=========================================================================== Laptop Survey / FreeBSD =========================================================================== =========================================================================== Name : Ouchi Atsuo (vorspiel@duelists.org) Machine : Toshiba Libretto70 (CPU MMX Pentium 120MHz, HDD 1.6Gbyte(FreeBSD partition is about 800Mbyte), RAM 32Mbyte) FreeBSD : OK (2.2.7) Pccard Pkg: PAO-980913 APM BIOS : OK (1.1) Config Opt: nothing PCIC : Intel 82365A/B (5 mem & 2 I/O windows) Cards : - EPSON FlashPacker 10MB(Flash ATA; SunDisk-OEM) - I/O Data PCCF-30M(CompactFlash; SunDisk-OEM) - Melco CDN-D8C(IDE CD-ROM drive) - NTT Docomo (formerly NTT Personal) Paldio 321S(PHS with PC Card) card "NTT Personal" "32K Paldio 321S PC CARD" config 0x22 "sio2" any 0x40000 insert echo NTT Personal Paldio 321S PC Card inserted remove echo NTT Personal Paldio 321S PC Card removed - TDK LAK-CD021BX(10base-T) Misc Info : I use the sound device in MSS mode with Luigi's Sound Driver. device pcm0 at isa? port ? irq 5 drq 1 flags 0x0 vector pcmintr =========================================================================== Name : Tatsuya TANIKAWA (tanikawa@fs.kyoto.omronsoft.co.jp) Machine : TOSHIBA DynaBook SS-R 575 (CPU Pentium/P54C 75MHz, HDD 2067MB / TOSHIBA MK2103MAV, RAM 40MB) FreeBSD : OK (2.2.7-RELEASE) Pccard Pkg: PAO-980913 APM BIOS : OK (1.0 compatible mode) Config Opt: APM_PCCARD_RESUME PCIC_RESUME_RESET SCSI_DETACH ATAPI_DETACH PCIC : Intel 82365A/B (or clones) Cards : - AIWA PV-JF144 - I-O DATA DATA/FAX MODEM PCML-336 - Adaptec SlimSCSI APA-1460 - D-link DE-650 Ethernet Card - Microtech XpressDock =========================================================================== Name : Liang Tai Hwa (avatar@www.mmlab.cse.yzu.edu.tw) Machine : Twinhead Slimnote VX2 266TG (CPU Intel Pentium II 266MHz, HDD 4.3Gbytes, RAM 64Mbytes) FreeBSD : No problem (2.2.7-RELEASE) APM BIOS : No problem (1.1 (Linux reports 1.2)) Config Opt: APM_PCCARD_RESUME, PCIC_RESUME_RESET, SCSI_DETACH, ATAPI_DETACH PCIC : TI PCI-1221 PCI-CardBus Bridge NG-Cards : - D-Link DE-660 ("ed0: device timeout" under FreeBSD 2.2.7R PAO; however, this card works perfectly under Windoze98 & Linux(with pcmcia-cs-3.0.6)) Misc Info : Need XFree86-3.3.3 to run X =========================================================================== Name : Nobuyoshi SATO (jju@mo.cs.toyo.ac.jp) Machine : Panasonic Let's Note CF-M32J8 (CPU MMX Pentium 166MHz, HDD 2GB, RAM 32MB) FreeBSD : OK (2.2.7-RELEASE) Pccard Pkg: PAO-980913 APM BIOS : OK (APM 1.1 (APM 1.2 on Windows98)) PCIC : TI PCI-1250 Cards : - corega Ether PCC-T =========================================================================== Name : FUJITA,Wataru (wfujita@net.nagasaki-u.ac.jp) Machine : IBM ThinkPad235 2607-10J (CPU CPU MMX Pentium 233MHz, HDD 3253MB, RAM 96MB) FreeBSD : OK (2.2.7 release) Pccard Pkg: PAO-980912 APM BIOS : OK (APM BIOS version 1.1) PCIC : RICHO RL5C476 Cards : - Melco LPC2-T # Melco LPC2-T card "MELCO" "LPC2-T" config 0x22 "ed0" 15 0x10 ether 0x1c0 00:40:26 insert echo MELCO LPC2-T inserted insert /etc/pccard_ether $device remove echo MELCO LPC2-T removed remove /etc/pccard_ether_remove $device =========================================================================== Name : Ko Nonomura (nonomura@mb.infoweb.ne.jp) Machine : Libretto SS 1000 (CPU MMX Pentium 166MHz, HDD 2.1GB, RAM 32M) FreeBSD : OK (2.2.7-RELEASE) Pccard Pkg: PAO-980913 APM BIOS : OK (1.1) PCIC : Tohiba ToPIC97 PCI-CardBus Bridge Cards : - ACCTON EN2216 Misc Info : APM works, but I can use only Memory resume mode, I can not use suspend to HDD. =========================================================================== Name : Nobuaki NAKATSUBO (KGG02005@nifty.ne.jp) Machine : Hitachi Prius 210G (2109T16G) (CPU MMX Pentium 166MHz, HDD 2.1GB, RAM 32MB) FreeBSD : OK (2.2.7-RELEASE) Pccard Pkg: PAO-980913 APM BIOS : OK (1.1) Config Opt: PCIC_IRQ!=5 PCIC : RICOH RL5C475/RL5C476 Cards : - MELCO IFC-SC2 - Allied Telesis CentreCOM LA-PCM Misc Info : The PAO-980913 can operate the card slots through the "CardBus" setting. All devices get inactive except fdc0, ncv0, wdc0, sc0, pcic0 on the installing. This is a safe way to detect a SCSI device in a short time. IRQ5 should be excluded in the PAO-980913 installation to avoid a confliction between the pcic0 and a sound card. =========================================================================== Name : MITSUNAGA Noriaki (mitchy@er.ams.eng.osaka-u.ac.jp) Machine : COMPAQ CONTURA AERO 4/33C (CPU 486SX-33MHz, HDD 2.1GB, RAM 20MB) FreeBSD : OK (2.2.7-RELEASE) Pccard Pkg: PAO-snap-981026 APM BIOS : OK (1.1) PCIC : VLSI 82C146 Cards : - TDK LAK-CD021AX - TDK LAK-CD021BX - Media Intelligent MSC-110 - TDK DF2814 - Megaherts XJ2144 - TOSHIBA FDDPCCM1 - IBM CD-20X =========================================================================== Name : Dan Kogai (dankogai@dan.co.jp) Machine : Sharp Mebius PC-PJ1-98 (CPU MMX Pentium 233MHz, HDD 4.3MB, RAM 64MB) FreeBSD : OK (2.2.7-RELEASEVersion number of FreeBSD) Pccard Pkg: boot-pao.flp (PAO-980913_tar.gz) APM BIOS : OK (1.1) Config Opt: PSM_HOOKAPM, PSM_RESETAFTERSUSPEND PCIC : Ricoh RL5C475 PCI-CardBus Brige Cards : - 3Com Etherlink III 3C589B (ep0) - TDK LAK-CD021AX (fe0) NG-Cards : - Sharp CE-CD01 Misc Info : * If you used Win98 or reset BIOS setups prior to FreeBSD boot, make sure you COLD-START (shutdown and turn on the power, not reboot) or PC card will not be probed properly (This symptom was present in DOS). * With the machine cold-started, boot-pao installation was fine. I first made FreeBSD partition with FIPS 1.5 and chose NFS installation. * CE-CD01 is supposed to work as ATA card but the driver fails to configure wdc1. Hmm.... * options above are required to use track pad correctly. * For XF86, NeoLogic Driver is available at http://www-cv.mech.eng.osaka-u.ac.jp/~okada/FreeBSD/NeoMagic/NeoMagic.html (Thank you, Mr. Okada!). Make sure you config your kernel with options above. =========================================================================== Name : Noritaka Suzuki (nosu@mail.wbs.ne.jp) Machine : IBM ThinPad 235 (CPU MMX Pentium233, HDD 3.2G, RAM 64M) FreeBSD : OK (2.2.7-RELEASE) Pccard Pkg: 227R-PAO-980913 APM BIOS : OK (1.1) PCIC : Ricoh RL5C476 PCI-CardBus Brige Cards : - corega FastEther PCC-TX # COREGA Ether PCC-TX card "corega K.K." "corega FastEther PCC-TX" config default "ed0" any insert echo corega FastEther PCC-TX inserted insert /etc/pccard_ether $device remove echo corega FastEther PCC-TX removed remove /etc/pccard_ether_remove $device Misc Info : 100BASE-TX =========================================================================== Name : Hironao Kobayashi (hkobayashi@accs.or.jp) Machine : DELL Inspiron 3200 (CPU PentiumII 266MHz, HDD 4Gbyte(2GByte:Win98,FreeBSD:2GByte), RAM 128Mbyte) FreeBSD : OK (2.2.7-RELEASE) Pccard Pkg: PAO-980912 APM BIOS : OK (1.1) PCIC : Texas Instruments PCI-1131 CardBus Cards : - FMV-J182A(Ethernet Card) =========================================================================== Name : SATO Takeshi (tasato@lab.keihin.nkk.co.jp) Machine : Panasonic Let's note CF-S21 (CPU MMX Pentium 200MHz, HDD 3.2GB, RAM 96MB) FreeBSD : OK (2.2.7) APM BIOS : OK (1.1) PCIC : TI PCI-1250 Cards : - RATOC REX-9530 - 3Com 3C-589D-Combo Misc Info : ignore irq 5,10 pc-cards are using irq 9, 15 =========================================================================== Name : Takayuki Uchikoba (arkun@momokohouse.rim.or.jp) Machine : NEC PC-9821Ns (CPU 486DX2-50MHz, HDD 340MBytes, RAM 14MBytes) FreeBSD : OK (2.2.6-RELEASE Rev02 + PAO-980430 + PAO-980430-pc98-patch) APM BIOS : OK (APM BIOS version 1.4) PCIC : Cirrus Logic PD672X Cards : - NTT Personal 32K Paldio 321S PC CARD card "NTT Personal" "32K Paldio 321S PC CARD" config 0x22 "sio3" pio insert echo NTT Personal 32K Paldio 321S PC CARD inserted remove echo NTT Personal 32K Paldio 321S PC CARD removed - SII PHS DATA LINK MC-P100 card "SII" "PHS DATA LINK" config 0x22 "sio3" any insert echo SII PHS DATA LINK MC-P100 inserted remove echo SII PHS DATA LINK MC-P100 removed - NTT DoCoMo Mobile D Card 96P1 card "NTT DoCoMo" "Mobile D Card 96P1" "MDC96P1" config 0x22 "sio3" any insert echo NTT DoCoMo Mobile D Card 96P1 inserted remove echo NTT DoCoMo Mobile D Card 96P1 removed - MICROCORE MC144PC - PLANEX ENW-3502-T =========================================================================== Name : Lee, Jae Hong (jhlee00@chollian.net) Machine : IBM ThinkPad 560, Type 2640 (CPU Intel Pentium. 586, HDD 1G (600M Dos, 400M FreeBSD), RAM 40M) FreeBSD : OK (2.7.7) Pccard Pkg: PAO 980913 APM BIOS : NG (1.1) PCIC : Cyrrus Logic PD6729/6730 Cards : - IBM PCMCIA 33.6/14.4 Data/Fax Modem # IBM PCMCIA 33.6/14.4 Data/Fax Modem card " " "PCMCIA 33.6/14.4 Data/Fax Modem" config 0x23 "sio1" 3 reset 1000 insert echo IBM PCMCIA 33.6/14.4 Data/Fax Modem inserted remove echo IBM PCMCIA 33.6/14.4 Data/Fax Modem removed NG-Cards : IBM Portable 4X Speed CD-ROM Drive CD-400 Misc Info : ===== 1. PCMCIA Modem works well. 2. but CD-ROM Drive doesn't work, because pccard daemon doesn't probe CDROM card. When I insert cdrom card, it issues following message. Sometimes it issues "Probe failed" immediately before Attach Failed. And then, sometimes it issues same message twice. myname# Sep 25 18:39:47 myname /kernel: Card inserted, slot 0 Sep 25 18:39:47 myname /kernel: Card inserted, slot 0 Sep 25 18:39:50 myname pccardd[36]: Card "IBM"("PCMCIA CD-ROM Drive CD-400") [^?] [] matched "IBM" ("PCMCIA CD-ROM Drive CD-400") [(null)] [(null)] Sep 25 18:39:50 myname pccardd[36]: Card "IBM"("PCMCIA CD-ROM Drive CD-400") [^?] [] matched "IBM" ("PCMCIA CD-ROM Drive CD-400") [(null)] [(null)] Sep 25 18:39:53 myname /kernel: Attach Failed Sep 25 18:39:53 myname /kernel: Attach Failed Sep 25 18:39:53 myname /kernel: Return IRQ=15 Sep 25 18:39:53 myname /kernel: Return IRQ=15 Sep 25 18:39:53 myname pccardd[36]: driver allocation failed for IBM (Device not configured) Sep 25 18:39:53 myname pccardd[36]: driver allocation failed for IBM (Device not configured) Sep 25 18:39:58 myname /kernel: Card removed, slot 0 Sep 25 18:39:58 myname /kernel: Card removed, slot 0 3. I don't use apm. ====== The content of execution of "dmesg" is as follows ========: Copyright (c) 1992-1998 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 2.2.7-RELEASE #0: Fri Sep 25 18:15:02 KST 1998 root@myname.my.domain:/usr/src/sys.PAO/compile/THINKPAD.PAO CPU: Pentium/P54C (132.96-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x52c Stepping=12 Features=0x1bf real memory = 41943040 (40960K bytes) avail memory = 38813696 (37904K bytes) Initializing PC-card drivers: sio wdc Probing for devices on PCI bus 0: chip0 rev 2 class 60000 on pci0:0:0 chip1 rev 3 class 68000 on pci0:1:0 vga0 rev 211 class 30000 int a irq ?? on pci0:3:0 pcic0 rev 226 class 60500 int a irq ? on pci0:19:0 Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1 not found at 0x2f8 lpt0 at 0x3bc-0x3c3 irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface psm0 at 0x60-0x64 irq 12 on motherboard psm0: model Generic PS/2 mouse, device ID 0 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 1033MB (2116800 sectors), 2100 cyls, 16 heads, 63 S/T, 512 B/S wdc1 not found at 0x170 npx0 flags 0x1 on motherboard npx0: INT 16 interface pcic0 at 0x3e0-0x3e1 irq 11 flags 0x1 on isa PC-Card ctlr(0) Cirrus Logic PD-6729/6730 [i82365 compatible mode] (5 mem & 2 I/O windows) pcic0: slot 0 controller I/O address 0x3e0 pcic0: slot 1 controller I/O address 0x3e0 sb0 at 0x220 irq 5 drq 1 on isa Sb0: Intel Pentium F00F detected, installing workaround ========Kernel Config file is as follows ===================: # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: LTS.txt,v 1.1.1.1.2.1.6.1.2.2 1998/12/22 16:38:26 hosokawa Exp $ machine "i386" #cpu "I386_CPU" #cpu "I486_CPU" cpu "I586_CPU" #cpu "I686_CPU" ident THINKPAD maxusers 10 #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options NFS #Network Filesystem options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] #options SCSI_DELAY=15 #Be pessimistic about Joe SCSI device options "MAXMEM=(40*1024)" options BOUNCE_BUFFERS #include support for DMA bounce buffers options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options APM_PCCARD_RESUME options PCIC_RESUME_RESET #options SCSI_DETACH options ATAPI_DETACH config kernel root on wd0 controller isa0 #controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 #disk fd1 at fdc0 drive 1 # Unless you know very well what you're doing, leave ft0 at drive 2, or # remove the line entirely if you don't need it. Trying to configure # it on another unit might cause surprises, see PR kern/7176. tape ft0 at fdc0 drive 1 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 #disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr disk wd1 at wdc1 drive 0 #disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device wcd0 #IDE CD-ROM #device wfd0 #IDE floppy (LS-120) # A single entry for any of these controllers (ncr, ahb, ahc, amd) is # sufficient for any number of installed devices. #controller ncr0 #controller amd0 #controller ahb0 #controller ahc0 #controller dpt0 #controller bt0 at isa? port "IO_BT0" bio irq ? vector bt_isa_intr #controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr #controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr #controller aic0 at isa? port 0x340 bio irq 11 vector aicintr #controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr #controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr #ontroller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector sea intr #options DPT_MEASURE_PERFORMANCE # Required by DPT driver?? #options DPT_VERIFY_HINTR # Some hardware must have it! #options DPT_TRACK_CCB_STATES # Some hardware must have it! #options DPT_HANDLE_TIMEOUTS # Some hardware must have it! #options DPT_TIMEOUT_FACTOR=4 # Some hardware needs more #controller scbus0 #device sd0 #device od0 #See LINT for possible `od' options. #device st0 #device cd0 #Only need one of these, the code dynamically grows #device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr #device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr #controller matcd0 at isa? port 0x230 bio #device scd0 at isa? port 0x230 bio # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Mandatory, don't remove device npx0 at isa? port "IO_NPX" flags 0x1 irq 13 vector npxintr # # Laptop support (see LINT for more options) # device apm0 at isa? disable # Advanced Power Management options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS # Don't remove these two lines ! pseudo-device card 1 # PCCARD (PCMCIA) support #controller card0 device pcic0 at isa? port 0x3e0 flags 0x1 irq 11 vector pcicintr #device pcic1 at isa? port 0x3e2 device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device sio2 at isa? disable port "IO_COM3" tty irq 5 vector siointr device sio3 at isa? disable port "IO_COM4" tty irq 9 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr #device lpt1 at isa? port? tty #device mse0 at isa? port 0x23c tty irq 5 vector mseintr device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmin tr # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. #device de0 #device fxp0 #device tx0 #device vx0 #device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 vector edintr #device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 vector ieintr #device ep0 at isa? port 0x300 net irq 10 vector epintr #device ex0 at isa? port? net irq? vector exintr #device fe0 at isa? port 0x300 net irq ? vector feintr #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr #device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr #device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr #device cs0 at isa? disable port 0x300 net irq ? vector csintr # Audio Drivers controller snd0 device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr pseudo-device loop pseudo-device ether pseudo-device log pseudo-device sl 1 pseudo-device ppp 1 pseudo-device vn 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's pseudo-device speaker # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # This provides support for System V shared memory. # options SYSVSHM options SYSVSEM options SYSVMSG #options DDB =========================================================================== Name : Sakai Hiroaki (Miyauchi-Seki Lab., Kougaku-bu, Tokyo-Rika-Daigaku) (sakai@miya.ee.kagu.sut.ac.jp) Machine : DELL Latitude CP M166ST (CPU MMX Pentium 166MHz, HDD 4.0GB, RAM 32MB) FreeBSD : OK (2.2.7-RELEASE) Pccard Pkg: PAO-980913 APM BIOS : OK (APM BIOS version 1.1) Config Opt: APM_PCCARD_RESUME PCIC_RESUME_RESET PCIC : TI PCI-1131 [CardBus bridge mode] Cards : - Logitec LPM-LN20T (Ethernet Card) - Adaptic SlimSCSI APA-1460J =========================================================================== Name : Gerd Heber (heber@capsl.udel.edu) Machine : Toshiba SatellitePro 445 CDX (CPU Intel Pentium 133 MHz MMX, HDD 1.4 GB, RAM 32 MB) FreeBSD : No problem (2.2.6, 2.2.7) Pccard Pkg: PAO-980913 APM BIOS : No problem (1.1) Config Opt: NO PCIC : PC-Card ctlr(0) Intel 82365A/B (5 mem & 2 I/O windows) Cards : - 3Com Etherlink III, 3C589D - US Robotics Megahertz XJ-CC4288 =========================================================================== Name : Jeroen Ruigrok van der Werven (asmodai@wxs.nl) Machine : Dell Latitude CP (CPU Pentium MMX 233 MHz, HDD 2 GB, RAM 64 MB) FreeBSD : Have installed it a number of times OK (2.2.6, 2.2.7, 3.0-SNAP May) APM BIOS : The standard apm doesn't work, haven't tried the FORCE option yet (dunno) Config Opt: none Misc Info : Used the C/Port Replicator with it, works good, detects vx0, have yet to test it... =========================================================================== Name : Toshiyuki Kawashima (tos@fa2.so-net.ne.jp) Machine : Panasonic AL-N1T512J5 (CPU Pentium 120MHz, HDD 4GB, RAM 48MB) FreeBSD : OK (2.2.6-RELEASE) Pccard Pkg: PAO-980430 APM BIOS : OK (1.1) PCIC : Intel 82365 Cards : - Allied Telesis Ethernet Card LA-PCM - Microtech XpressDock #XpressDock card "Microtech International Inc." "IDE PCCARD" config default "wdc1" any 0x2000 cardio 0x170 0x10 insert echo XpressDock inserted remove echo XpressDock removed =========================================================================== Name : HASEGAWA Tomoki (thasegawa@mta.biglobe.ne.jp) Machine : Toshiba DynaBook Portege 660CDT/1.4 (CPU Pentium 150MHz, HDD 6.4GB(MK-6409MAV), RAM 80MB) FreeBSD : OK (2.2.7-RELEASE) Pccard Pkg: PAO-980913 APM BIOS : OK (1.1) PCIC : Intel 82365A/B Cards : - NOTEWORTHY NW288CR - TAXAN ICD-400PN (KME KXLC002) - NTT Personal Paldio Data Card DC-1P - NTT Personal Paldio Data Card DC-2P - Just Cooler for Notebook NB-100 - DATAFAB PCMMD2 # DATAFAB PCMMD2 card "DATAFAB" "PCMCIA-TO-IDE" config 0x2 "wdc2" any insert echo DATAFAB PCMMD2 inserted remove echo DATAFAB PCMMD2 removed Misc Info : To use PCMMD2 as wdc2 on this machine with the internal CR-ROM drive, it is necessary to rebuild a kernel with a configuration below. controller wdc2 at isa? port 0x160 bio irq 12 vector wdintr Just Cooler(an external fan) also work well without any drivers and configurations. =========================================================================== Name : SETA Takuji (sheta@kk.iij4u.or.jp) Machine : Toshiba DynaBook Satellite Pro 430CDS (CPU Pentium/P54C 120MHz, HDD 1.3GB/TOSHIBA MK1301MAV, RAM 48MB) FreeBSD : OK (2.2.7-RELEASE) Pccard Pkg: PAO-980913 APM BIOS : OK (1.1) Config Opt: APM_PCCARD_RESUME PCIC_RESUME_RESET SCSI_DETACH ATAPI_DETACH APM_BROKEN_STATCLOCK PCIC : Intel 82365A/B Cards : - AIWA PV-JF3360 - Adaptec SlimSCSI APA-1460J Misc Info : ESS ES688 Audio Drive(SoundBlaster Pro Compatible) default IRQ = 5 -> IRQ = 9 device sb0 at isa? port 0x230 irq 9 conflicts drq 3 vector sbintr zzz and shutdown -x command works good. =========================================================================== Name : Toru AKIYAMA (akiyama@ma1.seikyou.ne.jp) Machine : SUSTEEN S-NOTE (CHANDRA NP-30J) (CPU MMX Pentium 133MHz, HDD 1GByte, RAM 40MByte) FreeBSD : OK (FreeBSD 2.2.7) Pccard Pkg: PAO-snap-981102 APM BIOS : OK (1.2) PCIC : Texas Instruments PCI1130, Ricoh RF5C296 Cards : - BILLIONTON LNT-10TB Ethernet PCMCIA Adapter - Ratoc REX9530 - COREGA FastEther PCC-TX =========================================================================== Name : Masakazu Higaki (higaki@hq.kishou.go.jp) Machine : SHARP Mebius PC-PJ1 (CPU MMX Pentium 233MHz, HDD 3GB, RAM 64MB) FreeBSD : OK (2.2.7-RELEASE) Pccard Pkg: PAO-227-980908-snap APM BIOS : OK (1.1) Config Opt: APM_PCCARD_RESUME PCIC_RESUME_RESET ATAPI_DETACH "APM_NOSUSPEND_IMMEDIATE=3" APM_BROKEN_STATCLOCK PCIC : Ricoh RL5C475 PCI-CardBus Brige Cards : - 3Com Etherlink III 3C589B - IO DATA CBIDE bundled with CDP-FX24 (16bit mode only) # IO Data CBIDE (bundled with CDP-FX24, etc.) card "WIT" "IDE16" config default "wdc1" any insert echo IO Data CBIDE inserted remove echo IO Data CBIDE removed Misc Info : hybernation and suspend is OK.. but sometimes 3C589B(ep0) is not probed after resume. when operate PS/2 mouse after resume, kernel shows error messages: /kernel: psmintr: out of sync (0000 != 0008). /kernel: psmintr: out of sync (00c8 != 0008). : and not respond to mouse button. then uncomment #define PSM_HOOKAPM #define PSM_RESETAFTERSUSPEND in /sys/i386/isa/psm.c and recompile. using IO Data CBIDE, the dip switch on the card must be set 16bit mode. (not probed in CardBus mode) =========================================================================== Name : Osamu Matsuda (omatsuda@eng.hokudai.ac.jp) Machine : Hitachi Flora Prius Note 250 NU1 (CPU MMX Pentium 166MHz, HDD 2.1GB, RAM 32MB) FreeBSD : OK (2.2.5-Release) Pccard Pkg: PAO-snap-980317 APM BIOS : OK (1.1) PCIC : PCI-1131 Cards : - 3COM 3C589D - Panasonic TO-CAF56K Misc Info : 1) Disabled COM2, USB, and Sound devices. 2) Suspend does not work when the TO-CAF56K modem card is inserted. 3) Booting takes very long time (longer than 5 min) when the CD-ROM dri ve is presented. 