enabling/Disabling auto-setting an un-numbered footnote
% containing a copyright notice when calling |\maketitle|. Default: |true|
% \\
%
% \hline
%
% |paper/url|
% & A URL that points to the web page of the paper on the workshop website.
% It can be used to provide additional information and/or supplementing
% material. Also, the link to the workshop website proves that the paper is
% authentic.
% \\
%
% |paper/doi|
% & The digital object identifier that is issued to the paper on
% publication
% \\
%
% |url| & A short cut to |paper/url| \\
% |doi| & A short cut to |paper/doi| \\
%
% \hline
%
% |license/long|
% & The long form of the name of the license under whose terms the paper is
% published
% \\
%
% |license/short|
% & The short form, or acronym, of the paper's license
% \\
%
% |license/version|
% & The version of the paper's license
% \\
%
% |license/url|
% & A URL that points to the paper's license terms
% \\
% \hline
%
% |proceedings/title|
% & The title of the workshop's proceedings
% \\
%
% |proceedings/startpage|
% & The first page of the paper in the proceedings
% \\
%
% |proceedings/endpage|
% & The first page of the paper in the proceedings
% \\
% |pages|
% & A shortcut to |proceedings/startpage| and |proceedings/endpage|
% that takes two arguments (e.g., |pages={26}{31}|)
% \\
%
% \hline
%
% |workshop/counter|
% & Specifies the number of the workshop's edition (e.g., |3rd|)
% \\
%
% |workshop/longname|
% & The long name of the workshop
% \\
%
% |workshop/acronym|
% & The workshop's acronym
% \\
%
% \hline
%
% |location/city|
% & The city in which the workshop took place
% \\
%
% |location/country|
% & The country in which the workshop took place
% \\
%
% \hline
%
% |date/month|
% & The month in which the workshop took place
% \\
%
% |date/day|
% & The day on which the workshop took place
% \\
%
% |date/year|
% & The year in which the workshop took place
% \\
%
% \hline
%
% |hostconference/longname|
% & The long name of the conference at which the workshop was co-hosted
% \\
%
% |hostconference/acronym|
% & The acronym of the conference at which the workshop was co-hosted
% \\
% \end{tabular}
% \end{table}
%
% \section{Useful commands}
%
% \subsection{Inline logo}
%
% \DescribeMacro{\osda}
% This command prints the OSDA logo inline as shown in the following examples at
% different font sizes (\Cref{lst:inline-logo}):
%
% \begin{lstlisting}[gobble=6, label=lst:inline-logo, caption={Inline OSDA logo}]
% Hello there, \osda{} is the place to be
%
% {\large I agree, \osda{} is the place to be!}
%
% {\small I agree, \osda{} is the place to be!}
%
% {\Huge I agree, \osda{} is the place to be!}
%
% {\tiny I agree, \osda{} is the place to be!}
% \end{lstlisting}
%
% Hello there, \osda{} is the place to be
%
% {\large I agree, \osda{} is the place to be!}
%
% {\small I agree, \osda{} is the place to be!}
%
% {\Huge I agree, \osda{} is the place to be!}
%
% {\tiny I agree, \osda{} is the place to be!}
%
%
% \StopEventually{}
%
% \section{Implementation}
%
% \subsection{Initialization macros}
%
% Here, the package dependencies are defined, along with setting up the packages
% once loaded.
%
% \begin{macrocode}%%
\RequirePackage[hang,flushmargin]{footmisc}%
\RequirePackage{flushend}%
\RequirePackage{ifthen}%
\RequirePackage{qrcode}%
\RequirePackage{xcolor}%
\RequirePackage{hyperref}%
\hypersetup{%
colorlinks = true,%
allcolors = black,%
}%
\RequirePackage{tikz}%
\RequirePackage{pgfopts}%
% \end{macrocode}
% \begin{macro}{\osdaset}
%
% |\osdaset|
%
% Command to set options for this package.
