UKTeX Digest Friday, 28 Feb 1992 Volume 92 : Issue 08 ``The UKTeX Digest is brought to you as a free, unfunded and voluntary service of the UK TeX Users Group and the UK TeX Archive.'' Today's Topics: {Q&A}: oztex 1.4 -- possible corruption? Re: oztex 1.4 -- possible corruption? Re: The Mathematics of font design RE: Inconsistent page numbering in LaTeX with HEADERFOOTER.STY EmTeX (DVIDOT) driver for BJ10e Page Numbering and TOC RE: Unusual sizes (PK files) Unusual sizes (PK files) Tex for PCs A3 postscript. Re: Machine dependence of format file {Announcements}: HARVARD family of bibliographic styles on FILESERV dcolumn.sty announcement -- correction and apologies New version of DVIDVI for VMS on FILESERV {Archive News}: XY-pic version 2.5 in UK TeX Archive harvard bibliography styles in UK TeX Archive Re: modes.mf 0.9 in UK TeX Archive Administrivia: Moderators: Peter Abbott (Aston University) and David Osborne (University of Nottingham) Contributions: UKTeX@uk.ac.tex Administration, subscription and unsubscription requests: UKTeX-request@uk.ac.tex ------------------------------------------------------------ Date: Tue, 25 Feb 92 13:20:00 +0000 From: Stephen Miller Subject: oztex 1.4 -- possible corruption? I've just ftp'ed OzTeX 1.4 (the reduced version) out of the archive and using StuffIt to decode the hqx's it reported errors : on Formats and Inputs (I didn't then go on and see if OzTeX was okay) and on Read-Me. Has anyone else reported problems? Thanks stephen miller oucs ------------------------------ Date: Tue, 25 Feb 92 15:50:29 +0000 From: P.Abbott@uk.ac.aston Subject: Re: oztex 1.4 -- possible corruption? >I've just ftp'ed OzTeX 1.4 (the reduced version) out of the archive and >using StuffIt to decode the hqx's it reported errors : on Formats and Inputs >(I didn't then go on and see if OzTeX was okay) and on Read-Me. > >Has anyone else reported problems? Yes the problem has just been reported from Cambridge. I have de binhexed the file on my Mac and that is OK. As soon as the FTP service is back again I will retransmit. Peter Tel 44 (0)21 359 5492 direct FAX 44 (0)21 359 6158 ------------------------------ Date: Tue, 25 Feb 92 14:29:30 +0000 From: sw@uk.co.network-analysis-ltd Subject: Re: The Mathematics of font design > I am attempting to write a project on the 'Mathematics of font > design' but am rather stuck. I have looked for journals, > conferences and research papers on this subject (fonts, font > design, bezier curves etc.) but have drawn a blank You could start with Raster imaging and digital typography Proceedings of the International Conference Ecole Polytechnique Federale Lausanne, Oct 1989 Ed. Jacques Andre and Roger Hersch Pub. Cambridge University Press ISBN 0 521 37490 1 Sak Wathanasin Network Analysis Limited uucp: ...!uknet!nan!sw other: sw@network-analysis-ltd.co.uk phone: (+44) 203 419996 snail: 178 Wainbody Ave South, Coventry CV3 6BX, UK ------------------------------ Date: Tue, 25 Feb 92 08:37:00 -0600 From: George D. Greenwade"George D. Greenwade" Subject: RE: Inconsistent page numbering in LaTeX with HEADERFOOTER.STY In UKTeX Digest V92 #07 (Tue, 25 Feb 92 11:33:44 GMT), XRASIMMIE%ie.ucg.bodkin@uk.ac.earn-relay posted: >Using Gildea's headerfooter.sty with >\documentstyle[a4,headerfooter,makeidx]{book} >and > \pageheader{Page \thepage}{}{Chapter \thechapter} > \pagefooter{}{}{} > \pageheaderlinetrue >Then all pages except the first ones (of each chapter, appendix and index) >are correctly labelled ... >But the first pages have a centered pagenumber footer ... >Is there a global fix? or does each first page have to be disabled somehow? > >PS \pagestyle{empty} in the preamble doesn't work My first assumption here is that you are using \chapter, \appendix, etc., for major sectioning. If so, LaTeX uses \thispagestyle{plain} on those pages. I believe (note: this is only a belief and not tested!) that \thispagestyle{empty} immediately following the major sectioning command, without a following blank line, will take care of the problem, similar to the processing and behavior of \maketitle. This, however, is not the point of my post. Instead of using