4) XFree86 3.3.1 runs with 1024x768 mode. =========================================================================== Name : Yuishi Iwasaki (iwasaki@wisdom.dse.ibaraki.ac.jp) Machine : SHARP Mebius PC-PJ1 (CPU MMX Pentium 233MHz, HDD 3.2GB (1.3GB FreeBSD), RAM 64MB) FreeBSD : OK (2.2.7-RELEASE) Pccard Pkg: PAO-freebsd227-980805-snap.tar.gz APM BIOS : OK (1.1) PCIC : Ricoh RL5C475 CardBus Controller Cards : - 3Com Etherlink III 3C589D card "3Com Corporation" "3C589" config default "ep0" 10 insert echo 3Com Etherlink III inserted insert /etc/pccard_ether $device remove echo 3Com Etherlink III removed remove /etc/pccard_ether_remove $device Misc Info : Using FIPS(ver.1.5c) to split the harddisk partitions. Installing FreeBSD-2.2.7R from a DOS partition. XFree86 3.3.2 with XF86_SVGA-NeoMagic128V-2.2.6R.tgz for 800x600 screen (MeoMagic) is OK. =========================================================================== Name : Hiromichi Kawaguchi (guzi@imasy.or.jp) Machine : NEC PC-98 mobio NX MB12C (CPU MMX Pentium 120Mhz, HDD 1.6GB, RAM 48MB) FreeBSD : OK (FreeBSD 2.2.6R) Pccard Pkg: PAO-980430 APM BIOS : OK (APM BIOS version 1.1) PCIC : Cirrus Logic PD6710 Cards : - Kingmax Technology Inc. PCMCIA K56Flex # PCMCIA MAKER FM5600-LJ DataFax card "PCMCIA MAKER" "FM5600-LJ DataFax" config default "sio2" any reset 100 insert echo PCMCIA MAKER 56K modem inserted remove echo PCMCIA MAKER 56K modem removed =========================================================================== Name : Kenji Suzuki (kenji@po.ganseki.ne.jp) Machine : SONY VAIO 505G (PCG-505G) (CPU MMX Pentium 200MHz, HDD 2.1GB, RAM 64MB) FreeBSD : OK (2.2.6R) Pccard Pkg: 2.2.6-RELEASE (980629) APM BIOS : OK (1.1) PCIC : Intel 82365 (5 mem & 2 I/O windows) Cards : - 3Com Etherlink III 3C589D Misc Info : See http://www.inseki.gr.jp/~kenji/vaio505/ =========================================================================== Name : Kazuhiro Takahashi (kazuhiro@tsi.co.jp) Machine : ThinkPad 235 (Chandra II) (CPU MMX Pentium 233MHz, HDD 3.2GB, RAM 96MB) FreeBSD : OK (2.2.7-RELEASE) Pccard Pkg: PAO-snap-980805 APM BIOS : OK (APM 1.1 (APM 1.2 On Windows98)) PCIC : RICOH Cards : - Xircom CreditCard Ethernet 10/100+ Modem 56 (as modem) card "Xircom" "CreditCard Ethernet" config 0x27 "sio2" any insert echo Xircom CEM56 Card inserted as Modem remove echo Xircom CEM56 Card removed - TDK LAK-CD021AX NG-Cards : - IBM Portable Hard Disk Misc Info : I set PCIC mode by BIOS setup follow: PCIC 1,2: compatible (not CARD BUS) PCIC 3 : compatible (not ZV PORT) USB : not use IRQ - CEM56 dose not work as Ethernet card. It works good as modem over 28.8k speed. But sio driver sometimes hung with "over flow" message. So, to use ppp without overflow, I wrote ppp.conf follow: default: set device /dev/cuaa2 set speed 230400 - IBM Portable Hard Disk use "IDE Card". So I try to use it with the pccard.conf same as "IBM CD-20XSeries(IDE PC Card) " But it dose not work. - SUSPEND/RESUME problem After suspend/resume, kernel warns "calcru: negative time -XXXX". If it has happened, machine may un-stable. It seems a bug of CPU clock get routine in apm_default_resume() of apm.c. I add follow code for apm.c. (you can see it in Subject: [bsd-nomads:05690] sotec WinBookBird Message-ID: <97Oct16.182150jst.14979@gateway.suri.co.jp> ) and add the option "CLK_USE_I586_CALIBRATION". Then the problem does not occur with my chandra :-) *** apm.c.orig Tue Oct 14 11:10:04 1997 --- apm.c Thu Oct 16 12:31:32 1997 *************** apm_default_resume(void *arg) *** 396,401 **** --- 396,405 ---- log(LOG_NOTICE, "resumed from suspended mode\ "); } else { + bootverbose = 0; + startrtclock(); + cpu_initclocks(); + /* modified for adjkerntz */ pl = splsoftclock(); inittodr(0); /* adjust time to RTC */ =========================================================================== Name : FUJIMOTO, Kou Machine : Fujitsu FMV-5100 NL/T (CPU Pentium 100Mhz, HDD 810Mbyte, RAM 24Mbyte) FreeBSD : OK (2.2.6-RELEASE) APM BIOS : OK (1.1) PCIC : Cirrus Logic PD6729 Cards : - Megahertz XJ10BT - 3Com EtherLink III (3C589C) - Ricoh Flash ATA 5MB Misc Info : WIDE-dhcpc with Megahertz Ethernet card fails to negotiate with DHCP server while it succeeds with 3Com EtherLink III. Megahertz Ethernet card fails to ping to some other host with 10/100Base-TX NIC on the same subnet. Sound device (ESS1868) works well with Luigi's driver. =========================================================================== Name : Toru AKIYAMA (akiyama@ma1.seikyou.ne.jp) Machine : ThinkPad365XD (CPU Pentium 120MHz, HDD 1Gbyte, RAM 24MByte) FreeBSD : OK (FreeBSD 2.2.6) Pccard Pkg: PAO-snap-980720 APM BIOS : OK (1.1) PCIC : Intel 82365 Cards : - BILLIONTON LNT-10TB Ethernet PCMCIA Adapter card "Billionton" "LNT-10TB" config default "ed0" any insert echo BILLIONTON LNT-10TB Ethernet PCMCIA Adapter inserted insert /etc/pccard_ether $device remove echo BILLIONTON LNT-10TB Ethernet PCMCIA Adapter removed remove /etc/pccard_ether_remove $devic =========================================================================== Name : YAMAUCHI Hitoshi (yamauchi@is.uec.ac.jp) Machine : IBM ThinkPad 600 (model:2645-51J) (CPU PentiumII 266MHz, HDD 4GB, RAM 96MB) FreeBSD : Tips (2.2.6 PAO) APM BIOS : OK (APM BIOS version 1.1) Config Opt: (none) PCIC : TI-PCI-1250 (i82365 compatible mode) Cards : - Allied Telesis Ethernet LAN adapter (CentreCOM LA-PCM-T : NE2000 compatible) Misc Info : (I can not success the install when main memory size is larger than 64M with boot floppy of 2.2.5, 2.2.5+PAO, 2.2.6, 2.2.6+PAO, 2.2.7. I installed FreeBSD 2.2.6 with 32MB main memory and rebuild kernel with option "MAXMEM=97728". 97728 means 1024 * 96 - 576. Then, shutdown and equip 32MB + 64MB memory and then, FreeBSD will be work after rebooting.) =========================================================================== Name : Akihiro Uehara (u-akihir@ms.aist-nara.ac.jp) Machine : PC98-NX Lavie NX LT23/44A (CPU Pentium II 233MHz, HDD 3.2GByte, RAM 64MByte) FreeBSD : OK (2.2.6-RELEASE) APM BIOS : OK (1.1) Cards : - IC-CARD Ethernet =========================================================================== Name : Toshimitsu Miyake (miyake@nalgo.co.jp) Machine : Panasonic Let's note CF-S21 (CPU MMX Pentium 200MHz, HDD 3.2GB, RAM 96MB) FreeBSD : OK (FreeBSD-2.2.6R) APM BIOS : OK (APM BIOS version 1.1) PCIC : TI PCI-1250 [i82365 compatible mode] Cards : - 3Com Etherlink III PCMCIA 3C589D - MACNICA MIRACLE SCSI-II mPS110 =========================================================================== Name : Jun KOBAYASHI (jun@nextsolution.co.jp) Machine : FUJITSU FMV-5100NC/S (CPU Intel Pentium 100MHz, HDD 814M, RAM 32Mbytes) FreeBSD : NG (2.2.6R) APM BIOS : OK (1.1) PCIC : ed Cards : - Billionton LNT-10TB # Billionton EthernetPC card card "Billionton" "LNT-10TB" config default "ed0" any 0x10 insert echo Billionton Ethernet Card inserted insert /etc/pccard_ether $device remove echo Billionton Ethernet Card removed remove /etc/pccard_ether_remove $device =========================================================================== Name : Takashi SHIRAI (shirai@nintendo.co.jp) Machine : HITACHI Prius note 210g (RIOS SYSTEMS Chandra2) (CPU MMX Pentium 166MHz, HDD 2.1GB, RAM 96MB) FreeBSD : OK (2.2.6-Release) Pccard Pkg: PAO-980430 APM BIOS : OK (1.1) Config Opt: PCIC_IRQ=10 PCIC : RICOH RL5C475/RL5C476 Cards : - Planet Smart COM/3500 ENW-3500-T - Macnica Miracle SCSI-II mPS110 (for PIONEER PCP-PR1) NG-Cards : - IBM CD-400 (It can be used alone, but cannot be used with other cards) Misc Info : Recent PAO cannot use CardBus, to change setting of BIOS from "CardBus" to "PCMCIA compatible". But, BIOS setup is displayed with Japanese language, then those who cannot read Japanese will not be able to setup. When installing, you should choose "start kernel configuration..." and make the all unnecessary devices inactive, for killing the conflicted devices and plobing the SCSI CD-ROM. In config file, the line as "device pcic0" must be changed, from "irq 5" to "irq 9". =========================================================================== Name : Kenji Yamauchi (QYL01113@nifty.ne.jp) Machine : NEC mobio NX MB12 CUD (CPU MMX-Pentium-120MHz, HDD 1.6GB, RAM 32MB) FreeBSD : OK (2.2.6-RELEASE) Pccard Pkg: PAO-19980430 APM BIOS : OK (1.1) PCIC : Cirrus Logic PD6710 Cards : - TDK Ethernet LAC-CD021BX - NTT Personal Paldio Data Card DC-1S =========================================================================== Name : Kazunori Aoshima Machine : Compaq Contura aero 4/25 (CPU 486SX-25, HDD 500MHz, RAM 20MHz) FreeBSD : OK, but some APM and serial patches needed. (2.2.5R) Pccard Pkg: PAO-971207 APM BIOS : OK, but pathe need. (APM 1.1) Config Opt: options "CONTURA" PCIC : normal PCIC Cards : - D-Link DE-660 - IBM PCMCIA SCSI NG-Cards : - Contura aero PCCARD Floppydisk / Y-E data Misc Info : some patches needed. 2.2.6R PAO boot floppy cannnot work when install. PCIC device isn't work. =========================================================================== Name : Takuro Onoue (tomotaka@po.synapse.or.jp) Machine : Caravelle Topper (CPU AMD 5x86 PR75, HDD 810MB, RAM 36MB) FreeBSD : OK (2.2.1-RELEASE) APM BIOS : OK (1.1) PCIC : RICOH RF5C396 Cards : - MACNICA MIRACLE SCSI II mPS-110 - TDK3313BZ =========================================================================== Name : Tomoyuki SUZUKA (suzuka@spa.is.uec.ac.jp) Machine : HITACHI Flora 210 NL2 (Chandra 2) (CPU MMX Pentium 166MHz, HDD 2.1GB, RAM 32MB) FreeBSD : OK (2.2.6-RELEASE) Pccard Pkg: PAO-980430 APM BIOS : OK (1.1) PCIC : Intel 82365 compatible Cards : - Planet Smart COM 3500 - Laneed Ethernet Card - SII PHS DATA 32S - IO DATA PCFDC2-ADP(SmartMedia adapter) =========================================================================== Name : Yoshiaki UCHIKAWA (yoshiaki@kt.rim.or.jp) Machine : Libretto 70/CT (CPU MMX Pentium 120MHz, HDD 1.6GB (IBM DDLA-21620), RAM 32MHz) FreeBSD : OK (2.2.6R) Pccard Pkg: PAO-980430 APM BIOS : OK (1.1) PCIC : Intel 82365 Cards : - ELECOM Laneed LD-CDY Misc Info : device pcm0 at isa? port ? tty irq 5 drq 1 flags 0x0 vector pcmintr Luigi's Sound driver(pcm0) can work. pcm0 at 0x530 irq 5 drq 1 flags 0xa200 on isa mss_attach 0 at 0x530 irq 5 dma 1:1 flags 0xa200 =========================================================================== Name : AOYAGI Yoichi (ao@mo.cs.toyo.ac.jp) Machine : TOSHIBA Satellite Pro 430CDT (CPU pentium 120 MHz, HDD 1.3GB, RAM 48 MB) FreeBSD : OK (2.2.6-RELEASE) Pccard Pkg: PAO-980614 APM BIOS : OK Cards : - CyQ've ELA-010 10BASE-T LAN Card card "CyQ've" "ELA-010" config default "ed0" any 0x10 insert echo CyQ've ELA-010 LAN card inserted insert /etc/pccard_ether ed0 remove echo CyQ've ELA-010 LAN card removed remove /sbin/ifconfig ed0 delete =========================================================================== Name : KIZAKI Yoshio (GFG01633@nifty.ne.jp) Machine : Toshiba Libretto30 (CPU DX4(100MHz) equivalent, HDD 1.6GB(IBM-DDLA-21620), RAM 20MB) FreeBSD : OK (2.2.5) Pccard Pkg: PAO-971211 APM BIOS : OK (1.1) PCIC : Intel 82365 Cards : - REX5536M card "PCMCIA SCSI2 CARD" "01" config 0x5 "stg0" any 0 insert echo REX5536M inserted remove echo REX5536M removed - LAK-CD021BX =========================================================================== Name : Noriaki Mitsunaga (mitchy@er.ams.eng.osaka-u.ac.jp) Machine : MITSUBISHI apricot FX(M3484-B1C0) (CPU Pentium 120MHz, HDD 810MB, RAM 40MB) FreeBSD : OK (FreeBSD 2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : NG (1.1) PCIC : Cirrus Logic PD672X Cards : - TDK LAK-CD021 - TDK LAK-CD021BX Misc Info : While installing I disabled the sound device. Executing apm command makes panic. But can suspend with suspend button(not apm -z). Cannot power off with shutdown -x. Sound device was set with BIOS to use I/O address to 0x220-, irq to 9, 8bit DMA to 1 and 16bits DMA to 5. =========================================================================== Name : Susumu Harano (harano@astec.co.jp) Machine : Libretto 100CT PA1254C9 (CPU Pentium MMX 166MHz, HDD 2.1GB, RAM 32MB+32MB) FreeBSD : OK (2.2.6-RELEASE) Pccard Pkg: PAO-980430 APM BIOS : OK PCIC : Intel 82365 Cards : - Corega Ether PCC-T =========================================================================== Name : Ken Seggerman (suleyman@echonyc.com) Machine : Toshiba Satellite 305CDS (CPU Pentium 486, HDD 1.51 GB (1547 MB Windows95 PriDOS 496 MB FreeBSD, 16 MB ExDOS), RAM 80 MB) FreeBSD : No problem, Installed from CD and re-installed from PAO-boot.flp (Version number of FreeBSD) Pccard Pkg: PAO-boot.flp for 2.2.5 APM BIOS : No problem PCIC : Toshiba ToPIC97 CardBus Controller NG-Cards : - Copied "Xircom" "CreditCard Modem Ethernet" section from pccard.conf.sample, and altered product string to match probed string "Xircom" "CreditCardModem CM-56T" but does not work. Error: pccard[41] no card on database... Xircom CreditCard Modem CM-56 I tried changing the card line in conf to match my modem, and tried it the original way. I left everything else alone. User PPP accessed the modem without complaint, there was no dial tone, the lights on the modem cable dongle did not light up and User PPP reported: dial failed Misc Info : I was very encouraged to see an entry in the pccard.conf.sample for a Xircom Modem, but could not get it to work. I am about to give up and get myself another modem for the laptop. Any advice would be welcome. Thank you. =========================================================================== Name : Ryusuke Kikuchi (kikuchi@grad.sccs.chukyo-u.ac.jp) Machine : Panasonic Let's note AL-N2T520J5 (CPU MMX Pentium 200MHz, HDD 2.1GB, RAM 32MB) FreeBSD : OK (2.2.6-RELEASE) APM BIOS : OK (1.1) PCIC : Intel 82365 Cards : - Telecom Device SuperSocket RE450T card "Telecom Device K\\.K\\." "SuperSocket RE450T" config 0x2 "ed0" any # ether 0x110 09:57:42 insert echo Telecom Device SuperSocket RE450T inserted insert /etc/pccard_ether $device remove echo Telecom Device SuperSocket RE450T removed remove /etc/pccard_ether_remove $device - Adaptec SlimSCSI =========================================================================== Name : kondo hiroshi (kondo@csctk.jcsnet.ro.jp) Machine : FMV-5133NP5/W (CPU Pentium-133, HDD 1.2G, RAM 32M) FreeBSD : OK (FreeBSD2.2.6-RELEASE) PCIC : TI PCI-1130 Cards : - 3C589C - 3C589D-COMBO =========================================================================== Name : namiki takeo (namiki@din.or.jp) Machine : Toshiba Libretto-20 (CPU AMD Am486DX4/75MHz, HDD 258MB, RAM 16MB (8+8)) FreeBSD : OK (2.2.6) Pccard Pkg: boot-ja-pao-980517.flp APM BIOS : OK Cards : - NEC PC-9801N-J03 - Megahertz XJ10BT =========================================================================== Name : Katsuhiro OGUCHI Machine : PC-9821 la10 (CPU Intel Pentium 100MHz, HDD 810M, RAM 40MB) FreeBSD : OK (2.2.1) APM BIOS : OK (1.11) Cards : - REX-5535 =========================================================================== Name : Tatsuya TANIKAWA (tanikawa@fs.kyoto.omronsoft.co.jp) Machine : TOSHIBA DynaBook SS-R 575 (CPU Pentium 75MHz, HDD 2067MB / TOSHIBA MK2103MAV, RAM 40MB) FreeBSD : OK (2.2.6-RELEASE) Pccard Pkg: PAO-980430 APM BIOS : OK (1.0 compatible mode) Config Opt: APM_PCCARD_RESUME PCIC_RESUME_RESET SCSI_DETACH PCIC : Intel 82365 (or clones) Cards : - AIWA PV-JF144 - I-O DATA DATA/FAX MODEM PCML-336 - Adaptec SlimSCSI APA-1460 - D-link DE-650 Ethernet Card - Microtech XpressDock # Microtech XpressDock card "Microtech International Inc\\." "IDE PCCARD" config default "wdc1" any cardio 0x170 0x10 insert echo Microtech XpressDock inserted remove echo Microtech XpressDock removed =========================================================================== Name : Shinji Kitamoto (skitamoto@odp.co.jp) Machine : SHARP MN-5100D (CPU Pentium 133, HDD 1.4GB, RAM 32MB) FreeBSD : OK (2.2.6) Pccard Pkg: PAO-980430 APM BIOS : OK (1.1) PCIC : Cirrus Logic PD6729/6730 Cards : - 3Com 3C589D - Accton EN2216 =========================================================================== Name : Hiroshi Kawakubo (hiroshi.kawakubo@nifty.ne.jp) Machine : SONY VAIO PCG-505EX (CPU MMX Pentium 233MHz, HDD 2.1GB, RAM 32MB) FreeBSD : OK (2.2.6-RELEASE) Pccard Pkg: PAO-980430 APM BIOS : OK (1.1) PCIC : Intel 82365 Cards : - Adaptec SlimSCSI APA-1460A =========================================================================== Name : Noriyuki KOIZUMI (fwih8471@mb.infoweb.ne.jp) Machine : Toshiba Libretto 50 (CPU Pentium 75MHz, HDD 1.6GB, RAM 32MB) FreeBSD : OK (FreeBSD-2.2.6-RELEASE) Pccard Pkg: PAO-980430 APM BIOS : OK (1.1) Config Opt: LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET, SCSI_DETACH, APM_NOSUSPEND_IMMEDIATE=3, APM_BROKEN_STATCLOCK PCIC : Intel 82365 (or clones) Cards : - 3Com 3C589C - U.S. Robotics XJ5560 - NTT Personal Paldio Data Card DC-1P - Adaptec SlimSCSI APA-1460AJ - Intel EtherExpress(TM) PRO/100 LAN/Modem PC Card Adapter (as modem) card "Intel" "EtherExpress\\(TM\\) PRO/100 LAN/Modem PC Card Adapter" config 0x1f "sio2" any insert echo Intel EtherExpress PRO/100 LAN/Modem as Modem remove echo Intel EtherExpress PRO/100 LAN/Modem =========================================================================== Name : Hiroaki Goto (gorry@shonan.ne.jp) Machine : TOSHIBA Libretto 50 (CPU Pentium 75MHz, HDD 800MB, RAM 32MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (1.1) PCIC : Intel 82365 Cards : - ICM PSC-2401 (SCSI card) - corega Ether PCC-T card "corega K.K." "corega Ether PCC-T" config default "ed0" any insert echo corega Ether PCC-T insert /etc/pccard_ether $device remove echo corega Ether PCC-T removed remove /etc/pccard_ether_remove $device =========================================================================== Name : Robert S. Hibi (hibi@med.kurume-u.ac.jp) Machine : Chandler (Frontier Kojiro) (CPU Pentium 120MHz, HDD 800MB, RAM 64MB (+ alpha)) FreeBSD : OK (2.2.5-RELEASE) APM BIOS : OK (1.1) PCIC : Intel 82635 (or clones) Cards : - 3Com Etherlink III 3C589D - adaptec SlimSCSI Misc Info : Just a thing necessary for the installation was to imput "flags npx0 0x01" and "quit" in UserConfig CLI mode. -> Thanks Tatsumi. =========================================================================== Name : Motomichi Masuzaki (mzaki@e-mail.ne.jp) Machine : Libretto 70 (CPU Pentium MMX 120MHz, HDD 1.6G, RAM 32M) FreeBSD : needs some tips described below (2.2.5) APM BIOS : OK (1.1) Cards : - Panasonic LK-RM864D - SuperSocket RE-450T - SII MC-6530 - PLANET COMMUNICATIONS ENW-3501-T =========================================================================== Name : Naoya Takahashi (takahasi@swift.phys.s.u-tokyo.ac.jp) Machine : SONY VAIO PCG-505X (CPU Intel Pentium MMX 166MHz, HDD 2GB, RAM 32MB) FreeBSD : OK (2.2.5R) Pccard Pkg: PAO-971211 APM BIOS : OK (1.1) PCIC : Intel 82365 (or clones) Cards : - TDK LAK-CD021AX - Adaptec SlimSCSI(APA-1460J) =========================================================================== Name : Ken-ichi Suzuki (ksuzuki@miyagi-ct.ac.jp) Machine : TOSHIBA Libretto 30 (CPU 486DX4(100MHz), HDD 1.6MB, RAM 16MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (1.1) Config Opt: APM_PCCARD_RESUME PCIC_RESUME_RESET Cards : - Relia PCMCIA Ethernet Adapter card "PCMCIA LAN" "Ethernet" config default "ed0" any insert echo Relia PCMCIA LAN inserted insert /etc/pccard_ether $device remove echo Relia PCMCIA LAN removed remove /etc/pccard_ether_remove $device - Megahertz 56k pccard modem CC1560J =========================================================================== Name : Mori Takusi (tak_mori@kh.rim.or.jp) Machine : SOTEC WinBook Bird S3P133 (CPU Pentium 133MHz, HDD 776MB (680MB: FreeBSD, 96MB:DOS), RAM 48MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: Boot PAO flp (version: 971211?) -- I get it 03/97 from http://www.jp.freebsd.org/PAO/ APM BIOS : ? -- After resumption from suspending, CPU speed becomes very slowly. (1.1) Config Opt: none (I used default PAO config) Cards : - KME SCSI PCMCIA (KXLC002) # KME (TAXAN ICD-400PN, etc.) card "KME" "KXLC002" config 0x24 "ncv0" any 0xb4d00000 insert echo KME SCSI PCMCIA Card inserted remove echo KME SCSI PCMCIA Card removed Misc Info : First, from DOS partition, I installed /bin ,/compat* and /src/sys with Boot PAO flp, and compiled & installed PAO kernel, and edit /etc/pccard.conf. Then (after reboot), form CDROM which is connected to PCMCIA SCSI card, I could instrall the rest. =========================================================================== Name : Takafumi Yabunaka (yabunaka@mb.infoweb.ne.jp) Machine : Fujitsu FMV-475NL/S (CPU i486DX 75MHz, HDD 1.3GB / Toshiba MK1301MAV, RAM 24MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (1.0) PCIC : Cirrus Logic PD-6710 Cards : - 3Com EtherLink III LAN PC Card 3C589D - Megahertz Ethernet LAN Adapter XJ10BT - Telecom Device Super Socket RE450T # Telecom Device SuperSocket RE450T card "Telecom Device K.K." "SuperSocket RE450T" config 0x3 "ed0" any insert echo Telecom Device SuperSocket RE450T inserted insert /etc/pccard_ether $device remove echo Telecom Device SuperSocket RE450T removed remove /etc/pccard_ether_remove $device - TDK Data/Fax Modem DF2814B/M - KYOEI DATA/FAX MODEM S-336FM # KYOEI CO., LTD. SHURIKEN FAX MODEM S-336FM card "KYOEI CO., LTD." "S-336FM" config 0x23 "sio2" any reset 1000 insert echo KYOEI SHURIKEN MODEM inserted remove echo KYOEI SHURIKEN MODEM removed - OMRON Data/Fax Modem ME3314C-D # OMRON Data/Fax Modem ME3314C-D card "OMRON" "Modem w DPI ME3314C-D" config 0x23 "sio2" any reset 1000 insert echo OMRON Data/Fax Modem ME3314C-D inserted remove echo OMRON Data/Fax Modem ME3314C-D removed - TDK ISDN Adapter DN1280 # TDK ISDN Adapter DN1280 card "TDK" "DN1280" config 0x22 "sio2" any reset 1000 insert echo TDK ISDN Adapter DN1280 inserted remove echo TDK ISDN Adapter DN1280 removed - NTT DoCoMo Digital Data/Fax 9600 Mark II - NTT DoCoMo Personal Paldio Data Fax Card DC-1S ## NTT Personal Paldio Data Card DC-1S card "NTT Personal" "Paldio Data/Fax Card" "DC-1S" config 0x22 "sio3" 11 0x40000 insert echo NTT Personal Paldio Data Card DC-1S inserted remove echo NTT Personal Paldio Data Card DC-1S removed - NTT DoCoMo Personal Paldio Data Fax Card DC-2N - SII PHS DATA 32S MC-6530 # SII PHS DATA 32S MC-6530 card "SII" "PHS DATA 32S" config 0x23 "sio2" any insert echo SII PHS DATA 32S inserted remove echo SII PHS DATA 32S removed =========================================================================== Name : Ibrahim Korpeoglu (korpe@cs.umd.edu) Machine : Dell Latitude XPi CD (CPU Pentium 150 Mhz, HDD 1.443 GB, RAM 32 MB) FreeBSD : OK (2.2.2) Pccard Pkg: PAO package for 2.2.2 APM BIOS : OK Config Opt: Machine-depend "options" in config file PCIC : TI PCI-1131 CardBus Controller Cards : - 3Com EtherLink-III 3C589D - Lucent WaveLAN PCMCIA Wireless Card Misc Info : - wlp0 can not be started automatically =========================================================================== Name : Koji Mochizuki (k-mochy@tb3.so-net.ne.jp) Machine : Toshiba Portege 620CT (CPU Pentium 100MHz, HDD 1.2GM, RAM 40MB) FreeBSD : OK (2.2.5-Release) Pccard Pkg: PAO-971211 APM BIOS : OK (1.1) PCIC : Intel 82365 Cards : - Adaptec SlimSCSI APA-1460 - TDK DF2814B/M - D-Link DE-650 Ethernet Card - Kingston KNE-PCM/x Ethernet =========================================================================== Name : Sakai Hiroaki (Miyauchi-Seki Lab., Kougaku-bu, Tokyo-Rika Daigaku.) (sakai@miya3f01.ee.kagu.sut.ac.jp) Machine : Dell Latitude CP M166ST (CPU MMX-Pentium 166MHz, HDD 4.0GB (1.6G:Win95, 1.3G:FreeBSD (40M:/, 80M:swap, 32M:/var, 1120M:/usr), 570M:reserved for Linux, 510M:/home (for FreeBSD & Linux)), RAM 32MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (1.1) Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET APM_NOSUSPEND_IMMEDIATE=3 PCIC_TI113X_FUNC PCIC : TI PCI1 131 CardBus Cards : - Logitec LPM-LN20T (Ethernet Card) =========================================================================== Name : Hiroshi Tanaka (te194096@cse.ec.kyushu-u.ac.jp) Machine : TOSHIBA DynaBook SS450 (CPU i486SX2 50MHz, HDD 340MB, RAM 8MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-ready FreeBSD Installation Floppy APM BIOS : OK (1.0) PCIC : Intel 82365(or clone) Cards : - D-link DE-660 =========================================================================== Name : HONDA Yasuhiro (honda@kashio.info.mie-u.ac.jp) Machine : Sony VAIO PCG-729 (CPU MMX Pentium 266MHz, HDD 4GB, RAM 64MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (1.1) Config Opt: PCIC_TI113X_FUNC PCIC : TI PCIC-1131 PCMCIA/CardBus bridge Cards : - 3Com 3C589D-J-TP =========================================================================== Name : Masataka Okubo (okubo@mbox.kyoto-inet.or.jp) Machine : Toshiba Libretto60CTA (CPU Pentium 100MHz, HDD 777MB (Toshiba MK0803MAT), RAM 16MB) FreeBSD : OK (2.2.5-Release) Pccard Pkg: PAO-2.2.5-Release APM BIOS : OK (1.1) Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET PCIC : Intel 82365 Cards : - IBM PCMCIA SCSI Card - AI Brain PCMCIA Type2 Ethernet Adapter (CeLAN EPCMCIA-T PnP) NG-Cards : - SOTEC MU-2000 (SCSI CD-ROM Adapter) - Globalvilalge PowerPort Platinum Pro (For macintosh :-)) =========================================================================== Name : Kouji SATO (skouji@isl.melco.co.jp) Machine : MITSUBISHI Pedion M3041 (CPU MMX Pentium 233MHz, HDD 1GB, RAM 64MB) FreeBSD : FTP install using boot.flp included in 2.2.1R-distribution. (2.2.5R) APM BIOS : OK (1.1) Config Opt: LAPTOP PCIC_TI113X_FUNC PCIC : TI PCI-1131 PCMCIA/CardBus Bridge Cards : - 3Com 3C589B (Ethernet) card "3Com Corporation" "3C589" config default "ep0" 10 insert echo 3Com Etherlink III inserted insert /etc/pccard_ether $device remove echo 3Com Etherlink III removed remove /etc/pccard_ether_remove $device - TDK DF2814B/M (Modem) card "TDK" "DF2814.*" config 0x22 "sio2" 5 reset 1000 insert echo TDK 28.8K modem inserted remove echo TDK 28.8K modem removed - NTT DoCoMo PCMCIA DATA/FAX Adapter (96P1) card "NTT DoCoMo" "PCMCIA DATA/FAX.