*** xdatplot-0.2/patchlevel.h Mon Mar 28 17:05:42 1994
--- xdatplot-0.2.1/patchlevel.h Mon Mar 28 12:03:16 1994
***************
*** 0 ****
--- 1 ----
+ #define PATCHLEVEL 1
*** xdatplot-0.2/ChangeLog Mon Mar 28 00:49:33 1994
--- xdatplot-0.2.1/ChangeLog Mon Mar 28 16:09:22 1994
***************
*** 1,5 ****
--- 1,25 ----
Mon Mar 28 00:48:45 1994 Leon Avery (leon@eatworms.swmed.edu)
+ * xdatplot.c (dup_strings): duplicate all String application
+ resources, so they can later be freed without messing the heap.
+ Got rid of helpPrintCommand resource, which is no longer used.
+
+ * Imakefile.in: Added targets to build distribution.
+
+ * patchlevel.h: created.
+
+ * help/accbin.html: Fixed documentation to cover a screw-up in
+ ACCBIN format #2. Wayne wrote in the description that there were
+ 144 floating-point channel parameters at offset 61, 576 bytes.
+ That was a mistake: it was 36 numbers, 144 bytes. When I
+ discovered this error, I made another: I fixed ACCBIN, not the
+ documentation. Before I realized the error, I had released
+ xdatplot-0.2. So I've decided, rather than change the file format
+ and cause possible file compatibility problems, I'll just fix the
+ documentation and call those extra 432 bytes "reserved".
+
+ * released xdatplot-0.2.
+
* Vt.c: Added Wayne's new ACCBIN as native format.
* asc2bin.c: Changed to use Wayne's new ACCBIN.
*** xdatplot-0.2/Imakefile Mon Mar 28 01:25:56 1994
--- xdatplot-0.2.1/Imakefile Mon Mar 28 16:19:10 1994
***************
*** 74,79 ****
--- 74,88 ----
BINDIR = /usr/local/bin
+ BINDIST = SunOS4.1.3_binaries
+ VERSION:sh = echo $PWD | sed -e 's/^.*\/\([^\/]*\)$/\1/'
+ DISTHELPDIR = $(VERSION)_help
+ DISTSOURCE = $(VERSION).tar
+ EXCLUDE = $(BINDIST) $(PROGRAMS) \
+ $(DISTHELPDIR) $(DISTHELPDIR).tar $(DISTHELPDIR).tar.gz \
+ $(DISTSOURCE) $(DISTSOURCE).gz \
+ dist exclude
+
SRCS1 = xdatplot.c files.c mainw.c fildialog.c control.c \
plot.c help.c marks.c mif.c ps.c conversion.c filter.c \
units.c xdp.c peaks.c Vt.c run.c
***************
*** 83,92 ****
all:: $(PROGRAMS)
- distclean: clean
- $(RM) $(PROGRAMS) file2c
- (cd help; $(RM_CMD) "#"*)
-
CleanTarget()
InstallMultiple($(PROGRAMS) $(SCRIPTS), $(BINDIR))
--- 92,97 ----
***************
*** 105,114 ****
MakeDir($(DESTDIR)$(XAPPLOADDIR))
$(INSTALL) $(INSTAPPFLAGS) XDatplot.ad $(DESTDIR)$(XAPPLOADDIR)/XDatplot
! /*
! Makefile:: Imakefile
! (cd $(srcdir); xmkmf -a)
! */
Imakefile: Imakefile.in config.status
$(SHELL) config.status
--- 110,157 ----
MakeDir($(DESTDIR)$(XAPPLOADDIR))
$(INSTALL) $(INSTAPPFLAGS) XDatplot.ad $(DESTDIR)$(XAPPLOADDIR)/XDatplot
! distclean: clean
! $(RM) $(PROGRAMS) file2c
! (cd help; $(RM_CMD) "#"*)
!
! realclean: distclean
! $(RM) -rf $(EXCLUDE) *.tar *.tar.gz
!
! help.tar.gz: distclean
! mkdir $(VERSION)_help
! (cd help; tar cf - *) | (cd $(VERSION)_help; tar xf -)
! tar cf $(VERSION)_help.tar $(VERSION)_help
! nice gzip -v $(VERSION)_help.tar
!
