Table of Contents


DMXGetScreenAttributes - determine back-end screen attributes


#include <X11/extensions/dmxext.h>

Bool DMXGetScreenAttributes(Display *dpy,
                            int screen,
                            DMXScreenAttributes *attr);


DMXGetScreenAttributes() returns the attributes for the single DMX screen specified in screen.

The DMXScreenAttributes structure is:

typedef struct {
    char         *displayName;
    int          logicalScreen;
    unsigned int screenWindowWidth;
    unsigned int screenWindowHeight;
    int          screenWindowXoffset;
    int          screenWindowYoffset;
    unsigned int rootWindowWidth;
    unsigned int rootWindowHeight;
    int          rootWindowXoffset;
    int          rootWindowYoffset;
    int          rootWindowXorigin;
    int          rootWindowYorigin;
} DMXScreenAttributes;

displayName is the name used to open the display, either from the Xdmx(1) command-line or from the configuration file.

logicalScreen is the value of the screen that that Xdmx(1) server exports to clients. When Xinerama is in use, this value is typically 0 for all values of physicalScreen. If Xinerama is in use, rootWindowXorigin and rootWindowYorigin specify where the physical screen is positioned in the global Xinerama coordinate system. Otherwise, these values are set to 0.

screenWindowWidth, screenWindowHeight, screenWindowXoffset, and screenWindowYoffset are a geometry specification (see X(7x) ) for the location of the DMX screen on the back-end screen. The coordinant system of the back-end display is used for these values.

rootWindowWidth, rootWindowHeight, rootWindowXoffset, and rootWindowYoffset are a geometry specification (see X(7x) ) for the location of the root window on the screen window. The coordinant system of the screen window is used. In most cases, the root window will have the same geometry as the DMX screen window, and will occupy the same area of the back-end display. (This would not be the case, for example, if automatic projector alignment is used.)

Return Value

DMXGetScreenAttributes() returns True unless there is a protocol error.

DMXGetScreenAttributes() can generate BadValue errors.

See Also

DMXGetScreenCount(3X) , DMXChangeScreenAttributes(3X) , DMX(3X) , Xdmx(1)

Table of Contents