*" config 0x22 "sio2" 5 insert echo TDK 28.8K modem inserted remove echo TDK 28.8K modem removed =========================================================================== Name : M. Meiarashi (------) Machine : Toshiba Portege 620CT (US version) (CPU Pentium 100MHz, HDD 2GBytes (TOSHIBA MK2103MAV), RAM 40MBytes) FreeBSD : OK (2.2.5) Pccard Pkg: PAO-19971211 APM BIOS : OK (1.1) PCIC : Intel 82365 (or clones) Cards : - NTT DOCOMO DATA/FAX CARD 9600 MarkII - NTT MOBILE DP CARD 2896 P DIGITAL (as modem) - Planet SmartCom CreditCard 2000 - IBM Smart Caputre Card II - AIWA PV-JF288 - Adaptec Slim SCSI Misc Info : On the above mentioned DoPa-enabled card; It worked with "data mode." No test has been made for "packet mode." =========================================================================== Name : Kaoru Imuta (imu@ff.iij4u.or.jp) Machine : SONY vaio PCG-505 (CPU MMX Pentium 133MHz, HDD 1GByte, RAM 60Mbyte) FreeBSD : OK (2.2.1-RELEASE) APM BIOS : OK (1.1) PCIC : Intel 82365 or clones Cards : - NTT DoCoMo Mobile Data Card 96P1 config 0x23 "sio2" any =========================================================================== Name : Imai Kiyosi (imai@frei.cs.uec.ac.jp) Machine : Libretto 70CT PA1260C9 (CPU Pentium MMX 120MHz, HDD 1.6G, RAM 32M) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (1.1) Cards : - ELECOM Laneed LD-CDY =========================================================================== Name : Tetsushi Nakai (-----) Machine : IBM ThinkPad 535E (CPU MMX Pentium 150 MHz, HDD 1.6G, RAM 48M) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (1.1) Config Opt: PCVT_SCANSET=2 PCIC : Cirrus Logic PD-6729/6730 Cards : - D-Link 650-T Ethernet - Adaptech SlimSCSI APA-1460A =========================================================================== Name : Ryo MIYAMOTO (rmiya@cc.hirosaki-u.ac.jp) Machine : TOSHIBA Libretto 70 CT (CPU MMX Pentium 120MHz, HDD 1.6GB (1GB for FreeBSD, 500MB for Win95, 30MB for Hibernation ), RAM 32MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (1.1) Config Opt: Default for PAO, such as: LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET, SCSI_DETACH, APM_NOSUSPEND_IMMEDIATE=3, SCSI_LOW, APM_BROKEN_STATCLOCK PCIC : Intel 82365 (or clones) Cards : - MELCO IFC-DC - Logitec LPM-LN20T Misc Info : * Hibernation mechanism works very good by zzz command, power button, and closing LCD panel. * `Logitec LPM-LN20T' works as: pccardd[38]: Card "Logitec"("LPM-LN20T") matched "Logitec" ("LPM-LN20T") ed0: address xx:xx:xx:xx:xx:xx, type NE2000 (16bit) * `MELCO IFC-DC' works as: pccardd[38]: Card "RATOC System Inc."("SCSI2 CARD 37") matched "RATOC System Inc." ("SCSI2 CARD.*") probe ncv attach ncv ncv0: try to reset scsi bus ... =========================================================================== Name : Greg Minshall (minshall@fiberlane.com) Machine : IBM ThinkPad 560x (CPU 233 MHz Pentium, HDD 4GB, RAM 32MB) FreeBSD : Installed fine. (2.2.5.) Pccard Pkg: PAO-971211 APM BIOS : Doesn't "just work". I haven't tried to see what to do to make it work. Cards : - 3COM 3C589. - IBM IDE PC Card (for 20X CDROM) =========================================================================== Name : TAKABA Toshiharu Machine : digital HiNote Ultra II (CTS5120) (CPU Pentium 120MHz, HDD 2 G Bytes, RAM 40 M Bytes) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (APM BIOS version 1.1) PCIC : Cirrus Logic PD672X Cards : - 3Com EtherLink III 3C589C Misc Info : Not work MicroDock PCMCIA-IDE Interface card (MICROTECH INTERNATIONAL, INC.) =========================================================================== Name : Junya Nakata (tarou@cc.tuat.ac.jp) Machine : ThinkPad370C (CPU DX4 75MHz, HDD 540MB (FreeBSD only), RAM 4MB+16MB=20MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (1.1) Config Opt: LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET, APM_BATT_LOW_SUSPEND, APM_NOSUSPEND_IMMEDIATE=3 PCIC : Intel 82365 (or clones) (5 mem & 2 I/O windows) Cards : - IBM Creditcard Ethernet II Misc Info : TrackPointII is recongnized as PS/2. And working modeline is following. Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 =========================================================================== Name : Hiroshi Takeuchi (takeuchi@bear.aero.cst.nihon-u.ac.jp) Machine : Toshiba Portege 300CT 1.6 (US Version) (CPU MMX-Pentium 133MHz, HDD 1.6GB, RAM 64MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (1.2(Recognized as 1.1)) PCIC : ToPIC(Toshiba Propietary) Cards : - Adaptec SlimSCSI APA-1460J - Adaptec SlimSCSI APA-1460A - Accton EN2212 Ethernet - TDK LAK-CD021AX Ethernet - Megahertz XJ3288 FAX/Modem card "Megahertz" "XJ3288-81" config 0x23 "sio1" any insert echo Megahertz XJ3288-J Modem inserted remove echo Megahertz XJ3288-J Modem removed - IBM SmartCaptureCard II Misc Info : Needs to set BIOS PC-Card Mode to PCIC Compatible mode. Resume does NOT work well WITHOUT sound devices(sb0,opl0) config. Toshiba CD-ROM Dock works fine. =========================================================================== Name : Sugimoto Sadahiro (g640678@komaba.ecc.u-tokyo.ac.jp) Machine : SHARP Mebius MN-5500 (CPU MMX Pentium 150MHz, HDD 1.6GB (Win95:800MB, FreeBSD:700MB), RAM 32MB) FreeBSD : OK (2.2.5-RELEASE) APM BIOS : OK (1.1) Config Opt: options "PCIC_TI113X_FUNC" PCIC : TI PCI-1131 CardBus Controller Cards : - RATOC REX-9530 (SCSI-2) irq 7 11 - IO-DATA PCLA/T (Ethernet) Misc Info : I can not use "IRQ 10" for pccard. =========================================================================== Name : Kodama Syuji (kodama@po.cmp-lab.or.jp) Machine : Canon INNOVA 3600 (CPU MMX Pentium, HDD 1.2GB, RAM 320MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : FORCE_APM10 (1.1) Config Opt: device sb0 at isa? port 0x220 irq 5 conflicts drq 1 vector sbintr device opl0 at isa? port 0x38a PCIC : TI PCI-1130 CardBus Controller =========================================================================== Name : Shuichi NAKAMURA (shuzo@cis.canon.co.jp) Machine : COMPAQ CONTURA AERO 4/33C (CPU i486SX 33MHz, HDD 1.3GB, RAM 20MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211(OK) APM BIOS : OK (1.1) Config Opt: LAPTOP CONTURA COM_IRQ_BUG APM_PCCARD_RESUME PCIC_RESUME_RESET "APM_BATT_LOW_SUSPEND" "APM_NOSUSPEND_IMMEDIATE=3" PCIC : VLSI 82C146 Cards : - 3Com EtherLINK III(3C589B) card "3Com Corporation" "3C589" config　default "ep0" any insert　echo 3Com Etherlink III inserted insert　/etc/pccard_ether $device insert　/sbin/ifconfig $device inet 192.168.0.3 netmask 255.255.255.0 broadcast 192.168.0.255 insert　/sbin/route add default 192.168.0.1 remove　echo 3Com Etherlink III removed remove　/sbin/route delete default remove　/sbin/ifconfig $device down remove　/etc/pccard_ether_remove $device Misc Info : In detail, see http://www.asahi-net.or.jp/~WR7S-NKMR/FreeBSD/AERO/2.2.5/install.htm http://www.asahi-net.or.jp/~WR7S-NKMR/FreeBSD/AERO/2.2.5/reconfig.htm (sorry but, in Japanese) Enjoy! =========================================================================== Name : YOSINAGA, Naritosi (honey@tka.att.ne.jp) Machine : Panasonic Let's note mini AL-N4T512J5 (CPU MMX Pentium 120MHz, HDD 1.6GB, RAM 80MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (1.1) PCIC : Ricoh RL5C476 Cards : - D-Link DE-660 Ethernet Card - TDK DF5600 Misc Info : TDK DF5600 hangs by apm -z =========================================================================== Name : Yoshinobu Inoue (-----) Machine : Panasonic Let's Note AL-N4T512J5 (CPU MMX Pentium 120MHz, HDD 1.6GB (1GB:FreeBSD, 400MB:win95, 100MB:hybernation), RAM 16MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (1.1) Config Opt: no change from default PCIC : ?? Cards : - 3Com Etherlink III 3C589D - TDK DF5600/J DATA/FAX Modem Misc Info : suspend/resume and hybernation/resume is OK when 3Com PCCARD is set. There is small problem for suspend/hybernation when TDK PCCARD is set. It is that the machine freeze 45 to 50 seconds after suspend/hybernation, but after that it successfully suspend/hybernate. However, if someone resumes, it suddenly begins hybernation again. And next resume will success. But sometimes PCCARD is not recognized at the 2nd resume. If you unset and set it, then it is recognized. And as other information, I tried a BIOS confuguration that power off PCCARD between suspend, and that also seems to be OK. XFree86 worked at VGA resolution with Chipset NeoMagic configuration. Acceralated X also worked at 800x600 and color depth 16. The hardware hot keys, "Fn" + ”F1-F10" also worked under FreeBSD and it can control display, speaker, low electricity mode, hybernation, battery left, etc. =========================================================================== Name : Kayoko, Okamoto (okamoto@mach.kokusaidenki.co.jp) Machine : ThinkPad 560 (CPU Pentium-100MHz, HDD 2.1G(Windows95 500MB, FreeBSD 1600MB), RAM 24MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (1.2) PCIC : Cirrus Logic PD6729 Cards : - TDK Ethernet LAC-CD021AX - Adaptec SlimSCSI APA-1460J - TDK DF3314E - Sicon Peripheral PCMCIA ATA/ATAPI Adapter card "Sicon Peripheral" "PCMCIA ATA/ATAPI Adapter" config default "wdc1" any insert echo Sicon Peripherals inserted remove echo Sicon Peripherals removed =========================================================================== Name : Shun-ichi Kobayashi (koba@nakisuna1.kuciv.kyoto-u.ac.jp) Machine : NEC mobio NX MB12C (CPU MMX Pentium 120 MHz, HDD 1.6GB / IBM DDLA-21620, RAM 32MB) FreeBSD : OK (2.2.2-RELEASE) APM BIOS : OK (1.1) PCIC : Cirrus Logic PD6710 Cards : - Buffalo IFC-DC2 (SCSI2) aic0 (Adaptec APA-1460) =========================================================================== Name : Mark Andres (mark@giganet.net) Machine : IBM Thinkpad 220 (CPU i386SL 16Mhz, HDD 1.4GB, RAM 10MB) FreeBSD : OK (3.0-current) APM BIOS : OK (?) Config Opt: LAPTOP PCIC : Intel 82365 Cards : - 3Com Etherlink 3C589D card "3Com Corporation" "3C589D" config 0x1 "ep0" 10 insert echo 3Com Etherlink III inserted insert /etc/pccard_ether ep0 link0 -link1 insert /sbin/route add default 10.0.0.1 remove echo 3Com Etherlink III removed remove /sbin/ifconfig ep0 delete NG-Cards : Megahertz XJ1144 Misc Info : I have X running, but very slowly. See my homepage for my TP220 at http://www2.giganet.net/~mark/FreeBSD/tp220.html =========================================================================== Name : Yoshisuke Kato (kato@msa.co.jp) Machine : SHARP Mebius MN-5500 (CPU MMX Pentium-150MHz(OverClock 200MHz), HDD 1.6GB, RAM 64MB) FreeBSD : OK (2.2.5-RELEASE + PAO-971211) APM BIOS : OK (1.1) PCIC : TI PCI1131 Cards : - Megahertz XJ10BT - IO-DATA PC-INS128 (ThunderCard DD1280 Firmware ver1.5) # NTT-IT ThunderCard card "NTT Intelligent Technology Co., Ltd." "ThunderCard DD128" config 0x22 "sio2" any 0x80 reset 1000 insert echo Thunder-card inserted remove echo Thunder-card removed - REX 5535 SCSI - TDK DF1414 MODEM =========================================================================== Name : ABE Masayuki (pzr@kw.netlaputa.ne.jp) Machine : HITACHI FLORA-NL1 (CPU Pentium(100MHz), HDD 1GB(TOSHIBA MK1004MAT), RAM 40MB(HAGIWARA SYS-COM HSC-HA3032K)) FreeBSD : tips: can't use IRQ 10 with slot 0, 1 (FreeBSD-2.2.5-RELEASE) Pccard Pkg: PAO-971211 APM BIOS : OK (1.1) PCIC : ctlr(0) TI PCI-1130 [i82365 compatible mode], ctlr(1) Intel 82365 (or clones) Cards : - IBM Double Jack Modem(Data 28.8/Fax14.4) - IBM SCC II (with xscc-0.21) - PCI ENW-3500 - 3Com 3c589B - INTEGRAL PERIPHERALS Viper 340 =========================================================================== Name : Hidetoshi Yanai (yanai@trcj.kao.co.jp) Machine : Panasonic Let'sNote AL-N2 (CPU MMX Pentium 150MHz, HDD 1.6GB (800MB:FreeBSD, 800MB:win95), RAM 64MB) FreeBSD : OK (2.2.1-RELEASE) APM BIOS : OK (1.1) Cards : - 3Com Etherlink III 3C589D - adaptec SlimSCSI CE =========================================================================== Name : Kato Daisuke (katodai@taka.ee.titech.ac.jp) Machine : SOTEC Winbook SC (CPU 486SX 33MHz, HDD 240MB, RAM 8MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971206 APM BIOS : OK (1.0) Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET APM_NOSUSPEND_IMMEDIATE=3 PCIC : Cirrus Logic PD672X Cards : - MELCO LPC-T =========================================================================== Name : NABETANI Masaki (pxp14205@niftyserve.or.jp) Machine : TOSHIBA TECRA720CDT/2.1 (CPU Pentium 133MHz, HDD 2.0GB(1.0GB for FreeBSD), RAM 48MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971206 APM BIOS : OK (1.1) PCIC : Intel 82365 (or clones) Cards : - IBM SCSI PCMCIA Card =========================================================================== Name : Tatsumi Hosokawa (hosokawa@jp.FreeBSD.org) Machine : Libretto 50CT US version (CPU Pentium 75MHz, HDD 1.6GB / IBM DDLA-21620, RAM 32MB) FreeBSD : OK (2.2.5-RELEASE) Pccard Pkg: PAO-971201 APM BIOS : OK (1.1) PCIC : 82365 compatible Cards : - Megahertz XJ-10BT - Planet SmartCOM 3500 - Telecom Device SuperSocket RE450T - IBM Creditcard Ethernet II - Motorola Marine multifunction card (as modem) - NTT-IT ThunderCard AVF288 - Adaptec SlimSCSI APA-1460 - Epson Flash Packer 10MB - Integral Peripherals VIPER 340 - GREYSTONE DiskDock - I/O DATA CDP-TX6 - I/O DATA CDP-TX10 - Panasonic LK-RM120 NG-Cards : - Pioneer PCP-PW1W Misc Info : You have to keep last 34 megabytes of the drive as "unused" fdisk area to use as hybernation area. You'll see the incredible tragedy without it when you suspend the system :-). =========================================================================== Name : Koichi Koibuchi (buchi@sum.elec.keio.ac.jp) Machine : Toshiba Libretto50 CT (US) (CPU Pentium 75MHz, HDD 1.6GB, RAM 32MB) FreeBSD : OK (2.2.2-R) Pccard Pkg: PAO-970616 APM BIOS : OK (1.1) Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET SCSI_DETACH APM_NOSUSPEND_IMMEDIATE=3 PCIC : Intel 82365 (or clones) Cards : - 3Com Etherlink III 3C589C - Adaptec SlimSCSI APA-1460A - NTT DoCoMo PCMCIA DATA/FAX Adapter MarkII - TDK DF5600/J DATA/FAX Modem =========================================================================== Name : Koichi Koibuchi (buchi@sum.elec.keio.ac.jp) Machine : AKIA Tornado 513V (CPU Pentium 133MHz, HDD 1.3GB, RAM 40MB) FreeBSD : OK (2.2.2-R) Pccard Pkg: PAO-970616 APM BIOS : OK (1.1) Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET SCSI_DETACH APM_BATT_LOW_SUSPEND APM_NOSUSPEND_IMMEDIATE=3 PCIC : Cirrus Logic PD6729 Cards : - 3Com Etherlink III 3C589C - Adaptec SlimSCSI APA-1460A - NTT DoCoMo PCMCIA DATA/FAX Adapter MarkII - TDK DF5600/J DATA/FAX Modem Misc Info : zzz fails when TDK DF5600/J is plugged in. =========================================================================== Name : Hirokazu Fujioka (h-fujioka@m2.people.or.jp) Machine : NEC PC-9801NS/A (CPU i486SX 33MHz(ODP i486DX4 100MHz), HDD 500M, RAM 14336K bytes) FreeBSD : OK (FreeBSD(98)2.2.1R) Pccard Pkg: PAO-970331+PAO-970331-pc98-970721 APM BIOS : OK (APM BIOS version 1.3(NEC)) PCIC : PC-Card PC98 Original Cards : - -TDK DF1414EX DATA/FAX MODEM #For NEC PC9801NS/A # Generally available IO ports io 0x240-0x2e0 # Generally available IRQs irq 5 # Available memory slots memory 0xda000 96k # Modem Cards # TDK 14.4K modem series card "TDK" "DF1414.*" config 0x30 "sio1" any reset 1000 insert echo TDK 14.4K modem inserted remove echo TDK 14.4K modem removed - -Motorola MONTANA V.34 FAX/MODEM # MOTOROLA 28.8K modem card "Motorola" "MONTANA*" config 0x23 "sio1" any reset 1000 insert echo Motorola 28.8K modem inserted remove echo Motorola 28.8k modem removed =========================================================================== Name : Naoya Takahashi (takahasi@swift.phys.s.u-tokyo.ac.jp) Machine : Toshiba DynaBook SS475 (CPU Intel 486DX75, HDD 500MBytes, RAM 32M) FreeBSD : OK (2.2.5R) Pccard Pkg: PAO-9706016 APM BIOS : OK (1.0) PCIC : Intel 82365 Cards : - Adaptec Slim SCSI - TDK LAK-CD021 =========================================================================== Name : Hideki Sakamoto (sakamoto@hlla.is.tsukuba.ac.jp) Machine : DEC digital HiNote Ultra II (CPU P5-120, HDD 2GB, RAM 40MB) FreeBSD : OK (2.2.1-R) APM BIOS : OK (1.1) PCIC : Cirrus Logic PD672X Cards : - Adaptec SlimSCSI APA-1460J - APEX Data MultiCard (as Modem) - TDK LAK-CD021AX - PCM250AM (2.5" HDD case and PCMCIA card) # PCM250AM 2.5in HDD adapter card "PC CARD MANUFACTURER" "PCMCIA ATA/ATAPI Adapter" config 0xd "wdc1" any insert echo PCM250AM inserted remove echo PCM250AM removed Misc Info : PCM250AM don't work with irq=15. =========================================================================== Name : Hadime Watanabe (h_nabe@kt.rim.or.jp, h_nabe@mars.hby.toshiba.co.jp) Machine : Toshiba DynaBook TECRA 510CT (CPU Pentium 133MHz, HDD 2.1GB(Win95:0.8GB, FreeBSD:1.3GB), RAM 48MB(16+32)) FreeBSD : OK (2.2.2-Release) APM BIOS : OK(Maybe) (1.1) Config Opt: LAPTOP PCIC : Intel 82365 (or clones) Cards : - Toshiba Joho System PTJ-LAN/T # TJ Ethernet card (NE2000 clone?) card "TJ" "Ethernet" config default "ed0" any 0x10 insert echo TJ Ethernet card inserted insert /etc/pccard_ether $device insert /sbin/ifconfig $device inet XXX.XXX.XXX.XXX netmask 255.255.255.0 insert /sbin/route add default YYY.YYY.YYY.YYY remove echo TJ Ethernet card removed remove /sbin/ifconfig $device down remove /etc/pccard_ether_remove $device =========================================================================== Name : Regis Rampnoux (regisr@pobox.com) Machine : Texas Instruments / Extensa 560 CD (CPU Pentium 75MHz, HDD 1.2 Go, RAM 40MB) FreeBSD : OK (2.2.2) Pccard Pkg: 970616 release APM BIOS : Working (1.1) Cards : - 3C589C Etherlink III - Adaptec APA 1460A SCSI Working with HP DAT. Not working with iomega devices (ZIP/JAZ) Misc Info : XFree86 3.3.1 /etc/pccard_ether modified to add alias address. =========================================================================== Name : TOMOyuki sasaki (tsasaki@onbiz.net) Machine : Panasonic Let's Note AL-N2 T516J5 (CPU Pentium MMX 166MHz, HDD 2GB, RAM 96MB) FreeBSD : OK (2.2.2-RELEASE) APM BIOS : OK (1.1) PCIC : Intel 82365 (or clones) Cards : - NTT Personal Paldio DataFAX Card card "NTT Personal" "Paldio DataFAX Card" config 0x13 "sio3" any insert echo NTT Personal Paldio DataFax Card inserted remove echo NTT Personal Paldio DataFax Card removed - 3Com Corporation 3C589D =========================================================================== Name : George V. Neville-Neil (gnn@wrs.com) Machine : Toshiba Satellite Pro 440CDX (CPU Pentium 133, HDD 2 Gig, RAM 32 Meg) FreeBSD : Up and running (2.2.2) APM BIOS : Yes (1.1) PCIC : PC-Card Intel 82365 Cards : - 3Com Etherlink III 3C589C config 0x1 "ep0" 11 insert echo 3Com Etherlink III inserted insert /etc/pccard_ether ep0 -link0 link1 remove echo 3Com Etherlink III removed remove /sbin/ifconfig ep0 delete - Megahertz XJ4336-CC4336 card "Megahertz" "XJ4336-CC4336" config 0x23 "sio2" 10 insert echo Megahertz XJ4336 inserted remove echo Megahertz XJ4336 removed =========================================================================== Name : Kazumasa Satoh (kaz3141@aol.com) Machine : Gateway 2000 Solo 9100 JP 166LS (CPU Pentium P55CLM (MMX) 166 MHz, HDD 3 GB Enhanced IDE (IBM-DLGA-23080), RAM 64 MB SDRAM) FreeBSD : OK (FreeBSD 2.2.2-Release) Pccard Pkg: PAO-970616 APM BIOS : Gateway BIOS(updated) is OK (APM BIOS Version 1.2) PCIC : Cirrus Logic PD6832 CardBus Controller Cards : - Adaptec SlimSCSI APA-1460A/J97 KIT Rev. A - NextCom Next Hawk Ethernet Adapter # NextCom Next Hawk Etherneet Adapter card "NextCom K.K." "Next Hawk" config default "ed0" any insert echo NextCom Next Hawk Ethernet Adapter inserted insert /etc/pccard_ether $device remove echo NextCom Next Hawk Ethernet Adapter removed remove /etc/pccard_ether_remove $device Misc Info : Uncomment following options in the "PAO" configuration file options APM_BATT_LOW_SUSPEND Add following options options MFS Add following controller and devices # YAMAHA OPL3-SAx sound LSI system controller snd0 device sb0 at isa? port 0x220 irq 5 conflicts drq 1 vector sbintr device sbxvi0 at isa? drq 5 device sbmidi0 at isa? port 0x330 device opl0 at isa? port 0x388 =========================================================================== Name : Yoshinori Watanabe (nabe@s-input.co.jp) Machine : OHTEC IDATEN FNP590D (CPU Pentium 90, HDD 540M, RAM 8M) FreeBSD : OK (2.2.2-Release) APM BIOS : NG (1.1) PCIC : Cirrus Logic PD672X Cards : - BUFFALLO LPC-T =========================================================================== Name : Komori Nozomu (nozo@ke.ics.saitama-u.ac.jp) Machine : Toshiba Libretto50 (CPU Intel Pentium-75MHz, HDD 810MB, RAM 32MB) FreeBSD : OK (2.2.1-RELEASE) APM BIOS : OK (1.1) PCIC : Intel 82365 Cards : - TDK LAK-CD021BX card "TDK" "LAC-CD02x" config default "fe0" any ether 0x92 00:80:98 # for CD021, CD021A, CD021AX ether 0x96 00:80:98 # for CD021BX insert echo TDK LAC-CD021 inserted insert /etc/pccard_ether $device remove echo TDK LAC-CD021 removed remove /etc/pccard_ether_remove $device - Telecom Device SuperSocket RE450T card "Telecom Device" "SuperSocket RE450T" config default "ed0" any 0x10 insert echo NE2000 compatible card inserted insert /etc/pccard_ether $device remove echo NE2000 compatible card removed remove /etc/pccard_ether_remove $device =========================================================================== Name : Toshimitsu Miyake (miyake@nalgo.co.jp) Machine : Toshiba Libretto 60 (CPU Pentium 100MHz, HDD 1.6GB, RAM 32MB) FreeBSD : OK (2.2.2-RELEASE) APM BIOS : OK (1.1) PCIC : Intel 82365 (or cones) Cards : - 3Com 3C589C Misc Info : shutdown -r now, then boot Windows 95; hang. shutdown -r now, then boot FreeBSD; OK. =========================================================================== Name : Tomohiko Kurahashi (kura@melchior.q.t.u-tokyo.ac.jp) Machine : PC-9821Ld (CPU i486SX-33MHz, HDD 1245MB, RAM 11.6MB) FreeBSD : OK (FreeBSD(98)2.2.2-RELEASE) Pccard Pkg: PAO-970616 + PAO-970616-pc98-971023 APM BIOS : OK (1.4) PCIC : Cirrus Logic PD672X Cards : - RATOC REX-R280 card "RATOC System Inc\\." "10BASE_T CARD R280" config 0x3a "fe0" any ether 0x1fc 00:c0:d0 insert echo RATOC REX-R280 10BASE-T LAN card inserted insert /etc/pccard_ether $device remove echo RATOC REX-R280 10BASE-T LAN card removed remove /etc/pccard_ether_remove $device =========================================================================== Name : Tsuyoshi SUMIDA (sumida@capricorn10.cse.kyutech.ac.jp) Machine : Sharp Mebius MN-5400D (CPU Pentium-133MHz, HDD 1.6GB(Win95: 900M, FreeBSD: 600M), RAM 32MB) FreeBSD : OK (2.2.2-Release) Pccard Pkg: PAO-970616 APM BIOS : OK (1.1) Config Opt: LAPTOP PCIC : TI PCI-1131 CardBus Controller Cards : - TDK CD021BX (Ethernet) # TDK LAC-CD021, LAC-CD021A card "TDK" "LAC-CD02x" config default "fe0" any #ether 0x94 00:80:98 ether 0x96 00:80:98 insert echo TDK LAC-CD021 inserted insert /etc/pccard_ether $device remove echo TDK LAC-CD021 removed remove /etc/pccard_ether_remove $device - 3Com 3C589C (Ethernet) =========================================================================== Name : Ken'ichi Uenami (uenami@imasy.or.jp) Machine : Toshiba Portege 300CT 1.6 (CPU MMX-Pentium 133MHz, HDD 1.6GB, RAM 32MB) FreeBSD : OK (2.2-stable) APM BIOS : OK (1.2(recognized as 1.1)) PCIC : ToPIC(Toshiba Propietary) Cards : - D-Link DE650T =========================================================================== Name : Shuichi Oono (shu-oono@mbox.kyoto-inet.or.jp) Machine : IBM ThinkPad 535E (CPU Pentium MMX 150MHz with 256KB cache, HDD 1.6GB ( 650MB for DOS, 950MB for FreeBSD ), RAM 72MB) FreeBSD : OK (2.2.1-RELEASE PAO) APM BIOS : OK, But have a little problem (Hangup after shutdown XF86-3.2, if I suspended during X session is act.) (APM 1.1) Config Opt: no machine dependent parameters PCIC : Cirrius Logic PD6729 PC-Card Controller Cards : - RATOC REX9530 for SCSI2 - 3Com EtherLink-3 3C589D for Ethernet - TDK DF5600 (K56flex) for Modem Misc Info : I don't have a confirmation what TDK DF5600 is working with K56flex. But, dial-up ppp(iijppp with NAT patch) is working fine. =========================================================================== Name : Takehiro TOMINAGA (tominaga@kurasc.kyoto-u.ac.jp) Machine : NEC PC-9821Ne3 (Windows model) (CPU i486DX2 50MHz, HDD 340MByte (use only 100MByte for FreeBSD), RAM 7.6MByte) FreeBSD : OK (2.2.1R) Pccard Pkg: PAO-970331 APM BIOS : NG (kernel panic will happen when it enables apm bios) (1.11) PCIC : Cirrus Logic PD-672X (i don't know exactly, but pccardd says so in boot time message ;-) Cards : - Melco IFS-DS (SCSI card, OEM of RATOC REX 5536) =========================================================================== Name : Douglas Carmichael (dcarmich@mcs.com) Machine : NEC Versa 6050MH (CPU Pentium/150 MMX, HDD 1.44GB IDE, RAM Real memory=50331648 (49152K bytes), Avail memory=46522368 (45432K bytes)) FreeBSD : OK (2.2.2-RELEASE, PAO-970616) Pccard Pkg: (not using pccard-test) APM BIOS : OK (1.1) Config Opt: Sound and serial options in MISC section PCIC : TI PCI-1130 CardBus controller Misc Info : Here are the options I used for sound on my machine: controller snd0 device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr options SBC_IRQ=5 device sbxvi0 at isa? drq 5 device sbmidi0 at isa? port 0x330 device opl0 at isa? port 0x388 device pca0 at isa? port IO_TIMER1 tty And the serial options (this is for the default settings of the rev 42 BIOS): device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device sio2 at isa? port "IO_COM3" tty irq 9 vector siointr =========================================================================== Name : Gabor Kincses (gabor@acm.org) Machine : IBM Thinkpad 755 CX (CPU Pentium 75 Mhz, HDD 810 MB (Win95 465 MB, FreeBSD 345 MB), RAM 24 MB) FreeBSD : OK (2.2.2-RELEASE) Pccard Pkg: PAO-970616 APM BIOS : OK (apm0 panics when booting from DOS for 800x600) (1.1) PCIC : Intel 82365 (or clones) Misc Info : i386/isa/syscons.h (COL=100, ROW=37) =========================================================================== Name : Kiyoshi Utsui (utsui@mud.biglobe.ne.jp) Machine : Libretto50 (CPU Pentium-75, HDD 810MB, RAM 32MB) FreeBSD : OK (2.2.2-RELEASE) Pccard Pkg: PAO-970616 APM BIOS : OK (1.1) Config Opt: LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET, SCSI_DETACH, APM_BROKEN_STATCLOCK, APM_NOSUSPEND_IMMEDIATE=3 PCIC : Intel 82365 Cards : - MELCO LPC-TS - MELCO IFC-DC - TDK LAK-CD021AX - MELCO CDN-D8C =========================================================================== Name : Hideaki Okada (hokada@isl.melco.co.jp) Machine : AMiTY CN (CPU Pentium 133MHz, HDD 1166MB, RAM 32MB) FreeBSD : PCIC(PAO) driver recognizes TI1131 CardBus controller as VLSI 82C146, so only slot0(bottom one) can be used. IRQs other than 11 cannot be routed from PC Card, so you need to select IRQ 11 for PC Card in the early stage of the installation process and modify pccard.conf to use IRQ 11 only after pccard support is enabled. 