%
% Usage:
%
% |\osdaset{key1=value1, key2=value2, ...}|
%
% Example:
%
% \begin{verbatim}
% \osdaset{
% paper/url=https://osda.ws,
% license/long = XYZ license,
% license/short = XYZ,
% license/version = 1.0,
% license/url = https://xyz.org/license
% }
% \end{verbatim}
% \begin{macrocode}
%
\newcommand{\osdaset}[1]{\pgfkeys{/osda/.cd,#1}}
%
% \end{macrocode}
% \end{macro}
% \begin{macrocode}
%%
%% Specify booleans
%%
\newif\ifosda@auto
%%
%% Define keys to manage package and command options
%%
\pgfkeys {
/osda/.cd,
paper/url/.store in = \osda@paper@url,
url/.forward to = /osda/paper/url,
paper/doi/.store in = \osda@paper@doi,
doi/.forward to = /osda/paper/doi,
license/version/.store in = \osda@license@version,
license/url/.store in = \osda@license@url,
license/long/.store in = \osda@license@long,
license/short/.store in = \osda@license@short,
proceedings/title/.store in = \osda@proceedings@title,
proceedings/startpage/.store in = \osda@proceedings@startpage,
proceedings/endpage/.store in = \osda@proceedings@endpage,
pages/.code 2 args={\osdaset{proceedings/startpage=#1,proceedings/endpage=#2}},
workshop/counter/.store in = \osda@workshop@counter,
workshop/longname/.store in = \osda@workshop@longname,
workshop/acronym/.store in = \osda@workshop@acronym,
location/city/.store in = \osda@location@city,
location/country/.store in = \osda@location@country,
date/month/.store in = \osda@date@month,
date/day/.store in = \osda@date@day,
date/year/.store in = \osda@date@year,
hostconference/longname/.store in = \osda@hostconference@longname,
hostconference/acronym/.store in = \osda@hostconference@acronym,
}
%%
%% Set boolean flags
%%
\pgfkeys {
/osda/.cd,
auto/.is if=osda@auto,
}
%
% \end{macrocode}
%%
%% Specify default values
%%
% \begin{macrocode}
%
\pgfkeys {
/osda/.cd,
auto = true,
license/version = ,
license/url = ,
license/long = \textbf{\textcolor{red}{{Please specify a license}}},
license/short = ,
proceedings/startpage = ,
proceedings/endpage = ,
paper/url = https://please.specify.the/url/here,
paper/doi = ,
}
%
% \end{macrocode}
%%
%% Define some useful styles
%%
% \begin{macrocode}
%
\pgfkeys {
/osda/.cd,
%
% Default values for specific editions of OSDA
%
2024/.style={
proceedings/title = Proceedings of the 4th Workshop on Open-Source Design Automation (OSDA),
workshop/counter = 4th,
workshop/longname = Workshop on Open-Source Design Automation,
workshop/acronym = OSDA,
location/city = Valencia,
location/country = Spain,
date/month = March,
date/day = 25,
date/year = 2024,
hostconference/longname = {Design, Automation, and Test in Europe Conference},
hostconference/acronym = DATE,
},
2023/.style={
proceedings/title = Proceedings of the 3rd Workshop on Open-Source Design Automation (OSDA),
workshop/counter = 3rd,
workshop/longname = Workshop on Open-Source Design Automation,
workshop/acronym = OSDA,
location/city = Antwerp,
location/country = Belgium,
date/month = April,
date/day = 17,
date/year = 2023,
hostconference/longname = {Design, Automation, and Test in Europe Conference},
hostconference/acronym = DATE,
},
2020/.style={
proceedings/title = Proceedings of the 2nd Workshop on Open-Source Design Automation (OSDA),
workshop/counter = 2nd,
workshop/longname = Workshop on Open-Source Design Automation,
workshop/acronym = OSDA,
location/city = Grenoble,
location/country = France,
date/month = March,
date/day = 13,
date/year = 2020,
hostconference/longname = {Design, Automation, and Test in Europe Conference},
hostconference/acronym = DATE,
},
2019/.style={
proceedings/title = Proceedings of the 1st Workshop on Open-Source Design Automation (OSDA),
workshop/counter = 1st,
workshop/longname = Workshop on Open-Source Design Automation,
workshop/acronym = OSDA,
location/city = Florence,
location/country = Italy,
date/month = March,
date/day = 29,
date/year = 2019,
hostconference/longname = {Design, Automation, and Test in Europe Conference},
hostconference/acronym = DATE,
},
%
% Licenses
%
cc-by/.style={
license/version = 4.0,
license/url = https://creativecommons.org/licenses/by/4.0,
license/long = Creative Commons Attribution license,
license/short = CC BY,
},
cc-by-sa/.style={
license/version = 4.0,
license/url = https://creativecommons.org/licenses/by-sa/4.0,
license/long = Creative Commons Attribution-ShareAlike license,
license/short = CC BY-SA,
},
cc-by-nc-sa/.style={
license/version = 4.0,
license/url = https://creativecommons.org/licenses/by-nc-sa/4.0,
license/long = Creative Commons Attribution-Noncommercial-ShareAlike license,
license/short = CC BY-NC-SA,
},
cc-by-nc-nd/.style={
license/version = 4.0,
license/url = https://creativecommons.org/licenses/by-nc-nd/4.0,
license/long = Creative Commons Attribution-Noncommercial-NoDerivatives license,
license/short = CC BY-NC-ND,
},
arXiv/.style={
license/version = 1.0,
license/url = https://arxiv.org/licenses/nonexclusive-distrib/1.0,
license/long = {arXiv.org perpetual, non-exclusive license},
license/short =,
},
cc0/.style={
license/version =,
license/url = https://creativecommons.org/share-your-work/public-domain/cc0,
license/long = Public Domain license,
license/short = CC0,
},
}
%
% \end{macrocode}
%%
%% We now process the options passed to the package.