headerfooter.sty, I would *strongly* suggest the use of Piet van Oostrum's FANCYHEADINGS.STY, which allows you to define "plain" page behavior in any way you choose, as well as special handling of odd and even headers, header and footer line inclusion and size, and a few other very nice items. For short documents, headerfooter and fancyheadings are essentially interchangable; for long documents, fancyheadings is far superior in that it handles some of the things you might overlook. For example, if you want the same heading (*exactly* the same heading) on every page, your: >\documentstyle[a4,headerfooter,makeidx]{book} > \pageheader{Page \thepage}{}{Chapter \thechapter} > \pagefooter{}{}{} > \pageheaderlinetrue can be converted to: \documentstyle[a4,fancyheadings,makeidx]{book} \lhead\fancyplain{Page \thepage}{Page \thepage} \chead\fancyplain{}{} \rhead\fancyplain{Chapter \thechapter}{Chapter \thechapter} \lfoot\fancyplain{}{} \cfoot\fancyplain{}{} \rfoot\fancyplain{}{} \pagestyle{fancyplain} If you want truly empty {plain} pages, make the first argument in the \Xhead and \Xfoot arguments null (i.e.,\lhead\fancyplain{}{Page \thepage}). Defaults rules are: % \headrulewidth 0.4pt % \footrulewidth 0pt % \plainheadrulewidth 0pt % \plainfootrulewidth 0pt so these, too, can be changed to suit your personal needs and preferences. For different twoside behavior (i.e., odd vs. even differences in headers and footers, as well as supported differences in fancy vs. plain pages), additional arguments (up to a total of 6) can be passed to the \Xhead and \Xfoot definitions. Fancyheadings also supports multiple lines in both the headings and footers quite gracefully (I have a few standard documents which require 12 line headers, which are processed nicely). If you're going to do a large project (I define "large" in this context to mean "any document where major sectioning commands are included which define differences in underlying \thispagestyles which make a difference in what I must produce"), fancyheadings is absolutely essential. {The fancyheadings style file is in the UK TeX Archive in [tex-archive.latex.contrib]fancyheadings.sty, with a description of its use in a file the same directory, fancyheadings-doc.txt --Ed.} Regards, George %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% George D. Greenwade, Ph.D. Bitnet: BED_GDG@SHSU Department of Economics and Business Analysis THEnet: SHSU::BED_GDG College of Business Administration Voice: (409) 294-1266 P. O. Box 2118 FAX: (409) 294-3612 Sam Houston State University Internet: bed_gdg@SHSU.edu Huntsville, TX 77341 bed_gdg%SHSU.decnet@relay.the.net %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% ------------------------------ Date: Tue, 25 Feb 92 17:22:02 +0000 From: SYSMGR@uk.ac.kcl.ph.ipg Subject: EmTeX (DVIDOT) driver for BJ10e I sent this to UKTEX July last, but judging from Andrew McLean's letter it hasn't found its way into the archive. Its short enough to bear repetition anyway: following is a DVIDOT driver revipe for a Cannon BJ10e. Notes: I have split the INIT1 and INIT2 lines in two to keep within 80 characters. To use, I think you'll have to re-join these into one rather long line, unless there is a continuation line mechanism that I didn't notice in the MAKEDOT doc. Also, you'll want your BJ10e in mode 2 (IBM emulation). The graphics sequences used are IBM ones, and presumably there is some IBM printer for which this recipe will also work. The font libraries you need are the P6H_*.FLI. I made mine myself using MFJOB; took a few days on a 386SX, and they occupy about 6Mb. Nigel Arnot. * * BJ10e high resolution driver (derived from ibm4208m.dot ) * COMMENT=360x360 driver for BJ10e ENV_NAME=BJ10E LOG_NAME=dvidot FONT_PATH=\emtex\pixel.p6h\$rdpi PAGE_WIDTH=8in PAGE_HEIGHT=11in FORM_LENGTH= RESOLUTION=360 360 COLUMNS=2880 ONE_LINE_FEED= BLANK_WIDTH=36 METHOD=6 1 MAX_WIDTH=2880 PINS=7 0 MAX_LF=255 FF_METHOD=FF S_OPTION=SLOW * * INIT 1 resets to user defaults, may include economy mode SW1-2 ON INIT1=CAN ESC '[ 'K 1 0 4 DC2 ESC 'F ESC 'H ESC 'I 0 ESC 'T ESC 'X 1 80 ESC "[@" 4 0 0 0 17 1 ESC '_ 0 ESC '- 0 ESC '[ '\ 4 0 0 0 0x68 