! binaries: distclean
! $(MAKE) CDEBUGFLAGS=-O2 BINDING=-static $(PROGRAMS)
! strip $(PROGRAMS)
! $(RM) -rf $(BINDIST)
! mkdir $(BINDIST)
! $(MV) $(PROGRAMS) $(BINDIST)
! $(CP) $(SCRIPTS) $(BINDIST)
! (cd $(BINDIST); nice gzip -v *)
! $(MAKE) clean
!
! XDatplot.ad.gz: XDatplot.ad
! nice gzip -cv XDatplot.ad > XDatplot.ad.gz
!
! xdatplot.tar.gz: distclean
! for i in $(EXCLUDE); do \
! echo $$i >>exclude; \
! done
! (cd ..; tar cXf $(VERSION)/exclude $(VERSION)/$(DISTSOURCE) $(VERSION))
! $(RM) exclude $(DISTSOURCE).gz
! nice gzip -v $(DISTSOURCE)
!
! dist: distclean COPYING README binaries XDatplot.ad.gz xdatplot.tar.gz help.tar.gz
! $(RM) -rf dist
! mkdir dist
! $(MV) $(BINDIST) XDatplot.ad.gz $(DISTSOURCE).gz $(DISTHELPDIR) $(DISTHELPDIR).tar.gz dist
! $(CP) README COPYING dist
! mkdir dist/Data; (cd Data; tar cf - .) | (cd dist/Data; tar xf -)
! (cd dist; $(LN) $(DISTHELPDIR) xdatplot_help)
! (cd dist; $(LN) $(DISTHELPDIR).tar.gz xdatplot_help.tar.gz)
Imakefile: Imakefile.in config.status
$(SHELL) config.status
*** xdatplot-0.2/Imakefile.in Sun Mar 27 12:10:56 1994
--- xdatplot-0.2.1/Imakefile.in Mon Mar 28 12:38:06 1994
***************
*** 73,78 ****
--- 73,87 ----
@bindir_is_where@
+ BINDIST = SunOS4.1.3_binaries
+ VERSION:sh = echo $PWD | sed -e 's/^.*\/\([^\/]*\)$/\1/'
+ DISTHELPDIR = $(VERSION)_help
+ DISTSOURCE = $(VERSION).tar
+ EXCLUDE = $(BINDIST) $(PROGRAMS) \
+ $(DISTHELPDIR) $(DISTHELPDIR).tar $(DISTHELPDIR).tar.gz \
+ $(DISTSOURCE) $(DISTSOURCE).gz \
+ dist exclude
+
SRCS1 = xdatplot.c files.c mainw.c fildialog.c control.c \
plot.c help.c marks.c mif.c ps.c conversion.c filter.c \
units.c xdp.c peaks.c Vt.c run.c
***************
*** 82,91 ****
all:: $(PROGRAMS)
- distclean: clean
- $(RM) $(PROGRAMS) file2c
- (cd help; $(RM_CMD) "#"*)
-
CleanTarget()
InstallMultiple($(PROGRAMS) $(SCRIPTS), $(BINDIR))
--- 91,96 ----
***************
*** 104,113 ****
MakeDir($(DESTDIR)$(XAPPLOADDIR))
$(INSTALL) $(INSTAPPFLAGS) XDatplot.ad $(DESTDIR)$(XAPPLOADDIR)/XDatplot
! /*
! Makefile:: Imakefile
! (cd $(srcdir); xmkmf -a)
! */
Imakefile: Imakefile.in config.status
$(SHELL) config.status
--- 109,156 ----
MakeDir($(DESTDIR)$(XAPPLOADDIR))
$(INSTALL) $(INSTAPPFLAGS) XDatplot.ad $(DESTDIR)$(XAPPLOADDIR)/XDatplot
! distclean: clean
! $(RM) $(PROGRAMS) file2c
! (cd help; $(RM_CMD) "#"*)
!
! realclean: distclean
! $(RM) -rf $(EXCLUDE) *.tar *.tar.gz
!
! help.tar.gz: distclean
! mkdir $(VERSION)_help
! (cd help; tar cf - *) | (cd $(VERSION)_help; tar xf -)
! tar cf $(VERSION)_help.tar $(VERSION)_help
! nice gzip -v $(VERSION)_help.tar
!
! binaries: distclean
! $(MAKE) CDEBUGFLAGS=-O2 BINDING=-static $(PROGRAMS)
! strip $(PROGRAMS)
! $(RM) -rf $(BINDIST)
! mkdir $(BINDIST)
! $(MV) $(PROGRAMS) $(BINDIST)
! $(CP) $(SCRIPTS) $(BINDIST)
! (cd $(BINDIST); nice gzip -v *)
! $(MAKE) clean
!