2.2.2R(PAO-970616) seems not be able to read CIS, he says name of found card is (null)(null). (2.2.1R) Pccard Pkg: PAO-970331 APM BIOS : OK (1.1) PCIC : TI 1131 CardBus Controller Cards : - 3Com EtherLink III 3C589B - TDK DF2814 - EPSON FLASH PACKER 85MB - INTEGRAL VIPER 170 =========================================================================== Name : Kikuti hideo (kikuchi_hi@akw05.khi.co.jp or pxc00264@niftyserve.or.jp) Machine : NEC PC9801 NL/R 120A (CPU 486SX(J)16MHz, HDD IBM DTLA21620 1.6GB, RAM 11.6MB) FreeBSD : OK (FreeBSD(98)2.2.1R-RELEASE) Pccard Pkg: PAO-970331-pc98-970721 APM BIOS : OK (apm: found APM BIOS version 1.2) PCIC : PC-Card PC98 Original Cards : - TDK DF2814BX IRQ 5 6 memory 0xda000 96k NG-Cards : RATOK REX9836A =========================================================================== Name : Takayuki Hatano (tk-hatano@ntis.nec.co.jp) Machine : ibm ThinkPad 560 (CPU p5 120MHz, HDD 810MB, RAM 24MB) FreeBSD : OK (2.2.1) APM BIOS : OK (1.1) PCIC : Cirrus Logic PD6729 Cards : - D-LINK DE-650 ethernet card Misc Info : NG-CARD infomation 1. SCSI-CARD MIDORI ELECTRONICS CN-SC43 probe ncv ncv0:no ioaddr is given Return IRQ=5 driver not allocation failed for MIDORI ELECTRONICS.* (Device not configured) used CD-ROM CARAVELLE CD-880 2. modem-CARD Megahertz XJ4336J many time not probed such a message as No card in database for ""("") But sometime probed such a message as sio2: type 16550A Card "Megahertz"("XJ4336J") matched "Megahertz"("XJ*") and I can used ppp command /etc/pccard.conf card "Megahertz" "XJ" config 0x23 "sio2" any insert echo Megahertz PCMCIA Modem insert remove echo Megahertz PCMCIA Modem remove =========================================================================== Name : NAKAIWA Toshihiro (nakaiwa@sainet.or.jp) Machine : IBM ThinkPad 535 (KF8) (CPU Pentium 120Mhz, HDD 2.1GB, RAM 40MB) FreeBSD : OK (2.2.2R) Pccard Pkg: PAO-970616 APM BIOS : OK (1.1) Config Opt: LAPTOP,TP535 PCIC : Cirrus Logic PD6729 Cards : - NTT-TE tokyo MN128 TACard PC2 - TDK LAK-CD021AX - adaptec SlimSCSI APA-1460J - NextCom Net Dolphin NCM1428JA =========================================================================== Name : Hiroki Suguri (suguri@comtec.co.jp) Machine : Panasonic Let's note AL-N2T515J5 (CPU MMX Pentium (P55CLM) 150MHz, HDD 1.6GB, RAM 96MB) FreeBSD : OK (2.2.2-RELEASE) Pccard Pkg: PAO-970616 APM BIOS : OK (1.1) Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET SCSI_DETACH "APM_BATT_LOW_SUSPEND" "APM_NOSUSPEND_IMMEDIATE=3" "MAXMEM=(96*1024)" PCIC : Ricoh RL5C476 (PCI) Cards : - TDK DF3314E - Panasonic TO-CAF336 - 3Com Etherlink III 3C589D - Adaptec SlimSCSI APA-1460 NG-Cards : - KME KXLC003 Misc Info : KME KXLC003 (Untested card inserted. please e-mail the result to hosokawa@jp.FreeBSD.org) pccardd[36]: Card "KME "("KXLC003") matched "KME" ("KXLC003") pccardd[36]: driver allocation failed for KME (Device not configured) pccardc and pccardd PAO-970616/usr.sbin/pccard/{pccardc,pccardd} not installed by PAO boot.flp. /stand/{pccardc,pccardd} were linked to /usr/sbin instead. Is it intentional? See /stand/PAO/bin/bininstall.sh =========================================================================== Name : Kazunori Ueno (jagarl@creator.club.or.jp) Machine : PC-9821 Ls150 S14/D2 (CPU Pentium MMX 150MHz, HDD 1.4Gbytes (FreeBSD : 100Mbytes), RAM 32Mbytes) FreeBSD : OK (2.2.1R) Pccard Pkg: PAO-970331[1] + PAO-970331-pc98-970512[2] APM BIOS : OK (1.12) PCIC : Cirrus Logic PD672X Cards : - D-Link DE-660 Ethernet Card # D-Link DE-660 Ethernet Card card "D-Link" "DE-660" config default "ed0" any 0x10 insert echo D-link DE-660 inserted insert /etc/pccard_ether $device remove echo D-link DE-660 removed remove /etc/pccard_ether_remove $device =========================================================================== Name : Shoichi Kitagawa (sk@kiu.ac.jp) Machine : Latitude XPi P133ST (English keyboard) (CPU Pentium-133MHz, HDD 1.2GB(7MB:FAT,494MB:Lunux,630MB:FreeBSD,27MB:Swap for Linux & FreeBSD), RAM 40MB) FreeBSD : OK (2.2-970422-RELENG) Pccard Pkg: 970331 APM BIOS : OK except zzz (1.1) Config Opt: KBD_MAXRETRY=5 KBD_MAXWAIT=8 KBD_RESETDELAY=500 PCIC : Vadem 468 Cards : - IO-DATA PCFCA-10M - 3Com 3C589B - 3Com 3C589C - Logitec LPM-LN20T card "Logitec" "LPM-LN20T" config default "ed0" any insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device - Megahertz XJ3288J - Megahertz XJ2144 - TDK DF2814B/M - Adaptec APA-1460J - TAXAN ICD-400PN - IO-DATA PCINS-128 (ISDN) - BUG Linkboy D64K =========================================================================== Name : KANETA Shin'ichi (kaneta@rsirc.cr.chiba-u.ac.jp) Machine : ThinkPad 535 (2606-MF9) (CPU Pentium (133MHz), HDD 1033MB (Windows95 200MB, FreeBSD residual), RAM 40(8+32)MB) FreeBSD : OK (2.2.2) Pccard Pkg: PAO-970616 APM BIOS : OK (1.1) Config Opt: LAPTOP APM_IDLE_CPU APM_PCCARD_RESUME PCIC_RESUME_RESET APM_BATT_LOW_SUSPEND APM_NOSUSPEND_IMMEDIATE=3 PCIC : Cirrus Logic PD6729/6730 Cards : - Allied Telesis,K.K Ethernet LAN Card CentreCOM LA-PCM io 0x200-0x230 irq 10 11 card "Allied Telesis,K\\.K" "Ethernet LAN Card" config 0x1 "ed0" any 0x10 ether 0xff0 00:00:f4 insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device Misc Info : zzz(8) fails "Entire system suspend failure: errcode = 96". But the kernel includes fdc driver works out well. =========================================================================== Name : kazuhisa nakajima (nakasun@fatk.yamatake.co.jp) Machine : PC-9821 Ls150 Aile (CPU Intel MMX Pentium 150MHz, HDD 1.4GB(W95:840MB,DOS:50MB,FreeBSD:500MB), RAM 32MB) FreeBSD : OK (FreeBSD(98)2.2.1-RELEASE) Pccard Pkg: peo98enc.flp APM BIOS : OK (1.12) PCIC : Cirrus Logic PD672X Cards : - Melco LPC-T =========================================================================== Name : Ichiro Sako (sako@law.kyushu-u.ac.jp) Machine : PC9821La10 (CPU Pentium-100MHz, HDD 810M, RAM 16MB) FreeBSD : OK (FreeBSD(98)2.2.1R-Alpha) Pccard Pkg: PAO-970331 + PAO-970331-pc98-970721 APM BIOS : OK (1.11) Config Opt: PC98 PCIC : Cirrus Logic PD672X Cards : - Melco LPC-TS - TDK DF3314ES =========================================================================== Name : Fujioka Hirokazu (87519296@people.or.jp) Machine : NEC PC9801NS/A (CPU DX4-100MHz, HDD 540MB, RAM 9.6MB) FreeBSD : OK (FreeBSD(98)2.2.1 ALPHA) Pccard Pkg: PAO-970331+PAO-970331-pc98-970721 APM BIOS : OK (1.3) PCIC : PC-Card PC98 Original Cards : - TDK DF1414EX(sio) io 0x240-0x2e0 irq 5 memory 0xda000 96k # TDK 14.4K modem series card "TDK" "DF1414.*" config 0x30 "sio1" any reset 1000 insert echo TDK 14.4K modem inserted remove echo TDK 14.4K modem removed =========================================================================== Name : Takuro Tokuyama (tokuyama@nsc.mci.mei.co.jp) Machine : Toshiba Libretto 30 (CPU Am5x86 100MHz, HDD 500MB, RAM 20MB) FreeBSD : OK (2.2.2R) Pccard Pkg: PAO-970616 APM BIOS : OK (1.1) Cards : - NTT-TE TOKYO MN128 TA CARD PC1 (ISDN) =========================================================================== Name : Hiroyuki Ohtsuki (ohtsuki@mic.atr.co.jp) Machine : Toshiba Libretto 50CT (CPU Pentium (74.98-MHz 586-class CPU), HDD 810MB (300MB for FreeBSD), RAM 32MB) FreeBSD : OK (2.2.1-RELEASE) Pccard Pkg: PAO-970331 APM BIOS : OK (1.1) Config Opt: APM_PCCARD_RESUME PCIC_RESUME_RESET WAVELAN_PCMCIA_24 PCIC : PC-Card Intel 82365 (or clones) Cards : - AT&T WaveLAN/PCMCIA - MATSHITA KME CD-ROM02 1.13 - GATEWAY2000("XJ1144") Misc Info : I used "setconf.exe" and "instconf.exe" on DOS to initialize WaveLAN card. wlp0 cannot be automatically started. ifconfig wlp0 up dhcpc wlp0 are needed manually. =========================================================================== Name : SASAKI Takesi (takesi@is.titech.ac.jp) Machine : Fujitsu FMV5100NC-S (CPU Pentium, HDD 777MB, RAM 48MB) FreeBSD : OK (2.2.2R) Pccard Pkg: PAO-970331 APM BIOS : OK (1.1) Cards : - ELAN Ethenet card =========================================================================== Name : Takeshi Shibagaki (ie9t-sbgk@asahi-net.or.jp) Machine : Sharp Mebius MN-7350 (CPU Intel Pentium 150MHz, HDD 2067MB, RAM 64MB) FreeBSD : NG(BootAsia PAO for 2.2.1),reboot in PCMCIA initialize. OK(Walnut Creek 2.2.1 boot.flp in English) (FreeBSD2.2.1-RELEASE(kernel 2.2.2)) Pccard Pkg: PAO-97616+[bsd-nomads:04710]patch+etc APM BIOS : OK (1.1) Config Opt: LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET, SCSI_DETACH PCIC_PCI_ISA_CONFLICT, PCIC_MAX_SLOTS=2, PCIC_NOCLRREGS APM_NOSUSPEND_IMMEDIATE=3, PCIC_IRQ=7, COM_MULTIPORT, APM_BROKEN_STATCLOCK PCIC : Cirrus Logic PD6832 Cards : - NTT Personal Paldio Data Card DC-1S # NTT Personal 32kbps Data Card DC-1S card "NTT Personal" "Paldio Data Card" config 0x23 "sio2" pio insert echo NTT Personal 32kbps Data Card DC-1S inserted remove echo NTT Personal 32kbps Data Card DC-1S removed - Megahertz XJ3288A-J (33.6kbps upgrade) # Megahertz XJ3288A-J (33.6 upgraded) card "Megahertz" "XJ3288-81" config 0x23 "sio2" any insert echo Megahertz modem inserted remove echo Megahertz modem removed =========================================================================== Name : Hasegawa, Tomoki (VYA04605@niftyserve.or.jp) Machine : Toshiba DynaBookSS433 (CPU i486SX 33MHz, HDD 2.1GB(MK2103MAV), RAM 20MB) FreeBSD : OK (2.2.2-RELEASE) Pccard Pkg: PAO-970616 APM BIOS : OK (1.0) PCIC : Intel 82365SL(or compatible) Cards : - NOTEWORTHY NW288CR - TAXAN ICD-400PN (KME KXLC002) - NTT Personal Paldio Data Card DC-1P - DATAFAB PCMMD2 =========================================================================== Name : Atsushi Yanoma (CZL02453@niftyserve.or.jp) Machine : IBM Think Pad 535 MF-9 (CPU Intel Pentium 133MHz, HDD 1.0GB, RAM 40MB) FreeBSD : OK (2.2.1-RELEASE) Pccard Pkg: PAO-970331 APM BIOS : OK (1.1) Config Opt: TP535 PCIC : Cirrus Logic PD9629 Cards : - Media Intelligent SCSI-2 PC Card MSC-200 card "EPSON" "SCSI-2 PC Card SC200" config 0x12 "ncv0" any insert echo EPSON SCSI-2 PC Card MSC200 inserted remove echo EPSON SCSI-2 PC Card MSC200 removed =========================================================================== Name : Masaki KONUMA (konuma@de.mtex.co.jp) Machine : NEC PC-9821Ld/350A (CPU Intel i486SX 33MHz, HDD 335MB, RAM 35.6MB) FreeBSD : OK (FreeBSD-2.2.1-RELEASE + FreeBSD(98)-2.2.1-RELEASE) Pccard Pkg: PAO-970331 + PAO-970331-pc98-970505 APM BIOS : NG (1.4) PCIC : Cirrus Logic PD672X Cards : - 3Com Etherlink III 3C589C io 0x0d0-0x100 irq 10 =========================================================================== Name : Peter Dufault (dufault@hda.com) Machine : IBM Thinkpad 365X (CPU Pentium 120Mhz, HDD 755MB (IBM 810MB), RAM 8MB (+16MB added)) FreeBSD : FreeBSD installed OK (2.2.1 from April '97 WC CDROM) Pccard Pkg: Version on 2.2.1 WC CDROM APM BIOS : OK (1.1) PCIC : Intel 82365 Cards : - 3COM 3c589D Misc Info : 3c589D needs "-link0 link1" in ifconfig in addition to setup with floppy. The 365X keyboard works with syscons without enabling XT scancodes. =========================================================================== Name : Chiharu Shibata (chi@rd.njk.co.jp) Machine : ThinkPad 560-EJA (CPU Pentium-120MHz, HDD 810MB(Win95: 400M, FreeBSD: 410M), RAM 24MB) FreeBSD : OK (2.2.1-Release) Pccard Pkg: 970425 APM BIOS : OK (1.25) Config Opt: LAPTOP PCIC : Cirrus Logic PD6729 Cards : - Melco LPC-TS - Megahertz XJ3288-JP - SONY CD-ROM Discman PRD-650 =========================================================================== Name : Tomohiko Kurahashi (kura@melchior.q.t.u-tokyo.ac.jp) Machine : PC-9821La10 (CPU Intel Pentium 100MHz, HDD 1620MB, RAM 40MB) FreeBSD : OK (FreeBSD(98)2.2.1-RELEASE) Pccard Pkg: PAO-970331 + PAO-970331-pc98-970512 APM BIOS : OK (1.11) PCIC : Cirrus Logic PD672X Cards : - 3Com Etherlink III 3C589C - RATOC REX-9835Z - RATOC REX-9836A - RATOC REX-9530 =========================================================================== Name : Terry R. Friedrichsen (terry@venus.sunquest.com) Machine : Fujitsu Milan FPC05002A (CPU Pentium (120 MHz), HDD 1.2 GB, RAM 16 MB) FreeBSD : The only real problem is that the FreeBSD kernel will not talk to the video display properly (Chips & Technologies CT65548). I used a serial console to get the PAO kernel built and running. The video was still scrambled until I enabled "device vt0" and "options PCVT_FREEBSD" in the kernel config. (FreeBSD 2.2.1-RELEASE) APM BIOS : OK except zzz (apm -z) gives "Invalid argument" (APM BIOS version 1.1) Config Opt: LAPTOP PCIC : Cirrus Logic PD6729 rev 254 (5 mem and 2 I/O windows) Cards : - 3Com 3C589C # 3Com Etherlink III 3C589, 3C589B, 3C589C, 3C589D card "3Com Corporation" "3C589" config default "ep0" 10 insert echo 3Com Etherlink III inserted insert /etc/pccard_ether $device insert /sbin/ifconfig $device inet "inet-address" netmask 255.255.255.0 broadcast "broadcast address" insert /sbin/route add default "default-gateway" remove echo 3Com Etherlink III removed remove /sbin/ifconfig $device down remove /etc/pccard_ether_remove $device - Adaptec SlimSCSI # Adaptec SlimSCSI card "Adaptec, Inc\\." "APA-1460.*" config default "aic0" 11 insert echo Adaptec Slim SCSI inserted remove echo Adaptec Slim SCSI removed Misc Info : When installing X, configuring the Glidepoint touch pad as a Glidepoint failed; configuring as a PS/2-style mouse worked. Working modeline: Modeline "800x600@8bpp" 35.87 800 840 968 1056 600 601 605 618 =========================================================================== Name : Jun YAMASHITA (junkun@esys.tsukuba.ac.jp) Machine : TOSHIBA DynaBook Portage 620CT (CPU Intel Pentium Processor 100Mhz, HDD default 1.3GB,but I use 700MB for FreeBSD,and rests are for Windows95, RAM default 8MB + extensional 16MB) FreeBSD : OK (FreeBSD-2.2.1R) Pccard Pkg: PAO-970331 APM BIOS : OK (1.1) PCIC : Intel 82365 (or clones) Cards : - SII (Data Comminication Card MC-6500) - I-O DATA(PCLA) =========================================================================== Name : Hosobuchi Noriyuki (hoso@buchi.tama.or.jp) Machine : PC-98001NS/A (CPU i486DX2 50MHz, HDD 120MB, RAM 17.6MB) FreeBSD : OK (FreeBSD(98) 2.2.1R-RELEASE) Pccard Pkg: PAO-970331 + PAO-970331-pc98-970512 APM BIOS : OK (1.3) PCIC : PC98-Original Cards : - Contec C-NET(PC)C - Melco LPC-T - PLANET ENW3500 - 3Com 3C589C NG-Cards : - IO-DATA PCFM-144 - Megahertz XJ2144-71 =========================================================================== Name : Keiji Kawamura (kawamura@srd.mic.mei.co.jp) Machine : Panasonic Let's Note Mini AL-N0D413J5 (CPU Am5x86 133MHz, HDD 810Mbyte, RAM 24Mbyte) FreeBSD : OK (2.1.6-Release) Pccard Pkg: PAO-960831 APM BIOS : OK (1.1) PCIC : Ricoh RF5C396 Cards : - 3Com Etherlink III PCMCIA 3C589D =========================================================================== Name : Yutaka Kudoh (ykudoh@nite.go.jp) Machine : Fujitsu FMV-5100NL/Y (CPU Pentium 100MHz, HDD 2.1GB, RAM 32MB) FreeBSD : OK (2.2.2-RELEASE) Pccard Pkg: PAO-970604 APM BIOS : OK (1.1) Config Opt: PCIC_IRQ=15 PCIC : Cirrus Logic PD-6729 Cards : - Panasonic CF-VEL211P-B - Adaptec SlimSCSI APA-1460 =========================================================================== Name : Keisuke TAKAYAMA (taka@magic.omiya.saitama.jp) Machine : Sotec WinBookBird 100 (S3P100) (CPU Pentium 100MHz, HDD 810MB, RAM 32MB) FreeBSD : OK (2.2.1-RELEASE) Pccard Pkg: PAO-970331 APM BIOS : NG? (1.1) PCIC : PC-Card Intel 82365 (or clones) (5 mem & 2 I/O windows) Cards : - Megahertz X-Jack Ethernet Misc Info : Default Configuration is good for everything. =========================================================================== Name : Masaki KONUMA (konuma@de.mtex.co.jp) Machine : PC-9821Na12/H10 (CPU Intel Pentium 120MHz (Id=0x52b Stepping=11 Features=0x1bf), HDD 1GB, RAM 23.6MB) FreeBSD : OK (FreeBSD-2.2.1-RELEASE + FreeBSD(98)-2.2.1-RELEASE) Pccard Pkg: PAO-970331 + PAO-970331-pc98-970505 APM BIOS : OK (1.11) PCIC : Cirrus Logic PD672X Cards : - Melco LPC-T irq 3 5 6 10 card "PCMCIA" "UE2212" config default "ed0" 5 0x10 ether 0xff0 00:00:e8 insert echo UE2212 inserted insert /etc/pccard_ether $device remove echo UE2212 card removed remove /etc/pccard_ether_remove $device =========================================================================== Name : Yoshinari Hayato (taichiro@towntv.co.jp) Machine : FUJITSU FMV-5133 NP/W (CPU Pentium 133MHz, HDD 1.3GB, RAM 48MB) FreeBSD : OK (2.2.2-RELEASE) APM BIOS : OK (1.1) PCIC : TI PCI-1130 CardBus Controller rev 4 Cards : - ACCTON EN-2216 Misc Info : In the previous(quite old?) report, there was a comment that we can't use slot 1. But now both slots are available. =========================================================================== Name : Masamichi HOSODA (trueroad@es.it-chiba.ac.jp) Machine : PC-9801NS/A (CPU Cx486DX2 66MHz (I/O DATA PK-NSA66/C), HDD 500MB, RAM 9.6MB) FreeBSD : OK (FreeBSD(98) 2.2.1R-RELEASE) Pccard Pkg: PAO-970331, PAO-970331-pc98-970505 PCIC : PC98 Original Cards : - Melco LPC-TS - I/O DATA PCSC-II =========================================================================== Name : Noriyuki KOIZUMI (GBC01623@niftyserve.or.jp) Machine : Toshiba Libretto30 (CPU AMD Am5x86 100MHz, HDD 477MB, RAM 20MB) FreeBSD : OK (2.2-STABLE) Pccard Pkg: PAO-970331 APM BIOS : OK (1.1) Config Opt: LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET, SCSI_DETACH, APM_BROKEN_STATCLOCK, APM_NOSUSPEND_IMMEDIATE=3 PCIC : Intel 82365 (or clones?) Cards : - Adaptec SlimSCSI (APA-1460J) - 3Com 3C589C - Megahertz X-Jack Ethernet CC10BT/2 - Megahertz XJ3288J-PU - NTT Personal Paldio Data Card DC-1P - EPSON Flash Packer 5MB NG-Cards : - =========================================================================== Name : Kouichi ABE (kouichi@etn.yz.yamagata-u.ac.jp) Machine : ThinkPad530CS 1FD (CPU Intel 486DX2/50MHz, HDD 1.3GB (including DOS/Win3.1 120MB), RAM 20(8+12)MB) FreeBSD : OK (2.2.1-RELEASE) Pccard Pkg: PAO-970331 APM BIOS : OK (1.1) Config Opt: LAPTOP PCIC : Intel 82365 (or clones) Cards : - 3Com Etherlink III PCMCIA 3C589C-TP =========================================================================== Name : Tomoyuki SUZUKA (suzuka-t@igo.cs.uec.ac.jp) Machine : SOTEC WinBook Quattro/V 150X (CPU Intel Pentium 150MHz, HDD 1.35GB, RAM 48M) FreeBSD : OK (2.1.7.1-RELEASE) Pccard Pkg: PAO-960831 APM BIOS : OK (1.1) Config Opt: WINBOOKPRO APM_PCCARD_RESUME APM_BROKEN_STATCLOCK PCIC_RESUME_RESET PSM_NO_REPEAT LAPTOP PCIC : Intel 82365 compatible Cards : - 3Com Etherlink III 3C589B =========================================================================== Name : Jacques Garrigue (garrigue@kurims.kyoto-u.ac.jp) Machine : Panasonic Lets's Note AL-N1T515J5 (CPU Pentium 150Mhz, HDD 1.35G (FreeBSD 700M), RAM 48Mbytes) FreeBSD : OK (2.2-970422-RELENG) Pccard Pkg: PAO-970331 for 2.2.1 APM BIOS : \011OK (\0111.1) Config Opt: APM_BROKEN_STATCLOCK (did not try without) PCIC : \011Intel 82365 (or clone) Cards : - TDK LAK-CD021 (Ethernet fe0) NG-Cards : - TAXAN PCS010 (SCSI-2) (with TAXAN ICD-800PW) Misc Info : Install failed with all versions of 2.2.1 (hang at boot). 2.1.7 was OK, but there is a bug in fe0 (using TDK LAC-CD021). Finally I installed 2.2-970422-RELENG. GENERIC works, but not PAO. But adding PAO options in GENERIC worked, so everything is now fine with a custom configuration. =========================================================================== Name : Koshin Sumitani (BXD04075@niftyserve.or.jp) Machine : HP OmniBook 5500 CT (CPU Pentium 133MHz, HDD 2GB, RAM 48MB) FreeBSD : OK (2.2.1-RELEASE) Pccard Pkg: PAO-970331 APM BIOS : OK (1.1) Config Opt: LAPTOP PCIC_IRQ=9 PCIC : Cirrus Logic PD6729 Cards : - Adaptec SlimSCSI APA-1460A - 3COM Etherlink III 3C589C - EPSON FlashPacker 20MB - Logitec DATA/FAX MODEM CARD LPM-FM336 =========================================================================== Name : Cengiz Alaettinoglu Machine : Micron Millennia Transport (CPU Pentium 133, HDD 2G, RAM 48K) FreeBSD : OK (2.2.1) APM BIOS : OK PCIC : Cirrus Logic Cards : - 3com Etherlink III 3c589D Misc Info : XFree86 that comes w/ FBSD 2.2.1 has broken device drivers for Cirrus Logic GD7548. I installed a newer beta version from www.Xfree86.org =========================================================================== Name : Yuichi Yoda Machine : IBM ThinkPad 535 (2606-KF8) (CPU Pentium 120MHz, HDD IBM DTNA-22160 (2.1GB), RAM 40MB) FreeBSD : OK, No problem (2.2.1-RELEASE) Pccard Pkg: PAO-970331 (installed from bootpao-970425.flp) APM BIOS : OK (probe says "apm: found APM BIOS version 1.1") Config Opt: LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET, APM_BROKEN_STATCLOCK PCIC : Cirrus Logic PD6729 Cards : - Adaptec SlimSCSI APA-1460 - TDK DF2814B (Data/Fax Modem /Upgraded to 33600bps) Misc Info : nothing specail =========================================================================== Name : Takeshi UEno (tueno@vio.co.jp) Machine : TOSHIBA Libretto 30 (CPU CPU Am5x86 100MHz, HDD 500MB, RAM 20MB) FreeBSD : OK (2.2.1-RELEASE) Pccard Pkg: PAO boot Floppy for 2.2-RELEASE APM BIOS : OK (1.1) PCIC : Intel 82365 (5 mem & 2 I/O windows) Cards : - APA-1460 Host SCSI Adapter - Allied Telesis Ethernet LAN Adapter - Panasonic TO-CAF288 - NTT DoCoMo PCMCIA DATA/FAX ADAPTER 9600 Mark2 - NTT Personal Paldio Data Card NG-Cards : - NIKON Digital Camera COOLPIX 100 =========================================================================== Name : Nick Sayer (nsayer@quack.kfu.com) Machine : HP Omnibook 5000CTS (CPU Intel Pentium 90Mhz, HDD 1.2MB, RAM 32M) FreeBSD : OK (FreeBSD 2.2.1-RELEASE) Pccard Pkg: PAO-970331 APM BIOS : OK (1.1) Config Opt: APM_PCCARD_RESUME PCIC : CL PD6729 Cards : - 3C589B - TDK 28.8 (forgot exact model) NG-Cards : - NE4100 - MEGAHERTZ XJ2144 Misc Info : 1. The 50% card success rate is disturbing. The same cards fail under win95, so I am inclined to blame it on hardware. 