0x01 ESC '3 48 C R * * whereas INIT 2 resets to factory, SW1-2 OFF. INIT2=CAN ESC '[ 'K 1 0 0 DC2 ESC 'F ESC 'H ESC 'I 0 ESC 'T ESC 'X 1 80 ESC "[@" 4 0 0 0 17 1 ESC '_ 0 ESC '- 0 ESC '[ '\ 4 0 0 0 0x68 0x01 ESC '3 48 C R * * and after we are done go back to user defaults. EXIT=ESC '[ 'K 1 0 0 * GRAPH_MODE=FS 'C 'B 4 4 LH+0 GRAPH_END= LINE_FEED=FS 'C 'J 4 L+0 FORM_FEED=FF POS_X= * * The end * ------------------------------ Date: Tue, 25 Feb 92 19:36:05 +0000 From: axel kowald Subject: Page Numbering and TOC I am currently preparing a larger document using the 'report' style. I have a \tableofcontents at the beginning of the document, but wish to start my page numbering at the first page of the first chapter. To do that I have a \pagestyle{empty} right at the beginning and a \pagestyle{plain} after the \tableofcontents. Now funny things happen. The first page of my contents has a pagenumber, the following pages have not and my first chapter starts as expected with pagenumbers. Probably it is very trivial but why do I get a pagenumber at the first page of my contents ?? And how do I get rid of it ???? Thanks for any help Axel (a_kowald@uk.ac.mrc.nimr) ------------------------------ Date: Wed, 26 Feb 92 13:57:44 +0000 From: Philip Taylor (RHBNC) Subject: RE: Unusual sizes (PK files) >>> \font\ssecrm=cmb10 at 13ptb % Note the use of cmb rather than cmbx. Change all of these to the nearest \scaled form and all will be well. ** Phil. ------------------------------ Date: Wed, 26 Feb 92 13:37:54 +0000 From: P.Abbott@uk.ac.aston Subject: Unusual sizes (PK files) One of our users one a VAX VMS system has obtained TeX sources which generate the follwoing error when attempting to print. The files declare a lot of fonts Unfortunately there are several dozen lines of the form: \font\tenbf=cmb10 scaled \magstephalf \font\tentt=cmtt10 scaled \magstephalf \font\chaptt=cmtt10 scaled \magstep3 \font\chaprm=cmbx10 scaled \magstep3 \font\sectt=cmtt10 scaled \magstep2 \font\ssecrm=cmb10 at 13ptb % Note the use of cmb rather than cmbx. I thought magstep 0 is 300 1/2 329 2 360 3 432 etc. Obviously some unusual ones have been used. Does anyone know of suitable PK files or is this a case of the whole document being scaled which is upsetting the font statements? Peter clust>psprint/noban/out=cpp.ps cpp Creating SYS$SCRATCH:CPP.TMP;1 1/[1] 2/[2] 3/[1] 4/[2] 5/[3] Couldn't open font file: disk$utils:[utilities.newtex.300pk]cmb10.390pk 6/[4] Couldn't open font file: disk$utils:[utilities.newtex.300pk]cmtt10.390pk 7/[5] 8/[6] Printing aborted due to error(s). Temporary file deleted. Tel 44 (0)21 359 5492 direct FAX 44 (0)21 359 6158 ------------------------------ Date: Wed, 26 Feb 92 13:44:20 +0000 From: Dr Alan M Thompson x4153 Subject: Tex for PCs Dear System, I want to extract from the tex archive a version of TeX to run on a PC. Is what I wan't to extract EMUTEX? If so Do I need to Extract all the files in the Emutex directory? How do I go about getting the software to UnBOO and unZIP files? I would be grateful if you could advise me on these things Yours faithfully Alan M. Thompson ------------------------------ Date: Thu, 27 Feb 92 15:47:18 +0700 From: Allan Reese Subject: A3 postscript. We have a QMS 2210 A3 laser printer. The dvips document mentions switch values for A4, letter, legal and landscape sizes. I found that taking an A4 page with \magnification\magstep2 and straight print command that the full width came out, but not the full height. Adding \voffset -5truein gave the full page, filling the A3 sheet. By xerox reduction I was therefore able to create the equivalent of 600dpi resolution, and I can see the differenc e in the fonts. This is actually predicted from the PostScript documentation, as it says that edge violations are not detected, but it is a relief to see it work. I'm happy with this, but is there a less kludgy way to use an expensive piece of equipment? ------------------------------ Date: Thu, 27 Feb 92 18:07:23 +0000 From: Martyn.Johnson@uk.ac.cambridge.computer-lab Subject: Re: Machine dependence of format file In UKTeX digest V92 #07, Brian Hamilton Kelly and Mark Bush both pointed