! XDatplot.ad.gz: XDatplot.ad
! nice gzip -cv XDatplot.ad > XDatplot.ad.gz
!
! xdatplot.tar.gz: distclean
! for i in $(EXCLUDE); do \
! echo $$i >>exclude; \
! done
! (cd ..; tar cXf $(VERSION)/exclude $(VERSION)/$(DISTSOURCE) $(VERSION))
! $(RM) exclude $(DISTSOURCE).gz
! nice gzip -v $(DISTSOURCE)
!
! dist: distclean COPYING README binaries XDatplot.ad.gz xdatplot.tar.gz help.tar.gz
! $(RM) -rf dist
! mkdir dist
! $(MV) $(BINDIST) XDatplot.ad.gz $(DISTSOURCE).gz $(DISTHELPDIR) $(DISTHELPDIR).tar.gz dist
! $(CP) README COPYING dist
! mkdir dist/Data; (cd Data; tar cf - .) | (cd dist/Data; tar xf -)
! (cd dist; $(LN) $(DISTHELPDIR) xdatplot_help)
! (cd dist; $(LN) $(DISTHELPDIR).tar.gz xdatplot_help.tar.gz)
Imakefile: Imakefile.in config.status
$(SHELL) config.status
*** xdatplot-0.2/Makefile Sun Mar 27 12:35:34 1994
--- xdatplot-0.2.1/Makefile Mon Mar 28 12:27:59 1994
***************
*** 16,22 ****
# $RCSfile: Imake.tmpl,v $ $Revision: 1.4.2.5 $ $Date: 1992/04/03 19:45:35 $
# -------------------------------------------------------------------------
! # Makefile generated from "Imake.tmpl" and </tmp/IIf.a08333>
# $XConsortium: Imake.tmpl,v 1.139 91/09/16 08:52:48 rws Exp $
#
# Platform-specific parameters may be set in the appropriate <vendor>.cf
--- 16,22 ----
# $RCSfile: Imake.tmpl,v $ $Revision: 1.4.2.5 $ $Date: 1992/04/03 19:45:35 $
# -------------------------------------------------------------------------
! # Makefile generated from "Imake.tmpl" and </tmp/IIf.a19609>
# $XConsortium: Imake.tmpl,v 1.139 91/09/16 08:52:48 rws Exp $
#
# Platform-specific parameters may be set in the appropriate <vendor>.cf
***************
*** 422,427 ****
--- 422,436 ----
BINDIR = /usr/local/bin
+ BINDIST = SunOS4.1.3_binaries
+ VERSION:sh = echo $PWD | sed -e 's/^.*\/\([^\/]*\)$/\1/'
+ DISTHELPDIR = $(VERSION)_help
+ DISTSOURCE = $(VERSION).tar
+ EXCLUDE = $(BINDIST) $(PROGRAMS) \
+ $(DISTHELPDIR) $(DISTHELPDIR).tar $(DISTHELPDIR).tar.gz \
+ $(DISTSOURCE) $(DISTSOURCE).gz \
+ dist exclude
+
SRCS1 = xdatplot.c files.c mainw.c fildialog.c control.c \
plot.c help.c marks.c mif.c ps.c conversion.c filter.c \
units.c xdp.c peaks.c Vt.c run.c
***************
*** 431,440 ****
all:: $(PROGRAMS)
- distclean: clean
- $(RM) $(PROGRAMS) file2c
- (cd help; $(RM_CMD) "#"*)
-
clean::
$(RM_CMD) "#"*
--- 440,445 ----
***************
*** 504,509 ****
--- 509,557 ----
@if [ -d $(DESTDIR)$(XAPPLOADDIR) ]; then set +x; \
else (set -x; $(MKDIRHIER) $(DESTDIR)$(XAPPLOADDIR)); fi
$(INSTALL) $(INSTAPPFLAGS) XDatplot.ad $(DESTDIR)$(XAPPLOADDIR)/XDatplot
+
+ distclean: clean
+ $(RM) $(PROGRAMS) file2c
+ (cd help; $(RM_CMD) "#"*)
+
+ realclean: distclean
+ $(RM) -rf $(EXCLUDE) *.tar *.tar.gz
+
+ help.tar.gz: distclean
+ mkdir $(VERSION)_help
+ (cd help; tar cf - *) | (cd $(VERSION)_help; tar xf -)
+ tar cf $(VERSION)_help.tar $(VERSION)_help
+ nice gzip -v $(VERSION)_help.tar
+
+ binaries: distclean
+ $(MAKE) CDEBUGFLAGS=-O2 BINDING=-static $(PROGRAMS)
+ strip $(PROGRAMS)
+ $(RM) -rf $(BINDIST)
+ mkdir $(BINDIST)
+ $(MV) $(PROGRAMS) $(BINDIST)
+ $(CP) $(SCRIPTS) $(BINDIST)
+ (cd $(BINDIST); nice gzip -v *)
+ $(MAKE) clean
+
+ XDatplot.ad.gz: XDatplot.ad
+ nice gzip -cv XDatplot.ad > XDatplot.ad.gz
+