%%
% \begin{macrocode}
%
\ProcessPgfOptions{/osda}
%
% \end{macrocode}
%%
%% The margin defines the space between the logo's right/QR code's left side and
%% the text of the copyright notice
%%
% \begin{macrocode}
%
\newlength{\osda@margin}
%
% \end{macrocode}
%
% \begin{macro}{\WrapLR}
%%
%% |\WrapLR|
%%
%% Command to place two figures wrapped around text; we use it here for the OSDA
%% logo and the QR code that links to the paper in the acknowledgments box in the
%% footnote of the title page
%%
%% Usage:
%%
%% \WrapLR{\includegraphics[height=1.2in]{example-image-a}}%
%% {\includegraphics[height=1.2in]{example-image-b}}%
%% {\noindent Text to wrap around images}
%%
%% Adapted from: https://tex.stackexchange.com/a/455612
%%
%%
% \begin{macrocode}
%
\newcommand*{\WrapLR}[3]% #1=left image, #2=right image, #3=text (1 paragraph)
{\bgroup
\sbox0{\raisebox{-\height}{#1}}% align tops
\sbox1{\raisebox{-\height}{#2}}% measure width and height (depth)
\sbox2{\raisebox{\depth}{\makebox[\columnwidth]{\usebox0\hfill\usebox1}}}% total height
\par\noindent\usebox2\vspace{\dimexpr \ht\strutbox-\ht2-\baselineskip-\parskip}\par% overlay pictures
\setlength{\osda@margin}{2ex}
\dimen0=\dimexpr \wd0+.5\osda@margin\relax% indent
\dimen1=\dimexpr \columnwidth-\wd0-\wd1-\osda@margin\relax% width
\edef\shape{\the\dimen0 \the\dimen1}% set up \parshape arguments in loop
\dimen2=\ht\strutbox
\dimen4=\dimexpr \ht2-.5\baselineskip\relax
\count1=2
\loop\ifdim\dimen2<\dimen4
\advance\dimen2 by \baselineskip
\ifdim\dimen2>\dp0\relax% end of left image
\dimen0=0pt
\dimen1=\dimexpr \columnwidth-\wd1-.5\osda@margin\relax
\fi
\ifdim\dimen2>\dp1\relax% end of right image
\dimen1=\dimexpr \columnwidth-\wd0-.5\osda@margin\relax
\fi
\advance\count1 by 1
\edef\shape{\shape\space\the\dimen0 \the\dimen1}%
\repeat
\edef\shape{\the\count1 \space\shape\space 0pt \the\columnwidth}%
\parshape=\shape
#3\par
\egroup}
%
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\blfootnote}
%
%% |\blfootnote|
%%
%% Set footnotes without marks
%%
%% Usage:
%%
%% |\blfootnote{footnotetext}|
%%
%% From: https://tex.stackexchange.com/a/30726
%%
% \begin{macrocode}
%
\newcommand\blfootnote[1]{%
\begingroup
\renewcommand\thefootnote{}\footnote{#1}%
\addtocounter{footnote}{-1}%
\endgroup
}
%
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\osdalogo}
%%
%% |\osdalogo|
%%
%% Draws the OSDA logo at a given height
%%
%% Usage:
%%
%% |\osdalogo{height}|
%%
%% Example:
%%
%% |\osdalogo{2\baselineskip}|
%%
% \begin{macrocode}
%
\usetikzlibrary{svg.path}
\newcommand{\osdalogo}[1]{\scalebox{1}[-1]{\resizebox*{!}{#1}{%
\begin{tikzpicture}%