out that format files are machine dependent because they depend on native byte order. However they did not point out that even on machines of the same byte order and word length they are still not machine independent. Format files can contain floating point numbers, which have many different formats - e.g. DEC VAX is different from DEC RISC, even though both are little endian. Fortunately, most formats generally used do not cause floating point numbers to appear in the format file. But if you have a private format which defines a box in which the glue has been set, watch out! Martyn Johnson maj@cl.cam.ac.uk University of Cambridge Computer Lab Cambridge UK ------------------------------ Date: Tue, 25 Feb 92 14:54:50 -0600 From: George D. Greenwade"George D. Greenwade" Subject: HARVARD family of bibliographic styles on FILESERV Peter Williams has patiently worked with me as I have gotten his HARVARD family of bibliographic styles arranged as a package for FILESERV/Niord. While these meet the specific needs of the bibliographic styles indicated, his extension of \citeasnoun in HARVARD.STY which is passed along for processing in BeaST language is interesting and quite useful. The HARVARD.TEX and HARVARD.BIB files provides excellent documentation for this family of new files, which are consistent with BibTeX 0.99a or later. Attached is the description file FILESERV will maintain for this package. I extend my thanks to Peter for his efforts. - --George HARVARD ------- The HARVARD package includes the 6 files of Peter Williams' Harvard family of bibliographic styles. There are two primary forms of citation in the Harvard style, dependent upon whether the reference is used as a noun or parenthetically. To facilitate using a citation as a noun a new command \citeasnoun has been created which has the same syntax as the \cite command except that multiple citations are not permitted. Additionally, where there are more than two authors, all authors are listed in the first citation and in subsequent citations just the first author's name followed by `et al.' is used. Where appropriate, citations are abbreviated automatically after the first reference when bibliographies are produced by BibTeX. Provision is also made for this feature to be accessed during manual coding. There are three bibliography styles currently available within the Harvard family, AGSM (which is based on "Style Manual for authors editors and printers of Australian government publications"), DCU (which is based upon the conventions in use in the Design Computing Unit, Department of Architectural and Design Science, University of Sydney), and KLUWER (which aspires to conform to the requirements of Kluwer Academic Publishers). They are invoked by the \bibliographystyle within LaTeX and effect the layout of the entries in the bibliography. You may retrive the entire package of six files by including the command: SENDME HARVARD in the body of a mail message to FILESERV@SHSU.BITNET (FILESERV@SHSU.edu). If, for some reason, you should only need one file, say, HARVARD.DCU_STY, include the command: SENDME HARVARD.DCU_STY in your request to FILESERV. These files are available for anonymous ftp retrieval from Niord.SHSU.edu (192.92.115.8) in the directory [.HARVARD]. Files in this package: (1 Block = 512 bytes) File Blocks Save file as: - ----------------------------------------------------------------------------- HARVARD.AGSM_BST 46 AGSM.BST HARVARD.DCU_BST 46 DCU.BST HARVARD.HARVARD_BIB 2 HARVARD.BIB HARVARD.HARVARD_STY 6 HARVARD.STY HARVARD.HARVARD_TEX 13 HARVARD.TEX HARVARD.KLUWER_BST 46 KLUWER.BST Approximate total blocks in full HARVARD package = 159 ------------------------------ Date: Tue, 25 Feb 92 17:04:02 -0600 From: George D. Greenwade"George D. Greenwade" Subject: dcolumn.sty announcement -- correction and apologies In <009567CB.8D770FA0.9837@SHSU.edu> (Fri, 21 Feb 1992 11:45:45 CST), I posted an announcement about David Carlisle's dcolumn.sty. In it, I said: > If you need ... or [c] the doc.sty file from > Frank Mittelbach and Rainer Schoepf's multicol package (needed to create > the documentation for all of the