2. I have gotten the sound to work (it is a CS4232), but it's an ugly hack. =========================================================================== Name : Minoru Horita (horita@osa.dec-j.co.jp) Machine : Toshiba Portege 620CT (CPU Pentium 100MHz, HDD 1.3GB, RAM 40MB) FreeBSD : OK (2.2.1-RELEASE) Pccard Pkg: PAO-970331 APM BIOS : OK (1.1) PCIC : Intel 82365 Cards : - RATOC REX5588 NG-Cards : - MEGASOFT STARFAX CARD288 =========================================================================== Name : Kei TANAKA (kei@pal.xerox.com) Machine : IBM ThinkPad 760ED (CPU Intel Pentium 133MHz, HDD 2.1G, RAM 40M) FreeBSD : OK (2.2.1-RELEASE) Pccard Pkg: PAO-970331 APM BIOS : OK (1.1) Config Opt: LAPTOP,APM_PCCARD_RESUME,PCIC_RESUME_RESET PCIC : TI PCI-1130 CardBus Controller Cards : - 3Com EtherLink III PCMCIA 3C589C - AT&T WaveLAN/PCMCIA config default "wlp0" any ether wavelan insert echo WaveLAN PCMCIA inserted insert /etc/pccard_ether $device remove echo WaveLAN PCMCIA removed remove /etc/pccard_ether_remove $device Misc Info : PAO-ready boot floppy failed to initialize PC Card driver. With ordinary boot flopy 3C589C can be used as zp0, so I installed FreeBSD using zp0 then installed PAO. But, without following patch PC Card controller was not initialized. zzz(8) fails when pccard is plugged in. *** sys.pao/pccard/pcic.c Fri Mar 28 09:49:11 1997 --- sys/pccard/pcic.c Wed Mar 26 10:57:22 1997 *************** *** 121,128 **** static void pcic_pci_attach(pcici_t config_id, int unit) { ! pcic_pci_ioaddr ! = pci_conf_read(config_id, PCI_MAP_REG_START) & ~PCI_MAP_IO; pci_conf_write(config_id, 0x04, 0x00ff00ff); } #endif /* NPCI > 0 */ --- 121,130 ---- static void pcic_pci_attach(pcici_t config_id, int unit) { ! if (pcic_pci_id != PCI_DEVICE_ID_PCIC_TI1130_CARDBUS) { ! pcic_pci_ioaddr = ! pci_conf_read(config_id, PCI_MAP_REG_START) & ~PCI_MAP_IO; ! } pci_conf_write(config_id, 0x04, 0x00ff00ff); } #endif /* NPCI > 0 */ =========================================================================== Name : Gregg Kasten (gregg@cs.stanford.edu) Machine : Toshiba Satellite Pro 400CDT (CPU Pentium 75, HDD 700M, RAM 48M) FreeBSD : Needed to take the "5,11" (non-default) choice for IRQ at PCCard config screen during installation. Also needed to change this in /etc/pccard.conf. (2.2.1-PAO) Pccard Pkg: 970331 APM BIOS : OK (??) PCIC : Intel-compatible (? whatever came with the computer) Cards : - 3COM Etherlink III (3c589b) # 3Com Etherlink III 3C589, 3C589B, 3C589C, 3C589D card "3Com Corporation" "3C589" config default "ep0" any insert echo 3Com Etherlink III inserted insert /etc/pccard_ether $device remove echo 3Com Etherlink III removed remove /etc/pccard_ether_remove $device # A few days after installation, I switched to the following card: # Linksys Combo PCMCIA Ethernet Card card "LINKSYS" "E-CARD" config default "ed0" any 0x10 insert echo PCMCIA ETHERNET V1.0 inserted insert /etc/pccard_ether $device remove echo PCMCIA ETHERNET V1.0 removed remove /etc/pccard_ether_remove $device Misc Info : I installed FreeBSD over the internet (ftp passive to ftp.freebsd.org) using my 3Com 3c589b PCCard. Using the PCCard default IRQ options ("10,11", if I recall correctly, but I could be wrong), the machine hung after downloading about 100k of the first distribution set. I tried this a few times, and it once got up to around 300k before hanging. In order to get the 3Com card working, I needed to take the "5,11" (non-default) choice for IRQ at PCCard config screen during installation. With this change, the install when flawlessly (and it was FAST!). I also needed to change this in /etc/pccard.conf. A couple days later I replaced the 3Com card with a LinkSys Combo EthernetCard (PCCard). I didn't change the IRQs, so it's still running nicely with the "5,11" IRQ setting in /etc/pccard.conf. =========================================================================== Name : Gregg Kasten (gregg@cs.stanford.edu) Machine : Toshiba Tecra 720CDT (CPU Pentium 133, HDD 2GB, RAM 48M) FreeBSD : OK (2.2.1-PAO) Pccard Pkg: 970331 APM BIOS : OK (??) PCIC : Intel-compatible (? whatever came with the computer) Cards : - 3COM Etherlink III (3c589b) card "3Com Corporation" "3C589" config default "ep0" any insert echo 3Com Etherlink III inserted insert /etc/pccard_ether $device remove echo 3Com Etherlink III removed remove /etc/pccard_ether_remove $device =========================================================================== Name : Kenichi Niioka (Kenichi.Niioka@unisys.co.jp) Machine : Nihon Unisys AQUANTA LN (CPU Pentium 133MHz, HDD IDE 800MB TOSHIBA MK1926FCV, RAM 32MB) FreeBSD : OK (2.2.1-RELEASE) Pccard Pkg: PAO-970331 Config Opt: options LAPTOP options "PCIC_MAX_SLOTS=2" options "PCIC_IRQ=11" #device psm0 at isa? disable port "IO_KBD" conflicts tty irq 12 vector psmintr #device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr PCIC : O2Micro PCI to PCMCIA Bridge (Intel 82365 (or clones)) Cards : - Nihon Unisys JPF0300-ETH Ethernet card #Nihon Unisys card "Nihon Unisys, Ltd." "JPF0400-ETH" configdefault "ed0" 10 ether 0xff0 00:80:45 insert echo Nihon Unisys Ethernet inserted insert /etc/pccard_ether $device remove echo Nihon Unisys Ethernet removed remove /etc/pccard_ether_remove $device =========================================================================== Name : Satoru SAITO (saitos@mail.gunmanet.or.jp) Machine : AKIA tornado 515XP (CPU Pentium/155MHz, HDD 1.3GB, RAM 48MB) FreeBSD : OK (2.1.5R) Pccard Pkg: PAO-960831 APM BIOS : OK (1.1) Config Opt: LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET, SCSI_DETACH PCIC : Intel 82365 NG-Cards : SlimSCSI APA-1460J =========================================================================== Name : Kawaguchi Hiromichi (guzi@imasy.or.jp) Machine : TOSHIBA DynaBook SS-R 590 (CPU Intel Pentium 90Mhz, HDD 1,295MB, RAM 40M) FreeBSD : OK (FreeBSD 2.1.5-RELEASE) Pccard Pkg: PAO-960831 APM BIOS : OK (1.0) PCIC : Intel 82365 Cards : - FUJITSU TOWA LA501 card "FUJITSU TOWA" "LA501" config 0x29 "fe1" 11 0x10 ether 0x332 00:00:0e insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device - TDK DF3314 DATA-FAX MODEM - TDK LAC-CD02x - NTT DoCoMo PCMCIA DATA/FAX ADAPTER 9600 Mark2 - PCMCIA MBH10302 =========================================================================== Name : Jun Obama (george@yk.rim.or.jp) Machine : IBM ThinkPad 530CS 1FD (CPU intel 486DX2 50MHz, HDD 1.4G, RAM 20M) FreeBSD : OK (2.1.5R) Pccard Pkg: PAO-960831 APM BIOS : OK (1.1) Config Opt: LAPTOP, TP530 PCIC : i82365 Cards : - REX-5588A # Ratoc REX-5588A card "PCMCIA LAN MBH10304 ES" " 01" config 0x38 "fe0" any ether 0x200 00:c0:d0 insert echo RATOC REX-5588A Ethernet inserted insert /etc/pccard_ether $device remove echo RATOC REX-5588A Ethernet removed remove /etc/pccard_ether_remove $device - Megahertz X-Jack XJ-4336J FAX/Modem - Adaptec SlimSCSI APA-1460J =========================================================================== Name : NISHIZUKA Koki (KHE01441@niftyserve.or.jp) Machine : IBM ThinkPad 701C (2630-7TW) (CPU Intel DX4 75MHz, HDD 2GB(TOSHIBA MK2103MAV)(DOS 400MB, FreeBSD 1.6GB), RAM 40MB) FreeBSD : OK (2.2-RELEASE (Mar.16,1997)) Pccard Pkg: PAO-970317 APM BIOS : OK (1.1) Config Opt: LAPTOP PCIC : Cirrus Logic PD672X Cards : - 3Com Etherlink III PCMCIA 3C589C - Lanned Ethernet Card ELECOM LD-CDWA (MACNICA ME1-JEIDA) - Megahertz XJ10BT - Adaptec SlimSCSI APA-1460 - MACNICA MIRACLE SCSI-II mPS110 - IBM SCSI PCMCIA Card - No Brand 20MB flash ATA card - Epson America Inc. EHDD340 - Maxtor MobileMAX MXL171 - INTEGRAL PERIPHERALS Viper 260 (8260PA) - INTEGRAL PERIPHERALS Viper 340 (8340PA) - GREYSTONE PERIPHERALS DiskDock(PCMCIA to IDE Interface) - Simple Technology SimpleJack Modem 28.8 Communicatator - IBM Push Pop Modem - IBM Double Jack Modem - IBM Smart Capture Card II =========================================================================== Name : Teus Hagen (teus@oce.nl) Machine : VXIII Nan Tan Computers(?), alike SAGE/MINT/... (CPU Pentium 100 Mhz, HDD IDE 1.3 GB Toshiba, RAM 32MB) FreeBSD : OK (2.2-GAMMA) Pccard Pkg: PAO-970210 APM BIOS : NG (1.1) PCIC : Vadem VG-469 Cards : - Megahertz XJ2288 - Grey Cell GCS2220 NG-Cards : - Adaptec APA-1460 =========================================================================== Name : Toru Miyazaki (t-miyazk@jaist.ac.jp) Machine : Panasonic AL-N1T513-J5(Let's Note) (CPU Pentium 133MHz, HDD 1GB, RAM 32MB) FreeBSD : OK (2.1.7-RELEASE) Pccard Pkg: PAO-960831 Config Opt: LAPTOP APM_PCCAED_RESUME PCIC_RESUME_RESET APM_BROKEN_STATCLOCK PSM_NO_RESET PCIC : Intel 82365 (5 mem & 2 I/O windows) Cards : - 3Com Etherlink III 3C589C - TDK DF3314EX =========================================================================== Name : HIGAKI, Masakazu (higaki@umi.hq.kishou.go.jp) Machine : TOSHIBA DynaBook SS475 (CPU DX4 75MHz, HDD 500MB (FreeBSD 300MB, DOS/Win 200MB), RAM 24MB) FreeBSD : OK (2.2-RELEASE) Pccard Pkg: PAO-970317 APM BIOS : OK (1.0 compatible mode) Config Opt: LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET, APM_NOSUSPEND_IMMIDIATE=3, APM_BROKEN_STATCLOCK PCIC : Intel 82365 Cards : - 3Com EtherLink III 3C589B =========================================================================== Name : Satoshi TAKANO (takano@star.t.u-tokyo.ac.jp) Machine : Digital Hinote Ultra II CTS5120 (CPU Pentium 120MHz, HDD 1.08GB, RAM 24MB) FreeBSD : OK (2.2-970215-GAMMA) Pccard Pkg: PAO-970210 APM BIOS : OK (1.1) PCIC : Cirrus Logic PD6722 Cards : - Megahertz X-Jack Ethernet CC10BT/2 - RATOC REX-5535X(SCSI) - Software Japan Tsu-Na-Gu Modem V34 =========================================================================== Name : Ken-ichi Suzuki (suzuki@archi.is.tohoku.ac.jp) Machine : Libretto 30 (CPU 486DX4 (100MHz), HDD 500MB, RAM 16MB) FreeBSD : OK (2.1.7-RELEASE) Pccard Pkg: PAO-960831 APM BIOS : OK (1.1) Config Opt: PSM_NO_RESET, USERCONFIG, VISUAL_USERCONFIG Cards : - Relia PCMCIA Ethernet Adapter # Relia PCMCIA LAN card "PCMCIA LAN" "Ethernet" config default "ed0" any insert echo Relia PCMCIA LAN inserted insert /etc/pccard_ether $device remove echo Relia PCMCIA LAN removed remove /etc/pccard_ether_remove $device Misc Info : zzz(8) will freeze the system if the card is inserted. =========================================================================== Name : Tomohiro Adachi (adachi@mxc.meshnet.or.jp) Machine : COMPAQ CONTURA AERO 4/33C (CPU SL Enhanced 486SX 33MHz, HDD 1GB, RAM 12MB) FreeBSD : OK (2.1.5R) Pccard Pkg: 960831 APM BIOS : NG (1.1) Config Opt: LAPTOP, CONTURA, SIO_IRQ_BUG Cards : - TDK LAK-CD021AX card "TDK" "LAC-CD02x" config default "fe0" any ether 0x92 00:80:98 insert echo TDK LAC-CD021 inserted insert /etc/pccard_ether $device remove echo TDK LAC-CD021 removed insert /etc/pccard_ether_remove $device - Megahertz XJ3288A-J (33.6 upgraded) card "Megahertz" "XJ3288-81" config 0x23 "sio2" any insert echo Megahertz modem inserted remove echo Megahertz modem removed - Intel 14.4 FAXModem card "Intel" "International FaxModem 14.4/14.4" config 0x22 "sio2" any insert echo Megahertz modem inserted remove echo Megahertz modem removed =========================================================================== Name : KUNISHIMA Takeo (kunishi@is.aist-nara.ac.jp) Machine : Toshiba Libretto 50 (CPU Pentium 75MHz, HDD 810MB, RAM 16MB) FreeBSD : OK (2.1.7-RELEASE) Pccard Pkg: PAO-960831 APM BIOS : OK (1.1) Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET PCIC : Intel 82365 (5 mem & 2 I/O windows) Cards : - D-Link Ethernet Card DE-650 (Ver 01.00, according to "pccardc dumpcis" information) card "D-Link" "DE-650" config default "ed0" any 0x10 # ether 0x40 00:80:c8 insert echo D-link DE-650 inserted insert /etc/pccard_ether $device remove echo D-link DE-650 removed remove /etc/pccard_ether_remove $device Misc Info : For keeping scratch area for hybernation, I once created an MSDOS extended partition using FDISK on DOS, then removed it from FreeBSD installer and created a new FreeBSD partiotion whose size is as same as the removed one. First I tried network installation using PAO-ready boot floppy. However, the items for ethernet could not be found in the network interface configuration menu on FreeBSD installer, though D-Link DE-650 was recognized as ed0 ethernet card. So I installed from DOS partition. After the installation, I changed the entry of DE-650 in the default pccard.conf as above, and the card works successfully. zzz(8) fails when DE-650 is plugged in. =========================================================================== Name : Castor Fu (castor@alumni.caltech.edu) Machine : DEC Hinote Ultra CT450 (CPU Intel i486DX2/50, HDD 340MB, RAM 24MB) FreeBSD : OK (2.1.5-RELEASE) Pccard Pkg: PAO-960831 APM BIOS : OK (1.1) Config Opt: LAPTOP PCIC : Cirrus Logic PD6710 Cards : - 3Com Etherlink III PCMCIA 3C589C - Adaptec SlimSCSI APA-1460 Misc Info : SCSI adapter sees devices on bus, but attempts to access Sony CDU-76S result in timeouts from the aic driver, and attempts to write to a Iomega ZIP drive have been unsuccessful, resulting in the system hanging. =========================================================================== Name : SASABE, Tetsuro (tss@a.u-tokyo.ac.jp) Machine : FM V Biblo NC/S (FMV-5100 NC/S) (CPU Pentium 100MHz, HDD 810MB (450MB for FreeBSD), RAM 32MB (16MB on board, 16MB added)) FreeBSD : OK (2.2-970215-GAMMA) Pccard Pkg: PAO-970210 APM BIOS : OK (1.1) Config Opt: LAPTOP PCIC : Intel 82365 (or clones) Cards : - 3Com Etherlink III (3C589C) - Adaptec SlimSCSI (APA-1460J) =========================================================================== Name : Teppei OKAWA (teppei@intlab.soka.ac.jp) Machine : TOSHIBA Libretto 50 (CPU Pentium 75MHz, HDD 810M, RAM 16M) FreeBSD : OK (2.2-GAMMA) Pccard Pkg: PAO-970210 APM BIOS : OK Config Opt: LAPTOP APM_PCCARD_RESUME APM_RESUME_RESET PCIC : Intel 82365 (or clones) Cards : - I-O DATA PCLA/T Ethernet Card card "I-O DATA" "PCLA" config default "ed0" any 0x10 insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device =========================================================================== Name : Ken'ichirou Kimura (te194058@cse.ec.kyushu-u.ac.jp) Machine : Toshiba Portege 620CT (CPU Pentium 100MHz, HDD 1.2GB, RAM 16MB) FreeBSD : ok (2.2-gamma) Pccard Pkg: PAO-970205 APM BIOS : ok (1.1) PCIC : Intel 82365 Cards : - Genius ME3000 II card "PCMCIA" "PCMCIA-ETHERNET-CARD" config 0x20 "ed0" 11 0x10 ether 0x1c0 00:00:e8 insert echo ME3000II Ethernet inserted insert /etc/pccard_ether $device remove echo UE2216 Ethernet removed remove /etc/pccard_ether_remove $device =========================================================================== Name : ABE Masayuki (mabe@da2.so-net.or.jp) Machine : Liberty (GATEWAY2000) (CPU Inter 486DX4(100MHz), HDD 1.3GB, RAM 24MB) FreeBSD : OK (2.2-BETA) Pccard Pkg: PAO-970210 APM BIOS : OK (1.0) PCIC : Cirrus Logic PD672X Cards : - TDK DF2814 - 3com 3c589B - Integral Peripherals VIPER 340 - PLANET Smart Com 3500 NG-Cards : - IBM Smart Capture Card II =========================================================================== Name : ABE Masayuki (mabe@da2.so-net.or.jp) Machine : desktop(SOYO486ASW(Sis 85c496)) + PC card drive(EPSON DYO-0211) (CPU AMD 5x86-P75(133MHz), HDD 1GB + 2GB + 0.5GB, RAM 32MB) FreeBSD : OK (2.2-BETA) Pccard Pkg: PAO-970210 APM BIOS : OK (1.1) PCIC : Vadem VG-465 Cards : - TDK DF2814 - 3com 3c589B - Integral Peripherals VIPER 340 NG-Cards : - PLANET Smart Com 3500 - IBM Smart Capture Card II =========================================================================== Name : Yukihiro Shioda (shioda@venus.dtinet.or.jp) Machine : IBM TP535-MF9 (CPU Pentium 133MHz, HDD 1.08GB, RAM 40MB) FreeBSD : OK (2.2-961014-SNAP) Pccard Pkg: PAO-961020 APM BIOS : OK (APM-1.1) Config Opt: TP535 PCIC : Cirrus Logic PD9629 Cards : - Panasonic TO-CAF288 - NTT DoCoMo DATA/FAX CARD 9600 MarkII - 3Com Etherlink III 3C589c - Accton Ethernet Card - BusLogic SlimSCSI APA-1460J(OEM) =========================================================================== Name : Dirk-Willem van Gulik (Dirk.vanGulik@jrc.it) Machine : ThinkPad 701Cs (CPU 486DX4 (100MHz), HDD 860 Mb, RAM 24MB) FreeBSD : OK (2.2-BETA) Pccard Pkg: PAO-9612?? APM BIOS : OK (1.1) Config Opt: LAPTOP,TP701 Cards : - Linksys Combo PCMCIA Ethernet Card # Linksys Combo PCMCIA Ethernet Card # Instant Ethernet Series card "LINKSYS" "E-CARD" config default "ed0" any 0x10 insert echo PCMCIA ETHERNET V1.0 inserted insert /etc/pccard_ether $device remove echo PCMCIA ETHERNET V1.0 removed remove /etc/pccard_ether_remove $device Misc Info : Works out of the box with NE2000/ed0 driver. Is marketed under quite a few simmilar names. The box indicates clearly it is a NE2000 clone; but I saw at CompUSA at least four different branded boxes with the same card. =========================================================================== Name : Dirk-Willem van Gulik (Dirk.vanGulik@jrc.it) Machine : Toshiba Satelite 110 CS (CPU 586-815 (100MHz), HDD 760 Mb, RAM 8 Mb) FreeBSD : OK (2.1.5-Release) Pccard Pkg: PAO for 2.1.5. release APM BIOS : OK (1.1) Config Opt: LAPTOP Cards : - Linksys Combo PCMCIA Ethernet Card # Linksys Combo PCMCIA Ethernet Card # Instant Ethernet Series card "LINKSYS" "E-CARD" config default "ed0" any 0x10 insert echo PCMCIA ETHERNET V1.0 inserted insert /etc/pccard_ether $device remove echo PCMCIA ETHERNET V1.0 removed remove /etc/pccard_ether_remove $device Misc Info : Had suspend problems; Needed to have an sc->gone=1 added to the ed0 suspend routine to avoid hanging in the interupt loops (this seemed to be fixed on the 2.2 version) =========================================================================== Name : Takehito SASAKI (take@archi.is.tohoku.ac.jp) Machine : ThinkPad 530Cs (CPU 486DX4 (100MHz), HDD 720MB (450MB for BSD), RAM 20(4+16)MB) FreeBSD : OK (2.2-BETA_A) Pccard Pkg: PAO-970131 APM BIOS : OK (1.1) Config Opt: LAPTOP,TP530 Cards : - Megahertz X-Jack Ether # Megahertz X-Jack Ethernet CC10BT/2 card "Megahertz" "CC10BT/2" config default "sn0" any ether megahertz 00:00:86 insert echo X-Jack Ethernet inserted insert /etc/pccard_ether $device remove echo X-Jack Ethernet removed remove /etc/pccard_ether_remove $device - RATOC REX-5536AM # Ratoc REX5536 card "PCMCIA SCSI MBH10404" "01" config 0x3a "stg0" any 0 insert echo REX5536 SCSI-2 card inserted remove echo REX5536 SCSI-2 card removed Misc Info : stg driver has some suspending problems. =========================================================================== Name : Narimatsu Hiroshi (nari@mxb.meshnet.or.jp) Machine : IBM ThinkPad 535 2606-MF9 (CPU Pentium 133, HDD 1.03GB, RAM 40MB) FreeBSD : OK (2.1.5) APM BIOS : NG (unknown) Config Opt: TP535 PCIC : CirrusLogic PD672X Cards : - TDK-CD021AX - adaptec SlimSCSI APA-1460J - BUG Linkboy D128 # BUG Linkboy D128 # Mr. Kurosawa's configuration card "B.U.G.,Inc." "Linkboy D128" config 0x22 "sio2" any reset 1000 insert echo BUG Linkboy D128-TA inserted remove echo BUG Linkboy D128-TA removed =========================================================================== Name : KOYAMA, Tetsuji (koyama@artstech.co.jp) Machine : IBM ThinkPad 560 (2640-5JA) (CPU Pentium 100MHz, HDD 810MB (Win95: 250MB, FreeBSD 560MB), RAM 40MB) FreeBSD : OK (2.2-BETA) Pccard Pkg: PAO-970129 APM BIOS : OK (1.12) Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET PCIC : Cirrus Logic PD6729 Cards : - 3Com EtherLink III 3C589C Misc Info : zzz(8) command always failure, including without PCMCIA card. It's displayed 'Entire system suspend failure: errcode = 96'. =========================================================================== Name : Takida Keiji (takida@ecs.toyama-u.ac.jp) Machine : NEC PC9821La10/S8 (CPU Pentium 100MHz, HDD 775M (650MB Windows95, 125MB FreeBSD), RAM 40MB (8MB+32MB)) FreeBSD : OK (3.0-970118-SNAP + FreeBSD2.2-BETA-961014 + PAO.970114) APM BIOS : NG Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET PCIC_PCI_ISA_CONFLICT "PCIC_MAX_SLOTS=2" Cards : - Melco LPC-T io 0x00d0-0x0100 irq 3 5 6 10 memory 0xd4000 96k card "PCMCIA" "UE2212" config default "ed0" 5 0x10 ether 0xff0 00:00:e8 insert echo UE2212 inserted insert /etc/pccard_ether $device remove echo UE2212 card removed remove /etc/pccard_ether_remove $device - Adaptec SlimSCSI1460J card "Adaptec, Inc\\." "APA-1460.*" config default "aic0" 10 insert echo Adaptec Slim SCSI inserted remove echo Adaptec Slim SCSI removed NG-Cards : NEC PC-9801N-J15(FAX/MODEM card) =========================================================================== Name : WATANABE tomoo (tomo@jp.FreeBSD.org) Machine : TOSHIBA DynaBook SS475 (CPU i486DX4 75MHz, HDD 500MB (all for FreeBSD), RAM 8MB -> 32MB) FreeBSD : OK (2.2-960801-SNAP) Pccard Pkg: PAO-961002 APM BIOS : OK (1.0) Config Opt: LAPTOP PCIC : Intel 82365 Cards : - Melco LPC-T - Lanned Ethernet Card ELECOM LD-CDWA =========================================================================== Name : Itagaki Kichiya (itagaki@el.gunma-u.ac.jp) Machine : TOSHIBA DynaBook Sattelite Pro 420 (CPU Pentium 100MHz, HDD 810MB, RAM 8MB) FreeBSD : OK (2.1.5-RELEASE) Pccard Pkg: PAO-960831 APM BIOS : OK (1.1) Config Opt: LAPTOP Cards : - Melco LPC-TS =========================================================================== Name : K.