+ xdatplot.tar.gz: distclean
+ for i in $(EXCLUDE); do \
+ echo $$i >>exclude; \
+ done
+ (cd ..; tar cXf $(VERSION)/exclude $(VERSION)/$(DISTSOURCE) $(VERSION))
+ $(RM) exclude
+ nice gzip -v $(DISTSOURCE)
+
+ dist: distclean COPYING README binaries XDatplot.ad.gz xdatplot.tar.gz help.tar.gz
+ $(RM) -rf dist
+ mkdir dist
+ $(MV) $(BINDIST) XDatplot.ad.gz $(DISTSOURCE).gz $(DISTHELPDIR) $(DISTHELPDIR).tar.gz dist
+ $(CP) README COPYING dist
+ mkdir dist/Data; (cd Data; tar cf - .) | (cd dist/Data; tar xf -)
+ (cd dist; $(LN) $(DISTHELPDIR) xdatplot_help)
+ (cd dist; $(LN) $(DISTHELPDIR).tar.gz xdatplot_help.tar.gz)
Imakefile: Imakefile.in config.status
$(SHELL) config.status
*** xdatplot-0.2/README Mon Mar 28 01:40:01 1994
--- xdatplot-0.2.1/README Mon Mar 28 17:01:32 1994
***************
*** 86,100 ****
1. Get the file xdatplot-0.2.tar.gz by anonymous FTP to
eatworms.swmed.edu from the Software directory.
! 2. Execute the command
gunzip -c xdatplot-0.2.tar.gz | tar xvf -
to uncompress the programs. (Note: gunzip is the GNU uncompression
program. You can get source code for gzip and gunzip from GNU.)
! 3. Execute the following commands:
cd xdatplot-0.2
./configure
xmkmf -a
--- 86,104 ----
1. Get the file xdatplot-0.2.tar.gz by anonymous FTP to
eatworms.swmed.edu from the Software directory.
! 2. Get the file patch01 by anonymous FTP to eatworms.swmed.edu from
! the Software/patches directory.
+ 3. Execute the command
+
gunzip -c xdatplot-0.2.tar.gz | tar xvf -
to uncompress the programs. (Note: gunzip is the GNU uncompression
program. You can get source code for gzip and gunzip from GNU.)
! 4. Execute the following commands:
+ patch -p <patch01
cd xdatplot-0.2
./configure
xmkmf -a
*** xdatplot-0.2/filter.c Sun Mar 27 10:37:08 1994
--- xdatplot-0.2.1/filter.c Mon Mar 28 16:33:02 1994
***************
*** 389,395 ****
FILTER *fp;
TIME t;
{
- #ifdef CACHE_DF
register int i;
TIME u;
FILTER_VAL *where;
--- 389,394 ----
***************
*** 397,407 ****
TIME howmany;
TIME append;
FILTER_VAL *vp;
- #else /* CACHE_DF */
- VOLTAGE v;
- #endif /* CACHE_DF */
- #ifdef CACHE_DF
if ((t >= fp->f_cv.f_t0) && (t - fp->f_cv.f_t0 < fp->f_cv.f_n))
return(fp->f_cv.f_vals[t - fp->f_cv.f_t0]);
shift_cache(fp, t, &where, &when, &howmany, &append);
--- 396,402 ----
***************
*** 417,428 ****
fp->f_cv.f_vals[t - fp->f_cv.f_t0] :
INVALID_FILTER_VAL
);
- #else /* CACHE_DF */
- if (VEOF == (v = V(t)))
- return(INVALID_FILTER_VAL);
- else
- return((FILTER_VAL) v);
- #endif /* CACHE_DF */
}
static Bool
--- 412,417 ----
***************
*** 461,472 ****
fp->f_cv.f_t0 = df_info.V_tlo;
fp->f_cv.f_n = 0;
fp->f_cv.f_sp = 1;
- #ifdef CACHE_DF
if (NULL == fp->f_cv.f_vals) {
fp->f_cv.f_vals = (FILTER_VAL *) ealloc(DF_BUFSIZ * sizeof(FILTER_VAL));
fp->f_cv.f_nv = DF_BUFSIZ;
}
- #endif /* CACHE_DF */
return(FALSE);
}
--- 450,459 ----
*** xdatplot-0.2/xdatplot.c Sun Mar 27 12:22:00 1994
--- xdatplot-0.2.1/xdatplot.c Mon Mar 28 16:09:21 1994
***************
*** 33,43 ****
--- 33,45 ----
#define BELLVOL (100) /* bell volume */
#ifdef __STDC__
+ static void dup_strings(void);
static void usage(void);
static void PU_error_cb(Widget, String, XmAnyCallbackStruct *);
static void PU_help_cb(Widget, String, XmAnyCallbackStruct *);