above), include the respective commands > shown below on unique lines of your mail message to FILESERV: > ... > SENDME MULTICOL.DOC_STY Piet van Oostrum properly pointed out in article <1992Feb24.133618.19179@cs.ruu.nl> posted to comp.text.tex (and on to ctt-Digest) on 24 Feb 92 13:36:18 GMT: > The doc.sty forbids distribution of itself outside of the complete multicol > package. And subsequently, David posted to me in a private note: > I thought of [only retrieving the DOC.STY file alone], but unfortunately > doc.sty unconditionally inputs multicol.sty, this is for the index. My > files do not produce an index, as distributed, and every page only has one > column, but there on line 329, we have \input{multicol.sty}, so people need > the whole package. perhaps the comments in the template I use for my files > should be changed to `if you have Mittelbach's MULTICOL package ...' Or we > could get FM to re-organise things so that multicolumn.sty is only input if > needed. Therefore, be it resolved: 1. The proper (and requisite) command is *not* SENDME MULTICOL.DOC_STY; it properly is SENDME MULTICOL in the body of a mail message to FILESERV@SHSU.BITNET (FILESERV@SHSU.edu); 2. I, too, know how to read and it is patently obvious in all of the files associated with MULTICOL that the package, in whole, is supposed to be distributed at one time -- I screwed up by trying to save a little bandwidth and I apologize for my ignorance; 3. I extend my sincerest apologies to both Frank and Rainer for suggesting that the single file out of any of their packages be retrieved individually -- I will never do this again; and finally, 4. I extend my sincerest apologies to anyone who retrieved only those files I identified and were unable to properly process the documentation. Might I suggest that, since an increasing number of authors are using doc.sty for documentation (a welcome movement since it is impossible to fetch a style without its documentation -- the largest cause of user error) and is a movement I personally wish was better documented for others to use, as well, that a DOC package be considered for development which is wholly independent of MULTICOL? Ideally, I guess I'm suggesting that it be capable of both including (for the use of authors) and extracting (for the use of end users) documentation. Possibly this already exists; if so, please pass it along to me or tell me where to fetch it from (with all the appropriate and requisite files 8-)). Regards and apologies once again, George ------------------------------ Date: Wed, 26 Feb 92 15:46:38 -0600 From: George D. Greenwade"George D. Greenwade" Subject: New version of DVIDVI for VMS on FILESERV Hunter Goatley brought to my attention and kindly provided me with a different version of the VMS port of DVIDVI (authored by Tony McGrath ). The new VMS_SHARE file has been installed on FILESERV/Niord for your convenience. Below is the description file for this package. My thanks are extended to Hunter for his efforts on this. - --George =========================================================================== DVIDVI ------ The DVIDVI package includes Tony McGrath's port of Tom Rokicki's DVIDVI (version 0.5) program for VMS. DVIDVI lets you manipulate DVI files, performing tricks by extracting selected pages (or a selected ordering of pages) into a new DVI file. This newer port also provides fuller functionality in that it allows a user to extract certain pages from a document. The command: dvidvi m[n] file outfile will extract n pages starting at m. This is in addition to previously supported page reversal, extraction of only odd or even pages, preparation of folded brochures, and other items. The C source, along with a DCL build file and sample are provided. This version also includes Hunter Goatley's DUPLEX.COM, for poor-man's duplex printing. This package differs from the one which has been available previously from SHSU in that it uses C extensions to do the some things which the prior version relied on RMS calls to handle. The original DVIDVI created Stream_LF files under VMS; the VMS port of DVIPS V5.47 (as well as the new DVITYPE, the