[NAO-NAO].Kawai (kawai@cks.canon.co.jp) Machine : FMV5133NP/W (CPU Pentium 133MHz, HDD 1.3GB, RAM 16MB) FreeBSD : OK (2.1.5-RELEASE) Pccard Pkg: PAO-960831.tar.gz APM BIOS : OK (1.1) PCIC : PCI-1130 Cards : - 3COM EtehlinkIII 3C589C Misc Info : card slot 0 only =========================================================================== Name : Umino, Shinya (umi@mpd.necs.nec.co.jp) Machine : IBM ThinkPad 220 (CPU i386 16MHz, HDD 520MB, RAM 10MB) FreeBSD : OK (2.2-BETA) APM BIOS : OK Config Opt: LAPTOP PCIC : Intel 82365 Cards : - D-Link DE-650 Ethernet Card - NEC AtermIC20 - SMART ST1414L FAX & VOICE # Cirrus logic (Smart Modular Technologies ST1414 FAX & VOICE) card "CIRRUS LOGIC" "FAX MODEM" config 0x22 "sio2" any insert echo Cirrus Logic Modem inserted remove echo Cirrus Logic Modem removed =========================================================================== Name : Tomoyuki Miki (t_miki@os.rim.or.jp) Machine : Toshiba DynaBook Tecra500CT/1.3 (CPU Pentium 120MHz, HDD E-IDE 1.3GB (Win95: 400MB WinNT4.0: 400MB FreeBSD: 500MB), RAM 32MB) FreeBSD : OK (2.2-BETA) Pccard Pkg: PAO-970104 APM BIOS : OK (1.1) Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET APM_BATT_LOW_SUSPEND PCIC_IRQ=9 ATAPI_STATIC APM_IDLE_CPU PCIC : Intel 82365 Cards : - 3Com EtherLink III 3C589C - Adaptec SlimSCSI APA-1460J - I/O DATA PCIDE Card NG-Cards : - Megahertz XJ3288J-P =========================================================================== Name : NAKATA Ken (ken@net5.co.jp) Machine : Toshiba America Information Systems T3400CT (CPU originally 486SX 33MHz when FreeBSD was installed; later replaced by Am5x86 133MHz, HDD 518MB (Quantum Europa540A), RAM 12MHz) FreeBSD : OK (2.1.5R) Pccard Pkg: forgot :-( sorry (at least it's not the latest version) APM BIOS : OK (1.0) Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET PCIC : Intel 82365 (5 mem & 2 I/O windows) Cards : - Adaptec SlimSCSI APA1640J - AIWA PV-JF288 NG-Cards : - ICM PSC-2401 Misc Info : Needs to enable resume with TSETUP utility that comes with the PC in order for suspend & resume to work. Fails to suspend, panics and reboots when tried to suspend with SlimSCSI inserted. PV-JF288 works fine with suspend & resume. ICM PSC-2401 seems to be probed correctly, but fails to initialize the driver with the following messages: /kernel: Card inserted, slot 0 pccardd[32]: code Manufacturer ID ignored pccardd[32]: code No link ignored pccardd[32]: Card "PCMCIA SCSI MBH10404" ("01") matched "PCMCIA SCSI MBH1040" ("01") pccardd[32]: Using mem addr 0x0, size 0, card addr 0xff00 pccardd[32]: Using I/O addr 0x340, size 16 pccardd[32]: Setting config reg at offs 0x3f0 to 0x7a pccardd[32]: Reset time = 100 ms pccardd[32]: Assigning I/O window 0, start 0x340, size 0x10 flags 0x5 /kernel: probe spc /kernel: spc0: init failed, driver disabled /kernel: Return IRQ=10 /kernel: stray irq 10 /kernel: too many stray irq 10's; not logging any more pccardd[32]: Assign spc0, io 0x340, mem 0x0, 16384 bytes, irq 10, flags 0 pccardd[32]: driver allocation failed for PCMCIA SCSI MBH1040 =========================================================================== Name : Shigeru WASHINO (washino@manta.iis.u-tokyo.ac.jp) Machine : EPSON PCV-N450S (CPU Intel 486DX2 50MHz, HDD 340MB, RAM Base 4MB + Extra 8MB = Total 12MB) FreeBSD : OK (by 'BootAsia-PAO/boot.flp') (2.1.5R) Pccard Pkg: I'm not sure,but maybe PAO-960828 because 'BootAsia-PAO/boot.flp' released Aug,28,1996. APM BIOS : OK (1.0) Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET APM_BROKEN_STATCLOCK PCIC : Vadem 486 (5 mem & 2 I/O Windows) Cards : - Contec C-NET(PC)C-10 Misc Info : Hung up at suspending with the PC-card in.With the card off,zzz make system hung.Suspending by hot-key,if BIOS is set to 'Save to RAM',Suspend & Resume work well.If BIOS 'Save to Disk',system date would not proceed after resume. =========================================================================== Name : Kazuhiro Takahashi (kazuhiro@tsi.co.jp) Machine : Digital Hinote Ultra II CTS5150 (CPU Pentium 150MHz, HDD 1.3GB, RAM 40MB) FreeBSD : OK (2.1.5-Release) Pccard Pkg: PAO-960831 APM BIOS : OK (1.1) Config Opt: LAPTOP PCIC : CLPD-6722 Cards : - MERCO PCMCIA LAN CARD LPC-T(1) - Panasonic MODEM SCSI Card CF-JMS101 card "Panasonic" "FAX/Modem" config default "sio2" any insert echo Panasonic FAX/Modem inserted remove echo Panasonic FAX/Modem removed Misc Info : LPC-T(1) works as "ACCTON EN2212". Version info tuple of my card is follow: Tuple #4, code = 0x15 (Version 1 info), length = 30 000: 04 01 41 43 43 54 4f 4e 00 45 4e 32 32 31 32 00 010: 45 54 48 45 52 4e 45 54 00 52 30 34 00 ff Version = 4.1, Manuf = [ACCTON],card vers = [EN2212] Addit. info = [ETHERNET],[R04] I may use CF-JMS101 as MODEM only. =========================================================================== Name : Takayuki Matsui (matsui@post.co.jp) Machine : Panasonic Let's Note AL-N1T513-J5 (CPU Pentium 133MHz, HDD 1GB, RAM 16MB) FreeBSD : OK (2.2-961014-SNAP) Pccard Pkg: PAO-961020 APM BIOS : OK (1.1) Config Opt: LAPTOP PSM_NO_RESET PCIC_RESUME_RESET APM_PCCARD_RESUME PCIC : Intel 82365 (5 mem & 2 I/O windows) Cards : - Panasonic CF-VEL211P-B - RATOC REX-5588 # Ratoc REX-5588 (now testing...) card "PCMCIA LAN MBH10304 ES" " 01" config 0x3a "fe0" any ether 0x200 00:c0:d0 insert echo RATOC REX-5588 Ethernet inserted insert /etc/pccard_ether $device remove echo RATOC REX-5588 Ethernet removed remove /etc/pccard_ether_remove $device =========================================================================== Name : Yukinobu Moriya (ymoriya@kt.rim.or.jp) Machine : Digital HiNote Ultra II LTS5133 (CPU Pentium 133MHz, HDD 1.3GB, RAM 16MB) FreeBSD : OK (2.2-ALPHA) Pccard Pkg: PAO-961115 APM BIOS : OK (1.1) Config Opt: LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET, PCIC_MAX_SLOTS=2 PCIC : Cirrus Logic PD672X Cards : - TDK DF3314BZ DATA/FAX Modem card "TDK" "DF3314.*" config 0x33 "sio2" any reset 1000 insert echo TDK 33.6K modem inserted remove echo TDK 33.6K modem removed - MEGASOFT STARFAX CARD 288 card "MEGASOFT Inc\\." "SFI-*" config 0x33 "sio2" any reset 1000 insert echo MEGASOFT 28.8K modem inserted remove echo MEGASOFT 28.8K modem removed =========================================================================== Name : Masaaki Kimbara (kimbara@mpd.necs.nec.co.jp) Machine : IBM Thinkpad 560 (CPU Pentium 133MHz, HDD 1GB (Win95: 450MB, BSD: 550MB), RAM 40MB) FreeBSD : OK (2.2-ALPHA) Pccard Pkg: PAO-961202 APM BIOS : OK (1.1) Config Opt: LAPTOP APM_PCCARD_RESUME APM_RESUME_RESET PCIC_PCI_ISA_CONFLICT PCIC : Cirrus Logic PD6729 Cards : - IBM Creditcard Ethernet II - Software Japan Tsunagu-V34 Modem card - Sony CD-ROM PRD-650 diskman =========================================================================== Name : Tatsumi Hosokawa (hosokawa@jp.FreeBSD.org) Machine : Toshiba Libretto 30 (CPU Am5x86 100MHz, HDD 500MB, RAM 20MB) FreeBSD : OK (2.2-ALPHA) Pccard Pkg: PAO-961202 APM BIOS : OK (1.1) Config Opt: APM_PCCARD_RESUME PCIC_RESUME_RESET PCIC : pcic.c says Intel 82365, but it must be a compatible chip Cards : - Megahertz XJ3288-JP - Megahertz XJ10BT - Planet SmartCOM 3500 Misc Info : Last 50 magabytes of the disk is used as a scratch area for hybernation support by BIOS regardless of FDISK patrition table. I think BIOS fakes the disk geometry and hide this area from users. DO NOT FDISK FROM FREEBSD INSTALLER! It uses disk geometry gotten directly from IDE disks. It will damage your filesystem when you use hybernation. Use FDISK on DOS/Windows, and keep the FDISK partition for FreeBSD as MSDOS extended partition temporally. Remove it from FreeBSD installer and create the new FreeBSD partition whose size is same as the last one. Moreover I strongly recommend you to put the swap partition at the end of FreeBSD partition. Even if the hybernation BIOS crashes the FreeBSD partision, damage for the swap partition is not critical compared to it for the filesystem. zzz(8) fails when XJ10BT is plugged in. =========================================================================== Name : Susumu Nishimura (nisimura@kurims.kyoto-u.ac.jp) Machine : SOTEC Winbook Quattro/V 133X (CPU Pentium 133MHz, HDD 1.35GB, RAM 48MB) FreeBSD : OK (2.1.5-RELEASE) Pccard Pkg: PAO-960831 APM BIOS : OK (apm: running in APM 1.0 compatible mode) Config Opt: WINBOOKPRO PSM_NO_RESET SBC_IRQ =5 PCIC : Intel 82365 compatible Cards : - 3Com Etherlink III 3C589C - Dayna Communications CommuniCard E - Megahertz X-Jack Ethernet XJEM3288 (as modem card) # Megahertz X-Jack Ethernet XJEM3288 card "MEGAHERTZ" "CC/XJEM3288" config 0x2d "sio2" pio reset 1000 # safety reset time insert echo PCMCIA Modem inserted remove echo PCMCIA Modem removed NG-Cards : Megahertz X-Jack Ethernet XJEM3288 (as ether card) =========================================================================== Name : Tetsuya Kumada (kumada@yk.rim.or.jp) Machine : IBM ThinkPad 230Cs FBW (CPU i486DX2 50MHz, HDD 540MB, RAM 20MB) FreeBSD : OK (2.1.5-RELEASE) Pccard Pkg: PAO-960831 APM BIOS : OK (1.0) Config Opt: TP230FBW PCIC : VLSI Cards : - Adaptec SlimSCSI APA-1460 - Megahertz XJ3288J-P - ADDTRON EP-210A # EP-210 Ethernet Card card "EP-210 PCMCIA LAN CARD\\." ".*" config default "ed0" any 0x10 ether 0x110 00:40:33 insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device =========================================================================== Name : Takuya NISHIMURA (takuya@arc-s.co.jp) Machine : TOSHIBA PORTEGE 620CT (CPU Pentium/100MHz, HDD 1.26GB, RAM 40MB) FreeBSD : OK (2.2-961014-SNAP) Pccard Pkg: PAO-961020 APM BIOS : OK (1.1) PCIC : Intel 82365 Cards : - Adaptec APA-1460J - 3Com 3C589C - U.S.R. XJ10BT - U.S.R. XJ3288J-P - U.S.R. XJ1144 Misc Info : 0) SASAKI Takesi's reported trouble is happened to my machine. It's as follows: On resume, kernel repeats following messages and won't proceed. /kernel: wd0: status 50 error 0 /kernel: wd0: wdunwedge failed: I restored wd.c to original version and it goes well, too. 1) zzz deadlocks at pluging XJ10BT. =========================================================================== Name : Takayuki KAWAKAMI (kawakami@allied-telesis.co.jp) Machine : Toshiba PORTEGE 610CT (CPU Pentium 90MHz, HDD 720MB, RAM 16MB) FreeBSD : OK (2.1.5-RELEASE) Pccard Pkg: PAO-960831 APM BIOS : OK (1.1) PCIC : Intel 82365 Cards : - 3Com 3C589B - Hagiwara Sys-Com HPC-SSFDC - Megahertz XJ3288J-P FAX/Modem function serial config 0x23 "sio2" pio =========================================================================== Name : Tomohiko Kurahashi (kura@susie.gen.u-tokyo.ac.jp) Machine : NEC PC-9821 Ld (CPU Intel 486SX 33MHz, HDD 1195MB, RAM 7.6MB) FreeBSD : OK (FreeBSD(98)2.1.5-RELEASE) Pccard Pkg: PAO-960831 + pccard98-test-960414.diff.gz PCIC : PC-Card Cirrus Logic PD672X Cards : - 3Com Etherlink III 3C589C - RATOC REX-9835 NG-Cards : - RATOC REX-9822 =========================================================================== Name : Yoshishige Arai (ryo2@on.rim.or.jp) Machine : Akia Tornado 513P (CPU Pentium 133MHz, HDD 1.3GB, RAM 33MB) FreeBSD : OK (2.1.5-RELEASE) Pccard Pkg: PAO-960831 APM BIOS : OK (1.0) Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET Cards : - Megahertz X-Jack XJ4288J FAX/Modem # Megahertz XJ4288/CC4288 FAX/Data Modem card "Megahertz" "XJ-CC4288" config 0x23 "sio2" 11 insert echo Megahertz XJ-CC4288 Modem inserted remove echo Megahertz XJ-CC4288 Modem removed - 3Com Etherlink III 3C589C-TP # 3Com Etherlink III 3C589B, 3C589C card "3Com Corporation" "3C589" config default "ep0" 10 insert echo 3Com Etherlink III inserted insert /etc/pccard_ether $device remove echo 3Com Etherlink III removed remove /etc/pccard_ether_remove $device Misc Info : - Both cards works correctly to insert/remove. - Resume fails when XJ4288 is active prior to suspend, but suspend/resume goes well when its' card slot power is off. SIO_SUSP_KEEP_PWR option is ineffective. - With the kernel enabled psm0, the keyboard was locked. PSM_NO_RESET has no effect on it. Calling BIOS setup by [Fn]+ESC key can unlock. Following patch can also avoid keyboard locking. *** sys/i386/isa/psm.c.orig Tue Nov 12 21:42:28 1996 --- sys/i386/isa/psm.c Thu Nov 14 15:48:08 1996 *************** *** 258,263 **** --- 258,264 ---- while(inb(AUX_PORT+PSM_STATUS) & 0x03) { if(inb(AUX_PORT+PSM_STATUS) & 0x2 == 0x2) inb(AUX_PORT+PSM_DATA); + DELAY(3000); } return; } =========================================================================== Name : SASAKI Takesi (takesi@is.titech.ac.jp) Machine : Sotec WinbookS (CPU 80486SX/33MHz, HDD 777MB, RAM 12MHz) FreeBSD : OK (2.2-961014SNAP) Pccard Pkg: PAO-961020 APM BIOS : OK (1.0) Config Opt: "COMPAT_APM10" APM_PCCARD_RESUME PCIC_RESUME_RESET APM_BROKEN_STATCLOCK PCIC : Cirrus Logic PD672X Cards : - No-brand NE2000 compatible card - Cirrus card "CIRRUS LOGIC" "FAX MODEM" config 0x22 "sio2" 10 insert echo Newmedia 14.4 Modem inserted remove echo Newmedia 14.4 Modem removed Misc Info : 0) On resume, kernel repeats following messages and won't proceed. /kernel: wd0: status 50 error 0 /kernel: wd0: wdunwedge failed: I restored wd.c to original version and it goes well. 1) NE2000 compatible card won't work. I patched ed.c as [bsd-nomads:02895]. 2) Shutdown -x doesn't work. =========================================================================== Name : Kazuhiro Iida (iida@ask.or.jp) Machine : IBM ThinkPad 535 (2606-KJF8) (CPU Pentium 120MHz, HDD 810MB, RAM 24MB) FreeBSD : OK (2.2-SNAP-960801) Pccard Pkg: PAO-961002 APM BIOS : OK (1.1) Config Opt: LAPTOP, PCIC_PCI_ISA_CONFLICT, PCIC_MAX_SLOTS 2 PCIC : Cirrus Logic PD6729 Cards : - 3Com Etherlink III PCMCIA 3C589 - BUG Linkboy(ISDN) =========================================================================== Name : Yoshiro MIHIRA (sanpei@yy.cs.keio.ac.jp) Machine : Sotec WinBookPro 100 J3DX4/100Ci (CPU i486DX4 100MHz, HDD 1300MB, RAM 32MB) FreeBSD : OK (2.2-961014-SNAP) Pccard Pkg: PAO-961020 APM BIOS : OK (1.0) PCIC : Cirrus Logic PD672X Cards : - Planet Smart Com2000 - I/O DATA PCFM144 FAX/Modem - IBM Ethercard2 - NoVaModem 144 - Planet Smart COM 3500 - MACNICA ME1-JEIDA =========================================================================== Name : Jacques Garrigue (garrigue@kurims.kyoto-u.ac.jp) Machine : WinBookPro 100/C (CPU i486DX4, HDD 540M, RAM 32M) FreeBSD : OK (2.2-961014) Pccard Pkg: PAO-961020 APM BIOS : OK (1.0) Config Opt: LAPTOP PSM_NO_RESET APM_PCCARD_RESUME PCIC_RESUME_RESET SIO_SUSP_KEEP_PWR Cards : - I-O DATA FAX/MODEM 28800 Standard NG-Cards : TDK LAK-CD-021 Misc Info : TDK LAK-CD-021 worked with the standard configuration on 2.2-960612/PAO-960704. Also, WinBookPro had APM problems, needing modification to the sources to have the clock corrected, but this seems to be solved in the last 3.05.19 version. =========================================================================== Name : SATOU Ichirou (ichirou@fa2.so-net.or.jp) Machine : IBM ThinkPad 560 (2640-EJA) (CPU Pentium 120MHz, HDD 810MB, RAM 24MB) FreeBSD : OK (2.2-961014-SNAP,2.2-960801-SNAP) Pccard Pkg: PAO-961020,PAO-961002 APM BIOS : OK (1.1) Config Opt: LAPTOP,APM_PCCARD_RESUME,PCIC_RESUME_RESET PCIC : Cirrus Logic PD6729 Cards : - Smart ST1414L Fax&Voice Modem function serial 0x23 "sio2" pio - SunDisk SDP5-10 =========================================================================== Name : Kouichi Matsuoka (kmatsu@sci.kumamoto-u.ac.jp) Machine : compaq LTE 5280 (CPU Pentium 120MHz, HDD 800Mb, RAM 16M) FreeBSD : OK (2.1.5) Pccard Pkg: 960831 APM BIOS : OK (1.1) Cards : - Genius 2 ME3000 =========================================================================== Name : SUZUKI Ryoutaro (suzuryo@kw.phys.keio.ac.jp) Machine : IBM ThinkPad 230Cs YB7 (CPU AMD 5x86P75 133MHz, HDD 810MB, RAM 20MB) FreeBSD : OK (2.1.5-RELEASE) Pccard Pkg: PAO-960831 APM BIOS : OK Config Opt: TP230FBW Cards : - 3COM 3C589CTP - AIWA PV-JF288 =========================================================================== Name : Kayoko, Okamoto (okamoto@mach.kokusaidenki.co.jp) Machine : ThinkPad 560 (CPU Pentium-100MHz, HDD 810MB(Windows95 250MB, FreeBSD 560MB), RAM 24MB) FreeBSD : OK (2.1.5RELEASE) Pccard Pkg: 960831 APM BIOS : NG (1.06) Config Opt: LAPTOP, TP560 Cards : - 3Com Etherlink III PCMCIA 3C589C - Adaptec SlimSCSI APA-1460J - Allied Telesis Ethernet Card LA-PCM NG-Cards : - Megaherts XJ2144-81 =========================================================================== Name : Seiji Kondo (kondo@pic.melco.co.jp) Machine : Panasonic PRONOTE mini CF-11 (CPU 486DX4 75MHz, HDD 1.0GB (550MB for FreeBSD), RAM 24MB) FreeBSD : OK (2.1.5R) Pccard Pkg: PAO-960831 APM BIOS : OK (1.1) Config Opt: JETMINI Cards : - 3Com Etherlink III PCMCIA 3C589B - Omron ME2814C FAX/DATA MODEM card "OMRON" "ME2814C FAX/DATA.*" config 0x23 "sio2" 10 insert echo OMRON ME2814 Modem inserted remove echo OMRON ME2814 Modem removed - Adaptec SlimSCSI - IBM Smart Capture Card II card "IBM Corp\\." "Video Capture" config default "scc0" any cardmem 0xd4000 0x0 0x8000 insert echo Smart Capture Card inserted remove echo Smart Capture Card removed =========================================================================== Name : Masakazu Higaki (higaki@umi.hq.kishou.go.jp) Machine : TOSHIBA DynaBook SS475 (CPU i486DX4 75MHz, HDD 500MB (FreeBSD 300MB, DOS 200MB), RAM 24MB) FreeBSD : OK (2.2-960801-SNAP (2.1.5R also OK)) Pccard Pkg: PAO-960911 APM BIOS : OK (1.0) Config Opt: LAPTOP PCIC : Intel 82365 Cards : - 3Com EtherLinkIII 3C589B =========================================================================== Name : Kenneth Ingham (ingham@i-pi.com) Machine : Dell latitude XP 4100C (CPU 486DX4-100, HDD Seagate IDE 500MB, RAM 20MB) FreeBSD : OK (2.2-960801-SNAP) Pccard Pkg: PAO-960911 APM BIOS : OK Config Opt: LAPTOP APM_PCCARD_RESUME PCIC_RESUME_RESET APM_BROKEN_STATCLOCK PCIC : Vadem 486 (5 mem & 2 I/O Windows) Cards : - 3Com 3C589 twisted-pair - US Robotics Sportster 28.8kbps data/fax modem Misc Info : 3C589: trafshow and tcpdump work. USR Sportster: No changes from example in PAO-960911. I've not tested this thoroughly. =========================================================================== Name : Nozomu Matsui (nozomu@yy.cs.keio.a.jp) Machine : Mitsubishi APRICOT FX (CPU Pentium 75MHz, HDD 525MB, RAM 40MB) FreeBSD : OK (2.1.5-Release) Cards : - MEGAHERTZ NG-Cards : - 3Com Etherlink 3 3C589B =========================================================================== Name : KOIZUMI Noriyuki (GBC01623@niftyserve.or.jp) Machine : IBM ThinkPad 230Cs-YB7 (CPU Intel 486SX-33MHz, HDD 720MB, RAM 20MB) FreeBSD : OK (2.2-960801-SNAP) Pccard Pkg: PAO-961002 APM BIOS : OK (1.0) Config Opt: LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET, SCSI_DETACH, APM_BROKEN _STATCLOCK PCIC : VLSI 83C146 Cards : - 3COM Etherlink III 3C589C - EPSON Flash Packer 5MB NG-Cards : - TDK DF2814B/M =========================================================================== Name : Shunsuke Yura (yura@um.u-tokyo.ac.jp) Machine : DEC Digital Hinote Ultra CS450 (CPU i486DX2 50MHz, HDD 810MB, RAM 20MB) FreeBSD : OK (2.2-960801-SNAP) Pccard Pkg: 960911 APM BIOS : OK (1.1) Config Opt: LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET PCIC : Cirrus Logic PD6710 Cards : - 3Com 3C589B - AIWA PV-JF288 =========================================================================== Name : Nick Sayer (nsayer@quack.kfu.com) Machine : Zenith Z-NoteFlex (CPU 486DX4-75, HDD 1G, RAM 20M) FreeBSD : OK (2.2-960801-SNAP) Pccard Pkg: PAO-960911 APM BIOS : OK (1.0) Config Opt: PSM_NO_RESET PCIC_RESUME_RESET APM_PCCARD_RESUME PCIC : Cirrus Logic Cards : - 3C589 - Megahertz XJ2288 - NE4100 Misc Info : PCIC_RESUME_RESET still needs a small patch. Audio needs 2 small patches, which have been submitted to GNATS. Suspend fails when floppy drive used prior to suspend. See http://www.kfu.com/~nsayer/zenith/ for details =========================================================================== Name : Sasaki Takeshi (sasaki@cs.titech.ac.jp) Machine : EPSON Direct Endeavor NT-500 (CPU 486SX 33MHz, HDD 260MB, RAM 8MB) FreeBSD : OK (2.1.5-RELEASE) Pccard Pkg: PAO-960831 APM BIOS : NG (detect and status read only) (1.0) PCIC : Vadem 468 Cards : - Eiger Labs EPX-ET10T2 Combo =========================================================================== Name : Yuusuke Hiwasaki (yusuke@splab.hil.ntt.jp) Machine : SOTEC WinBookBird 133G/S (CPU Pentium 133MHz, HDD 1.35GB, RAM 32MB) FreeBSD : OK (2.1.5-RELEASE) Pccard Pkg: PAO-960828, PAO-960831 APM BIOS : OK (1.1) Config Opt: (None) PCIC : Intel 82365 (4 mem & 2 I/O windows) Cards : - Allied Telesis LA-PCM-T Ethernet - TDK DF2814C Fax/Modem =========================================================================== Name : Kimura Shigenobu (skimu@cms.phys.s.u-tokyo.ac.jp) Machine : Digital HiNote Ultra II CTS5133 (CPU Pentium 133MHz, HDD 1.3Gbytes, RAM 40MBytes) FreeBSD : OK (2.2-960801-SNAP) Pccard Pkg: PAO-960911 APM BIOS : OK Cards : - 3Com Etherlink III PCMCIA 3C589C Misc Info : Time loses 10 minues a day under BIOS version 2.1.3. Updating BIOS to 2.10 solves this probrem. Latest version of BIOS image can be found, for example, http://pc.dec-j.co.jp/support/lib/bios/bios.htm =========================================================================== Name : Manabu Nakamura (pcs39833@asciinet.or.jp) Machine : PC/AT compatible (with RATOC REX-5051F) (CPU AMD 5k86-90, HDD 1.2GB, RAM 96MB) FreeBSD : OK (FreeBSD 2.1.5-RELEASE) Pccard Pkg: 960831 Config Opt: LAPTOP,PCIC_IRQ=12 PCIC : Intel 82365 Cards : - Megaherz XJ2288 Misc Info : REX-5051F is PC-Card Adapter for desktop PC. =========================================================================== Name : Norihide Hattori (hattori@alice.asahi-u.ac.jp) Machine : Panasonic AL-N1 (Let's Note) (CPU Pentium 120MHz, HDD 810MB, RAM 32MB) FreeBSD : OK (2.1.5) Pccard Pkg: 960831 APM BIOS : OK (1.1) Config Opt: LAPTOP, APM_PCCARD_RESUME, PCIC_RESUME_RESET Cards : - MELCO LPC-TS =========================================================================== Name : Hiroshi Takeuchi (takeuchi@junjun.iijnet.or.jp) Machine : TOSHIBA Portege 610CT (CPU Pentium 90MHz, HDD 720MB, RAM 40MB) FreeBSD : OK (2.2-SNAP-960801) Pccard Pkg: PAO-960911 APM BIOS : OK (1.0) Config Opt: LAPTOP,APM_PCCARD_RESUME,PCIC_RESUME_RESET PCIC : Intel 82365 Cards : - Adaptec SlimSCSI APA-1460J - Accton EN2212 Ethernet - Megahertz XJ3288 FAX/Modem card "Megahertz" "XJ3288-81" config 0x23 "sio1" any insert echo Megahertz XJ3288-J Modem inserted remove echo Megahertz XJ3288-J Modem removed - IBM SmartCaptureCard II =========================================================================== Name : John R LoVerso (loverso@osf.org) Machine : TI TravelMate 5200 (CPU Pentium 120MHz, HDD 1.2GB, RAM 32MB) FreeBSD : OK (2.1.5-RELEASE) Pccard Pkg: PAO-960831 APM BIOS : OK (1.1) Config Opt: none PCIC : PC-Card Cirrus Logic PD672X (5 mem & 2 I/O windows) Cards : - 3Com Etherlink III 3C589C Misc Info : I have a 3com Etherlink III 3C562 (combo enet + modem) that I can't get recognized at all. =========================================================================== Name : Yuichi Yoda Machine : IBM ThinkPad 535 (CPU Pentium 120MHz, HDD 770MB, RAM 40MB) FreeBSD : OK (2.1.0 Release) Pccard Pkg: pccard-test-960414 + 960418 APM BIOS : NG (?unknown) Config Opt: TP530 Cards : - Adaptec SlimSCSI APA-1460 =========================================================================== Name : Keisuke Inoue (keisuke@aa.cs.keio.ac.jp) Machine : SOTEC WinBook SC (CPU CPU i486SX 33MHz, HDD 540MB, RAM 8MB) FreeBSD : OK (2.1.5-RELEASE) Pccard Pkg: PAO-960812 APM BIOS : NG Config Opt: LAPTOP, WINBOOKPRO, options "PCIC_IRQ=12" PCIC : CLPD-672X Cards : - 3Com EtherLink III PCMCIA 3C589C - SUNTAC MS288CF =========================================================================== Name : Kazuhisa Yuki (yuki@st.med.kyoto-u.ac.jp) Machine : ThinkPad230cs YB-7 (CPU 486SX 33Mhz, HDD 800MB, RAM 12MB) FreeBSD : OK (2.2-960801-SNAP) Pccard Pkg: PAO-960911 APM BIOS : FORCE_APM10 (1.0) Config Opt: TP230 PCIC : VLSI Cards : - REX-5535XM - 3Com EtherlinkIII 3c589c-TP NG-Cards : - INTEGRAN XJ-2144j =========================================================================== Name : Minoru Oikawa (mino@bb.imagica.co.jp) Machine : Toshiba Libretto-20 (CPU AMD Am486DX4/75MHz, HDD 258MB (TOSHIBA MK0200MAT), RAM 20MB (8+12)) FreeBSD : OK (2.1.5R (w/ bootasia-PAO-960903)) Pccard Pkg: PAO-960831 APM BIOS : OK (1.0) PCIC : Intel 82365 Cards : - 3Com 3c589C Misc Info : Last 46368 blocks unused for hibernation. This value is same as Win95 installed. Network install tips, NIC change timing... ``boot: '' show, you type ``-c'', ``config> '' show, you change NIC and type ``quit''. That all :-) =========================================================================== Name : Minoru Oikawa (mino@bb.imagica.co.jp) Machine : IBM ThinkPad 701C (CPU Intel i486DX4/75MHz, HDD 1378MB (IBM-DMCA-21440), RAM 24MB (8+24)) FreeBSD : OK (2.1.5R (w/ bootasia-PAO-960903)) Pccard Pkg: PAO-960831 APM BIOS : OK (1.1) PCIC : Cirrus Logic PD672X Cards : - 3Com 3c589C =========================================================================== Name : EGUCHI Osamu (eguchi@shizuokanet.or.jp) Machine : ThinkPad 535 TYPE:2606-KF8 (CPU Pentium 120MHz, HDD 775MB, RAM 40MB) FreeBSD : OK (2.1.5-RELEASE) Pccard Pkg: PAO-960831 APM BIOS : NG (1.1) Config Opt: LAPTOP, "TP535" PCIC : Cirrus Logic PD6729 Cards : - 3Com Etherlink III 3C589B [UTP] =========================================================================== Name : Motoyuki Konno (mkonno@res.yamanashi-med.ac.jp) Machine : IBM ThinkPad 530CS (CPU 486DX4 100MHz, HDD 512MB (200MB for FreeBSD), RAM 20MB) FreeBSD : OK (2.1.5R) Pccard Pkg: PAO-960831 APM BIOS : OK (1.1) Config Opt: TP530 PCIC : Unknown Cards : - 3Com Etherlink III PCMCIA 3C589C Misc Info : System suspend by "zzz" sometimes failed (errcode = 96). =========================================================================== Name : Keisuke Inoue (keisuke@aa.cs.keio.ac.jp) Machine : Digital HiNote Ultra II CTS5100 (CPU Pentium 100MHz, HDD 1.08GB, RAM 40MB) FreeBSD : OK (2.1.5-RELEASE) Pccard Pkg: PAO-960812 APM BIOS : OK (1.1) Config Opt: LAPTOP PCIC : CLPD-6722 Cards : - 3Com EtherLink III PCMCIA 3C589C - SUNTAC MS288CF =========================================================================== Name : Shinji NAKAI (nakai@design.t.u-tokyo.ac.jp) Machine : IBM ThinkPad 701C (CPU i486DX4, HDD 720MB, RAM 24MB) FreeBSD : OK (2.1.5-Release) Pccard Pkg: PAO-960828 APM BIOS : OK (1.1) PCIC : Cirrus Logic PD672x Cards : - 3Com EtherlinkIII 3C589C =========================================================================== Name : Yanagimoto Daigo (daigo@ori.u-tokyo.ac.jp) Machine : IBM ThinkPad 230Cs FBW (CPU Intel 486DX2 50MHz, HDD 540MB, RAM 12MB (4+8)) FreeBSD : OK (2.1.5-RELEASE) Pccard Pkg: PAO-960812 APM BIOS : OK (1.0) Config Opt: "TP230FBW" PCIC : VLSI Cards : - RATOC REX-5588 card "PCMCIA LAN MBH10304 ES" " 01" config 0x3a "fe0" 5 ether 0x328 00:c0:d0 insert echo RATOC REX-5588 Ethernet inserted insert /etc/pccard_ether $device remove echo RATOC REX-5588 Ethernet removed remove /etc/pccard_ether_remove $device - TDK DF1414 FAX/Data Modem card "TDK" "DF1414.