static void ask_user_cb(Widget, ANSWER *, XmAnyCallbackStruct *);
#else __STDC__
+ static void dup_strings();
static void usage();
static void PU_error_cb();
static void PU_help_cb();
***************
*** 161,175 ****
"lpr"
},
{
- "helpPrintCommand",
- "HelpPrintCommand",
- XmRString,
- sizeof(String),
- XtOffsetOf(AppData, help_print_cmd),
- XmRString,
- "lpr"
- },
- {
"helpViewer",
"HelpViewer",
XmRString,
--- 163,168 ----
***************
*** 638,644 ****
""
}
};
- Bool free_res[XtNumber(resources)];
int num_app_resources = XtNumber(resources);
#include "xdatplot.xbm"
--- 631,636 ----
***************
*** 701,707 ****
XtNumber(resources),
NULL);
Free(res_list);
- bzero(free_res, sizeof(free_res));
debug = app_data.debug;
STARTUP;
if (debug) {
--- 693,698 ----
***************
*** 709,714 ****
--- 700,706 ----
}
if (1 == argc) DATA_FILE = argv[0];
if (1 < argc) usage();
+ dup_strings();
inactivate_filter(&DF_FIL);
create_main_window(toplevel);
new_file(app_data.data_file);
***************
*** 715,720 ****
--- 707,732 ----
XtRealizeWidget(toplevel);
XtAppMainLoop(app);
exit_program();
+ }
+
+ /*
+ * Duplicate all string resources in heap space, so they can be freed.
+ */
+ static void
+ dup_strings()
+ {
+ register int i;
+ caddr_t addr;
+ String *sp;
+
+ for(i=0; i<num_app_resources; i++) {
+ if (0 == strcmp(resources[i].resource_type, XmRString)) {
+ addr = (caddr_t) &app_data;
+ addr += resources[i].resource_offset;
+ sp = (String *) addr;
+ if (NULL != *sp) *sp = XtNewString(*sp);
+ }
+ }
}
/* usage -- complain about incorrect command line */
*** xdatplot-0.2/xdatplot.h Sun Mar 27 12:22:17 1994
--- xdatplot-0.2.1/xdatplot.h Mon Mar 28 16:09:24 1994
***************
*** 180,186 ****
int xd_bufsiz;
Cardinal print_limit; /* max number points to print */
String print_cmd; /* for printing plots */
- String help_print_cmd; /* for printing help */
String help_viewer; /* for reading help files */
String help_URL; /* where to find them */
int help_pid; /* Mosaic process pid */
--- 180,185 ----
***************
*** 592,598 ****
*/
extern AppData app_data; /* application defaults */
#define PRINT_CMD (app_data.print_cmd)
- #define HELP_PRINT_CMD (app_data.help_print_cmd)
#define T_UNITS (app_data.t_units)
#define T_TICS (app_data.t_tics)
#define T_GAIN (app_data.t_gain)
--- 591,596 ----
*** xdatplot-0.2/xdp.c Sun Mar 27 12:34:35 1994
--- xdatplot-0.2.1/xdp.c Mon Mar 28 15:45:05 1994
***************
*** 227,235 ****
to.size = appres[i].resource_size;
type = appres[i].resource_type;
if (0 == strcmp(type, XtRString)) {
! if (free_res[i]) Nfree(*((String *) to.addr));
*((String *) to.addr) = XtNewString(val);
- free_res[i] = True;
ret = FALSE;
}
else {
--- 227,234 ----
to.size = appres[i].resource_size;
type = appres[i].resource_type;
if (0 == strcmp(type, XtRString)) {
! Nfree(*((String *) to.addr));
*((String *) to.addr) = XtNewString(val);
ret = FALSE;
}
else {
*** xdatplot-0.2/help/accbin.html Mon Mar 28 01:07:09 1994
--- xdatplot-0.2.1/help/accbin.html Mon Mar 28 08:58:59 1994
***************
*** 27,33 ****
<LI> <B>The channel settings.</B> (offset 61) This
is a group of nine sets of four four-byte floating point numbers. (for
! a total of 144 numbers, 576 bytes) These are nine sets of amplifier