\pgfpathsvg{m 41.493525,114.88969 c -4.235403,-0.0951 -5.244524,4.38987 -4.853967,7.74446 0.06465,11.92294 -0.129872,23.85884 0.09828,35.77361 0.660896,3.83742 4.80625,4.07909 7.908947,3.87335 36.559883,0 73.119765,0 109.679645,0 4.2354,0.0951 5.24452,-4.38987 4.85397,-7.74445 -0.0647,-11.92294 0.12987,-23.85884 -0.0983,-35.77361 -0.6609,-3.83742 -4.80625,-4.07909 -7.90895,-3.87336 -36.55988,0 -73.119759,0 -109.679642,0 z m 15.406294,9.3338 c 7.083699,-0.16814 13.650363,5.59034 14.408423,12.6354 0.773555,-7.32725 7.848415,-13.19963 15.192447,-12.61203 5.305345,0.24729 10.291595,3.68656 12.407418,8.55802 -4.449622,-0.0531 -9.052306,0.10604 -13.406456,-0.0794 -0.839139,-2.90692 -5.235964,-3.40946 -6.707523,-0.76424 -1.678739,2.40924 0.506129,6.05789 3.422128,5.71655 1.497283,-0.0812 2.873132,-1.15803 3.311785,-2.59192 4.718573,0 9.43715,0 14.155724,0 0.08339,-2.35529 -0.165262,-4.8569 0.121518,-7.12255 5.339507,-5.05446 14.506947,-4.9329 19.710957,0.26069 2.32206,2.20209 3.8742,5.19535 4.33608,8.36202 0.90939,-7.27195 8.02238,-12.99336 15.31906,-12.32891 7.37799,0.33186 13.674,7.07245 13.50245,14.45591 0.0496,5.18443 -2.94531,10.24647 -7.51324,12.69897 -1.2907,-3.10635 -2.86729,-6.27677 -3.98135,-9.34353 2.57226,-2.09161 1.63297,-6.69649 -1.5515,-7.61542 -3.0763,-1.19911 -6.61783,1.86093 -5.86635,5.08096 0.22078,1.22057 0.97501,2.33122 2.02814,2.98654 -1.33651,3.06304 -2.67302,6.12607 -4.00953,9.18911 -4.21173,-2.03739 -7.27498,-6.23733 -7.9282,-10.87014 -0.9141,7.33051 -8.13486,13.07383 -15.48271,12.31672 -3.21287,-0.24801 -6.32487,-1.6114 -8.68532,-3.8051 0,-2.30873 0,-4.61746 0,-6.92619 -1.727782,7.19313 -9.563391,12.09549 -16.787442,10.50764 -4.612862,-0.86727 -8.678534,-4.13841 -10.513216,-8.45867 4.434157,0.0533 9.021826,-0.10629 13.360463,0.0794 0.820198,2.82501 5.042639,3.41435 6.604149,0.92056 1.808231,-2.33495 -0.226145,-6.10845 -3.171246,-5.87992 -1.550448,0.0211 -3.007434,1.11568 -3.459292,2.59898 -4.701352,0 -9.402702,0 -14.104054,0 -0.258707,-1.27682 -0.309266,-2.11823 -0.532659,-0.32786 -1.436394,7.22593 -9.014468,12.43124 -16.274501,11.17924 -7.328434,-0.91683 -13.068091,-8.13653 -12.311164,-15.48257 0.464997,-7.3576 7.032469,-13.43953 14.405011,-13.33826 z m 52.620561,9.99112 c -0.96292,0.0502 -2.60046,0.17595 -2.09755,1.57043 0.0567,2.29818 -0.11186,4.73381 0.0816,6.94851 2.876,1.60884 6.79391,-0.92082 6.51013,-4.20444 -0.0576,-2.3593 -2.13312,-4.35301 -4.49417,-4.3145 z m -52.58387,5.3e-4 c -3.299763,-0.14891 -5.665574,3.88662 -3.923721,6.69319 1.479497,2.95488 6.158026,3.05141 7.757886,0.15973 1.863071,-2.9074 -0.372921,-6.91859 -3.834165,-6.85292 z}%
\pgfusepath{fill}%
\pgfusepath{stroke}%
\end{tikzpicture}%
}}}
%
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\osda}
%%
%% |\osda|
%%
%% This command prints the OSDA logo inline at a height of 1ex
%%
%% Usage:
%%
%% |\osda{}|
%%
% \begin{macrocode}
%
\newcommand{\osda}{\raisebox{.6\baselineskip}{\osdalogo{.7\baselineskip}}}
%
% \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\osdanotice}
%%
%% |\osdanotice|
%%
%% This command sets the OSDA copyright notice, taking a URL as argument to set
%% links to the paper's web page, and to create a QR code from.