*" config 0x23 "sio2" pio reset 1000 insert echo TDK 14.4k FAX/Data Modem inserted remove echo TDK 14.4k FAX/Data Modem removed =========================================================================== Name : Norikatsu Shigemura (41ee3142@bosei.cc.u-tokai.ac.jp) Machine : NEC PC-9821Na12/S10F (CPU Pentium 120MHz, HDD 1033MB, RAM 15.6MB) FreeBSD : OK (FreeBSD(98)2.1.0-RELEASE) Pccard Pkg: pccard-test-960414.tar.gz + pccard98-test-960414.diff.gz PCIC : PC-Card Cirrus Logic PD672X(?) Cards : - NEC PC-9801N-J15(FAX/MODEM card) card "NEC" "PC-9801N-J15" config 0x20 "sio0" 3 reset 100 insert echo NEC PC-9801N-J15 PCMCIA Modem inserted. remove echo NEC PC-9801N-J15 PCMCIA Modem removed. =========================================================================== Name : Hiroaki Nakamura (hnakamur@da2.so-net.or.jp) Machine : Gateway2000 HandBook 486 (CPU 486DX2 50MHz, HDD 720MB, RAM 20MB) FreeBSD : OK (2.1.5-RELEASE) Pccard Pkg: PAO-960812 APM BIOS : NG (1.0) Config Opt: LAPTOP, PSM_NO_RESET PCIC : Cirrus Logic PD6710 Cards : - Adaptec SlimSCSI APA-1460J - Accton Ethercard EN2212 - TDK DF2814BX =========================================================================== Name : Hiroaki Nakamura (hnakamur@da2.so-net.or.jp) Machine : Toshiba Portege 610CT (CPU Pentium 90MHz, HDD 1.3GB, RAM 40MB) FreeBSD : OK (2.1.5-RELEASE) Pccard Pkg: PAO-960812 APM BIOS : OK (1.0) Config Opt: LAPTOP PCIC : Intel 82365 Cards : - Adaptec SlimSCSI APA-1460J - Accton Ethercard EN2212 - TDK DF2814BX =========================================================================== Name : Hiroyuki Izui (izui@yk.fujitsu.co.jp) Machine : Toshiba DynaBook GT-R 575 (CPU Pentium 75MHz, HDD 810MB, RAM 40MB) FreeBSD : OK (2.2-960501-SNAP) Pccard Pkg: 960616 APM BIOS : OK (1.1) PCIC : Intel 82365 Cards : - 3Com Etherlink III 3C589B - Megahertz XJ3288J-P FAX/Modem =========================================================================== Name : Ken-ichi Hirose (kenzo-@tama.or.jp) Machine : Digital HiNote VP CSS5100 (CPU Pentium 100MHz, HDD 810MB, RAM 8MB) FreeBSD : OK (2.2-960501-SNAP) Pccard Pkg: pccard-test-960602 APM BIOS : OK (1.1) PCIC : Cirrus Logic PD672X =========================================================================== Name : Masato Yoshida (masato@ca2.so-net.or.jp) Machine : AST ASCENTIA P30CTS (CPU Pentium 100Mhz, HDD 810MB, RAM 16MB) FreeBSD : OK (2.2 960612-SNAP) Pccard Pkg: PAO-960704 APM BIOS : NO TEST (APM 1.1) Config Opt: LAPTOP PCIC : Cirrus Logic CL-PD6729? Cards : - NextCom NCM1428JA FAX/Data Modem #NextCom NCM1428JA FAX/Data Modem card "NextCom K\\.K\\." "NCM1428JA" config 0x22 "sio2" pio reset 1000 insert echo NextCom NCM1428JA inserted remove echo NextCom NCM1428JA removed - IO-DATA PCMCIA PCLA/T Ethernet Card #IO-DATA PCMCIA PCLA/T Ethernet Card card "I-O DATA" "PCLA" config default "ed0" 5 0x10 ether 0xff0 00:a0:b0 insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device =========================================================================== Name : Tatsumi Hosokawa (hosokawa@jp.FreeBSD.org) Machine : Digital Hinote Ultra II CTS5120 (CPU Pentium 120MHz, HDD 1.3GB, RAM 40MB) FreeBSD : OK (2.2-960612-SNAP) Pccard Pkg: 960731 APM BIOS : OK (1.1) Config Opt: LAPTOP PCIC : CLPD-6722 Cards : - IBM CreditCard Ethernet II - Megahertz X-Jack Ethernet - SunDisk SPDS-5 - IO data PCFM-144 FAX/Modem - Megahertz XJ3288(JP) NG-Cards : - RATOC REX-5588 =========================================================================== Name : Masato Sato (m-satou@lsi.tmg.nec.co.jp) Machine : IBM ThinkPad 340 (CPU IBM 486SLC2 25/50MHz, HDD 340MB, RAM 12M) FreeBSD : OK. (need XT_KEYBOARD kernel) (2.2-960612-SNAP) Pccard Pkg: PAO-960704 APM BIOS : NG (1.05) Config Opt: XT_KEYBOARD, LAPTOP, PSM_NO_RESET, TP340 PCIC : Intel 82365 Cards : - 3Com Etherlink III PCMCIA 3C589C - AIWA PV-JF288 - NTT DoCoMo DATA/FAX MarkII Misc Info : avoid psm isn't detected *** psm.c.org Sat Jul 20 08:52:51 1996 --- psm.c Sat Jul 20 08:54:03 1996 *************** *** 201,205 **** --- 201,209 ---- #endif c = inb(ioport+PSM_DATA); + #ifndef TP340 if(c & 0x04) { + #else + if(0) { + #endif /* printf("PS/2 AUX mouse is not found\ ");*/ psm_command(ioport, PSM_INT_DISABLE); =========================================================================== Name : Kazumasa Morishita (kchan@sag.bekkoame.or.jp) Machine : FUJITSU FMV-475NU/T (CPU i486DX4 75MHz, HDD 340MB, RAM 24MB) FreeBSD : OK (2.2-960612-SNAP) Pccard Pkg: PAO-960704 APM BIOS : OK (1.1) Config Opt: LAPTOP PCIC : Cirrus Logic PD6710 Cards : - Laneed PCMCIA Ethernet card. ELECOM LD-CDWA #Laneed PCMCIA Ethernet card. ELECOM LD-CDWA(DP83902A) card "MACNICA" "ME1-JEIDA" config default "ed0" any ether 0xb8 08:00:42 insert echo MACNICA PCMCIA Ethernet inserted insert /etc/pccard_ether $device remove echo MACNICA PCMCIA Ethernet removed remove /etc/pccard_ether_remove $device - Adaptec SlimSCSI (APA-1460) Misc Info : To use LD-CDWA under 2.2-960612-SNAP + PAO-960704, following patch (by Takashi Kurosawa ) is required. --- sys/i386/isa/if_ed.c.orig Tue Jul 9 10:41:27 1996 +++ sys/i386/isa/if_ed.c Tue Jul 9 00:57:45 1996 @@ -1346,8 +1346,15 @@ { 0x00, 0xc0, 0x1b } /* Socket EA */ }; - if (isa_dev->id_flags & ED_FLAGS_FORCE_PIO) + if (isa_dev->id_maddr == 0 + || isa_dev->id_flags & ED_FLAGS_FORCE_PIO) { sc->asic_addr = isa_dev->id_iobase + ZE_DATA_IO; + sc->mem_shared = 0; + sc->mem_start = (caddr_t) (ED_PC_PAGE_OFFSET * ED_PAGE_SIZE); + } else { + sc->mem_shared = 1; + sc->mem_start = (caddr_t) isa_dev->id_maddr; + } sc->nic_addr = isa_dev->id_iobase; sc->gone = 0; @@ -1360,6 +1367,8 @@ sc->mem_size = isa_dev->id_msize = memsize = 16384; sc->isa16bit = isa16bit = 1; + outb(sc->nic_addr + ED_P0_CR, ED_CR_RD2 | ED_CR_STP); + DELAY(5000); outb(sc->nic_addr + ED_P0_DCR, ED_DCR_WTS | ED_DCR_FT1 | ED_DCR_LS); if (ether[0] | ether[1] | ether[2] | ether[3] | ether[4] | ether[5]) { /* Etnernet addr specified by pccardd */ @@ -1436,14 +1445,6 @@ sc->rec_page_start = sc->tx_page_start + ED_TXBUF_SIZE * sc->txb_cnt; sc->rec_page_stop = sc->tx_page_start + memsize / ED_PAGE_SIZE; - if (isa_dev->id_flags & ED_FLAGS_FORCE_PIO) { - sc->mem_shared = 0; - sc->mem_start = (caddr_t) (ED_PC_PAGE_OFFSET * ED_PAGE_SIZE); - } else { - sc->mem_shared = 1; - sc->mem_start = (caddr_t) isa_dev->id_maddr; - } - sc->mem_size = memsize; sc->mem_end = sc->mem_start + memsize; @@ -1461,9 +1462,8 @@ ed_pio_writemem(sc, tpat, 16384, sizeof(tpat)); ed_pio_readmem(sc, 16384, tbuf, sizeof(tbuf)); if (bcmp(tpat, tbuf, sizeof(tpat))) { - if (bootverbose) - printf("ed%d: NIC memory failure.\ ", - isa_dev->id_unit); + printf("ed%d: NIC memory failure.\ ", + isa_dev->id_unit); return 0; } } else { =========================================================================== Name : TANAKA Hisayoshi (hihi@msr.mei.co.jp) Machine : Panasonic Let's note AL-N1 (CPU Pentium 120MHz, HDD 810MB, RAM 16MB) FreeBSD : OK (2.1.0-RELEASE) Pccard Pkg: pccard-test-960414 APM BIOS : OK (1.0) Config Opt: JETMINI PSM_NO_RESET PCIC : Intel 82365 Cards : - DLINK DE-653 - Adaptec SlimSCSI =========================================================================== Name : Koki Nishizuka (KHE01441@niftyserve.or.jp) Machine : Digital HiNote Ultra CT475 (CPU Intel DX4 75MHz, HDD 1GB(Dos+Windows3.1 400MB, FreeBSD 600MB), RAM 24MB) FreeBSD : OK (2.2-960612-SNAP) Pccard Pkg: PAO-960616 APM BIOS : OK (1.1) Config Opt: LAPTOP PCIC : Cirrus Logic PD6710 Cards : - 3Com Etherlink III PCMCIA 3C589B - 3Com Etherlink III PCMCIA 3C589C - Adaptec SlimSCSI APA-1460 - DEC Digital Mobile Media CD-ROM(FR-PCP8D-JP(x2 Speed-CDROM)) - IBM 105MB PCMCIA Hard Disk Drive - GREYSTONE DiskDock(IDE Interface) + MK1824FCV(IDE 340MB HDD) - APEX DATA MOBILE PLUS Celluar V.34 card "AD PC_CARD" "RC288ACL" config 0x23 "sio2" pio =========================================================================== Name : Shin'ichi Mukaigawa (shin@ari.ncl.omron.co.jp) Machine : Toshiba DynaBook SS-R 575 (CPU Pentium 75MHz, HDD 500MB, RAM 40MB) FreeBSD : OK (2.2-960612-SNAP) Pccard Pkg: PAO-960616 APM BIOS : OK (1.0) Config Opt: APM_PCCARD_RESUME,PCIC_RESUME_RESET PCIC : Intel 82365 Cards : - 3Com Etherlink III 3C589C - Megahertz XJ3288J Misc Info : insert/remove OK for both cards. When suspend in use XJ3288J, hang with beep. =========================================================================== Name : Tohru Kirito (kirito@yk.rim.or.jp) Machine : AT&T Globalyst 130 (CPU i486DX4 100MHz, HDD 540M, RAM 12MB) FreeBSD : OK (2.2-960612-SNAP) Pccard Pkg: PAO-960616 APM BIOS : NG PCIC : Vadem 468 Cards : - Megahertz X-Jack XJ2288 - Adaptec SlimSCSI APA-1460 - 3Com Etherlink III PCMCIA 3C589C =========================================================================== Name : Phillip Neiswanger (phil@cs.weber.edu) Machine : GateWay 2000 Solo S5-120XL Deluxe (CPU P54CLM-120 Pentium, HDD IBM-DPRA-21215 1.2 Gb IDE, RAM 40Mb) FreeBSD : Would not recognize the 3Com EtherLink III card with 2.1 of FreeBSD. (2.2-960501-SNAP) Pccard Pkg: 2.2-960602 APM BIOS : OK (I believe it is 1.0.) Config Opt: PSM_NO_RESET PCIC : Unknown (The chip set used in the computer has the brand name Opti Viper) Cards : - 3Com Corp. EtherLink III 3C589C TP/BNC Lan Card Version 2a card "3Com Corporation" "3C589" config default "nep0" any insert echo 3Com EtherLink III inserted insert /etc/pccard_ether $device remove echo 3Com EtherLink III removed remove /etc/pccard_ether_remove $device Misc Info : The above confiration for the 3Com card is one of two I have used. I also used the default variation which uses the ep0 driver. Both configurations worked, but neither ep0 or nep0 was able to detect the card on boot. Once the system was booted, you need to run ifconfig inet to get the network up. =========================================================================== Name : Koichi Shibata (shibata@kushiro-ct.ac.jp) Machine : Toshiba DynaBook GT-R 590 (CPU Pentium 90MHz, HDD 810MB, RAM 24MB) FreeBSD : OK (2.2-960501-SNAP) Pccard Pkg: 960602 APM BIOS : OK (apm: running in APM 1.0 compatible mode) (1.1?) Config Opt: APM_PCCARD_RESUME,PCIC_RESUME_RESET,SIO_SUSP_KEEP_PWR PCIC : Intel 82365 Cards : - 3Com Etherlink III 3C589C - TDK DF2814B/M - Adaptec SlimSCSI APA-1460J Misc Info : Suspend/Resume with PC cards (3Com/TDK) inserted seems to work well. =========================================================================== Name : Tatsumi Hosokawa (hosokawa@mt.cs.keio.ac.jp) Machine : Digital Hinote Ultra CS433 (CPU i486SX 33MHz, HDD 810MB, RAM 20MB) FreeBSD : OK (2.2-960501-SNAP) Pccard Pkg: 960602 APM BIOS : OK (1.1) PCIC : CL-6710 Cards : - IBM PCMCIA Creditcard Ethernet II - 3Com Etherlink III 3C589C - Planet Smart COM 2000 - Planet Smart COM 3500 - Megahertz X-Jack Ethernet - Dayna Communications CommuniCard E - Megahertz XJ1144 FAX/Modem - Megahertz XJ2144 FAX/Modem - Megahertz XJ3288-J FAX/Modem - IO data PCFM-144 FAX/Modem - Adaptec SlimSCSI APA-1460 - Epson Flash Packer 5MB - Epson Flash Packer 20MB NG-Cards : - RATOC REX-5535AMC - NewMedia BusToaster =========================================================================== Name : Johji Akiyama (geo@lsi.yokogawa.co.jp) Machine : IBM ThinkPad230Cs FBW (CPU 486DX2 50MHz, HDD HDD 540MB, RAM RAM 8MB) FreeBSD : OK (2.1) Pccard Pkg: 960414 APM BIOS : OK (1.0) Config Opt: LAPTOP, TP230FBW PCIC : VLSI 82C146 Cards : - 3Com Etherlink III PCMCIA 3C589C - Digital Cellular NTT DoCoMo DATA/FAX Adapter MarkII =========================================================================== Name : Darren R. Davis (darrend@novell.com) Machine : IBM ThinkPad 760CD (CPU Intel Pentium 120Mhz, HDD 1.2GB, RAM 24MB) FreeBSD : Success! (2.1.0 Release) Pccard Pkg: 960414 APM BIOS : Unknown (Unknown) PCIC : Intel PCIC??? =========================================================================== Name : Darren R. Davis (darrend@novell.com) Machine : Toshiba 610CT (CPU Pentium 90Mhz, HDD 750MB, RAM 40MB) FreeBSD : Success! (2.1.0 Release) Pccard Pkg: 960414 APM BIOS : Unknown (Unknown) PCIC : Intel PCIC Cards : - NE2000 Clone ed0 - Adaptec SCSI Slimline aic0 =========================================================================== Name : Yasuichiri YAMAGUCHI (guzzi@pedev.ksp.fujixerox.co.jp) Machine : Gateway 2000 Liberty (CPU i486DX4-100, HDD 720MB, RAM 24MB) FreeBSD : OK (2.2-960501-SNAP) Pccard Pkg: 960508 APM BIOS : FORCE_APM10 (1.1?) Config Opt: LAPTOP PSM_NO_RESET PCIC : Cirrus Logic PD672X Cards : - Megahertz X-Jack Ethernet - CONTEC C-NET(PC)C Ethernet - Melco LPC-T Ethernet - Epson Flash Packer 40MB - Epson Flash Packer 85MB NG-Cards : - USR Courier =========================================================================== Name : Tetsuya Michikawa (michkawa@kt.rim.or.jp) Machine : Toshiba T3400CT Portage (CPU 486SX 33MHz, HDD 520MB, RAM 20MHz) FreeBSD : OK (2.1.0-R) Pccard Pkg: 960414 APM BIOS : OK (1.0) Config Opt: LAPTOP,NEPPMHACK PCIC : Intel 82365 Cards : - 3Com Etherlink III PCMCIA 3C589B - Megahertz PCMCIA MODEM XJ1144 =========================================================================== Name : Naoki Sakuma (sac@debussy.ee.uec.ac.jp) Machine : COMPAQ CONTURA AERO 4/25 (CPU SL Enhanced 486SX 25MHz, HDD 170MB, RAM 4MB) FreeBSD : boot4.flp (2.1.0R) Pccard Pkg: 960414 APM BIOS : NG (1.1) Config Opt: LAPTOP, AERO PCIC : VLSI 82C146 Cards : - MELCO LPC-TS - TDK DF2496 DATA/FAX MODEM #GENERIC PCMCIA modem function serial config 0x23 "sio3" 5 reset 100 insert echo PCMCIA Modem inserted remove echo PCMCIA Modem removed =========================================================================== Name : Isao Harada (harada@nomad.forus.or.jp) Machine : FUJITSU FMV-475NL/S (CPU i486DX4 75MHz, HDD 340MB, RAM 8MB) FreeBSD : OK (2.1-RELEASE) Pccard Pkg: 960414 APM BIOS : OK (1.0) Config Opt: LAPTOP, NEPPMHACK PCIC : Cirrus Logic PD-6710 Cards : - 3Com Etherlink III PCMCIA 3C589C =========================================================================== Name : Hajime Tamura (lsd@kt.rim.or.jp) Machine : Gateway HandBook486 (CPU i486DX2 40MHz, HDD 260MB, RAM 8MB) FreeBSD : OK (2.1.0R) Pccard Pkg: 960418 APM BIOS : COMPAT_APM10 (1.1) Config Opt: LAPTOP Cards : - D-Link Ethernet Card DE-650 - GATEWAY200 TelePath FAX/Modem - I/O Data Flash Packer 10MB =========================================================================== Name : Dan Kogai (dankogai@jms.jeton.or.jp) Machine : Digital HiNote Ultra CS475 (CPU DX4/75MHz, HDD 504MB, RAM 24MB) FreeBSD : OK (2.1.0-Release/2.2-960323-SNAP) Pccard Pkg: 960414 APM BIOS : OK (1.1) Config Opt: LAPTOP, DHULTRA (Analogous to LEINLEIN) PCIC : Cirrus Logic PD-672x Cards : - 3Com Etherlink III (3c589B) - TDK DF2814 DATA/FAX Modem (See Conf for details) card "TDK" "DF2814 DATA/FAX MODEM" # available indice # 0x30 com1 # 0x31 com2 # 0x32 com3 # 0x33 com4 config 0x33 "sio2" 5 # config 0x33 "sio2" pio # with pio, card recongnized but silo overflows reset 1000 # don't amke it too small or probe fails insert echo TDK DF2014 DATA/FAX MODEM inserted remove echo TDK DF2014 DATA/FAX MODEM removed NG-Cards : Adaptec SlimSCSI (APA-1460) Misc Info : Installation -- SCSI CD-ROM was not available even with pccard-flp I tried following two methods; 1. Install via DOS partition 2. Install via FTP -- via 3Com Ethelink III PC (3c589B) on ze0 / zp0 SlimSCSI -- With default configuration available with pccard-test-960414, card does get recongnized, SCSI devices get properly configured. But when I actually start using them they time out! =========================================================================== Name : Toshihiro Hanawa (hanawa@aa.cs.keio.ac.jp) Machine : SOTEC WinBook Quattro 90D (CPU Pentium 90MHz, HDD 540MB (300MB for FreeBSD), RAM 24MB) FreeBSD : OK (2.1-RELEASE) Pccard Pkg: 960414 APM BIOS : OK (1.1) Config Opt: PSM_NO_RESET PCIC : Cirrus Logic PD-672x Cards : - 3Com Etherlink III PCMCIA 3C589C - TDK DF2814B card "TDK" "DF2814*" config 0x32 "sio2" any reset 800 insert echo TDK DF2814 Modem inserted remove echo TDK DF2814 Modem removed =========================================================================== Name : Masaki Kitagawa (gnf67469@pcvan.or.jp) Machine : Toshiba T3600CT (CPU i486DX2 50MHz, HDD 250MB, RAM 16MB) FreeBSD : OK (2.1.0-RELEASE) Pccard Pkg: 960328, 960414 APM BIOS : OK (1.1) Config Opt: LAPTOP PCIC : Intel 82365 Cards : - Megahertz X-Jack Ethernet =========================================================================== Name : Makiko Ishiwata (mako@zem.twcu.ac.jp) Machine : Fujitsu FMV-450NL/S (CPU i486DX2 50MHz, HDD 340MB, RAM 8MB) FreeBSD : OK (2.1.0) Cards : - 3Com Etherlink III PCMCIA 3C589C =========================================================================== Name : Takeshi Owaki (takeshi-o@aix.or.jp) Machine : Digital Equipment Corporation, Digital HiNote Ultra II CTS5120 (CPU Pentium 120MHz, HDD 1.08GB, RAM 24MB) FreeBSD : OK (2.2-960323-SNAP) Pccard Pkg: 960414 APM BIOS : OK (1.1) Config Opt: LAPTOP PCIC : Cirrus Logic PD6722 Cards : - 3Com 3C589B - Adaptec APA-1460 - Digital Mobile Media CD-ROM - Epson America Inc. EHDD170 (ATA TypeIII HD) - Epson Flash Packer 20MB (SunDisk SDP5) NG-Cards : - Megahertz (INTEGRAN) XJ2144-81 - APEX DATA Cellular Direct V.32bis RC144ACL - Maxtor MXL131 (ATA TypeIII HD) Misc Info : The kernel has options NEPPMHACK, however 3C589B does not work after resume. EHDD170 and Flash Packer are not fully tested. I checked only 'fdisk wd1' works. XJ2144-81 and RC144ACL sometimes work, but mostly does not work with message "sio2: probe test x failed." Reset time was changed to 10000, but the condition was not improved. The slot 2 and 3 of PCMCIA/FD dock works fine. On the boot sequence, the kernel sometimes panic with page fault after detecting fdc0. It is seems that the frequency of kernel panic changes depend on the kernel configuration. =========================================================================== Name : Takuro Tokuyama (tokuyama@telecom.mci.mei.co.jp) Machine : ThinkPad 230Cs (CPU Intel 486SX 33MHz, HDD 250MB, RAM 12MB) FreeBSD : OK (2.1.0 (R)) Pccard Pkg: pccard-test-960414 APM BIOS : OK (1.00) Config Opt: TP230 PCIC : VLSI 83C146 Cards : - IBM Push/Pop Modem(14.4K) config 0x23 "sio2" pio - NextCom J Link Ethernet Card =========================================================================== Name : Tomoyuki Miki (t_miki@os.rim.or.jp) Machine : NEC PC-9821 Nx/C7 (CPU i486DX/4 100MHz, HDD 720MB (WindowsNT 200MB, Windows95 300MB, FreeBSD 188MB), RAM 15.6MB) FreeBSD : OK (2.1.0 RELEASE (98) ALPHA) Pccard Pkg: 960414 APM BIOS : NG PCIC : Cirrus Logic PD-672x Cards : - 3Com Etherlink III PCMCIA 3C589C # 3Com Etherlink III 3C589B, 3C589C card "3Com Corporation" "3C589" config 0x1 "nep0" 10 insert echo 3Com Etherlink III inserted insert /etc/pccard_ether $device remove echo 3Com Etherlink III removed remove /etc/pccard_ether_remove $device - Megahertz X-Jack XJ3288-J FAX/Data Modem # Megahertz X-Jack XJ3288-J FAX/Data Modem card "Megahertz" "XJ3288-81" config 0x23 "sio2" pio insert echo Megahertz XJ3288-J Modem inserted remove echo Megahertz XJ3288-J Modem removed - Adaptec SlimSCSI APA-1460 # Adaptec SlimSCSI card "Adaptec, Inc." "APA-1460 SCSI Host " config 0x9 "aic0" 10 insert echo Adaptec Slim SCSI inserted remove echo Adaptec Slim SCSI removed NG-Cards : TDK DF2814B/M FAX/Data Modem =========================================================================== Name : Kenji Kuboyama (kenji@NetLaputa.or.jp) Machine : SHARP Mebius AV1/575CD-95 (CPU Pentium 75MHz, HDD 540MB, RAM 16MB) FreeBSD : OK (FreeBSD2.1.0R) Pccard Pkg: 960207 APM BIOS : OK (NG w/ modem card) (1.1) PCIC : Vadem468 Cards : - OMRON ME2814C card "OMRON" "ME2814 FAX/DATA MOD" config 0x23 "sio2" 5 insert echo OMRON ME2814 FAX/Modem inserted remove echo OMRON ME2814 FAX/Modem removed =========================================================================== Name : Tsutomu Itoh (t-itoh@hetero.nm.fujitsu.co.jp) Machine : FMV-475NL/T (CPU i486DX4 75MHz, HDD 810MB, RAM 24MB) FreeBSD : OK (2.2-960323-SNAP) Pccard Pkg: 960414 APM BIOS : OK (1.0) PCIC : Cirrus Logic PD-6710 Cards : - Megahertz X-Jack Ethernet - TDK DF2814 DATA/FAX Modem function serial config 0x32 "sio2" any reset 1000 insert echo PCMCIA Modem inserted remove echo PCMCIA Modem inserted =========================================================================== Name : Hans Nasten (nasten@Everyware.SE) Machine : BEST9900CD (CPU Pentium 133, HDD 1.3 GB, RAM 32 MB) FreeBSD : No problem installing FreeBSD. (2.1.0) Pccard Pkg: 960414 APM BIOS : APM doesn't seem to work at all. (Unknown) Config Opt: None PCIC : Vadem 469 Cards : - 3C589C Ethernet. card "3Com Corporation" "3C589" config 0x1 "nep0" 10 insert echo 3Com Etherlink III inserted insert /etc/pccard_ether $device remove echo 3Com Etherlink III removed remove /etc/pccard_ether_remove $device - Lasat Credit 288, V34 Data/Fax Modem. card "LASAT COMMUNICATIONS A/S" "LASAT CREDIT 288" config 0x18 "sio1" 11 insert echo LASAT Modem inserted remove echo LASAT Modem removed Misc Info : The machine has a IDE CD and a SB-Pro compatible sound hw. Both works with the FreeBSD drivers. The display controller is a CLGD7543 driving a 12" TFT display. The latest XFree86-2.1.2 beta code does not work properly. Using the hacked Cirrus driver Erik Anders together with the latest XFree86 sources works well with 8 and 16 bit visuals. The 3C589C ethernet card performs really well. I can easily saturate a ethernet with it. The modem card works equally well. I had to insert a sleep in rc.pccard to let the cards get configured before netstart tried to start the net. =========================================================================== Name : Atsuo Ohki (ohki@gssm.otsuka.tsukuba.ac.jp) Machine : Digital HiNote Ultra C475 (CPU I486DX4, HDD 520MB, RAM 16MB) FreeBSD : OK (2.2-960323-SNAP) Pccard Pkg: 960414 APM BIOS : OK (1.1) Config Opt: NONE PCIC : PD6710 Cards : - Mitsubishi M6887-3 170MB ATA Disk card card "INTEGRAL PERIPHERAL" "ATA CARD" config 0x03 "wdc1" 15 - Mitsubishi B8899 Fax Modem card "MITSUBISHI ELECTRIC" "B8899" config 0x23 "sio1" 11 - 3Com EtherLink III 3C589B card "3Com Corporation" "3C589" config 0x01 "nep0" 10 - HP Flash Memory Card card "SunDisk" "SDP5" config 0x03 "wdc1" 15 Misc Info : Every ATA Disk Card I tested are manufactured by INTEGRAL PERIPHERALS, and work with the same configuration. =========================================================================== Name : Atsuo Ohki (ohki@gssm.otsuka.tsukuba.ac.jp) Machine : Mitsubishi Amity/VC (CPU I486DX2, HDD 340MB, RAM 24MB) FreeBSD : OK (2.2-960323-SNAP) Pccard Pkg: 960414 APM BIOS : NG (1.1) Config Opt: NONE PCIC : RICOH RF5C396 Cards : - Mitsubishi M6887-3 170MB ATA Disk card card "INTEGRAL PERIPHERAL" "ATA CARD" config 0x03 "wdc1" 15 - Mitsubishi B8899 Fax Modem card "MITSUBISHI ELECTRIC" "B8899" config 0x23 "sio1" 9 - 3Com EtherLink III 3C589B card "3Com Corporation" "3C589" config 0x01 "nep0" 10 Misc Info : The internal hard disk is actually an ATA Disk Card. Original one is VIPER 170 (170MB), but I replaced with 340MB ATA Disk Card of MIRCOTECH INTERNATIONAL. Every ATA Disk Card I tested are manufactured by INTEGRAL PERIPHERALS, and