settings for nine potential channels. The four numbers for each
channel are (in order): the high limit and low limit of the amplifier,
and the multiplier and offset for the data. Xdatplot currently uses
--- 27,33 ----
<LI> <B>The channel settings.</B> (offset 61) This
is a group of nine sets of four four-byte floating point numbers. (for
! a total of 36 numbers, 144 bytes) These are nine sets of amplifier
settings for nine potential channels. The four numbers for each
channel are (in order): the high limit and low limit of the amplifier,
and the multiplier and offset for the data. Xdatplot currently uses
***************
*** 34,39 ****
--- 34,42 ----
only the multiplier to convert the binary data into output by
multiplying the binary numbers in the file by the multiplier of the
first channel. <P>
+
+
+ <LI> <B>Reserved.</B> (offset 205) 432 bytes.
<LI> <B>The sampling clock frequency.</B> (offset 637) This is a
*** xdatplot-0.2/help/installation.html Sun Mar 27 19:05:13 1994
--- xdatplot-0.2.1/help/installation.html Mon Mar 28 16:59:23 1994
***************
*** 60,65 ****
--- 60,69 ----
<LI> Get <A HREF="file://eatworms.swmed.edu/Software/xdatplot-0.2.tar.gz">this file</A> and
call it xdatplot-0.2.tar.gz.
+ <LI> Get <A
+ HREF="file://eatworms.swmed.edu/Software/patches/patch01">this
+ file</A> and call it patch01.
+
<LI> Execute the command <KBD>gunzip -c xdatplot-0.2.tar.gz | tar xvf
-</KBD> to uncompress the programs. (Note: gunzip is the GNU
uncompression program. You can get source code for gzip and gunzip
***************
*** 67,72 ****
--- 71,77 ----
<LI> Execute the following commands:
<PRE>
+ patch -p <patch01
cd xdatplot-0.2
./configure
xmkmf -a
***************
*** 95,101 ****
<LI> The help tree is in the directory xdatplot-0.2/help. If you wish
to install local help (and there's every reason to do it), point the
! <A HREF="customization.html#USEFUL">XDatplot*helpURL</A> resource at "file://localhost/<CITE>path</CITE>/xdatplot-0.2/help/index.html".
</OL>
--- 100,107 ----
<LI> The help tree is in the directory xdatplot-0.2/help. If you wish
to install local help (and there's every reason to do it), point the
! <A HREF="customization.html#USEFUL">XDatplot*helpURL</A> resource at
! "file://localhost/<CITE>path</CITE>/xdatplot-0.2/help/index.html".
</OL>
***************
*** 123,131 ****
HREF="file://eatworms.swmed.edu/Software/xdatplot_help.tar.gz">this
file</A> as xdatplot_help.tar.gz, say "<KBD>gunzip -c
xdatplot_help.tar.gz | tar xvf -</KBD>", which will create a directory
! called help, then point the <A
HREF="customization.html#USEFUL">XDatplot*helpURL</A> resource at
! "file://localhost/<CITE>path</CITE>/xdatplot-0.2/help/index.html".
<P>
<A HREF="file://eatworms.swmed.edu/Software/Data">There are a few
--- 129,137 ----
HREF="file://eatworms.swmed.edu/Software/xdatplot_help.tar.gz">this
file</A> as xdatplot_help.tar.gz, say "<KBD>gunzip -c
xdatplot_help.tar.gz | tar xvf -</KBD>", which will create a directory
! called xdatplot-0.3_help, then point the <A
HREF="customization.html#USEFUL">XDatplot*helpURL</A> resource at
! "file://localhost/<CITE>path</CITE>/xdatplot-0.3_help/index.html".
<P>
<A HREF="file://eatworms.swmed.edu/Software/Data">There are a few