%%
%% Usage:
%%
%% |\osdanotice{url}|
%%
%% Example:
%%
%% |\osdanotice{https://osda.ws}|
%%
% \begin{macrocode}
%
\newcommand{\osdanotice}[1][]{
\osdaset{#1}
\WrapLR%
{\href{\osda@paper@url}{\osdalogo{1.8\baselineskip}}}
{\qrcode[height=3.8\baselineskip,level=L,version=1]{\osda@paper@url}}
{\noindent%
This work was presented at the \emph{\osda@workshop@counter{}
\osda@workshop@longname{} (\osda@workshop@acronym) \osda@date@year{}},
\ifthenelse{\isundefined{\osda@hostconference@longname}}{%
}{%
co-hosted with \emph{\osda@hostconference@longname} %
\ifthenelse{\isundefined{\osda@hostconference@acronym}}{%
}{%
\emph{(\osda@hostconference@acronym)}
}%
\ifthenelse{\isundefined{\osda@date@year}}{%
}{%
\emph{\osda@date@year}
}%
}%
in \osda@location@city{}, \osda@location@country{}, on
\osda@date@month{} \osda@date@day{}, \osda@date@year{}. For further
information and material, please visit the paper's web page on the
workshop website at \href{\osda@paper@url}{\textbf{\osda@paper@url}}
(just scan the QR code on the right).
%
% Copyright and license information
%
The copyright is retained by the authors.
This work is licensed under the terms of the
\osda@license@long
\ifthenelse{\isundefined{\osda@license@short} \or \equal{\osda@license@short}{}}{%
}{ %
(\osda@license@short)%
}%
\ifthenelse{\isundefined{\osda@license@version} \or \equal{\osda@license@version}{}}{%
}{, %
version \osda@license@version%
}%
\ifthenelse{\isundefined{\osda@license@url} \or \equal{\osda@license@url}{}}{%
}{, %
see \href{\osda@license@url}{\osda@license@url}%
}%
%
.
\emph{\osda@proceedings@title},
Pages \osda@proceedings@startpage--\osda@proceedings@endpage, \osda@date@year.
\ifthenelse{\isundefined{\osda@paper@doi} \or \equal{\osda@paper@doi}{}}{%
}{%
DOI: \href{https://doi.org/\osda@paper@doi}{\osda@paper@doi}%
}%
}%
}
%
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\osdafootnote}
%%
%% |\osdafootnote|
%%
%% This command sets the OSDA copyright notice in an un-numbered footnote.
%%
%% Usage:
%%
%% |\osdafootnote{url}|
%%
%% Example:
%%
%% |\osdafootnote{https://osda.ws}|
%%
% \begin{macrocode}
%
\newcommand{\osdafootnote}[1][]{
\osdaset{#1}
\blfootnote{\osdanotice\vspace{-1.5\baselineskip}}%
}
%
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\maketitle}
%%
%% |\maketitle|
%%
%% Re-defining the \maketitle command to automatically place the copyright notice
%% once the paper title is generated
%%
% \begin{macrocode}
%
%\let\maketitle@orig\maketitle
%\renewcommand{\maketitle}{%
% \ifthenelse{\boolean{\ifosda@auto}}{%
% \maketitle@orig\osdafootnote%
% }{%
% \maketitle@orig%
% }%
%}
\let\maketitle@orig\maketitle
\renewcommand{\maketitle}{%
\ifosda@auto%
\maketitle@orig\osdafootnote%
\else%
\maketitle@orig%
\fi%
}
%
% \end{macrocode}
% \end{macro}
\endinput