work with the same configuration. APM does not work. After resuming, no command can run correctly, although kernel seems to work. Commands dump core with Memory fault, I/O error, etc. Any APM specific options do not change the situation. =========================================================================== Name : Thomas Traylor (tst@titan.cs.mci.com) Machine : Dell 320 SLi (CPU 386DX, HDD 80MB, RAM 10MB) FreeBSD : OK (2.2-960323-SNAP) Pccard Pkg: pccard-test-960414 APM BIOS : OK (1.0) Config Opt: LAPTOP PCIC : PC-Card INTEL 82365 Cards : - Megahertz XJ10BT/XJ10BC Ethernet card - Megahertz XJ2288 Modem Misc Info : Even though I can communicate with the Megahertz XJ2288 Modem, I haven't been able to get the modem to connect successfully to a remote system. Once the modem connect it seems the buffer overflows and connection is dropped. I'm not running X11 on my laptop because of the lack of diskspace. =========================================================================== Name : Takahiro Kurosawa (kurosawa@sail.t.u-tokyo.ac.jp) Machine : Compaq CONTURA 410C (CPU i486DX2 50MHz, HDD 689MB, RAM 12MB) FreeBSD : OK (2.2-960323-SNAP) Pccard Pkg: 960414 APM BIOS : APM_SUSPEND_DELAY (1.1) Config Opt: LAPTOP, CONTURA PCIC : VLSI 82C146 Cards : - Melco LPC-T - Allied Telesis LA-PCM - D-Link DE-650 - Megahertz X-Jack XJ2144-81 =========================================================================== Name : Masahide Abe (masahide@ecei.tohoku.ac.jp) Machine : SOTEC WinBookPro100T (CPU i486DX4 100MHz, HDD 540MB, RAM 8MB) FreeBSD : OK (zpfix.flp) (2.1.0) Pccard Pkg: 960308 Config Opt: WINBOOKPRO, NEPPMHACK, PSM_NO_RESET Cards : - 3Com Etherlink III PCMCIA 3C589C =========================================================================== Name : Keiichi Urabe (k1-urabe@yukikaze.kodaira.tokyo.jp) Machine : Gateway 2000 Liberty (CPU Intel DX4 100MHz, HDD 700MB, RAM 24MB) FreeBSD : OK (2.1.0R) Pccard Pkg: 960328 APM BIOS : OK (1.1) Config Opt: LAPTOP PCIC : Cirrus Logic PD672X Cards : - 3Com Etherlink III PCMCIA 3C589B - Megahertz XJ2288 FAX/Modem - I/O Data PCFM144 FAX/Modem - Adaptec SlimSCSI APA-1460 =========================================================================== Name : Taisuke Boku (taisuke@is.tsukuba.ac.jp) Machine : IBM ThinkPad 530Cs (CPU i486DX/4 100MHz, HDD 700MB, RAM 12MB) FreeBSD : OK (2.1.0R) Pccard Pkg: 960207 APM BIOS : OK (1.1) Config Opt: TP530 Cards : - IBM PCMCIA Creditcard Ethernet II - 3Com Etherlink III PCMCIA 3C589B - 3Com Etherlink III PCMCIA 3C589C - Megahertz X-Jack XJ2144 FAX/Modem - Megahertz X-Jack XJ3288-J FAX/Modem - RATOC REX-5535 Misc Info : System hangs-up on Suspend/Hybernation when FAX/Modem PCMCIA card is inserted. The card must be removed before Suspend/Hybernation. =========================================================================== Name : Tomoaki NISHIYAMA (ss56363@hongo.ecc.u-tokyo.ac.jp) Machine : Fujitsu FMV-5100NA/W (CPU Pentium 100MHz, HDD 810MB, RAM 16MB) FreeBSD : OK (2.1.0-RELEASE, 2.2-960323-SNAP) Pccard Pkg: 960318,960323 APM BIOS : OK (1.1) PCIC : PC-Card Cirrus Logic PD6710 Cards : - ACCTON EN2212-1 - Adaptec APA-1460J(Slim SCSI) =========================================================================== Name : Yasuhiko Nakashima (nakashim@pine.mfd.cs.fujitsu.co.jp) Machine : FUJITSU BIBLO FMV-575NA/X (CPU Pentium 75MHz, HDD 800MB, RAM 72MB) FreeBSD : OK (2.1.0R) Pccard Pkg: 960328 APM BIOS : APM=OFF (1.1) Config Opt: NONE PCIC : Cirrus Logic PD6710 Cards : - IBM PCMCIA Ethernet I/II - Fujitsu FMV-J181 - Fujitsu FMV-J182 - Fujitsu FAX/DATA MODEM - Panasonic Modem Card CF-JMD101 card "Panasonic" "CF-JMD101" config 0x21 "sio1" 16 reset 200 insert echo Panasonic CF-JMD101 inserted remove echo Panasonic CF-JMD101 removed - Adaptec SlimSCSI =========================================================================== Name : Toshimitsu Miyake (miyake@nalgo.co.jp) Machine : SOTEC WinBookPro100T (CPU i486DX4 100MHz, HDD 530MB, RAM 24MB) FreeBSD : OK (2.1.0R) APM BIOS : NG(?) (apm0: found APM BIOS version 53.14) Config Opt: PSM_NORESET PCIC : CL-PD67xx (?) Cards : - 3Com Ehterlink III PCMCIA 3C589C (PCMCIA) =========================================================================== Name : Hidekazu Tsunenari (htnari@imasy.or.jp) Machine : Fujitsu FMV-475NL/T (CPU i486DX4 75MHz, HDD 340MB, RAM 8MB) FreeBSD : OK (2.2-960323-SNAP) Pccard Pkg: 960328 APM BIOS : OK (1.0) PCIC : Cirrus Logic PD-6710 Cards : - 3Com Etherlink III PCMCIA 3C589C =========================================================================== Name : Mark Diekhans (markd@grizzly.com) Machine : Samsung SensLite 200 (CPU 486 DX4/75, HDD 520MB, RAM 20MB) FreeBSD : OK (2.1) Pccard Pkg: 960328 APM BIOS : No, have yet to try FORCE_APM10 (1.1) Config Opt: Nothing special, have experimented with SIO bug options PCIC : Cirrus Logic PD6710 Misc Info : Have Cardinal 28.8 modem (not mentioned in README) that does not work. A lot of people report that this modem works very well on other systems. Video chip is Cirrus Logic CLGD6245, not official support by XFree86. Works fine with VGA 16 server but have been unable to get it working with XF86_SVGA dispite support for other chips in the family. Comments in code suggest that CLGD62X5 support is not well tested. Very nice subnotebook. =========================================================================== Name : Koichi Yasuda (koichi@tama.prug.or.jp) Machine : IBM Think Pad 230Cs FBW (CPU i486DX2 50MHz, HDD 540MB, RAM 12MB) FreeBSD : OK (2.1.0-R) Pccard Pkg: 960318 APM BIOS : OK (1.0) Config Opt: LAPTOP, TP230FBW, NEPPMHACK PCIC : VLSI 82C146 Cards : - 3Com Etherlink III PCMCIA 3C589B COMB # 3Com Etherlink III 3C589B, 3C589C card "3Com Corporation" "3C589" config 0x1 "nep0" 11 reset 10000 insert echo 3Com Etherlink III inserted insert /etc/pccardether $device remove echo 3Com Etherlink III removed remove /sbin/ifconfig $device delete - Megahertz X-Jack XJ3288J FAX/Modem # Megahertz XJ3288 (JP) card "Megahertz" "XJ3288-81" config 0x23 "sio2" 5 insert echo Megahertz XJ3288 inserted remove echo Megahertz XJ3288 removed NG-Cards : Allied Telesis LA-PCM-T =========================================================================== Name : Julian Elischer (julian@freebsd.org) Machine : TI-Travelmate 4000DX2-50 (CPU 486DX2-50, HDD 150MB, RAM 8MB (4MB works fine)) FreeBSD : FreeBSD works fine after dissableing "Advnced OS Power Saving" without disabling this feature, the floppy doesn't work with BSD (386BSD-0.1->FreeBSD-2.1R) Pccard Pkg: HAS NO PCCARD SLOTS APM BIOS : APM is not in BIOS on this machine.. (uses Win drivers) Misc Info : This is the same machine Bill Jolitz wrote 386BSD on. It is from 1992 and pre PCCARD. =========================================================================== Name : Stephen F. Combs (CombsSF@Salem.GE.COM) Machine : IBM Thinkpad 755CSE (CPU Intel DX4 (100MHz), HDD 512MB, RAM 16MB) FreeBSD : OK (2.1.0-Release) Pccard Pkg: pccard-test-960328 APM BIOS : Not Yet -> NG (1.1) PCIC : STD IBM PCCard controller Cards : - Megahertz XJ2288 28.8 Modem card - 3Com 3C589C PCMCIA Ethernet Controller Misc Info : Would be nice if I could drive my MWave stuff! =========================================================================== Name : Mike Barnes (mbarnes@lcs-vger.mgh.harvard.edu) Machine : TI Travelmate 5200 (CPU P120, HDD 1.2GB, RAM 16MB) FreeBSD : OK (2.1-Release) Pccard Pkg: pccard-test-960123 APM BIOS : OK Cards : - 3Com Corporation 3C589B, 3C589C card "3Com Corporation" "3C589" config 0x1 "ep0" 10 insert /sbin/ifconfig ep0 inet "your ip addr" netmask "your net mask" link1 remove /sbin/ifconfig ep0 down Misc Info : XFree86 3.1.2D works well for the 800x600 LCD screen. However, you need to get into windows 95 and within TI-Setup turn Expanded Mode OFF. You also need to TURN OFF your machine in addition to rebooting for the changes to take effect. The only current problem with X-windows is that you cannot switch screens or exit X without losing sync. I have reported this to XFree86. Earlier versions of XFree86 do not work because of lack of support for the Cirrus CLGD-7543. The relevant sections of /etc/XF86Config are: ... for your mouse... Device "/dev/psm0" Emulate3Buttons ...under Monitor... HorizSync 31.53,42.59 VertRefresh 67.6,60 ModeLine "800x600" 42.59 800 824 984 1000 600 603 609 630 ...under Device... VideoRam 2048 Membase 0x06000000 Clocks 42.59 ... under screen... Depth 16 Option "Linear" APM works but is somewhat flaky. You can often suspend with 'zzz', but often the machine hangs. PCCARD-TEST works very well. Other device settings for config file: psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr controller snd0 device sb0 at isa? port 0x220 conflicts irq 5 drq 1 vector sbintr options "SBC_IRQ=5" options "SBC_DMA=1" device sbxvi0 at isa? drq 5 options "SB16_DMA=5" options "JAZZ16" options "JAZZ16_DMA=5" device opl0 at isa? port 0x388 device apm0 is isa? In general, I have been very happy with this machine. It works great under FreeBSD! =========================================================================== Name : Kazuki Kinoshita (kazuki@hara.cs.keio.ac.jp) Machine : NEC PC9821 Na7 (CPU Pentium 75MHz, HDD IDE 720MB; SCSI 1GB, RAM 15.6MB) FreeBSD : OK (FreeBSD(98) 2.0.5R) PCIC : NEC PC-Card Controller(?) NG-Cards : RATOC REX-9836A TDK DF2814BX(FAX/Modem Card) =========================================================================== Name : Hidetoshi Kimura (h-kimura@tokyo.se.fujitsu.co.jp) Machine : FMV-450NL/S (FUJITSU) (CPU 486DX2 50MHz, HDD 340M, RAM 16M) FreeBSD : OK (FreeBSD-960323-SNAP) Pccard Pkg: pccard-test-960328 APM BIOS : OK (V1.0) PCIC : PD6710 Cards : - Adaptic SlimSCSI - Fujitsu FMV-J181 - Fujitsu FMV-J182 - Fujitsu FMV-J182A card "FUJITSU" "LAN Card\\(FMV-J182\\)" config 0x38 "fe0" 10 ether 0x1CC insert echo Fujitsu FMV-J182 insert /etc/pccard_ether $device remove echo Fujitsu FMV-J182 remove /etc/pccard_ether_remove $device - Fujitsu FMV-JMD712 FAX/Modem card "FUJITSU" "FC14F5" config 0x22 "sio1" 3 ether insert echo Fujitsu FMV-JMD712 FAX/Modem remove echo Fujitsu FMV-KMD712 FAX/Modem =========================================================================== Name : Eiji Matsumoto (ematsu@pfu.co.jp) Machine : FMV BIBLO 475NL/S (CPU i486DX4 75MHz, HDD 504MB, RAM 16MB) FreeBSD : OK (2.1.0-RELEASE) Pccard Pkg: 960328 APM BIOS : NG (1.0) Config Opt: LAPTOP PCIC : Cirrus Logic PD-6710 Cards : - Melco LPC-T =========================================================================== Name : Takahiro Yugawa (yugawa@orleans.rim.or.jp) Machine : TOSHIBA DynaBook SS475 (CPU i486DX4 75MHz, HDD 500MB, RAM 8MB) FreeBSD : OK (2.1.0-RELEASE) Pccard Pkg: 960308 APM BIOS : OK (1.1) Config Opt: LAPTOP PCIC : Intel 82365 Cards : - 3Com Etherlink III PCMCIA 3C589C - Megahertz X-Jack XJ2144-81 FAX/Modem - Hewlett-Packard F1012A Flash ATA 5MB card "SunDisk" "SDP5" config 0x3 "wdc1" 11 insert echo Sundisk Flash ATA inserted remove echo Sundisk Flash ATA removed Misc Info : As you see above, Hewlett-Packard's Flash ATA is the OEM of SunDisk's. =========================================================================== Name : Eriko Yugawa (jasmin@rapid.co.jp) Machine : IBM ThinkPad 220 (CPU 386SLC 16MHz, HDD 340MB, RAM 6MB) FreeBSD : OK (2.1.0-RELEASE) Pccard Pkg: 960308 APM BIOS : FORCE_APM10 (1.0) Config Opt: LAPTOP PCIC : Intel 82365 Cards : - 3Com Etherlink III PCMCIA 3C589C - Megahertz X-Jack XJ2144-81 FAX/Modem =========================================================================== Name : Tatsuto, TOYONAGA (toyonaga@msd.ts.fujitsu.co.jp) Machine : Fujitsu FMV-475NL/s model 340s (CPU Intel 486DX4 75MHz, HDD 340 megabytes, RAM 8 + 24 megabytes) FreeBSD : OK (2.1.0-RELEASE, 2.2-960130-SNAP) APM BIOS : OK (1.0) Misc Info : after wake up from APM sleep, X's pointing device (Logitec MouseMan) acts strange -- the area over which the mouse cursor moved unintensionally "selected" (in reverse video) and "pasted" (numerous error messages from shell follows). =========================================================================== Name : Takumi Yoshihara (takumi@cec.co.jp) Machine : INNOVA NOTE 475CST-340 (CPU i486DX4 75MHz, HDD 340MB, RAM 16MB) FreeBSD : OK (2.1.0-RELEASE #0) Pccard Pkg: 960321 PCIC : Cirrus Logic PD-6710 Cards : - Planet SmartCOM CreditCard/2000 - Adaptec SlimSCSI APA-1460 NG-Cards : - SMC Elite Card =========================================================================== Name : Makoto Kimura (kimura@ozawa.elec.keio.ac.jp) Machine : SOTEC WinBookPro 100 (CPU 486DX4 100MHz, HDD 800MB, RAM 24MB) FreeBSD : OK (2.1.0-Release) Pccard Pkg: 960318 , 960328 APM BIOS : NG (1.1) Config Opt: LAPTOP, WINBOOK Cards : - Melco LPC-T Misc Info : "zzz" can't work. I made kernel with this options. options WINBOOKPRO device apm0 at isa? Boot message seems to be normal. But, if I execute "zzz", then Mar 31 14:58:08 winbook /kernel: resumed from suspended mode (slept 00:00:03) Mar 31 14:58:08 winbook /kernel: resumed from suspended mode (slept 00:00:03) only this message was shown. Nothg happens. =========================================================================== Name : Yoshitaka Kashiwagi (kasiwagi@yaskawa.co.jp) Machine : Panasonic PRONOTE jet mini (CPU i486DX2 50MHz, HDD 810MB, RAM 16MB) FreeBSD : OK (2.2-960323-SNAP) Pccard Pkg: 960328 APM BIOS : OK, FORCE_APM10 (1.1) Config Opt: LAPTOP, JETMINI PCIC : RICOH RF5C396L Cards : - 3Com Etherlink III PCMCIA 3C589B - Megahertz X-Jack XJ2144-81 FAX/Modem - RATOC REX-5535X =========================================================================== Name : Peter Rostin (russin@dynas.se) Machine : BEST Note 9200 (CPU Intel DX4-100, HDD 776M, RAM 16M) FreeBSD : OK (2.0.5-RELEASE) Cards : - 3COM Etherlink III, 3C589B zp driver in std distrib =========================================================================== Name : Kazuyoshi Uesaka (uesaka@mk.ecei.tohoku.ac.jp) Machine : AST ASCENTIA950N (CPU Pentium 75MHz, HDD 500M, RAM 16M) FreeBSD : OK (2.1.0-RELEASE) Pccard Pkg: 960318 APM BIOS : OK (1.1) PCIC : Cirrus Logic PD-672X Cards : - EPCMCIA-T ETHERNET V1.0 ?? card "PCMCIA" "ETHERNET V1.0" config 0x1 "ed0" 10 0x10 ether 0xff0 insert echo PCMCIA ETHERNET V1.0 inserted insert /etc/pccardether remove echo PCMCIA ETHERNET V1.0 removed remove /sbin/ifconfig ed0 delete =========================================================================== Name : Yasuharu Koike (koike@square.mk.toyota.co.jp) Machine : IBM ThinkPad230Cs FBW (CPU 486DX2 50MHz, HDD 540MB, RAM 12MB) FreeBSD : OK (2.1) Pccard Pkg: 960318 APM BIOS : OK (1.0) Config Opt: LAPTOP, TP230FBW PCIC : VLSI 82C146 Cards : - 3Com Etherlink III PCMCIA 3C589C - Adaptec SlimSCSI APA-1460 - Megahertz X-Jack XJ2288 FAX/Modem card "MEGAHERTZ" "XJ2288" config 0x23 "sio1" 5 insert echo Megahertz XJ2288 inserted remove echo Megahertz XJ2288 removed =========================================================================== Name : Hiroshi Maruyama (maruyamh@cc.saga-u.ac.jp) Machine : Toshiba T3400/120 Portege (CPU i486SX 33MHz, HDD 120MB, RAM 12MB) FreeBSD : OK (2.1R) Pccard Pkg: 960328 APM BIOS : OK (APM 1.0) PCIC : intel 82365 Cards : - 3Com Etherlink III 3C589C =========================================================================== Name : Yoshikazu Watanabe (nabe2@akira.ee.sophia.ac.jp) Machine : IBM ThinkPad 701C (CPU i486DX4 75MHz, HDD 720MB, RAM 24MB) FreeBSD : OK (2.1.0-RELEASE) APM BIOS : NG (1.1) Cards : - 3Com Etherlink III PCMCIA 3C589B Misc Info : I can use APM commands, such as `apm -a,' `apm -b,' and `apm -l.' But suspend and resume functions do not work correctly. =========================================================================== Name : Hiroaki Tsuruoka (tsuru@dr1.uwajima-mh.go.jp) Machine : DEC Ditital Hinote CS433 (CPU i486SX 33MHz, HDD 260MB, RAM 8MB) FreeBSD : OK (2.1-RELEASE) Pccard Pkg: 960308 APM BIOS : COMPAT_APM10 (1.1) Config Opt: LAPTOP, HINOTE, NEPPMHACK PCIC : Cirrus Logic PD-672x Cards : - 3Com Etherlink III PCMCIA 3C589B, 3C589C NG-Cards : - =========================================================================== Name : Negishi Satoshi (onion@todo.csl.ntt.jp) Machine : Compaq LTE ELITE 4/75CX (CPU i486 DX4 (486-class CPU), HDD 540MB, RAM 24MB) FreeBSD : OK. (2.1.0R) Pccard Pkg: pccard-test960328 APM BIOS : APM_SUSPEND_DELAY (0.1) Cards : - IBM Push/Pop 14.4K modem =========================================================================== Name : Takahiro Nakamura (Takahiro.Nakamura@Zodiac.IIJnet.or.jp) Machine : Gateway2000 LIBERTY (CPU i486DX4 100MHz, HDD 516MB, RAM 24MB) FreeBSD : OK (2.1.0-RELEASE) Pccard Pkg: 960328 APM BIOS : OK (1.0) Config Opt: LAPTOP, GW2KLIBERTY PCIC : Cirrus Logic PD672X Cards : - RATOC REX-9821 - 3Com Etherlink III PCMCIA 3C589B - 3Com Etherlink III PCMCIA 3C589C Misc Info : I don't know why RATOC REX-9821 could run as fe0. (It's for NEC PC98 note :-) =========================================================================== Name : Torsten Grust (Torsten.Grust@uni-konstanz.de) Machine : PACOMP (CPU Cyrix 486DLC 66MHz, HDD 340MB, RAM 12MB) FreeBSD : OK (2.1.0-RELEASE) Pccard Pkg: 960207 APM BIOS : NG (1.1) Config Opt: LAPTOP PCIC : Vadem 486 Cards : - 3COM 3c589c config 0x1 "nep0" 10 - Dell Dacom Modem/FAX V32.bis config 0x21 "sio1" 10 Misc Info : Using APM makes the machine freeze early during boot. =========================================================================== Name : Andreas Kohout (shanee@rabbit.augusta.de) Machine : DECpc 425SL (CPU i486DX 25MHz, HDD 210MByte, RAM 8NByte) FreeBSD : OK (2.1.0-RELEASE) APM BIOS : OK (1.1) =========================================================================== Name : Kenzi Watanabe (watanabe@sys.wakayama-u.ac.jp) Machine : SOTEC WinBook SC (CPU i486 SX, 33MHz, HDD 249MB (511936 sectors), 842 cyls, 16 heads, 38 S/T, 512 B/S, RAM 20971520 (20480K bytes)) FreeBSD : OK (disabled unused devices by kernel -c) (FreeBSD 2.1.0-RELEASE) Pccard Pkg: pccard-test-960207 Config Opt: LAPTOP, WinBookPro PCIC : PC-Card Cirrus Logic PD672X (5 mem & 2 I/O windows) Cards : - Megahertz XJ3288 (JP) (PCMCIA) # Megahertz XJ3288 (JP) card "Megahertz" "XJ3288-81" config 0x23 "sio2" 10 insert echo Megahertz XJ3288-81 inserted remove echo Megahertz XJ3288-81 removed NG-Cards : 3Com Etherlink III 3C589C =========================================================================== Name : Mitsuhide Sato (mit-sato@ari.bekkoame.or.jp) Machine : SOTEC WinBookPro J3 DX4 100C (CPU i486DX4 100MHz, HDD 540MB, RAM 24MB) FreeBSD : OK (2.1.0-RELEASE) Pccard Pkg: 960328 APM BIOS : NG PCIC : Cirrus Logic PD672X Cards : - 3Com Etherlink III PCMCIA 3C589C - AIWA PV-JF288 - NextCom J Link NC5310 - TDK 14.4 FAX/Data Modem =========================================================================== Name : Kazuhisa Yuki (yuki@med.kyoto-u.ac.jp) Machine : IBM ThinkPad 230Cs YB7 (CPU SL Enhanced i486SX 33MHz, HDD 800M, RAM 12M) FreeBSD : OK (2.2-960323-SNAP) Pccard Pkg: 960328 APM BIOS : OK (1.0) Config Opt: TP230, LAPTOP PCIC : VLSI 82C146 Cards : - 3Com Etherlink III PCMCIA 3C589B - Megahertz X-Jack XJ2144-81 FAX/Modem - RATOC REX-5535XM =========================================================================== Name : Fumikazu Yagishita (bun@fdi.fujitsu.co.jp) Machine : FUJITSU FMV-475NL/S (CPU i486DX4 75MHz, HDD 340MB, RAM 24MB) FreeBSD : OK (2.2-SNAP-960323) Pccard Pkg: 960328 PCIC : Cirrus Logic PD-6710 Cards : - Adaptec SlimSCSI APA-1460 - Farallon EtherMac - APEX DATA MOBILE PLUS card "AD PC_CARD" "RC288ACL" config 0x23 "sio1" 10 insert echo APEX DATA MOBILE PLUS inserted remove echo APEX DATA MOBILE PLUS removed =========================================================================== Name : Tohru Kirito (kirito@yk.rim.or.jp) Machine : AT&T Globalyst 130 (CPU i486DX4 100MHz, HDD 540MB, RAM 12MB) FreeBSD : OK (2.1R) Pccard Pkg: 2.1.0-RELEASE(960328) APM BIOS : NG (1.0) Config Opt: LAPTOP PCIC : Vadem 468 Cards : - Megahertz X-Jack XJ2288 - Adaptec SlimSCSI APA-1460 - 3Com Etherlink III PCMCIA 3C589C =========================================================================== Name : Nobuhiro Yasutomi (nobu@psrc.isac.co.jp) Machine : IBM TP230Cs YB7 (CPU Intel 486SX 33MHz, HDD 250M bytes, RAM 12M bytes) FreeBSD : OK (Floppy Installation) (2.2-960323-SNAP) Pccard Pkg: pccard-test-960328 APM BIOS : OK (1.0) Config Opt: LAPTOP, TP230, NEPPMHACK PCIC : VLSI Cards : - CONTEC C-NET(PC)C Misc Info : Using CONTEC's card: No NEPPMHACK option becomes access failear (hangup) after apm resumimg. =========================================================================== Name : Yasuichiro YAMAGUCHI (Yasuichiro.Yamaguchi@fujixerox.co.jp) Machine : GW2K Liberty (CPU i486DX4-100, HDD 710MB, RAM 8MB) FreeBSD : OK (2.1.0-RELEASE) Pccard Pkg: 960328 APM BIOS : FORCE_APM10 (1.0) Config Opt: LAPTOP, GW2KLIBERTY, PSM_NO_RESET NG-Cards : - USRobotics Courier Dual Standard PC Card V.34 Fax/Modem =========================================================================== Name : Hisashi Hiramoto (hiramoto@chs.nihon-u.ac.jp) Machine : DEC Digital HiNote Ultra CT475 (CPU DX4 75MHz, HDD 400MB for FreeBSD, RAM 24M) FreeBSD : OK (2.2-current (around Apr. 1)) Pccard Pkg: 930328 APM BIOS : OK (1.1) PCIC : Cirrus Logic PD-6710 Cards : - DEC Digital Mobile Media CD-ROM card "Digital Equipment Corporation\\." Digital Mobile Media CD-ROM" config 0xb "wdc1" 15 - IBM Ethernet II - Megahertz XJ3288J-P FAX/Modem card "M(EGAHERTZ|egahertz)" "XJ([12]144|[23]288)(\\-[09]+)?" config 0x23 "sio1" 10 =========================================================================== Name : Ken Sakaeda (saka@pfu.co.jp) Machine : IBM ThinkPad 530Cs (CPU i486DX2 50MHz, HDD 810MB, RAM 20MB) FreeBSD : OK (2.1) Pccard Pkg: 960308 APM BIOS : OK (1.1) Config Opt: LAPTOP Cards : - 3Com Etherlink III PCMCIA 3C589B - 3Com Etherlink III PCMCIA 3C589C - Megahertz X-Jack XJ2288 FAX/Modem =========================================================================== Name : Martin Renters (martin@tdc.on.ca) Machine : Toshiba T4800CT (CPU 486DX75, HDD 328MB, RAM 12MB) FreeBSD : OK (2.1-RELEASE) Pccard Pkg: Feb 1996 (not sure which) APM BIOS : OK (1.0) PCIC : Intel 82365 Cards : - Smart ST1414L Fax/Voice/Modem card "CIRRUS LOGIC" "FAX MODEM" config 0x22 "sio2" 10 =========================================================================== Name : Stein M. Sandbech (stein@ife.no) Machine : Olivetti Echos P90 (CPU Pentium 90MHz, HDD 810MB, RAM 24MB) FreeBSD : OK (2.1R off WC CD-ROM) Misc Info : XFree86 3.1.2 without problems. Using SVGA driver for X11. The glidepoint mouse is OK, using PS/2 mouse driver (psm0). The internal (Exchangable) CD-ROM is OK, using IDE driver. Tested with SWiM 1.2.3 Motif, OK. =========================================================================== Name : Takashi Saeki (saeki@saskg.semicon.sony.co.jp) Machine : IBM ThinkPad230Cs YB5 (CPU i486SX 33MHz, HDD 720MB, RAM 12MB) FreeBSD : OK (2.2-960323-SNAP) Pccard Pkg: 960328 APM BIOS : OK (1.0) Config Opt: LAPTOP, TP230, NEPPMHACK PCIC : VLSI 82C146 Cards : - 3Com Etherlink III 3C589C - NTT-IT ThunderCard AVF288 # NTT-IT ThunderCard AVF288 card "NTT-IT CO\\., LTD" "ThunderCard AVF288, V\\.34" config 0x22 "sio2" 5 reset 1000 insert echo ThunderCard AVF288 inserted remove echo ThunderCard AVF288 removed =========================================================================== Name : Sebastian Strollo (seb@erix.ericsson.se) Machine : Dell Latitude XPi 120ST (CPU Pentium 120Mhz, HDD 810MB, RAM 16MB) FreeBSD : No problem. (2.1.0) Pccard Pkg: pccard-test-960328 APM BIOS : OK (1.1) Config Opt: LAPTOP Cards : - 3Com Etherlink III PCMCIA 3C589B - Dell Gold Card PCMCIA Modem (actually made by PSION DACOM) card "Dell" "Gold Card PCMCIA Modem" config 0x23 "sio2" 10 insert echo "Dell Gold Card Modem inserted" remove echo "Dell Gold Card Modem removed" Misc Info : With the generic kernel you must disable "Smart CPU Mode" in your BIOS setup. If you don't youre CPU speed wont be detected right, and your machine will be slooow. ===========================================================================