% AMS-style Sans Serif Math Symbols A 7 pt
% Based on msam7.mf by the American Mathematical Society
% and on fonts by Donald Knuth and John Sauter
% By Ariel Barton, 2013/4/12
if unknown sansfontbase: input sansfontbase fi
font_identifier:="SSMSAM"; font_size 7pt#;
u#:=15.5/36pt#; % sautercmssi7 % unit width
width_adj#:=11/36pt#; % sautercmssi7 % width adjustment for certain characters
serif_fit#:=-5.5/36pt#; % sautercmssi7 % extra sidebar near lowercase serifs
cap_serif_fit#:=-8/36pt#; % sautercmssi7 % extra sidebar near uppercase serifs
letter_fit#:=0pt#; % sautercmssi7 % extra space added to all sidebars
body_height#:=189/36pt#; % sautercmssi7 % height of tallest characters
asc_height#:=175/36pt#; % sautercmssi7 % height of lowercase ascenders
cap_height#:=175/36pt#; % sautercmssi7 % height of caps
fig_height#:=166/36pt#; % sautercmssi7 % height of numerals
x_height#:=112/36pt#; % sautercmssi7 % height of lowercase without ascenders
math_axis#:=63/36pt#; % sautercmssi7 % axis of symmetry for math symbols
bar_height#:=55/36pt#; % sautercmssi7 % height of crossbar in lowercase e
comma_depth#:=33/36pt#; % sautercmssi7 % depth of comma below baseline
desc_depth#:=49/36pt#; % sautercmssi7 % depth of lowercase descenders
crisp#:=0pt#; % msam10 % diameter of serif corners
tiny#:=0pt#; % sautercmssi7 % diameter of rounded corners
fine#:=0pt#; % sautercmssi7 % diameter of sharply rounded corners
thin_join#:=14/36pt#; % sautercmssi7 % width of extrafine details
hair#:=23/36pt#; % sautercmssi7 % lowercase hairline breadth
stem#:=23/36pt#; % sautercmssi7 % lowercase stem breadth
curve#:=23/36pt#; % sautercmssi7 % lowercase curve breadth
ess#:=23/36pt#; % sautercmssi7 % breadth in middle of lowercase s
flare#:=20/36pt#; % sautercmssi7 % diameter of bulbs or breadth of terminals
dot_size#:=24/36pt#; % sautercmssi7 % diameter of dots
cap_hair#:=23/36pt#; % sautercmssi7 % uppercase hairline breadth
cap_stem#:=27/36pt#; % sautercmssi7 % uppercase stem breadth
cap_curve#:=27/36pt#; % sautercmssi7 % uppercase curve breadth
cap_ess#:=25/36pt#; % sautercmssi7 % breadth in middle of uppercase s
rule_thickness#:=12.24/36pt#; % sautercmssi7 % thickness of lines in math symbols
dish#:=0pt#; % sautercmssi7 % amount erased at top or bottom of serifs
bracket#:=0pt#; % sautercmssi7 % vertical distance from serif base to tangent
jut#:=0pt#; % sautercmssi7 % protrusion of lowercase serifs
cap_jut#:=0pt#; % sautercmssi7 % protrusion of uppercase serifs
beak_jut#:=0pt#; % sautercmssi7 % horizontal protrusion of beak serifs
beak#:=0.3/36pt#; % sautercmssi7 % vertical protrusion of beak serifs
vair#:=17/36pt#; % sautercmssi7 % vertical diameter of hairlines
notch_cut#:=15/36pt#; % sautercmssi7 % maximum breadth above or below notches
bar#:=16/36pt#; % sautercmssi7 % lowercase bar thickness
slab#:=18/36pt#; % sautercmssi7 % serif and arm thickness
cap_bar#:=17/36pt#; % sautercmssi7 % uppercase bar thickness
cap_band#:=15/36pt#; % sautercmssi7 % uppercase thickness above/below lobes
cap_notch_cut#:=20/36pt#; % sautercmssi7 % max breadth above/below uppercase notches
serif_drop#:=2/36pt#; % sautercmssi7 % vertical drop of sloped serifs
stem_corr#:=1/36pt#; % sautercmssi7 % for small refinements of stem breadth
vair_corr#:=1/36pt#; % sautercmssi7 % for small refinements of hairline height
apex_corr#:=3.5/36pt#; % sautercmssi7 % extra width at diagonal junctions
o#:=5/36pt#; % sautercmssi7 % amount of overshoot for curves
apex_o#:=0pt#; % sautercmssi7 % amount of overshoot for diagonal junctions
slant:=0; % msam10 % tilt ratio $(\Delta x/\Delta y)$
fudge:=0.91; % sautercmssi7 % factor applied to weights of heavy characters
math_spread:=0.6; % sautercmssi7 % extra openness of math symbols
superness:=0.7071; % sautercmssi7 % parameter for superellipses
superpull:=0.05; % sautercmssi7 % extra openness inside bowls
beak_darkness:=0; % sautercmssi7 % fraction of triangle inside beak serifs
ligs:=2; % cmmi7 % level of ligatures to be included
square_dots:=true; % sautercmssi7 % should dots be square?