latest DECUS TeX programs, etc.) expects the file to consist of fixed-length, 512-byte records. This version of DVIDVI creates such files under VMS. Since this package is is specifically a VMS port and probably of interest only to VMS users, the sources necessary to rebuild this version are in a VMS_SHARE format. You may retrieve the VMS_SHARE file by including the command: SENDME DVIDVI in the body of a mail message to FILESERV@SHSU.BITNET (FILESERV@SHSU.edu). For anonymous ftp retrieval, this file is available from Niord.SHSU.edu (192.92.115.8) in the directory [.DVIDVI]. Files in this package: (1 Block = 512 bytes) File Blocks - ----------------------------------------------------------------------------- DVIDVI.VMS_SHARE 63 Approximate total blocks in full DVIDVI package = 63 =============================================================================== NOTE: For users unfamiliar with FILESERV desiring an overview of the commands, use, and syntax of it, please include the command HELP in the body of a mail message to FILESERV@SHSU.BITNET (FILESERV@SHSU.edu) ------------------------------ Date: 25 Feb 92 11:47:41 +0000 From: spqr@uk.ac.york.minster Subject: XY-pic version 2.5 in UK TeX Archive I have put a current version of Kristoffer H. Rose's `xypic' package in the UK TeX Archive, in [tex-archive.macros.xypic] a description follows Sebastian Rahtz **** XY-pic version 2.5 has been released. It fixes the following bugs present in XY-pic version 2.4 [with thanks]: + Straight diagonal arrows are now correct even when diagonal :-). + Bend arrow bugs fixed [Jon Trowbridge]. and adds the following features: + Added (FACTOR) to \rotate to allow arbitrary rotation. + ` intermediate points now accept an optional /RADIUS argument. + Added \Tip with wide tip. You can update to the new version in either of the following ways: A) If you have XY-pic version 2.4 then a patch is available. It has been posted just after this message and is available by anonymous ftp from diku.dk [129.142.96.1] as "pub/TeX/misc/xypic-2.4to2.5.Z". B) You can retrieve the entire package by anonymous ftp from diku.dk [129.142.96.1] as described in the TRAILER below. The new version is upwards compatible with the old one except for one thing: arrows can now only be broken once (not counting arrow tipes). This is explained in the manual. Newcomers will find the TRAILER of the package below. Regards, Kristoffer ---------------------------------------------------------------------- TRAILER: -*-text-*- introducing XY-pic version 2. XY-pic is a macro package for AMS-TeX, plain TeX, LaTeX, and AMS-LaTeX for typesetting diagrams with the following characteristics: *** Specified as a matrix of entries aligned in rows and columns. *** Any entry may be connected to any other entry using arrows that are automatically rotated and stretched as required to meet their target; a variety of arrow styles may be used. *** Arrows may be decorated with labels that are `tied` to a specified point of the arrow independent of its direction. *** Special support for arrows that cross each other, arrows that `go by' other entries, combined arrows, and arrows that bend around other entries. *** Support for entries and arrows that are independent of the matrix structure. If you wish to check out the facilities before installation, and you have a 300 dpi PostScript printer, then you can print the file "xypicman.ps" that contains a formatted version of the manual. (In the distribution it is compressed into the file "xypicman.ps.Z"). Please note that XY-pic is under `copyleft' as specified by the GNU General Public License. ---------------------------------------------------------------------- XY-pic was written by Kristoffer H{\o}gsbro ROSE DIKU (TOPPS group), University of Copenhagen Universitetsparken 1, DK-2100 Copenhagen \O (+45) 31396466 - - ------- End of forwarded message ------- - ------- End of forwarded message ------- ------------------------------ Date: 26 Feb 92 15:56:44 +0000 From: spqr@uk.ac.york.minster Subject: harvard bibliography styles in UK TeX Archive Peter Williams' HARVARD family of bibliographic styles have been placed