hefty:=true; % sautercmssi7 % should we try hard not to be overweight?
serifs:=false; % sautercmssi7 % should serifs and bulbs be attached?
monospace:=false; % sautercmssi7 % should all characters have the same width?
variant_g:=false; % sautercmssi7 % should an italic-style g be used?
low_asterisk:=false; % sautercmssi7 % should the asterisk be centered at the axis?
math_fitting:=true; % cmmi7 % should math-mode spacing be used?
bigdw#:=3/36pt#; % cmmi7% Adjusted dw for unusually wide strokes
% the following font parameters are explained in {\sl The \TeX book}, Appendix G
subs:=5/7; % subscripts to 7pt will normally be in 5pt type
rth#:=.4pt#; % assume that rules will come from cmex10
fontdimen 8: % parameters $\sigma_8$ through $\sigma_{22}$ will now be listed
math_axis#+3.51rth#+36/36pt#+subs*desc_depth#, % num1
math_axis#+1.51rth#+12/36pt#, % num2
math_axis#+1.51rth#+34/36pt#, % num3
-(math_axis#-3.51rth#-subs*fig_height#-86/36pt#), % denom1
-(math_axis#-1.51rth#-subs*fig_height#-12/36pt#), % denom2
6.99pt#-subs*asc_height#, % sup1
6.49pt#-subs*asc_height#, % sup2
72/36pt#, % sup3
36/36pt#, % sub1
72/36pt#, % sub2
subs*asc_height#-36/36pt#, % sup_drop
18/36pt#, % sub_drop
11.9pt#, % delim1
8.1pt#, % delim2
math_axis#; % axis_height
%% include these parameters to shrink R and S so they
%% fit inside a circle
%
lower.u#:=11.51/36pt#; % eczi0700 % unit width
lower.width_adj#:=8/36pt#; % eczi0700 % width adjustment for certain characters
lower.cap_serif_fit#:=-5.74/36pt#;% eczi0700 % extra sidebar near uppercase serifs
lower.letter_fit#:=2/36pt#; % eczi0700 % extra space added to all sidebars
lower.body_height#:=119/36pt#; % eczi0700 % height of tallest characters
lower.cap_height#:=112.8/36pt#; % eczi0700 % height of caps
lower.x_height#:=71.7/36pt#; % eczi0700 % height of lowercase without ascenders
lower.bar_height#:=35.16/36pt#; % eczi0700 % height of crossbar in lowercase e
lower.comma_depth#:=20.91/36pt#;% eczi0700 % depth of comma below baseline
lower.flare#:=13.61/36pt#; % eczi0700 % diameter of bulbs or breadth of terminals
lower.cap_hair#:=18.33/36pt#; % eczi0700 % uppercase hairline breadth
lower.stem#:=18.74/36pt#; % eczi0700 % lowercase stem breadth
lower.cap_stem#:=20.43/36pt#; % eczi0700 % uppercase stem breadth
lower.cap_curve#:=21.27/36pt#; % eczi0700 % uppercase curve breadth
lower.cap_ess#:=17.95/36pt#; % eczi0700 % breadth in middle of uppercase s
lower.cap_jut#:=0pt#; % eczi0700 % protrusion of uppercase serifs
lower.beak_jut#:=0pt#; % eczi0700 % horizontal protrusion of beak serifs
lower.beak#:=0.21/36pt#; % eczi0700 % vertical protrusion of beak serifs
lower.slab#:=14.38/36pt#; % eczi0700 % serif and arm thickness
lower.cap_bar#:=13.59/36pt#; % eczi0700 % uppercase bar thickness
lower.cap_band#:=12/36pt#; % eczi0700 % uppercase thickness above/below lobes
lower.cap_notch_cut#:=20.36/36pt#;% eczi0700 % max breadth above/below uppercase notches
lower.o#:=1.98/36pt#; % eczi0700 % amount of overshoot for curves
lower.apex_o#:=0pt#; % eczi0700 % amount of overshoot for diagonal junctions
lower.fudge:=0.91266; % eczi0700 % factor applied to weights of heavy characters
generate sans-amsya % switch to the driver file