inthe UK TeX Archive in [tex-archive.latex.contrib.harvard] for the delight of all and sundry Sebastian Rahtz ------------------------------ Date: Wed, 26 Feb 92 16:50:00 +0000 From: ARCH6@uk.ac.york.vaxb Subject: Re: modes.mf 0.9 in UK TeX Archive [tex-archive.metafont.contrib]modes.mf was reported as being corrupt. I have resent it, and it seems OK now sebastian rahtz ------------------------------ UK TeX ARCHIVE at ASTON UNIVERSITY >>> UK.AC.TEX <<< *** Interactive and file transfer access *** JANET: Host: uk.ac.tex, Username: public, Password: public DTE 000020120091 Internet: host tex.ac.uk [134.151.40.18] For telnet access, login: public, password: public For anonymous ftp, login: anonymous, password: *** Mail server *** Send mail to TeXserver@uk.ac.tex (JANET) or TeXserver@tex.ac.uk (rest of the world) with message body containing the word HELP \section FILES OF INTEREST [tex-archive]00readme.txt [tex-archive]00directory.list [tex-archive]00directory.size [tex-archive]00directory_dates.list [tex-archive]00last30days.files \section DIGESTS This year's UKTeX back issues are stored in the archive in directory [tex-archive.digests.uktex.92] This year's TeXhax back issues are stored in the archive in directory [tex-archive.digests.texhax.92] Latest TeXhax: V92 #02 TeXMaG back issues are stored in the archive in directory [tex-archive.digests.tex-mag] Latest TeXMaG: V5N3 \section MEDIA DISTRIBUTIONS \subsection Washington Unix TeX distribution tape Latest copy of May/June 1991 contains: TeX 3.14, LaTeX 2.09, Metafont 2.7, plus many utilities suitable for Unix 4.2/4.3BSD & System V tar format, 1600bpi, blockfactor 20, 1 file (36Mb) Copies available on: One 2400ft 0.5" tape sent with return labels AND return postage to Aston OR One Quarter-Inch Cartridge, QIC-120 or QIC-150 format (DC600A or DC6150) sent with envelope AND stamps for return postage to Nottingham (addresses below). \subsection VMS tapes VMS backup of the archive requires three 2400ft tapes at 6250bpi. VMS backup of TeX 2.991 plus PSprint requires one 2400ft tape. \subsection Exabyte 8mm tapes Same contents available as 0.5" tapes. Following tape types available: SONY Video 8 cassette P5 90MP, MAXELL Video 8 cassette P5-90, TDK Video 8 cassette P5-90MPB \section TeX IMPLEMENTATIONS FOR SMALL COMPUTERS \subsection OzTeX V1.4 (for Macintosh) Send 7 UNFORMATTED 800K disks to Aston with return postage. \subsection emTeX (for MS-DOS) The complete package (3.5" High density disk format ONLY) is available from Aston at a cost of 15 pounds, including disks, post and packing. All other enquiries and disk formats should be directed to: Eigen PD Software, P.O. Box 722, Swindon SN2 6YB (tel: 0793-611270) (JANET e-mail address: kellett@uk.ac.cran.rmcs) \subsection TeX for the Atari ST All enquiries for disks etc. should be directed to: The South West Software Library, P.O. Box 562, Wimborne, Dorset BH21 2YD (JANET e-mail address: mdryden@uk.co.compulink.cix) \section POSTAGE RATES All prices in Pounds Sterling. For Aston orders, make cheques payable to Aston University. 0.5" tapes: UK: 2.50 (one tape), 5.00 (two tapes). Europe: 5.00 (one tape), 9.00 (two tapes). Outside Europe please enquire. 8mm tapes: UK: 1.00, Europe: 2.00. Quarter-inch cartridges: UK: 1.00, Europe: 2.00. Diskettes: Quantity/Size Europe World UK 1st UK 2nd 18/3.5" 3.10 5.10 1.40 1.10 11/3.5" 1.80 2.90 0.80 0.65 18/5.25" 1.20 2.00 0.60 0.50 11/5.25" 0.80 1.30 0.50 0.35 \section POSTAL ADDRESSES Please include SELF-ADDRESSED ADHESIVE LABELS for return postage. Peter Abbott Information Systems, Aston University, Aston Triangle, Birmingham B4 7ET David Osborne Cripps Computing Centre, University of Nottingham, Nottingham NG7 2RD, UK (for Quarter-inch cartridges ONLY -- include stamps for return postage) \section UK TeX USERS GROUP For details, contact: Geeti Granger, Text Processing Dept, John Wiley & Sons, Baffins Lane, Chichester, W Sussex PO19 1UD (tel: 0243 770329) or David Penfold, Edgerton Publishing Services, 30 Edgerton Road, Edgerton, Huddersfield HD3 3AD (tel: 0484 519462) \bye End of UKTeX Digest [Volume 92 Issue 8] ***************************************